SEARCH · Search NASA

Results for “surface effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Properties of molecular clumps and cores in colliding magnetized flows

ABSTRACT We simulate the formation of molecular clouds in colliding flows of warm neutral medium with the adaptive mesh refinement code flash in eight simulations with varying initial magnetic field strength, between 0.01–5 μG. We include a chemical network to treat heating and cooling and to follow the formation of molecular gas. The initial magnetic field strength influences the fragmentation of the forming cloud because it prohibits motions perpendicular to the field direction and hence impacts the formation of large-scale filamentary structures. Molecular clump and core formation occurs anyhow. We identify 3D clumps and 3D cores, which are defined as connected, CO-rich regions. Additionally, 3D cores are heavily shielded. While we do not claim those 3D objects to be directly comparable to observations, this enables us to analyse their full virial state. With increasing field strength, we find more fragments with a smaller average mass; yet the dynamics of the forming clumps and cores only weakly depends on the initial magnetic field strength. The molecular clumps are mostly unbound, probably transient objects, which are weakly confined by ram pressure or thermal pressure, indicating that they are swept up by the turbulent flow. They experience significant fluctuations in the mass flux through their surface, such that the Eulerian reference frame shows a dominant time-dependent term due to their indistinct nature. We define the cores to encompass highly shielded molecular gas. Most cores are in gravitational-kinetic equipartition and are well described by the common virial parameter $\alpha _\mathrm{vir}$, while some undergo minor dispersion by kinetic surface effects.

Weis, M. (ORCID:0000000256838860)↗

DOE OSTI2021

Electronic nature of chiral charge order in the kagome superconductor CsV 3 Sb 5

Kagome superconductors with T C up to 7 K have been discovered for over 40 y. Recently, unconventional chiral charge order has been reported in kagome superconductor KV 3 Sb 5 , with an ordering temperature of one order of magnitude higher than the T C . However, the chirality of the charge order has not been reported in the cousin kagome superconductor CsV 3 Sb 5 , and the electronic nature of the chirality remains elusive. In this paper, we report the observation of electronic chiral charge order in CsV 3 Sb 5 via scanning tunneling microscopy (STM). We observe a 2 × 2 charge modulation and a 1 × 4 superlattice in both topographic data and tunneling spectroscopy. 2 × 2 charge modulation is highly anticipated as a charge order by fundamental kagome lattice models at van Hove filling, and is shown to exhibit intrinsic chirality. We find that the 1 × 4 superlattices form various small domain walls, and can be a surface effect as supported by our first-principles calculations. Crucially, we find that the amplitude of the energy gap opened by the charge order exhibits real-space modulations, and features 2 × 2 wave vectors with chirality, highlighting the electronic nature of the chiral charge order. STM study at 0.4 K reveals a superconducting energy gap with a gap size 2Δ = 0.85 meV, which estimates a moderate superconductivity coupling strength with 2Δ/k B T C = 3.9. Furthermore, when further applying a c-axis magnetic field, vortex core bound states are observed within this gap, indicative of clean-limit superconductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2025

Electric field driven domain wall dynamics in BaTiO 3 nanoparticles

We report a detailed investigation into the response of single BaTiO 3 (BTO) nanocrystals under applied electric fields (E-field) using Bragg coherent diffraction imaging. Our study reveals pronounced domain wall migration and expansion of a sample measure under applied electric field. The changes are most prominent at the surface of the nanocrystal, where the lack of external strain allows greater domain wall mobility. The observed domain shifts are correlated to the strength and orientation of the applied E-field, following a side-by-side domain model from Suzana []. Notably, we identified a critical electric field strength of 3 MV/m, which leads to irreversible structural changes, suggesting plastic deformation. The findings highlight how surface effects and intrinsic defects contribute to the enhanced dielectric properties of BTO at the nanoscale, in contrast to bulk materials, where strain limits domain mobility. These findings deepen our understanding of nanoscale dielectric behavior and inform the design of advanced nanoelectronic devices. Published by the American Physical Society 2025

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2016

Magnetic ground state of Sr 2 IrO 4 and implications for second-harmonic generation

