Search NASA⌕ Search

SEARCH · Search NASA

Results for “variational methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Fundamental High-Pressure Calibration from All-Electron Quantum Monte Carlo Calculations

We develop an all-electron quantum Monte Carlo (QMC) method for solids that does not rely on pseudopotentials, and use it to construct a primary ultra-high-pressure calibration based on the equation of state of cubic boron nitride. We compute the static contribution to the free energy with the QMC method and obtain the phonon contribution from density functional theory, yielding a high-accuracy calibration up to 900 GPa usable directly in experiment. We compute the anharmonic Raman frequency shift with QMC simulations as a function of pressure and temperature, allowing optical pressure calibration. In contrast to present experimental approaches, small systematic errors in the theoretical EOS do not increase with pressure, and no extrapolation is needed. This all-electron method is applicable to first-row solids, providing a new reference for ab initio calculations of solids and benchmarks for pseudopotential accuracy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Comparison of dynamic crystallization techniques on Apollo 15 quartz normative basalts

The paper compares dynamic crystallization techniques used on Apollo 15 quartz normative basalts which show differences related to their method. The variation of pyroxene core major element chemistry with cooling rate is confirmed, and it is shown that the Fe loss from liquid is shifted toward the En-Di joint; it is suggested that the nucleation temperature and breakdown of equilibrium partitioning as a function of cooling rate dictate the core composition. It is concluded that the different crystallization behavior that results from the Fe-capsule and Fe-loop container methods is related to the nucleation kinetics.

Lofgren, G. E.↗

Charge redistribution in core-shell nanoparticles to promote oxygen reduction

Bimetallic core-shell nanoparticles are a class of near-surface alloy catalyst for which there is a high degree of control over size and composition. A challenge for theory is to understand the relationship between their structure and catalytic function and provide guidelines to design new catalysts that take advantage of material properties arising at the nanoscale. In this work, we use density functional theory to calculate the energetics of oxygen dissociative adsorption on 1 nm Pd-shell nanoparticles with a series of core metals. The barrier for this reaction and the binding energy of atomic oxygen is found to correlate well with the d-band level of the surface electrons. Noble metal cores lower the barrier and increase the binding, reducing the activity of the Pd-shell as compared to Pt. Reactive core metals such as Co and Mo, on the other hand, lower the d-band of the shell with respect to the Fermi level, giving the Pd-shelled particles oxygen reduction kinetics similar to that of Pt. While both ligand and strain effects determine the d-band center of the Pd shell, a greater surface relaxation reduces the strain in nanoparticles as compared to single-crystal near-surface alloys. Charge redistribution between core and shell then becomes an important factor for lowering the d-band center of Pd-shelled particles and increasing their activity for the oxygen reduction reaction.

36 MATERIALS SCIENCE↗

Adsorption properties versus oxidation states of rutile TiO{sub 2}(110)

Using density functional theory we have studied the adsorption properties of different atoms and molecules deposited on a stoichiometric, reduced, and oxidized rutile TiO{sub 2}(110) surface. Depending on the oxidation state of the surface, electrons can flow from or to the substrate and, therefore, negatively or positively charged species are expected. In particular, we have found that a charge transfer process from or to the surface always occurs for highly electronegative or highly electropositive species, respectively. For atoms or molecules with intermediate electron affinity, the direction of the charge flow depends on the oxidation state of the rutile surface and on the adsorption site. Generally, the charging effect leads to more stable complexes. However, the increase in the binding energy of the adsorbates is highly dependent on the electronic states of the surface prior to the adsorption event. In this work we have analyzed in details these mechanisms and we have also established a direct correlation between the enhanced binding energy of the adsorbates and the induced gap states.

36 MATERIALS SCIENCE↗

Enhanced visible-light photocatalytic activity of anatase TiO{sub 2} through N and S codoping

The density of states and optical properties of N, S, and (N, S)-doped anatase TiO{sub 2} are calculated based on the density functional theory. The results indicate that the doping S atoms occupy the Ti-atom sites in anatase TiO{sub 2} lattice. The mixing of O 2p, N 2p, S 3p, and Ti 3d states in the forbidden gap of (N, S)-codoped TiO{sub 2} can result in the higher visible-light photocatalytic activities than those monodoped TiO{sub 2}. For comparison, (N, S)-codoped TiO{sub 2} was also synthesized by one-step hydrothermal method, and the optical absorption spectra obtained by experiments verified the reliability of our calculation.

