Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diameter effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Large-Scale Metasurfaces Based on Grayscale Nanosphere Lithography

Metasurfaces, based on subwavelength structuring, provide a versatile platform for wavefront manipulation in an ultrathin form factor. The manufacturing of metasurfaces, however, generally requires fabrication techniques, such as electron-beam lithography, that are not scalable. One alternative is the use of ultraviolet steppers, but these require significant capital investment and there are challenges in handling the large mask sizes that metasurfaces demand due to the structuring density. In this paper, we propose and demonstrate a novel manufacturing method based on self-assembly of nanospheres in combination with grayscale lithography. This technique enables large-scale metasurfaces with nonperiodic phase profiles while being cost-effective. As a proof of concept, we demonstrate a series of large-scale (1 mm diameter) metalenses demonstrating diffraction-limited focusing as well as holograms. This approach could open new doors to cost-effective and large-scale fabrication of a wide range of metasurface-based optics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Proposed hole-target for improving maximum proton energy driven by a short intense laser pulse

By using particle-in-cell simulations, a new method for energetic collimated proton generation via intense short pulse laser-thin foil interactions is presented. To enhance the electron heating efficiency, a small hole is bored at the center of a thin foil target. The small hole combines target heating mechanisms effectively, which results in a high proton maximum energy. While an ultraintense, ultrashort laser pulse propagates through a small hole (diameter<laser spot size), the laser pulse drives electrons pulled out from the hole inner wall effectively inside the hole. When these electrons leave the target, a strong sheath field is formed between the electrons and the target rear surface and this accelerates protons from the rear surface of the target. The effective combination of the laser longitudinal ponderomotive force with the transverse heating (by E field) mechanism results in highly efficient electron heating of the hole target. When the rear part of the hole is filled with a proton-electron contamination layer, energetic collimated protons are produced. The scaling of the maximum proton energy of a hole target over a wide range of laser pulse intensities is presented and compared with that of a simple planar target.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Radiation testing of 2.4 micron wavelength extended InGaAs photodiodes for 100 MeV/n carbon ions

We have successfully tested simultaneously 2.4 Micron Wavelength, Extended InGaAs Photodiodes having diameters of 20, 30, 40, 50, 100, 150, 200, 250, and 290 Micron, coupled with a Single Mode Fiber using 100 MeV/n Carbon (C) Ions up to a cumulative dose of ~40 krad. During irradiation, the devices were maintained at dry ice temperature, reverse biased at 100 mV, and their leakage current was continuously monitored in-situ during the run. After the exposure was completed, all nine devices were monitored for any change in their leakage current at 100 mV and room temperature for several weeks to monitor any annealing effects that may occur. Nine Photodiodes with the above varying diameters were radiated with 100 MeV/n Carbon Ions with a fluence of 10 6 , 10 7 , 10 8 , 10 9 , and 10 10 ions/cm 2 at each fluence level. At 100 MeV/n the Linear Energy Transfer (LET) of Carbon Ion is ~0.156 MeV-cm 2 /mg in Extended InGaAs, which is an order magnitude more than Proton (H) and Helium (He) Ions of 100 MeV/n energy. Thus, significant displacement damage is anticipated in the Extended InGaAs Photodiode with 100 MeV/n Carbon Ions with a total fluence of 1 × 1010 ions/cm 2 . Pre- and Post- radiation results were also measured for: (1) Leakage Current Vs. Voltage for the Extended InGaAs Photodiodes; (2) Responsivity (Quantum Efficiency) in A/W for Photodiodes; and (3) Bandwidth of the Photodiodes. All devices were found to be fully functional at the normal operating conditions and at both dry ice and room temperature. The leakage current increased up to a factor of ~2X at lower bias of 100 mV at the highest fluence of 10 10 ions/cm 2 , but not significantly at higher bias of 2 V. Finally, we did not observe any post radiation annealing effect for leakage current at room temperature and 100 mV bias for any of the devices after several weeks of data logging.

