Search NASA⌕ Search

SEARCH · Search NASA

Results for “FERROMAGNETIC MATERIALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Large anomalous Hall effect in ferromagnetic insulator-topological insulator heterostructures

We demonstrate the van der Waals epitaxy of the topological insulator compound Bi{sub 2}Te{sub 3} on the ferromagnetic insulator Cr{sub 2}Ge{sub 2}Te{sub 6}. The layers are oriented with (001)Bi{sub 2}Te{sub 3}||(001)Cr{sub 2}Ge{sub 2}Te{sub 6} and (110)Bi{sub 2}Te{sub 3}||(100)Cr{sub 2}Ge{sub 2}Te{sub 6}. Cross-sectional transmission electron microscopy indicates the formation of a sharp interface. At low temperatures, bilayers consisting of Bi{sub 2}Te{sub 3} on Cr{sub 2}Ge{sub 2}Te{sub 6} exhibit a large anomalous Hall effect (AHE). Tilted field studies of the AHE indicate that the easy axis lies along the c-axis of the heterostructure, consistent with magnetization measurements in bulk Cr{sub 2}Ge{sub 2}Te{sub 6}. The 61 K Curie temperature of Cr{sub 2}Ge{sub 2}Te{sub 6} and the use of near-stoichiometric materials may lead to the development of spintronic devices based on the AHE.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Exploring Electric Polarization Mechanisms in Multiferroic Oxides

Multiferroic oxides are a class of systems which exhibit coupling between the electrical polarization and the magnetization. These materials show promise to lead to devices in which ferromagnetic memory can be written with magnetic fields or magnetic bits can be written by an electric field. The work conducted in our research focuses on single phase materials. We studied the detailed coupling of the spin and lattice correlations in these systems. In the first phase of the proposal, we explored the complex spin spiral systems and low temperature behavior of hexagonal layered REMnO 3 (RE= rare earth, Y and Sc) system following the detailed structural changes which occurred on crossing into the magnetic states. The techniques were applied to other layered materials such as superconductors and thermoelectric where the same layered motif exists. The second phase of the proposal focused on understanding the mechanisms involved in the onset high temperature ferroelectricity ion hexagonal REMnO 3 and at low temperature in E-Type magnetic ordered perovskite REMnO 3 . We wsynthesized preovskite small A site multiferroics by high pressure and high temperature methods. Detailed measurement of the structural properties and dynamics were conducted over a range of length scales from atomic to mesoscopic scale using, x-ray absorption spectroscopy, x-ray diffuse scattering, x-ray and neutron pair distribution analysis and high resolution x-ray diffraction. Changes in vibration modes which occur with the onset of polarization were probed with temperature and pressure dependent infrared absorption spectroscopy. In addition the orthorhombic system (small radius RE ions) which is believed to exhibit electronically driven ferroelectricity and is also not understood was examined. The multiple length scale synchrotron based measurements may assist in developing more detailed models of these materials and possibly lead to device applications. The experimental work was complemented by density functional methods to determine the magnetic ground states and ab initio molecular dynamics methods (AIMD) to determine the high temperature structures. Simulation were carried out on supercomputers at the National Energy Research Scientific Computing Center (NERSC). An important contribution of this work was the training of graduate students and postdoctoral researchers in materials synthesis, high pressure methods and synchrotron based spectroscopy and x-ray scattering techniques.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Strong spin-lattice coupling in CrSiTe{sub 3}

CrSiTe{sub 3} has attracted recent interest as a candidate single-layer ferromagnetic semiconductor, but relatively little is known about the bulk properties of this material. Here, we report single-crystal X-ray diffraction, magnetic properties, thermal conductivity, vibrational, and optical spectroscopies and compare our findings with complementary electronic structure and lattice dynamics principles calculations. The high temperature paramagnetic phase is characterized by strong spin-lattice interactions that give rise to glassy behavior, negative thermal expansion, and an optical response that reveals that CrSiTe{sub 3} is an indirect gap semiconductor with indirect and direct band gaps at 0.4 and 1.2 eV, respectively. Measurements of the phonons across the 33 K ferromagnetic transition provide additional evidence for strong coupling between the magnetic and lattice degrees of freedom. The Si-Te stretching and Te displacement modes are sensitive to the magnetic ordering transition, a finding that we discuss in terms of the superexchange mechanism. Spin-lattice coupling constants are also extracted.

