Search NASA⌕ Search

SEARCH · Search NASA

Results for “Data Plotting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

PARETO 0.3.0 Release

PARETO 0.3.0 Release. Highlights: - Fixing Warning in get_data - Clean up of old main function which has been replaced by the run files - Adding plot_scatter() function - Support node capacity - Add Gurobi troubleshooting files to gitignore by @melody-shellman - Set slacks to zero - Water treatment case study - Fix defaultvalue treatement - Fix bug for incorrect number of input arguments in water quality - Pipeline configs documentation - Enable rendering Unicode characters in ReadTheDocs PDF builds - Adding support for units - Add discrete water quality to the model - Updating documentation for strategic model, and corresponding fixes to strategic model - Rework getting started docs build section and more - Enable Codecov reports in CI builds - Correct error in CompletionsPadSupplyBalanceRule

PARETO,PSE,Process Systems Engineering,Produced wa↗

Report on 240 Am(n,x) surrogate cross section test measurement

The main goal of the test measurement was to determine the feasibility of the 243 Am(p,t) reaction as a surrogate for 240 Am(n,f). No data cross section data exists for neutron induced reactions on 240 Am; the half-life of this isotope is only 2.1 days making direct measurements difficult, if not impossible. The 48-hour experiment was conducted using the STARS/LIBERACE experimental facility located at the 88 Inch Cyclotron at Lawrence Berkeley National Laboratory in August 2011. A description of the experiment and results is given. The beam energy was initially chosen to be 39 MeV in order to measure an equivalent neutron energy range from 0 to 20 MeV. However, the proton beam was not stopped in the farady cup and the beam was deposited in the surrounding shielding material. The shielding material was not conductive, and a beam current, needed for proper tuning of the beam as well as experimental monitoring, could not be read. If the 240 Am(n,f) surrogate experiment is to be run at LBNL, simple modifications to the beam collection site will need to be made. The beam energy was reduced to 29 MeV, which was within an energy regime of prior experiments and tuning conditions at STARS/LIBERACE. At this energy, the beam current was successfully tuned and measured. At 29 MeV, data was collected with both the 243 Am and 238 U targets. An example particle identification plot is shown in Fig. 1. The triton-fission coincidence rate for the 243 Am target and 238 U target were measured. Coincidence rates of 0.0233(1) cps and 0.150(6) cps were observed for the 243 Am and 238 U targets, respectively. The difference in count rate is largely attributed to the available target material - the 238 U target contains approximately 7 times more atoms than the 243 Am. A proton beam current of ~0.7 nA was used for measurements on both targets. Assuming a full experimental run under similar conditions, an estimate for the run time needed was made. Figure 2 shows the number of days needed as a function of acceptable uncertainty for a measurement of 1-20 MeV equivalent neutron energy, binned into 200 keV increments. A 5% measurement will take 3 days for U, but 20 days for Am. It may be difficult to be the sole user of the LBNL cyclotron, or another facility, for such an extended period. However, a 10% measurement will take 19 hours for U, and 5 days for Am. Such a run period is more reasonable and will allow for the first ever measurement of the 240 Am(n,f) cross section. We also anticipate 40% more beam time being available at Texas A&M Cyclotron Institute compared to LBNL in FY2012. The increased amount of beam time will allow us to accumulate better statistics then what would have been available at LBNL.

43 PARTICLE ACCELERATORS↗

Assessment of the Environmental Impacts of Coalbed Methane Development in the Powder River Basin - Use of Coalbead Methane Produced Water for Cropland Irrigation