2.4 micron wavelength↗

Experimental observation of electron-phonon coupling enhancement in Sn nanowires caused by phonon confinement effects

Reducing the size of a superconductor below its characteristic length scales can either enhance or suppress its critical temperature ( T c ). Depending on the bulk value of the electron-phonon coupling strength, electronic and phonon confinement effects will play different roles in the modification of T c . Experimentally disentangling each contribution has remained a challenge. We have measured both the phonon density of states and T c of Sn nanowires with diameters of 18, 35, and 100 nm in order to quantify the effects of phonon confinement on superconductivity. Furthermore, we observe a shift of the phonon frequency towards the low-energy region and an increase in the electron-phonon coupling constant that can account for the measured increase in T c .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Two-Piece Screens for Decontaminating Granular Material

Two-piece screens have been designed specifically for use in filtering a granular material to remove contaminant particles that are significantly wider or longer than are the desired granules. In the original application for which the twopiece screens were conceived, the granular material is ammonium perchlorate and the contaminant particles tend to be wires and other relatively long, rigid strands. The basic design of the twopiece screens can be adapted to other granular materials and contaminants by modifying critical dimensions to accommodate different grain and contaminant- particle sizes. A two-piece screen of this type consists mainly of (1) a top flat plate perforated with circular holes arranged in a hexagonal pattern and (2) a bottom plate that is also perforated with circular holes (but not in a pure hexagonal pattern) and is folded into an accordion structure. Fabrication of the bottom plate begins with drilling circular holes into a flat plate in a hexagonal pattern that is interrupted, at regular intervals, by parallel gaps. The plate is then folded into the accordion structure along the gaps. Because the folds are along the gaps, there are no holes at the peaks and valleys of the accordion screen. The top flat plate and the bottom accordion plate are secured within a metal frame. The resulting two-piece screen is placed at the bottom opening of a feed hopper containing the granular material to be filtered. Tests have shown that such long, rigid contaminant strands as wires readily can pass through a filter consisting of the flat screen alone and that the addition of the accordion screen below the flat screen greatly increases the effectiveness of removal of wires and other contaminant strands. Part of the reason for increased effectiveness is in the presentation of the contaminant to the filter surface. Testing has shown that wire type contamination will readily align itself parallel to the material direction flow. Since this direction of flow is nearly always perpendicular to the filter surface holes, the contamination is automatically aligned to pass through. The two-filter configuration reduces the likelihood that a given contaminant strand will be aligned with the flow of material by eliminating the perpendicular presentation angle. Thus, for wires of a certain diameter, a two-piece screen is 20 percent more effective than is the corresponding flat perforated plate alone, even if the holes in the flat plate are narrower. An accordion screen alone is similarly effective in catching contaminants, but lumps of agglomerated granules of the desired material often collect in the valleys and clog the screen. The addition of a flat screen above the accordion screen prevents clogging of the accordion screen. Flat wire screens have often been used to remove contaminants from granular materials, and are about as effective as are the corresponding perforated flat plates used alone.

Backes, Douglas↗

Effect of histidine on sorafenib-induced vascular damage: Analysis using novel medaka fish model

Highlights: • Sorafenib decreased blood flow in the vasculature by narrowing the vascular diameter. • Histidine maintained the blood flow by dilating the vascular diameter of the existing vessel. • Histidine was useful for managing the sorafenib related vascular damage. • No positive effect of histidine was seen on the tumor progression or on the novel regenerating vessels. • A fli::GFP transgenic medaka is useful for analyzing the vascular changes under the administration of these chemicals. Sorafenib (SFN) is an anti-angiogenic chemotherapeutic that prolongs survival of patients with hepatocellular carcinoma (HCC); its side effects, including vascular damages such as hand-foot syndrome (HFS), are a major cause of therapy discontinuation. We previously reported that maintenance of peripheral blood flow by intake of dried bonito broth (DBB) significantly prevented HFS and prolonged the administration period. The amino acids contained in DBB probably contribute to its effects, but the mechanism has not been clarified. We hypothesized that histidine, the largest component among the amino acids contained in DBB, has effects on SFN-induced vascular damage, and evaluated this possibility using a novel medaka fish model.