36 MATERIALS SCIENCE↗

Determination of the Transition Temperature of a Weak Ferromagnetic Thin Film by Means of an Evolution of the Method Based on the Arrott Plots

The ferromagnetic transition temperature (T{sub c}) of a weak ferromagnetic thin film Cu{sub 0.38}Ni{sub 0.62} has been estimated by using an evolution of the Belov, Goriaga, and Arrott (BGA) model. In fact, the typically used measurements of the zero-field-cooled-field-cooled magnetic moment (m) as a function of temperature (T), the magnetic hysteresis loops (m(H)) as a function of field, and the temperature dependence of the remanent magnetic moment, performed on our sample, did not allow us to individuate precisely the value of T{sub c}, mainly due to the influence of thermal effects and noise on the weak ferromagnetic response of the sample, resulting in a large uncertainty in the estimation of T{sub c}. On the other hand, also the commonly used method of determining the T{sub c} by means of a linear extrapolation of the high-field region of m{sup 2} as a function of the normalized magnetic field (H/m) at different temperatures (Arrott curves), working though for our analyzed material, could not completely fulfill the basic assumptions of the BGA model in general. For these reasons, we have considered the analysis of the derivatives of the Arrott curves, starting from observing that the T{sub c} of the sample corresponds to the temperature where the curvature of the Arrott curves at low fields inverts. In this way, the sensitivity in the determination of the Curie point from the inductive measurements of the magnetic moment is improved while the correct assumptions of the Arrott model are also fully respected.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Field-free deterministic switching of all–van der Waals spin-orbit torque system above room temperature

Two-dimensional van der Waals (vdW) magnetic materials hold promise for the development of high-density, energy-efficient spintronic devices for memory and computation. Recent breakthroughs in material discoveries and spin-orbit torque control of vdW ferromagnets have opened a path for integration of vdW magnets in commercial spintronic devices. However, a solution for field-free electric control of perpendicular magnetic anisotropy (PMA) vdW magnets at room temperatures, essential for building compact and thermally stable spintronic devices, is still missing. Here, we report a solution for the field-free, deterministic, and nonvolatile switching of a PMA vdW ferromagnet, Fe 3 GaTe 2 , above room temperature (up to 320 K). We use the unconventional out-of-plane anti-damping torque from an adjacent WTe 2 layer to enable such switching with a low current density of 2.23 × 10 6 A cm –2 . This study exemplifies the efficacy of low-symmetry vdW materials for spin-orbit torque control of vdW ferromagnets and provides an all-vdW solution for the next generation of scalable and energy-efficient spintronic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Microscopic subsurface characterization of layered magnetic materials using magnetic resonance force microscopy

This project resulted in the following accomplishments: 1) The invention of scanned probe ferromagnetic resonance microscopy. Upon implementation and refinement this approach was used to measure static and dynamic magnetic resonance properties of ferromagnets with an unprecedented combination of spectral and spatial resolution. 2) Demonstration and study of spin pumping in a pristine ferromagnet across a boundary defined entirely by a magnetic field gradient, and so free of materials discontinuities. 3) First demonstrated highly efficient dynamic spin injection from Y 3 Fe 5 O 12 (YIG) into NiO, an antiferromagnetic (AF) insulator and robust spin propagation in AF NiO over distances up to 100-nm thickness; both spin injection and spin transport are mediated by the AF spin correlations. 4) Demonstration of exceptionally high efficiency conversion of spin current to charge current achieved in spin pumping from the dynamic magnetization of a ferromagnetic insulator into a variety of adjacent metal films. 5) Seminal study of the nature of spin-orbit coupling in d-electron metals that revealed the dominant sensitivity of the d-orbital moment to the d-electron count and revealing the important roles of both d-electron configuration and atomic number in the physics of the spin Hall effect. 6) Demonstration of observation of FMR by means of optically-detected NV diamond relaxometry that provided a highly sensitive, spatially resolved FMR detection method and revealed spin pumping across 100-nm length scales by means of dipolar coupling. 7) Using magnetic field localization, developed for FMR imaging, demonstrated a novel approach to discretizing spin wave modes to improve the characteristics of auto-oscillators driven by pure spin currents produced by the spin Hall effect. 8) We demonstrated large spin pumping signals from propagating high wavevector spinwaves in thin film YIG find that the spin pumping efficiency was insensitive to wavevector thus emphasizing the promise of thin YIG films for spinwave-based spintronics by allowing for predictable down-scaling of device dimensions and enabling a broad range of operational frequencies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mn-substituted cerium oxide nanostructures and their magnetic properties