The currently accepted magnetic ground state of Sr 2 IrO 4 (the -++- state) preserves inversion symmetry. This is at odds, though, with recent experiments that indicate a magnetoelectric ground state, leading to the speculation that orbital currents or more exotic magnetic multipoles might exist in this material. In this paper, we analyze various magnetic configurations and demonstrate that two of them, the magnetoelectric -+-+ state and the nonmagnetoelectric ++++ state, can explain these recent second-harmonic generation (SHG) experiments, obviating the need to invoke orbital currents. The SHG-probed magnetic order parameter has the symmetry of a parity-breaking multipole in the -+-+ state and of a parity-preserving multipole in the ++++ state. We speculate that either might have been created by the laser pump used in the experiments. An alternative is that the observed magnetic SHG signal is a surface effect. Finally, we suggest experiments that could be performed to test these various possibilities and also address the important issue of the suppression of the RXS intensity at the L 2 edge.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2016

Comment on “In-depth Plasma-Wave Heating of Dense Plasma Irradiated by Short Laser Pulses”

Sherlock et al. have reported on the heating of solid density targets by collisional damping of wakefields that are driven by relativistic electron bunches generated in relativistic laser matter interaction. Analyzing collisional particle-in-cell simulations they calculate the fast electron current j f inside the plasma by adding contributions from electrons with energies greater than E cut = 50 keV; time-integrating the specific resistive energy deposition η j 2 f they arrive at a temperature profile and compare the result to the one 'measured' in their simulation, defined as the energy of particles with E < 30 keV; the discrepancy is due to collisional damping of wake fields (CDW). Here, we disagree with their metric of fast current, which leads to false conclusions about CDW heating being a volumetric, rather than surface effect.

42 ENGINEERING↗

DOE OSTI2025

Local orthorhombic phase in zirconium oxide nanocrystals: insights from X-ray pair distribution function analysis

Zirconium dioxide (ZrO 2 ) and hafnium dioxide (HfO 2 ) have emerged as promising alternatives to conventional ferroelectric materials. Understanding the crystal phases of these oxides under different conditions is crucial for optimizing their properties. There are several theories for the (anti)ferroelectric properties; however, comprehensive analysis, particularly at the local structure level, is lacking. In this study, we investigate the local structure of ZrO 2 nanocrystals using X-ray pair distribution function (PDF) analysis, revealing an unexpected local orthorhombic distortion irrespective of crystallite size. This finding suggests the potential existence of an intermediate orthorhombic phase during the microscopic switching pathway observed in previous studies. Additionally, we explore the influence of crystallite size and surface effects on the PDF. These results contribute to a deeper understanding of the structural dynamics in ZrO 2 and offer insights for the design of next-generation ferroelectric materials.

Pokratath, Rohan (ORCID:0000000268383939)↗

DOE OSTI2019

Strong Attraction and Adhesion Forces of Dust Particles by System Voltages of Photovoltaic Modules

We report for the first time on direct measurements using atomic force microscopy (AFM) of electric field induced attraction and adhesion forces associated with soiling on photovoltaic (PV) modules. Real dust particles and silica spheres as surrogate to simulating dust particles were glued to AFM probe cantilevers. The electric field induced force (Fes) was measured via AFM force-distance (f-z) curves, where the electric field was generated by applying a voltage (Vs) to a simulated PV module. Fes and van der Waals (Fvw) force contributions could be separated with the f-z curves. The results show that Fes ~2.5 u N on dust particles is ~5 times larger than Fvw ~0.5 u N at even Vs = -100 V (i.e., similar to large-module operating voltages). Fes increases by an order of magnitude as the applied potential increases from Vs = -100 V to Vs = -500 V. These adhesion forces are by far the strongest that we have measured using the AFM technique for 'initial' contact of particles. Furthermore, unlike the more typical short-range forces of Fvw and liquid bridge, Fes extends sub-millimeters to a millimeter beyond the PV module surface, creating large attraction forces to even uncharged dust particles (i.e., via induced dipoles) in the air. These results indicate that the high voltages typically used with PV arrays today will attract more dust particles from the air, hold the dust particles to the surface very strongly, and potentially induce other PV module surface effects, all of which could increase the power production losses because of soiling.