Water quality is a major concern with regard to development of coalbed methane (CBM) in the Powder River Basin, Wyoming. Large quantities of water are being produced and discharged as a by-product in the process of releasing natural gas from coal. Current practices of discharging large volumes of water into drainage channels or using it to irrigate cropland areas has the potential to elevate salinity and sodicity in soils. Elevated salinity affects the ability of plants to uptake water to facilitate biochemical processes such as photosynthesis and plant growth. Elevated sodicity in irrigation water adversely affects soil structure necessary for water infiltration, nutrient supply, and aeration. Salinity and sodicity concentrations are important in that a sodic soil can maintain its structure if the salinity level is maintained above the threshold electrolyte concentration. In this study, cropland soil and CBM water were treated with gypsum and sulfur. Changes in soil chemistry among different treatments were monitored using a split plot experiment. The CBM water used for irrigation had an EC of 1380 {micro}S cm{sup -1} and SAR of 24.3 mmol{sup 1/2} L{sup -1/2}. Baseline and post treatment soil samples were collected to a depth of 60 cm within each study plot, analyzed, and characterized for chemical parameters. Comparisons between Spring 2004 and Fall 2004 soil chemistry data after one irrigation season (using the equivalent of 1 month of irrigation water or {approx}12 inches) indicated that irrigating with Piney Creek water or a 50:50 blend of Piney Creek water and CBM water did not cause SAR values to increase. A combination of using a gypsum amendment to the soil along with a gypsum injection and sulfur burner treatment to the irrigation water resulted in the lowest SAR value in the first soil horizon among treatments irrigated solely with CBM produced water. The SAR value resulting from this combination treatment was 53% lower than using CBM water with no amendments to soil or water. Soil amendments to cores in the laboratory did not increase soil hydraulic conductivity when CBM water was applied.

01 COAL, LIGNITE, AND PEAT↗

Solving Complex Radioactive Decay Chains for Future Assessment and Cleanup Decisions - 17046

In support of U.S. Environmental Protection Agency's on-line calculators for risk and dose assessment, a decay chain tool was developed to address the need to understand how radionuclide activity changes with time as the activity measured in the past will be different from current and future levels. When a radionuclide decays, its activity decreases exponentially as a function of time transforming into a different atom - a decay product. The atoms keep transforming to new decay products until they reach a stable state and are no longer radioactive. The series of decay products created to reach this balance is called the decay chain. For radionuclide chains, the daughter products can have significant implications in dosimetry and remediation. Thus, risk assessors evaluating sites with radioactive contamination need to plan for future progeny ingrowth, in addition to sampled radionuclides. These are important considerations for risk quantification during the characterization and cleanup plans, particularly when sampling may have occurred years before the remediation cleanup work begins. If a radionuclide half-life and current activity are known, then hand-calculating the future activity is straightforward. However, calculating the ingrowth of progeny quickly becomes cumbersome for longer chains such as the Thorium-232 decay series. For the more complex chains where many daughters are formed, possibly with multiple branches, this calculation involves solving a complex set of simultaneous differential equations known as the Bateman Equation. The Decay Chain Activity Projection Tool calculates the activity of radionuclides and their progeny as a function of time. This tool currently uses a combination of Perl, JavaScript, Plot.ly, and jQuery to automatically construct the radionuclide decay chains, solve the resulting Bateman Equation, and provide the user with tabular solution output and plots. Additional software may be used as development advances. The risk assessor can then use the data for exposure assessment and cleanup decisions without further costly sampling. The benefits of providing this calculator are to prevent overestimation of risk due to decay of the parent isotope and to avoid underestimation of risk due to ingrowth of progeny more toxic than the parent. Graphs are provided to show the simultaneous decay rates and ingrowth, as well as tabular output at time-point T and all the decay half-life intervals. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Statistical model selection for better prediction and discovering science mechanisms that affect reliability

Understanding the impact of production, environmental exposure and age characteristics on the reliability of a population is frequently based on underlying science and empirical assessment. When there is incomplete science to prescribe which inputs should be included in a model of reliability to predict future trends, statistical model/variable selection techniques can be leveraged on a stockpile or population of units to improve reliability predictions as well as suggest new mechanisms affecting reliability to explore. We describe a five-step process for exploring relationships between available summaries of age, usage and environmental exposure and reliability. The process involves first identifying potential candidate inputs, then second organizing data for the analysis. Third, a variety of models with different combinations of the inputs are estimated, and fourth, flexible metrics are used to compare them. As a result, plots of the predicted relationships are examined to distill leading model contenders into a prioritized list for subject matter experts to understand and compare. The complexity of the model, quality of prediction and cost of future data collection are all factors to be considered by the subject matter experts when selecting a final model.