60 APPLIED LIFE SCIENCES↗

Effect of helium on irradiation creep behavior of B-doped F82H irradiated in HFIR

The diameter of pressurized tubes of F82H and B-doped F82H irradiated up to similar to 6 dpa have been measured by a non-contacting laser profilometer. The irradiation creep strains of F82H irradiated at 573 and 673K were almost linearly dependent on the effective stress level for stresses below 260 MPa and 170 MPa, respectively. The creep strain of (BN)-B-10-F82H was similar to that of F82H IEA at each effective stress level except 294 MPa at 573K irradiation. For 673K irradiation, the creep strain of some (BN)-B-10-F82H tubes was larger than that of F82H tubes. However, the generation of similar to 300 appm He did not cause a large difference in the irradiation creep behavior at 6 dpa.

Ando, M.↗

PurpleAir Sensors as Effective Indicators of PM Exposure in Urban Areas

Particulate matter that is 2.5 microns or less in diameter (PM 2.5 ) is a biproduct of combustion reactions used for energy production. Populations that are exposed to consistently high levels of aerosolized PM 2.5 face serious health risks. This project compared low-cost PM 2.5 sensors with federally recognized methods to look for a cost-effective way to expand the air quality monitor network. Within metropolitan areas that face inconsistent spatial distribution of PM 2.5 , there may not be the necessary network density to indicate neighborhood-levels of PM 2.5 . This project aimed to examine the sensitivity of low-cost PM 2.5 sensor measurements on a neighborhood scale (< 4 km diameter) in an urban area to prevent citizens from being exposed to unsafe levels of PM 2.5 without their knowledge. Using publicly available sensor data from Livermore, CA and Bakersfield, CA, it was determined, based on the revealed patterns, that the analyzed low-cost sensors were able to display representative PM 2.5 levels for neighborhoodscale areas exposed to pollution from PM 2.5 sources.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗

Effect of Blown Powder Directed Energy Deposition Angle On Overspray Contamination

Abstract Blown powder directed energy deposition (DED) hybrid machine tools are particularly beneficial when the net shape of a component is to be manufactured in an additive and machined interleaved fashion. This investigation seeks to analyze the effect of the additive head lean angle relative to the part on blown powder DED surface contamination due to overspray. These hybrid DED platforms are commonly installed on multi-axis machining systems where the lean of the deposition head relative to the component surface can be controlled by tilting the component. The blown powder DED process has a 10–50% lower catchment efficiency as compared to wire fed DED systems. This excess powder is still fed towards the deposition location where the particles are heated by the laser and rebound off the melt pool. Some of these heated particles impact the previously machined thin-wall surface. While the deposition process and tool path planning process has been evaluated, the effect of the overspray due to lean angle of the deposition head on the previously thin-wall machined surface is not yet fully understood. This investigation found that minimum lean angle coincides with minimal overspray effect with nearly no contamination. If a lean angle is required, the maximum lean angle possible should be implemented for the smallest effected overspray area on the machined surface which was found to decrease the affect zone by half compared to intermediate lean angles. A diameter divergence was also noticed as the deposition angle was increased. In this study, a thorough analysis of the surface and geometric effects when depositing thin-walled components at varying angles is completed. It has been shown that part quality can be significantly affected by lean angle and thus must be incorporated as an additional design consideration in the manufacturing process.

Heinrich, Lauren↗

Adiabatic shear localization in the CrMnFeCoNi high-entropy alloy

The mechanical behavior of the single phase (fcc) CrMnFeCoNi high-entropy alloy (HEA) is examined in the dynamic regime. Here a series of experiments by dynamic-loading hat-shaped specimens using stopper rings to control the displacement are performed, and the alloy resists adiabatic shear-band formation up to a very large imposed shear strain of ~7. It is proposed that the combination of the excellent strain-hardening ability and moderate thermal-softening effect retard shear localization. Recrystallized ultrafine-grained grains (diameters of 100–300 nm) with twins are revealed inside the shear band. Their formation is explained by the rotational dynamic recrystallization mechanism. The stability of the structure at high strain rates strongly suggests a high ballistic resistance for this class of alloys.