14 SOLAR ENERGY↗

DOE OSTI2021

Towards replacing physical testing of granular materials with a Topology-based Model

In the study of packed granular materials, the performance of a sample (e.g., the detonation of a high-energy explosive) often correlates to measurements of a fluid flowing through it. The “effective surface area,” the surface area accessible to the airflow, is typically measured using a permeametry apparatus that relates the flow conductance to the permeable surface area via the Carman-Kozeny equation. This equation allows calculating the flow rate of a fluid flowing through the granules packed in the sample for a given pressure drop. However, Carman-Kozeny makes inherent assumptions about tunnel shapes and flow paths that may not accurately hold in situations where the particles possess a wide distribution in shapes, sizes, and aspect ratios, as is true with many powdered systems of technological and commercial interest. To address this challenge, we replicate these measurements virtually on micro-CT images of the powdered material, introducing a new Pore Network Model based on the skeleton of the Morse-Smale complex. Pores are identified as basins of the complex, their incidence encodes adjacency, and the conductivity of the capillary between them is computed from the cross-section at their interface. We build and solve a resistive network to compute an approximate laminar fluid flow through the pore structure. Here, we provide two means of estimating flow-permeable surface area: (i) by direct computation of conductivity, and (ii) by identifying dead-ends in the flow coupled with isosurface extraction and the application of the Carman-Kozeny equation, with the aim of establishing consistency over a range of particle shapes, sizes, porosity levels, and void distribution patterns.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Modeling Metallic Fuel using Peridynamics

Based on available modeling and simulation capabilities of peridynamics module in MOOSE framework for oxide fuel, the overall goal of this project is to further develop the peridynamics capabilities for modeling metallic fuel. It includes two major tasks: 1) develop validated scheme to handle the shape tensor singularity due to insufficient active neighbors of a material particle in the peridynamic correspondence model for fracture problems, and 2) develop failure modeling scheme including failure criterion for metallic fuels. Before the peridynamics can be applied to model metallic fuel, the formulation instability of the peridynamic correspondence model should be addressed. The PI first worked on developing new stabilization method to improve the performance of the peridynamic correspondence model and reduce the possibility of getting a singular shape tensor while applying the model for fracture problems. The new stabilization scheme uses bond-associated weight function rather than bond-associated horizon. Compared to bondassociated horizon stabilized method, this new stabilization scheme has better performance with improved prediction accuracy and reduced free surface effect. Using this newly developed stabilization, materials models from BISON can be directly used in peridynamics for metallic fuels, such as fission rate and burnup dependent creep and swell models. Publication of this work is under preparation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2020

Fluorinated Covalent Organic Frameworks: A Novel Pathway to Enhance Hydrogen Sorption and Control Isosteric Heats of Adsorption; HyMARC Seed Project Final Report

Organic framework materials, as a unique sub-class of carbon-based sorbents, have gained increasing attention for promising attributes toward gas storage. Calculations of the hydrogen capacity of optimized frameworks show potential to achieve greater than 60 g/L storage of hydrogen, placing metal-organic frameworks (MOFs) and COFs near the top of the class of porous materials. However, at the ensemble level, poor stacking creates a quasi-amorphous material with low structural integrity and low effective surface area. The chemical versatility of COFs allows for additional methods for producing long-range order that specifically target the inter-layer interactions in COFs but that leave key pore-accessible linker sites open. These modifications (either during synthesis or post-synthetic) enable a host of strategies to both improve crystalline order for more stable and higher surface, as well as add metals with open coordination for enhanced H 2 binding enthalpy.

08 HYDROGEN↗

DOE OSTI2022

Changes to the morphology and coefficient of thermal expansion in HDPE and UHMWPE following irradiation-based crosslinking

This work describes recent findings of the Los Alamos National Laboratory concerning the alterations to polyethylene’s (PE’s) mechanical and chemical properties after crosslinking via gamma irradiation. Three materials were examined as part of this study, including one HDPE and two UHMWPE specimens. Changes to degree of crystallinity (X C ) were qualitatively determined via measurements of density, and results suggest that X C is not necessarily correlated to crosslink density, depending on polymer manufacturing process and treatment following irradiation. TMA data suggests an anisotropic response in linear thermal expansion, and that the response may be more correlated to X C than crosslink density. Finally, FTIR analysis has led to the conclusion that oxidation occurs as a result of irradiation in open air, the degree of oxidation is proportional to the maximum radiation dose received, and that oxidation is largely a surface effect, penetrating no deeper than 1.5 mm. Due to time constraints, a full dataset could not be generated for changes in creep and thermal properties as a result of irradiation, and TMA analysis is only complete for one material tested in this study. These measurements are ongoing and will provide more context to the hypotheses drawn in this work.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Multi-phenomenology Yield Characterization