97 MATHEMATICS AND COMPUTING↗

Data for Responsiveness of Miscanthus and Switchgrass Yields to Stand Age and Nitrogen Fertilization: A Meta-regression Analysis

The compiled datasets include plot level observations of energy crops (miscanthus and switchgrass) from recent experimental field trials in the US including dry biomass yield, location, state, region, harvest year, growing season degree days (GDD), winter season heating degree days (HDD), growing season cumulative precipitation, annual nitrogen application rate, age of the pant when harvested, National Commodity Crop Productivity Index (NCCPI) values, and cultivar type (switchgrass) from various published and unpublished sources. The stata codes include estimation procedures for four different specifications, i.e., Model A includes deterministic effect without interaction terms; Model B includes deterministic effect with interaction terms (N2, age2, N × age, GDD2, precip2, N × NCCPI); Model C includes deterministic effect with interaction terms, study, and location random effect; Model D includes deterministic effect with interaction terms, harvest year augmented study, and location random effect.

Age↗

First observation of the Charmless Decay B to K π 0 π 0 and Study of its Dalitz Plot Structure

Results for the first measurement of the inclusive branching and CP asymmetry of the charmless 3-body decay B + → K + π 0 π 0 are presented. The analysis uses a data sample with an integrated luminosity of 429.0 fb -1 , recorded by the BABAR detector at the PEP-II asymmetric B Factory. This sample corresponds to 470.9 ±} 2.8 million B$\bar{B}$ pairs. Measurements of the branching fractions (B) and CP asymmetries (A CP ) of some of the intermediate resonances in the K + π 0 π 0 Dalitz plot are also presented.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Molecular Characterization of High Molecular Weight Polyesters by Matrix-Assisted Laser Desorption/Ionization High-Resolution Time-of-Flight Mass Spectrometry Combined with On-plate Alkaline Degradation and Mass Defect Analysis

Matrix-assisted laser desorption ionization high-resolution time-of-flight mass spectrometry (MALDI HR TOF MS) is a powerful tool for the molecular characterization of industrial polymers. However, accurate mass determination and resolution of isobaric ions are possible for oligomer samples only typically below m/z 3000. To cut long polymer chains into oligomers suitable for high-resolution mass spectrometry, we propose a simple “on-plate” alkaline degradation of polyesters as a sample pretreatment technique prior to the MALDI TOF MS measurement. This pretreatment can be performed on a MALDI target using a small amount of sample (μg or less) and 1 μL of alkaline reagent by simple pipetting. Informative mass spectra in the oligomeric mass range are successfully recorded but complicated by the variation of end-groups and the copolymeric composition of the degradation products. Data processing is assisted by a series of advanced Kendrick mass defect (KMD) analyses recently proposed by the authors to plot visually understandable two-dimensional maps. On-plate degradation pretreatment, high-resolution MALDI TOF MS measurements, and advanced KMD analyses are innovatively combined for the compositional characterization of bacterial poly(3-hydroxybutyric acid-co-3-hydroxyvaleric acid) and industrial poly(ethylene terephthalate) samples. .

74 ATOMIC AND MOLECULAR PHYSICS↗

Inelastic Neutron Scattering As an Indication of a New Type of Gapped Surface Excitations in Liquid He

We analyze the experimental data [1] on inelastic neutron scattering by a thin 5-atomic-layer film of liquid helium at three different temperatures: T = 0.4, 0.98, and 1.3 K. These data were partially published previously [2–4], but here we present them in a better quality and at various temperatures. The neutron scattering intensity plots, in addition to the previously know dispersion of phonons and ripplons, suggest a branch of gapped surface excitations with activation energy ~4.5 K and the dispersion similar to that expected for surfons—the bound quantum states of helium atoms above liquid helium surface, proposed and investigated theoretically [5, 6]. These data, probably, provide the first direct experimental confirmation of surfons. Before these surface excitations received only indirect experimental substantiation, based on the temperature dependence of surface tension coefficient [5, 6] and on their interaction with surface electrons [7, 8]. The existence of surfons as an additional type of surface excitations, although being debated yet, is very important for various physical properties of He surface. We also analyze previous numerical results on excitations in liquid helium and argue that surface excitations similar to surfons have been previously obtained by numerical calculations and called resonance interface states [21].