36 MATERIALS SCIENCE↗

Simulation of laser-induced coupled electron-nuclear dynamics and time-resolved harmonic spectra in complex systems

We present a theoretical approach for the simulation of time-resolved harmonic spectra, including the effect of nuclear dynamics, which is applicable to complex systems involving many nuclear degrees of freedom. The method is based on the combination of our semiclassical field-induced surface hopping approach for the treatment of laser-induced nuclear dynamics with the time-dependent density functional theory for electron dynamics. We apply our method to the simulation of ultrafast nonadiabatic dynamics and time-resolved harmonic spectra in small silver clusters (Ag{sub 2} and Ag{sub 8}), which exhibit discrete molecularlike electronic transitions. We demonstrate that the harmonic signal is highly sensitive to the nuclear dynamics and thus can be used as a probe of coupled electron-nuclear dynamics, which is complementary to common pump-probe methods such as time-resolved photoelectron spectroscopy. Our simulations allowed us also to determine the mechanism and the time scale of nonradiative relaxation in the 'magic' Ag{sub 8} cluster and have provided a fundamental insight into ultrafast dynamics of metal nanoclusters in the size regime where 'each atom counts'. The excited-state dynamics of Ag{sub 8} involves an isomerization process from the initial structure with T{sub d} symmetry to the quadratic antiprism structure with D{sub 4d} symmetry which takes place on a time scale of {approx}3600 fs and is clearly identified in a time-resolved harmonic signal. Our theoretical approach is generally applicable for the prediction of time-resolved harmonic spectra in complex systems with many nuclear degrees freedom and should serve to stimulate new ultrafast experiments utilizing harmonic signals as a probe for nonadiabatic processes in molecular systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure and properties of surface and subsurface defects in graphite accounting for van der Waals and spin-polarization effects

The geometries, formation energies, and diffusion barriers of surface and subsurface intrinsic defects in graphite are calculated using spin-polarized density-functional theory and the generalized gradient approximation with a semiempirical van der Waals (vdW) correction for dispersion interactions. The calculated formation energies and diffusion barriers of subsurface interstitial (I) atoms deviate qualitatively and quantitatively from those of surface adatoms. The same trend is found also for subsurface and adatom clusters (I{sub 2},I{sub 3}). In spite of the semiquantitative agreement on the optimized geometries, the formation energies and diffusion barriers of surface and subsurface vacancies (V), divacancies (VV), and intimate (I-V) Frenkel pairs differ significantly from the values for the analogous defects in the bulk of graphite. This suggests limited transferability of the bulk and subsurface defect models to the surface of graphite. These findings are rationalized in terms of the balance between the covalent and vdW interaction terms at the surface, subsurface, and bulk of graphite. Finally, pairing of individual defects (adatoms, I and V) is calculated to be energetically advantageous both on the surface and in the subsurface regions. This process is shown to either saturate residual dangling bonds or produce singlet spin states, thus contributing to the quenching of residual spin polarization from damaged graphite surfaces.

36 MATERIALS SCIENCE↗

Time-odd mean fields in covariant density functional theory: Nonrotating systems

Time-odd mean fields (nuclear magnetism) are analyzed in the framework of covariant density functional theory (CDFT) by blocking the single-particle states with a fixed signature. It is shown that they always provide additional binding to the binding energies of odd-mass nuclei. This additional binding only weakly depends on the relativistic mean-field parametrization, reflecting good localization of the properties of time-odd mean fields in CDFT. The underlying microscopic mechanism is discussed in detail. Time-odd mean fields affect odd-even mass differences. However, our analysis suggests that the modifications of the strength of pairing correlations required to compensate for their effects are modest. In contrast, time-odd mean fields have a profound effect on the properties of odd-proton nuclei in the vicinity of the proton drip line. Their presence can modify the half-lives of proton emitters (by many orders of magnitude in light nuclei) and considerably affect the possibilities of their experimental observation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Natural equilibria in steady-state neutron diffusion with temperature feedback

The critical diffusion equation with feedback is investigated within the context of steady-state multiphysics. It is proposed that for critical configurations there is no need to include the multiplication factor k in the formulation of the diffusion equation. This is notable because exclusion of k from the coupled system of equations precludes the mathematically tenuous notion of a nonlinear eigenvalue problem. On the other hand, it is shown that if the factor k is retained in the diffusion equation, as is currently common practice, then the resulting problem is equivalent to the constrained minimization of a functional representing the critical equilibrium of neutron and temperature distributions. The unconstrained solution corresponding to k = 1 represents the natural equilibrium of a critical system at steady-state. Computational methods for solving the constrained problem (with k) are briefly reviewed from the literature and a method for the unconstrained problem (without k) is outlined. A numerical example is studied to examine the effects of the constraint in the nonlinear system. (authors)