36 MATERIALS SCIENCE↗

Numerical study on spontaneous ignition of pressurized hydrogen release through a length of tube

The issue of spontaneous ignition of highly pressurized hydrogen release is of important safety concern, e.g. in the assessment of risk and design of safety measures. This paper reports on recent numerical investigation of this phenomenon through releases via a length of tube. This mimics a potential accidental scenario involving release through instrument line. The implicit large eddy simulation (ILES) approach was used with the 5th-order weighted essentially non-oscillatory (WENO) scheme. A mixture-averaged multi-component approach was used for accurate calculation of molecular transport. The thin flame was resolved with fine grid resolution and the autoignition and combustion chemistry were accounted for using a 21-step kinetic scheme. The numerical study revealed that the finite rupture process of the initial pressure boundary plays an important role in the spontaneous ignition. The rupture process induces significant turbulent mixing at the contact region via shock reflections and interactions. The predicted leading shock velocity inside the tube increases during the early stages of the release and then stabilizes at a nearly constant value which is higher than that predicted by one-dimensional analysis. The air behind the leading shock is shock-heated and mixes with the released hydrogen in the contact region. Ignition is firstly initiated inside the tube and then a partially premixed flame is developed. Significant amount of shock-heated air and well developed partially premixed flames are two major factors providing potential energy to overcome the strong under-expansion and flow divergence following spouting from the tube. Parametric studies were also conducted to investigate the effect of rupture time, release pressure, tube length and diameter on the likelihood of spontaneous ignition. It was found that a slower rupture time and a lower release pressure will lead to increases in ignition delay time and hence reduces the likelihood of spontaneous ignition. If the tube length is smaller than a certain value, even though ignition could take place inside the tube, the flame is unlikely to be sufficiently strong to overcome under-expansion and flow divergence after spouting from the tube and hence is likely to be quenched. (author)

08 HYDROGEN↗

Experimental study of lean flammability limits of methane/hydrogen/air mixtures in tubes of different diameters

Lean limit flames in methane/hydrogen/air mixtures propagating in tubes of internal diameters (ID) of 6.0, 8.9, 12.3, 18.4, 25.2, 35.0, and 50.2 mm have been experimentally studied. The flames propagated upward from the open bottom end of the tube to the closed upper end. The content of hydrogen in the fuel gas has been varied in the range 0-40 mol%. Lean flammability limits have been determined; flame shapes recorded and the visible speed of flame propagation measured. Most of the observed limit flames in tubes with diameters in the range of 8.9-18.4 mm had enclosed shape, and could be characterized as distorted or spherical flame balls. The tendency was observed for mixtures with higher hydrogen content to form smaller size, more uniform flame balls in a wider range of tube diameters. At hydrogen content of 20% or more in the fuel gas, limit flames in largest diameters (35.0 mm and 50.2 mm ID) tubes had small, compared to the tube diameter, size and were ''lens''-shaped. ''Regular'' open-front lean limit flames were observed only for the smallest diameters (6.0 mm and 8.9 mm) and largest diameters (35.0 and 50.2 mm ID), and only for methane/air and (90% CH{sub 4} + 10% H{sub 2})/air mixtures, except for 6 mm ID tube in which all limit flames had open front. In all experiments, except for the lean limit flames in methane/air and (90% CH{sub 4} + 10% H{sub 2})/air mixtures in the 8.9 mm ID tube, and all limit flames in 6.0 mm ID tube, visible flame speeds very weakly depended on the hydrogen content in the fuel gas and were close to- or below the theoretical estimate of the speed of a rising hot bubble. This observation suggests that the buoyancy is the major factor which determines the visible flame speed for studied limit flames, except that last mentioned. A decrease of the lean flammability limit value with decreasing the tube diameter was observed for methane/air and (90% CH{sub 4} + 10% H{sub 2})/air mixtures for tubes having internal diameters in the range of 18.4-50.2 mm. This effect has been attributed to the stronger combined effect of the preferential diffusion and flame stretch in narrower tubes for flames which resemble rising bubble. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multi-scale model based design of membrane reactor/separator processes for intensified hydrogen production through the water gas shift reaction