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Using variable-frequency asymmetries to probe the magnetic field dependence of radial transport in a Malmberg-Penning trap

A new experimental technique is used to study the dependence of asymmetry-induced radial particle flux {gamma} on axial magnetic field B in a modified Malmberg-Penning trap. This dependence is complicated by the fact that B enters the physics in at least two places: in the asymmetry-induced first order radial drift velocity v{sub r} = E{sub {theta}}/B and in the zeroth order azimuthal drift velocity v{sub {theta}} = E{sub r}/B. To separate these, we employ the hypothesis that the latter always enters the physics in the combination {omega}-l{omega}{sub R}, where {omega}{sub R} = v{sub {theta}}/r is the column rotation frequency and {omega} and l are the asymmetry frequency and azimuthal mode number, respectively. Points where {omega}-l{omega}{sub R} = 0 are then selected from a {gamma} vs r vs {omega} data set, thus insuring that any function of this combination is constant. When the selected flux {gamma}{sub sel} is plotted versus the density gradient, a roughly linear dependence is observed, showing that this selected flux is diffusive. This linear dependence is roughly independent of the bias of the center wire in our trap {phi}{sub cw}. Since in our experiment {omega}{sub R} is proportional to {phi}{sub cw}, this latter point shows that our technique has successfully removed any dependence on {omega}{sub R} and its derivatives, thus confirming our hypothesis. The slope of a least-squares fitted line through the {gamma}{sub sel} vs density gradient data then gives the diffusion coefficient D{sub 0} under the condition {omega}-l{omega}{sub R} = 0. Varying the magnetic field, we find D{sub 0} is proportional to B{sup -1.33{+-}}{sup 0.05}, a scaling that does not match any theory we know. These findings are then used to constrain the form of the empirical flux equation. It may be possible to extend this technique to give the functional dependence of the flux on {omega}-l{omega}{sub R}.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Data driven discovery and quantification of hyperspectral leaf reflectance phenotypes across a maize diversity panel

Abstract Estimates of plant traits derived from hyperspectral reflectance data have the potential to efficiently substitute for traits, which are time or labor intensive to manually score. Typical workflows for estimating plant traits from hyperspectral reflectance data employ supervised classification models that can require substantial ground truth datasets for training. We explore the potential of an unsupervised approach, autoencoders, to extract meaningful traits from plant hyperspectral reflectance data using measurements of the reflectance of 2151 individual wavelengths of light from the leaves of maize ( Zea mays ) plants harvested from 1658 field plots in a replicated field trial. A subset of autoencoder‐derived variables exhibited significant repeatability, indicating that a substantial proportion of the total variance in these variables was explained by difference between maize genotypes, while other autoencoder variables appear to capture variation resulting from changes in leaf reflectance between different batches of data collection. Several of the repeatable latent variables were significantly correlated with other traits scored from the same maize field experiment, including one autoencoder‐derived latent variable (LV8) that predicted plant chlorophyll content modestly better than a supervised model trained on the same data. In at least one case, genome‐wide association study hits for variation in autoencoder‐derived variables were proximal to genes with known or plausible links to leaf phenotypes expected to alter hyperspectral reflectance. In aggregate, these results suggest that an unsupervised, autoencoder‐based approach can identify meaningful and genetically controlled variation in high‐dimensional, high‐throughput phenotyping data and link identified variables back to known plant traits of interest.

Tross, Michael C.↗

Radiative three-body D -meson decays in and beyond the standard model

We study radiative charm decays D → P 1 P 2γ , P 1,2 = π, K in QCD factorization at leading order and within heavy hadron chiral perturbation theory. Branching ratios including resonance contributions are around ~10 –3 for the Cabibbo-favored modes into Kπγ and ~10 –5 for the singly Cabibbo-suppressed modes into π + π – γ,K + K – γ, and thus in reach of the flavor factories BES III and Belle II. Dalitz plots and forward–backward asymmetries reveal significant differences between the two QCD frameworks; such observables are therefore ideally suited for a data-driven identification of relevant decay mechanisms in the standard-model dominated D → Kπγ decays. This increases the potential to probe new physics with the D → π + π – γ and D → K + K – γ decays, which are sensitive to enhanced dipole operators. CP asymmetries are useful to test the SM and look for new physics in neutral |ΔC| = 1 transitions. Cuts in the Dalitz plot enhance the sensitivity to new physics due to the presence of both s- and t, u-channel intermediate resonances.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Tau-Jet Matching and Tag-and-Probe Tau Tagging Efficiencies for HH→bbτ+τ− Searches Using Run 3 CMS Scouting Data