97 MATHEMATICS AND COMPUTING↗

Photocatalytic splitting of water under visible-light irradiation over the NiOx-loaded Sm{sub 2}InTaO{sub 7} with 4f-d{sup 10}-d{sup 0} configuration

A new visible-light-response photocatalyst Sm{sub 2}InTaO{sub 7} with 4f-d{sup 10}-d{sup 0} configuration crystallized in a cubic system with the space group Fd3m was synthesized by a solid-state reaction method. NiOx-loaded Sm{sub 2}InTaO{sub 7} showed high photocatalytic activities for H{sub 2} evolution from pure water under visible light irradiation (lambda>400 nm). Changes in the photocatalytic activity with the calcination temperature of Sm{sub 2}InTaO{sub 7} and the amount of NiOx loaded indicated that the combination of highly crystallized Sm{sub 2}InTaO{sub 7} and a high dispersion of NiOx particles led to high photocatalytic activity. The high photocatalytic performance of NiOx-loaded Sm{sub 2}InTaO{sub 7} supported the existing view that the photocatalytic activity correlated with the lattice distortion. Density functional theory calculation indicated that strong dispersion from the hybridized In 5s 5p orbitals at the bottom of the conduction band was responsible for the high activity of photocatalyst Sm{sub 2}InTaO{sub 7}. - Graphical abstract: A new visible-light-response photocatalyst Sm{sub 2}InTaO{sub 7} with 4f-d{sup 10}-d{sup 0} configuration was developed. DFT calculation indicated that strong dispersion from the hybridized In 5s 5p orbitals was responsible for the high photocatalytic activity.

36 MATERIALS SCIENCE↗

Structural, optoelectronic, infrared and Raman spectra of orthorhombic SrSnO{sub 3} from DFT calculations

Orthorhombic SrSnO{sub 3} was investigated using density functional theory (DFT) considering both the local density and generalized gradient approximations, LDA and GGA, respectively. The electronic band structure, density of states, complex dielectric function, optical absorption, and the infrared and Raman spectra were computed. Calculated lattice parameters are close to the experimental measurements, and an indirect band gap E(S{yields}{Gamma})=1.97eV (2.27 eV) was obtained within the GGA (LDA) level of calculation. Effective masses for holes and electrons were estimated, being very anisotropic in comparison with similar results for orthorhombic CaSnO{sub 3}. The complex dielectric function and the optical absorption of SrSnO{sub 3} were shown to be sensitive to the plane of polarization of the incident light. The infrared spectrum between 100 and 600 cm{sup -1} was obtained, with its main peaks being assigned, and a nice agreement between experimental and theoretical peaks of the Raman spectrum of orthorhombic SrSnO{sub 3} was achieved. -- Graphical abstract: Orthorhombic SrSnO{sub 3}: a view of the unit cell (left) and plots showing the calculated and experimental Raman spectra (right). Display Omitted Research highlights: {yields} We have performed DFT calculations on orthorhombic SrSnO{sub 3} crystals, obtaining their structural, electronical and optical properties. {yields} An indirect band gap was obtained, and anisotropic effective masses were found for both electrons and holes. {yields} The complex dielectric function and the optical absorption of SrSnO{sub 3} were shown to be very sensitive to the plane of polarization of the incident light. {yields} The infrared spectrum between 100 and 600 cm{sup -1} was obtained, with its main peaks being assigned, and a nice agreement between experimental and theoretical peaks of the Raman spectrum was achieved.

36 MATERIALS SCIENCE↗

Electronic structure and anisotropic chemical bonding in TiNF from ab initio study

Accounting for disorder in anatase titanium nitride fluoride TiNF is done through atoms re-distributions based on geometry optimizations using ultra soft pseudo potentials within density functional theory DFT. The fully geometry relaxed structures are found to keep the body centering of anatase (I4{sub 1}/amd No. 141). The new structural setups are identified with space groups I-4m2 No. 119 and Imm2 No. 44 which obey the 'group to subgroup' relationships with respect to anatase. In the ground state Imm2 structure identified from energy differences, TiNF is found semi-conducting with similar density of states features to anatase TiO{sub 2} and a chemical bonding differentiated between covalent like Ti-N versus ionic like Ti-F. Inter-anion N-F bonding is also identified. - Graphical Abstract: The geometry optimized ground state anatase derived TiNF structure with arrangement of open faceted TiN3F3 distorted octahedra. The insert shows the arrangement of octahedra in anatase TiO{sub 2}. Highlights: Black-Right-Pointing-Pointer Original approach of TiNF structure for addressing the electronic band structure. Black-Right-Pointing-Pointer Based on anatase, two different ordering scheme models with geometry optimization. Black-Right-Pointing-Pointer New structures obeying the group{yields}subgroup relationships with Imm2 ground state from energy. Black-Right-Pointing-Pointer In the ground state TiNF is found semi-conducting with similar density of states to anatase TiO{sub 2}. Black-Right-Pointing-Pointer Chemical bonding differentiated between covalent like Ti-N and ionic Ti-F.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Probing the structures of gas-phase rhodium cluster cations by far-infrared spectroscopy