This report serves as the first delivery of a four-year applied science effort to transform and advance the error bounds for the yield estimate of an explosion. Each year’s delivery will be in this form, culminating in the submission of this work for peer review to a scientific journal. Importantly, the yearly progress reports can then also be viewed as expanding drafts working towards a formal journal article submission. For the first tranche of funding, we collaborated with Air Force Technical Applications Center (AFTAC) scientists to identify unclassified real-world data that demonstrate and validate our advanced error propagation methods. Collaboration includes visits to AFTAC and telecons. For this development, we illustrate the fusion of seismic, acoustic, optical, and surface effect signatures from an explosion. The mathematics and code being adapted to this specific application (Williams et al., 2021) involves physics models of multiple sensor signatures. We have also identified related physics models and have integrated them into code. Current methods of underground explosion yield estimation for the Threshold Test Ban Treaty (TTBT) have served the US treaty monitoring mission well for decades. A research objective of the Defense Nuclear Nonproliferation Research and Development (DNN R&D) office of the National Nuclear Security Administration (NNSA) has always been to provide new technical capabilities for monitoring lower thresholds. The general model and error propagation code to be developed in this project is based on significant advances in error modeling and propagation needed to analyze data at lower detection thresholds. The second tranche of funding for this project began on May 1, 2022, and planned work for the second tranche includes: i) completing the integration of physical model code into the general error model framework; this code accommodates a wide range of linear/nonlinear source models, fixed/ random effects, and frequentist/Bayesian analyses (the purpose of which is not to dictate to users how to analyze data, but instead to allow users the maximum flexibility in their work); ii) illustrative application of code to identified data, and; iii) initial planning with AFTAC researchers on delivery of code to the Common Development Environment at AFTAC, and continued writing of the planned final journal article submission (year two of this progress report), with particular emphasis on descriptions of data identified for this effort.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

DOE OSTI2024

Synthesizing Highly Crystalline Graphite Powder from Bulk Polyethylene Waste for Lithium-Ion Battery Anodes

Upcycling plastic waste into graphite can potentially be used, in conjunction with other methods, to manage existing waste materials and diversify graphite supply chains. However, synthesizing large quantities of crystalline graphite powder from plastic waste, particularly polyethylene (PE), remains a challenge because PE decomposes into light gases during thermal processing, and simple methods do not exist at any appreciable size scale to address this challenge. In this work, a method is developed for air processing bulk forms of PE waste to create a stable carbon char that does not readily decompose during high-temperature processing. This method employs solid additives in the form of salts, which are combined with the PE melt during air processing to increase the effective surface area of the melt and improve the oxygen-driven chemistry that stabilizes the PE for high-temperature processing. After removing the solid salt additives from the PE-derived char, it is converted into a highly crystalline bulk graphite powder using a Fe-based low-temperature (<1500 °C) catalytic process. The PE-derived graphite powder showed excellent electrochemical performance as an anode material for lithium-ion batteries (LIBs) with a capacity of up to 302 mAh/g at 0.5 discharge/charge cycles per hour (0.5 C) and capacity retention of 100% after 415 cycles.

Huynh, Ngoc Tien↗

DOE OSTI2024

Upcycling Low Linear Density Polyethylene Waste into Turbostratic Graphene for High Mass Loading Supercapacitors

In this work, LLDPE was upcycled into a high quality turbostratic graphene using a pre-treatment step to oxidatively crosslink the polymer with the assistance of solid additives (KCl and K2CO3) that improve crosslinking by increasing the effective surface area of the polymer melt during processing. After this pretreatment step, the crosslinked polymer could then be carbonized and catalytically graphenized between 400-950 °C without complete decomposition of the material. The LLDPE derived graphene (LLDPE-G) obtained from this process has a Brunauer–Emmett–Teller (BET) specific surface area, up to 1800 m2g-1 and average Raman ID/IG and I2D/IG ratios of 0.85 and 0.57, respectively, indicating high quality graphene. When used as an electrode material in symmetric supercapacitors, LLDPE-G possesses an outstanding specific capacitance up to 175 Fg-1 at a mass loading of 20 mgcm-2, which is two times the commercial requirement, yielding an excellent areal capacitance of 3.5 Fcm-2. Moreover, LLDPE-G exhibits exceptional cycling stability with a capacitance retention of 95.8% after 100,000 cycles at a current density of 4.0 Ag-1. Additionally, the KCl and K2CO3 were recycled and reused over 3 complete cycles to make new LLDPE-G with the material quality and electrocapacitive performance retained and verified after each cycle. Our approach creates new opportunities for upcycling not only waste LLDPE but also other varieties of PE to high value graphene materials.