We are studying tau-jet matching efficiency and tau tagging efficiency for the search for Higgs boson pair production in the HH→bbτ+τ− decay channel using Run 3 CMS scouting data. Collision events in the CMS detector produce many particle candidates, so jets are clustered using the anti-kT algorithm to identify possible tau signatures. In Monte Carlo simulation, tau-jet matching efficiency can be measured by comparing generated taus to reconstructed jets. In actual collision data, however, generated taus are not available, so we use a tag-and-probe method with Z→τ+τ− candidate events. In this method, one tau candidate is used as the tag and the other as the probe. The invariant mass of the tau-pair candidates is plotted and fitted with signal and background functions to estimate the number of real tau events and determine the tagging efficiency. By comparing efficiencies in data and Monte Carlo simulation, this work helps evaluate the performance of scouting-based tau reconstruction and tau tagging for future HH→bbτ+τ− searches.

Bellot, Annella [North Central Coll.; Fermilab]↗

Tau-Jet Matching and Tag-and-Probe Tau Tagging Efficiencies for HH→bbτ+τ− Searches Using Run 3 CMS Scouting Data

We are studying tau-jet matching efficiency and tau tagging efficiency for the search for Higgs boson pair production in the HH→bbτ+τ− decay channel using Run 3 CMS scouting data. Collision events in the CMS detector produce many particle candidates, so jets are clustered using the anti-kT algorithm to identify possible tau signatures. In Monte Carlo simulation, tau-jet matching efficiency can be measured by comparing generated taus to reconstructed jets. In actual collision data, however, generated taus are not available, so we use a tag-and-probe method with Z→τ+τ− candidate events. In this method, one tau candidate is used as the tag and the other as the probe. The invariant mass of the tau-pair candidates is plotted and fitted with signal and background functions to estimate the number of real tau events and determine the tagging efficiency. By comparing efficiencies in data and Monte Carlo simulation, this work helps evaluate the performance of scouting-based tau reconstruction and tau tagging for future HH→bbτ+τ− searches.

Bellot, Annella [North Central Coll.; Fermilab]↗

Vegetation Warming Experiment: Thaw Depth and dGPS locations, Barrow, Alaska, 2018

Thaw depth measurements within and around warming chambers, and at ambient plots. Measurements were taken at the start and end of chamber deployment, and two intermediate times during the 2018 growth season. dGPS measurements of chamber and ambient plot locations. This dataset contains one kmz, two xlsx, and three csv files where the xlsx files have been preserved as csvs for preservation. These data were collected as part of a series of single-season warming experiments on tundra vegetation on the Barrow Environmental Observatory (BEO), Utqiagvik, Alaska. A different plant species was targeted each year, over four experimental years from 2017–2021. Each year, five warming chambers and paired ambient control plots were deployed from around the time of snowmelt in mid-June through to mid-September. Average seasonal warming of 3-4°C was achieved using Zero Power Warming (ZPW) chambers (Lewin et al, 2017).The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research. The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗

COMPASS-FME Terrestrial Ecosystem Manipulation to Probe the Effects of Storm Treatments (TEMPEST) Experiment Tree Inventory

This is the tree inventory (diameter, species, and live/dead status) data from the Terrestrial Ecosystem Manipulation to Probe the Effects of Storm Treatments (TEMPEST) experimental site. This manipulative, ecosystem-scale TEMPEST experiment is part of the COMPASS-FME (Coastal Observations, Mechanisms, and Predictions Across Systems and Scales: Field Measurements and Experiments; see https://compass.pnnl.gov/FME/COMPASSFME) project. It addresses the potential for freshwater and estuarine-water disturbance events to alter tree function, species composition, and ecosystem processes in a deciduous coastal forest in eastern Maryland, USA. The experiment uses a large-unit (2000 m2), un-replicated experimental design, with three 50 m × 40 m plots serving as control, freshwater, and estuarine-water treatments.This dataset includes:- An overall dataset README file.- The tree inventory data in both "wide" and "long" forms. These contain the same information but are structured differently, with the former more useful for human viewers and the latter more amenable for programmatic analyses.- A key to the species/genus codes used, which follow the U.S. Department of Agriculture's PLANTS schema (https://plants.usda.gov/).- A copy of the R code used to generate the wide- and long-form data files.All files are comma-separated value (CSV) and no special software is required to read them.