The geometric structures of small cationic rhodium clusters Rh{sub n}{sup +} (n = 6-12) are investigated by comparison of experimental far-infrared multiple photon dissociation spectra with spectra calculated using density functional theory. The clusters are found to favor structures based on octahedral and tetrahedral motifs for most of the sizes considered, in contrast to previous theoretical predictions that rhodium clusters should favor cubic motifs. Our findings highlight the need for further development of theoretical and computational methods to treat these high-spin transition metal clusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Intermediates of CO oxidation on iron oxides: An experimental and theoretical study

Reactions of laser-ablated iron oxides with CO in excess argon are investigated by infrared adsorption spectroscopy and density functional theoretical calculations. The carbonyl iron oxides OFe(CO){sub n} (n= 1-3) and O{sub 2}Fe(CO){sub m} (m= 1, 2) are generated during sample deposition or annealing, whereas CO{sub 2} is greatly produced at the expense of these carbonyl iron oxides upon UV irradiation, showing the formation of intermediate carbonyl iron oxides in the oxidation of carbon monoxide to carbon dioxide. These intermediate carbonyl iron oxides are characterized on the basis of isotopic substitution, stepwise annealing, change of CO concentration and laser energy, and comparison with theoretical calculations. The overall agreement between the experimental and calculated vibrational frequencies, relative absorption intensities, and isotopic shifts supports the identification of these complexes from the matrix infrared spectra. The reaction pathways for the formation of the products are proposed based on the experimental and theoretical results presented.

36 MATERIALS SCIENCE↗

Compton Profile Study of Intermetallic Ti{sub 3}Al

The Compton scattering measurement on intermetallic alloy Ti{sub 3}Al is reported in this work. The measurement is made using 59.54 keV gamma-rays from Am{sup 241} source. Theoretical calculation of Compton profile is also performed employing CRYSTAL code within the framework of density functional theory to compare with the measurement. The theoretical profile of the alloy is also synthesized following the superposition model taking the published Compton profiles of elemental solids from the APW method. The experimental study of charge transfer in the alloys has also been done by performing the experimental Compton profile measurements on Ti and Al following the superposition model and charge transfer from Al to Ti is clearly seen on the alloy formation.

36 MATERIALS SCIENCE↗

Time-dependent density-functional-theory calculation of strong-field ionization rates of H{sub 2}

We report a numerical study of strong-field ionization rates of the H{sub 2} molecule using time-dependent density-functional theory (TDDFT). In the dc field limit, TDDFT results for the rate of tunneling ionization agree with molecular Ammosov-Delone-Kralnov (MO-ADK) predictions, as well as results from a complex scaling method at the full configuration interaction level. Our study demonstrates the effect of photon energy, molecular vibration, and orientation on the ionization. Calculated rates for 800-nm lasers are about four times greater than the values predicted by the slowly varying field approximation for tunneling ionization. The rate for the ground vibrational state is higher than that of the fixed nuclei value at the equilibrium distance. This difference decreases with increasing field intensity. When the field intensity is sufficiently high, the two rates are very similar, and the fixed nuclear distance rate may be used to approximate the ground-vibrational-state rate. TDDFT methods predict an anisotropy slightly larger than the prediction obtained from the MO-ADK method. We also find that the field intensity plays a role in the anisotropy, which the MO-ADK results do not show.