This paper aims to first quantify the impact of various diffusion models (Maxwell-Stefan, Wilke, Dusty-Gas) on the predictions of a multi-scale membrane reactor/separator mathematical model, and to then demonstrate this model's use for the design and process intensification of membrane reactor/separator systems for hydrogen production. This multi-scale model captures velocity, temperature and species' concentration profiles along the catalyst pellet's radial direction, and along the reactor's axial direction, by solving the momentum, energy, and species transport equations, accounting for convection, conduction, reaction, and diffusion mechanisms. In the first part of work, the effect of pellet-scale design parameters (mean pore diameter, volumetric porosity, tortuosity factor, etc.) and various species' flux models on the model predictions is studied. In the second part, the study focuses on the comparison, in terms of their process intensification characteristics, of various hydrogen production processes. These include a conventional high-temperature shift reactor (HTSR)/low-temperature shift reactor (LTSR) sequence, a novel HTSR/membrane separator (MS)/LTSR/MS sequence, and a process that involves low-temperature shift membrane reactors-LTSMR in a series.

08 HYDROGEN↗

Investigation of sol-gel feedstock additions and process variables on the density and microstructure of UN microspheres

The kernel of fully ceramic microencapsulated (FCM) fuel requires a material with high fissile density. For that reason, among others, UN is the appropriate chemical state for low enriched U fuel. The UN kernels are spheres ~800 μm in diameter made using a sol-gel process. The effect of additives on the chemistry and density of the UN microspheres are investigated in this work. Gadolinium nitrate hexahydrate, Gd 2 O 3 , B, SiO 2 and SiC were incorporated into the sol-gel broth in varying concentrations. It was found that Gd can serve as both a sintering aid and burnable poison when added to the sol-gel broth as a Gd(NO 3 ) 3 6H 2 O. However, even with the increased theoretical density of the UN microspheres, the U density was still too low for the FCM design that replaces UO 2 pellets in a commercial light water reactor. Silicon carbide and B were also successfully added but produced a lower density final product. Other sol-gel processing variables were investigated. In conclusion, the pour density of the sol-gel feedstock was found to influence the final converted UN kernel density.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Microstructure evolution and mechanical characterization of Nd:YAG laser beam welded titanium tubes

Highlights: • Joining of thin titanium tubes using laser beam welding. • Fusion zone exhibited coarse granular like grains with serrated and irregular boundaries. • Large spherical and irregular shape pores were observed at lower welding speeds. • Misorientation angle distribution indicated substructure boundaries along with single β grain formation from double α grains. • Fusion zone strengthened by substructure boundaries, solid solution strengthening and dislocation density. - Abstract: Grade 2 titanium tubes of outer diameter 60 mm and wall thickness 3.9 mm were effectively joined by Nd:YAG laser. The welding speed was varied in five levels (2.50, 2.75, 3.00, 3.25 and 3.50 m/min). The microstructure evolution was studied using optical microscopy and advanced characterization techniques. The bead geometry changed from parallel shape to wedge shape with increased welding speed due to changes in surface tension. The macrographs showed three zones namely fusion zone, heat affected zone (HAZ) and base metal. Coarse granular structure with irregular and serrated contours was observed in the fusion zone. Acicular α grains were observed at the extreme outer edge of the fusion zone due to rapid cooling. Spherical and irregular shaped pores were observed near the centerline of the fusion zone at lower welding speeds due to large amount of entrapped gases and downward sweeping solidification front. The grain size decreased with increased welding speed due to higher cooling rate. The misorientation angle distribution map showed three distinct regions. The increase in welding speed caused an increase in low angle boundaries and a reduction in very high angle boundaries. High density of dislocations was observed in the fusion zone due to thermal stresses caused by solidification. The microhardness of the fusion zone was recorded to be higher than base metal due to substructure boundaries, solute elements and dislocations. The increase in welding speed shifted the fracture location from fusion zone to base metal and fracture mode from brittle to ductile.