Gao, Yuan [NETL Site Support Contractor, National ↗

DOE OSTI2024

Synthesizing Highly Crystalline Graphite Powder from Bulk Polyethylene Waste for Lithium-Ion Battery Anodes

Huynh, Ngoc Tien [NETL Site Support Contractor, Na↗

DOE OSTI2025

Upcycling Polyethylene Waste Into Hybrid Graphitic Porous Carbon Materials Used in High-Performance Zinc-Ion Hybrid Capacitors

Polyethylene (PE) waste is a challenge to upcycle into useful materials because this plastic tends to decompose into volatile compounds when heated at relatively low temperatures. In this work, we report a chemical process that addresses this challenge by converting mixtures of linear low-density polyethylene (LLDPE), low-density polyethylene (LDPE), and high-density polyethylene (HDPE) waste into a hybrid graphitic porous carbon (HGPC) that can be used as a zinc-ion hybrid capacitor cathode. The process uses a low temperature thermal oxidation pre-treatment step, with assistance of an inert solid additive (KCl) to increase the effective surface area of the PE melt, to functionalize, cross-link, and stabilize the PE waste followed by carbonization and catalytic graphitization steps at higher temperatures with a potassium carbonate (K2CO3) catalyst. The PE waste derived HPGC (PW-HPGC) has a hybrid structure composed of graphene-like carbon nanosheets grown on the surface of carbon particles, high porosity with the Brunauer–Emmett–Teller (BET) specific surface area up to 1,763 m2g-1, and good graphitic degree with average Raman I2D/IG ratios of 0.53. When used as a cathode material for zinc-ion hybrid capacitors, this PW-HGPC exhibits an excellent specific capacity up to 126.7 mAhg-1 at high mass loading of 10 mgcm-2. Moreover, PW-HGPC exhibits remarkable cycling stability with capacity retention of >94% after 10,000 cycles at a current density of 2.0 A g-1.

hybrid graphitic porous carbon↗

DOE OSTI2022

Altering the Supply of Shielding Gases to Fabricate Distinct Geometry in GMA Additive Manufacturing

Wire arc additive manufacturing (WAAM) is the process by which large, metallic structures are built, layer-by-layer, using a welding arc to melt wire feedstock. In this process, the proper selection of the shielding gas plays a vital role in the achievement of structurally acceptable part geometries and quality surface finishes. In this study, the authors used either a ternary mix (He, Ar and CO 2 ) or a binary mix (Ar and CO 2 ) of shielding gases to deposit wall geometries using an open loop-controlled WAAM system developed at Oak Ridge National Laboratory’s Manufacturing Demonstration Facility. The binary blend produced a wider and shorter geometry, while the ternary blend resulted in a narrower build that was more equivalent to the CAD geometry. The data indicated that the binary blend provided a higher oxygen concentration in the weld as compared to that of the ternary blend. The results imply that the arc characteristics and heat input had a significantly higher impact on the weld penetration than the surface tension effect of surface active elements. This was further verified by developing and applying a high-fidelity computational fluid dynamics (CFD) model of the thermophysical properties of gas mixtures. The results from the model showed that, while the influence of increased oxygen concentration on the surface tension for the binary blend led to a deeper penetration, the ternary blend gave rise to heat flux to the workpiece.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Seismic Observations of the OSIRIS-REx Sample Return Capsule Reentry: Deployment, Signal Characteristics, and Wavefield Phenomenology

Controlled spacecraft reentries from interplanetary trajectories provide rare, well-characterized hypersonic sources for advancing seismoacoustic observation techniques. Here we present seismic observations of the OSIRIS-REx sample return capsule (SRC) reentry on 24 September 2023, recorded by 16 three-component nodal seismometers deployed near Eureka, Nevada, at ground distances of 7–20 km from the capsule trajectory. Air-to-ground coupled signals are detected at all stations, exhibiting impulsive onsets consistent with ballistic shock arrivals from the descending Mach cone. We characterize the seismic wavefield through signal amplitude, period, waveform cross-correlation, and array processing. Signal periods decrease systematically with increasing distance from the trajectory within the airport array, indicating that higher-frequency content becomes more prominent at greater offsets, opposite to expectations from geometric spreading and atmospheric absorption. Seismic array processing identifies frequency-dependent back-azimuth variations whose origin remains unresolved; possible contributing factors include source geometry, scattering by fine-scale layered structure in the stratosphere, and near-surface effects. These observations document a spatially complex seismic wavefield from a well-characterized hypersonic line source and provide constraints for future modeling of atmospheric propagation and air-to-ground coupling.

OSIRIS-REx↗