54 ENVIRONMENTAL SCIENCES↗

ND 2 AV: N-dimensional data analysis and visualization analysis for the National Ignition Campaign

Here, one of the biggest challenges in high-energy physics is to analyze a complex mix of experimental and simulation data to gain new insights into the underlying physics. Currently, this analysis relies primarily on the intuition of trained experts often using nothing more sophisticated than default scatter plots. Many advanced analysis techniques are not easily accessible to scientists and not flexible enough to explore the potentially interesting hypotheses in an intuitive manner. Furthermore, results from individual techniques are often difficult to integrate, leading to a confusing patchwork of analysis snippets too cumbersome for data exploration. This paper presents a case study on how a combination of techniques from statistics, machine learning, topology, and visualization can have a significant impact in the field of inertial confinement fusion. We present the $\mathrm{ND}^2\mathrm{AV}$: N-dimensional data analysis and visualization framework, a user-friendly tool aimed at exploiting the intuition and current workflow of the target users. The system integrates traditional analysis approaches such as dimension reduction and clustering with state-of-the-art techniques such as neighborhood graphs and topological analysis, and custom capabilities such as defining combined metrics on the fly. All components are linked into an interactive environment that enables an intuitive exploration of a wide variety of hypotheses while relating the results to concepts familiar to the users, such as scatter plots. $\mathrm{ND}^2\mathrm{AV}$ uses a modular design providing easy extensibility and customization for different applications. $\mathrm{ND}^2\mathrm{AV}$ is being actively used in the National Ignition Campaign and has already led to a number of unexpected discoveries.

97 MATHEMATICS AND COMPUTING↗

Peak selection matters in Principal Component Analysis: A case study of syntrophic microbes

In situ liquid time-of-flight secondary ion mass spectrometry (ToF-SIMS) is a powerful technique to address surface characterization of living biofilms in hydrated conditions. Principal component analysis (PCA) is an important tool to process a large amount of data and interpret the information from ToF-SIMS spectra. However, ToF-SIMS data analysis is still a great challenge in complicated bacterial biofilms, because many interference peaks from the medium may result in inaccurate interpretation of ToF-SIMS spectral analysis. In this study, two syntrophic Geobacter populations were investigated using in situ liquid ToF-SIMS to reveal the biofilm surface changes between them as due to direct interspecies electron transfer (DIET). Peak overlay is an effective strategy to eliminate the matrix effects in handling complex ToF-SIMS data and was used to accomplish peak selection in this work. Both all peak and selected peak spectral PCA showed a distinctive separation among different samples. However, medium samples occupied high scores values in all peak PCA compared with the selected peak PCA, suggesting a strong interference from the medium as the matrix effect. Amino acids and lipids contributed significantly in separating all samples in selected peak PCA, which indicated that surface membrane components such as pili and proteins are important in the co-cultured Geobacter community compared to controls such as the single population planktonic cells and biofilms, respectively. Additionally, the spectral PCA results of high intensity and high resolution data obtained from liquid ToF-SIMS were compared. Selected peak PCA obtained nice separation among samples in both data sets; however, the high resolution data showed better separation between co-culture planktonics and co-culture aggregates, confirming that the higher mass accuracy is useful in analysis of microbial samples. Furthermore, amino acid and water cluster as an important media for microbial metabolite were selected for a more focused selected peak PCA comparison. Consistent scores and loadings plots were achieved. In conclusion, we show that peak selection is critical for acquiring effective microbial information and interpretation of syntrophic Geobacter using spectral data from in situ liquid ToF-SIMS.

spectral overlay, peak selection, matrix effect, P↗