74 ATOMIC AND MOLECULAR PHYSICS↗

Technical Note: Cortical thickness and density estimation from clinical CT using a prior thickness-density relationship

Purpose: Cortical thickness and density are critical components in determining the strength of bony structures. Computed tomography (CT) is one possible modality for analyzing the cortex in 3D. In this paper, a model-based approach for measuring the cortical bone thickness and density from clinical CT images is proposed. Methods: Density variations across the cortex were modeled as a function of the cortical thickness and density, location of the cortex, density of surrounding tissues, and imaging blur. High resolution micro-CT data of cadaver proximal femurs were analyzed to determine a relationship between cortical thickness and density. This thickness-density relationship was used as prior information to be incorporated in the model to obtain accurate measurements of cortical thickness and density from clinical CT volumes. The method was validated using micro-CT scans of 23 cadaver proximal femurs. Simulated clinical CT images with different voxel sizes were generated from the micro-CT data. Cortical thickness and density were estimated from the simulated images using the proposed method and compared with measurements obtained using the micro-CT images to evaluate the effect of voxel size on the accuracy of the method. Then, 19 of the 23 specimens were imaged using a clinical CT scanner. Cortical thickness and density were estimated from the clinical CT images using the proposed method and compared with the micro-CT measurements. Finally, a case-control study including 20 patients with osteoporosis and 20 age-matched controls with normal bone density was performed to evaluate the proposed method in a clinical context. Results: Cortical thickness (density) estimation errors were 0.07 ± 0.19 mm (−18 ± 92 mg/cm{sup 3}) using the simulated clinical CT volumes with the smallest voxel size (0.33 × 0.33 × 0.5 mm{sup 3}), and 0.10 ± 0.24 mm (−10 ± 115 mg/cm{sup 3}) using the volumes with the largest voxel size (1.0 × 1.0 × 3.0 mm{sup 3}). A trend for the cortical thickness and density estimation errors to increase with voxel size was observed and was more pronounced for thin cortices. Using clinical CT data for 19 of the 23 samples, mean errors of 0.18 ± 0.24 mm for the cortical thickness and 15 ± 106 mg/cm{sup 3} for the density were found. The case-control study showed that osteoporotic patients had a thinner cortex and a lower cortical density, with average differences of −0.8 mm and −58.6 mg/cm{sup 3} at the proximal femur in comparison with age-matched controls (p-value < 0.001). Conclusions: This method might be a promising approach for the quantification of cortical bone thickness and density using clinical routine imaging techniques. Future work will concentrate on investigating how this approach can improve the estimation of mechanical strength of bony structures, the prevention of fracture, and the management of osteoporosis.

60 APPLIED LIFE SCIENCES↗

Electronic structure and chemical bonding of {alpha}- and {beta}-CeIr{sub 2}Si{sub 2} intermediate valence compounds

The dimorphism of the intermediate valence ternary cerium silicide CeIr{sub 2}Si{sub 2} in the ThCr{sub 2}Si{sub 2} ({alpha}) and CaBe{sub 2}Ge{sub 2} ({beta}) modifications is addressed in the framework of the density functional theory. The geometry optimization is in good agreement with the experiment and the subsequent establishment of the energy-volume equation of state (EOS) indicates a stabilization of the {beta}-type relative to the {alpha}-type concomitant with the trend of the cerium valence, changing to tetravalent in {beta}-CeIr{sub 2}Si{sub 2}. This is equally shown from the site projected DOS and from the large increase of the electronic contribution to the specific heat. The chemical bonding indicates the strongest bonding interactions within the Ir-Si substructure in both varieties. Stabilization of {beta}-CeIr{sub 2}Si{sub 2} with almost tetravalent cerium is in good agreement with Th{sup IV}Ir{sub 2}Si{sub 2} which exclusively crystallizes in the CaBe{sub 2}Ge{sub 2} type. The EOS behavior of different RIr{sub 2}Si{sub 2} (R=Th, Ce, La) is comparatively discussed. - Graphical abstract: The crystal structures of {alpha}- and {beta}-CeIr{sub 2}Si{sub 2}. Relevant interatomic distances (A), the three-dimensional [Ir{sub 2}Si{sub 2}] networks and the crystallographically independent iridium and silicon sites are indicated. Highlights: Black-Right-Pointing-Pointer Energy stabilization of (HT) {beta}-CeIr{sub 2}Si{sub 2} versus (LT) {alpha}-CeIr{sub 2}Si{sub 2} from DFT methods. Black-Right-Pointing-Pointer Concomitant with the change of Ce valence to tetravalent (HT)-enhanced specific heat. Black-Right-Pointing-Pointer Equations of states for La, Ce and Th members with CeIr{sub 2}Si{sub 2} resembling tetravalent-Th. Black-Right-Pointing-Pointer Chemical bonding shows changes on the {l_brace}Ir{sub 2}Si{sub 2}{r_brace} intralayer and Ce{sup IV}-Ir bonds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