36 MATERIALS SCIENCE↗

Bubble departure and sliding in high-pressure flow boiling of water

Bubble growth, departure and sliding in low-pressure flow boiling has received considerable attention in the past. However, most applications of boiling heat transfer rely on high-pressure flow boiling, for which very little is known, as experimental data are scarce and very difficult to obtain. In this work, we conduct an experiment using high-resolution optical techniques. By combining backlit shadowgraphy and phase-detection imaging, we track bubble shape and physical footprint with high spatial ($6\,\mathrm {\mu }{\rm m}$) and temporal ($33\,\mathrm {\mu }{\rm s}$) resolutions, as well as bubble size and position as bubbles nucleate and slide on top of the heated surface. We show that at pressures above 1 MPa bubbles retain a spherical shape throughout the growth and sliding process. We analytically derive non-dimensional numbers to correlate bubble velocity and liquid velocity throughout the turbulent boundary layer and predict the sliding of bubbles on the surface, solely from physical properties and the bubble growth rate. We also show that these non-dimensional solutions can be leveraged to formulate elementary criteria that predict the effect of pressure and flow rate on bubble departure diameter and growth time.

Mechanics↗

Pillar[5]arene Based Conjugated Microporous Polymers for Propane/Methane Separation through Host–Guest Complexation

We present an efficient strategy for the preparation of conjugated microporous polymers incorporating pillar[5]arenes (P5-CMPs) with surface areas up to 400 m 2 g –1 via Pd-catalyzed Sonogashira–Hagihara cross-coupling reaction of triflate functionalized pillar[5]arene with 1,4-diethynylbenzene and 4,4'-diethynyl-1,1'-biphenyl linkers. In an effort to transfer intrinsic properties of pillar[5]arene, that is its ability to form strong host–guest complexes with linear hydrocarbons in solution, into the solid-state, we investigated the affinity of P5-CMPs toward propane gas. Unlike previously reported porous solids, which showed isosteric heats of adsorption ($Q$ st ) for propane in the range of 32.9–36.9 kJ mol–1 at zero coverage and increasing $Q$ st with rising loading due to intermolecular interactions between propane molecules, we observed very high $Q$ st values up to 53 kJ mol –1 at zero coverage, which gradually decreased to ~35 kJ mol –1 with increasing loadings. This observation indicates strong supramolecular host–guest complexation between propane and pillar[5]arene via multiple C–H/$π$ interactions, i.e., “macrocyclic effect” arising from the ideal size match of kinetic diameter of propane to the cavity of pillar[5]arene. This approach also allowed us to introduce thermodynamic selectivity for the separation of saturated hydrocarbons with low polarizability. High affinity of P5-CMPs for propane facilitated its efficient breakthrough separation from a simulated natural gas mixture (methane:propane, 9:1) at 298 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ambient ion focusing from a field-free region to a detector: enhanced signal for explosives and drug detection with mass spectrometry

This study demonstrates ion focusing at ambient pressure and increased ion signal by creating a voltage gradient from a field-free region to a detector, thereby improving the detection of chemicals, such as explosives and drugs. At ambient pressure, ion loss and resulting signal reduction pose challenges that limit detection sensitivity in analytical instruments. Techniques to increase sensitivity, such as atmospheric flow tube-mass spectrometry (AFT-MS), extend ion-molecule reaction times but result in significant overall ion loss due to diffusion. Ion manipulation techniques, though challenging at ambient pressure, can mitigate these losses by concentrating ions toward the detector inlet. Using SIMION, ion trajectories were modeled with a voltage gradient applied between a flow tube and a detector, revealing ion focusing at ambient pressure. Experimental verification with an atmospheric flow tube employed both mass spectrometry and Faraday plate detectors to measure ion beam profiles across varying flow rates, tube diameters, and voltage gradients. Application of a voltage gradient effectively directed ions to the axial center of the flow tube, narrowed ion beam width, and increased signal intensity by 5 to 10 times compared to conditions without a voltage gradient. This ion focusing approach shows promise for improving sensitivity in ambient-pressure instruments. This technique has the potential to enhance detection levels in security and forensic applications, with particular benefits for field-portable devices used at checkpoints to identify explosives and drugs.

ambient pressure↗