Highlights: • Mn{sub x}Ce{sub 1-x}O{sub 2} (0.1 ≤ x ≤ 0.5) nanostructures were prepared by one step microwave refluxing method. • The saturation magnetization values for the samples rose with increased Mn content. • The oxygen vacancies inherently played crucial role in increasing the magnetization values. - Abstract: In this study, we report the magnetic properties of nanostructured Mn{sub x}Ce{sub 1-x}O{sub 2} (0 0.1 ≤ x ≤ 0.5) materials, synthesized via microwave refluxing technique. Phase purity of the samples was investigated using the structural characterization techniques such as X-ray diffraction (XRD) and transmission electron microscopy (TEM). These analyses indicated the substitution of Ce-ions with Mn-ions in the lattice. The progressive increase in the oxygen vacancies with increased dopant concentration was demonstrated by Raman, UV–vis and photoluminescence spectroscopic studies. X-ray photoelectron spectroscopy analysis further supported the presence of Mn{sup 2+}, Ce{sup 3+} and Ce{sup 4+} ions as well as oxygen vacancies in the samples. The Mn substituted CeO{sub 2} nanostructures were found to exhibit room temperature ferromagnetism (RTFM). There was a continuous improvement in the saturation magnetization (M{sub S}) values with increased Mn concentration. This might be due to the prevalence of surface oxygen vacancies and the systematic rise in their concentration with increased dopant content.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The Electronic Structures and Ferromagnetism of Cu-Doped ZnO: the First-Principle Calculation Study

We have carried out first-principle spin-polarized calculations to investigate the electronic structures and the magnetic properties of Cu-doped wurtzite ZnO. It was found that the Cu{sub Zn} substitution can introduce 1 μ{sub B} local magnetic moment into the doped system, whereas the ferromagnetic coupling between Cu{sub Zn}s is so weak that the system cannot keep ferromagnetism at higher temperature. In Zn vacancy (V{sub Zn}) and Cu{sub Zn} coexisted system, Cu is in the Cu {sup 2+}/Cu {sup 3+} mixed valence under the influence of acceptor defect V{sub Zn}. Cu-3d electrons couple with O(around V{sub Zn})-sp electrons and then form Cu{sup 2+} −V{sub Zn} −Cu{sup 2+} or Cu{sup 2+} −VZn−−Cu{sup 3+} bound magnetic polaron (BMP) in the range of 1.27 ∼ 1.90 nm. The overlapping between BMPs is the main ferromagnetism origin of ZnO/Cu. According to our analysis, we thought that ZnO/Cu system will display stronger ferromagnetism when the Cu concentration attains 3% in atomic percentage. The calculated results and analysis will shed light on the origin of ferromagnetism in ZnO/Cu.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Emergent Spin Dynamics Enabled by Lattice Interactions in a Bicomponent Artificial Spin Ice

Artificial spin ice (ASI) are arrays of nanoscaled magnets that can serve both as models for frustration in atomic spin ice as well as for exploring new spin-wave-based strategies to transmit, process, and store information. Here, we exploit the intricate interplay of the magnetization dynamics of two dissimilar ferromagnetic metals arranged on complimentary lattice sites in a square ASI to modulate the spin-wave properties effectively. We show that the interaction between the two sublattices results in unique spectra attributed to each sublattice, and we observe inter- and intra-lattice dynamics facilitated by the distinct magnetization properties of the two materials. The dynamic properties are systematically studied by angular-dependent broadband ferromagnetic resonance and confirmed by micromagnetic simulations. Here, we show that combining materials with dissimilar magnetic properties enables the realization of a wide range of two-dimensional structures, potentially opening the door to new concepts in nanomagnonics.

36 MATERIALS SCIENCE↗

Analytical theory and possible detection of the ac quantum spin Hall effect

Here, we develop an analytical theory of the low-frequency ac quantum spin Hall (QSH) effect based upon the scattering matrix formalism. It is shown that the ac QSH effect can be interpreted as a bulk quantum pumping effect. When the electron spin is conserved, the integer-quantized ac spin Hall conductivity can be linked to the winding numbers of the reflection matrices in the electrodes, which also equal to the bulk spin Chern numbers of the QSH material. Furthermore, a possible experimental scheme by using ferromagnetic metals as electrodes is proposed to detect the topological ac spin current by electrical means.

36 MATERIALS SCIENCE↗

Polaronic Conductivity in Cr 2 Ge 2 Te 6 Single Crystals

We report that intrinsic 2D ferromagnetic semiconductors are an important class of materials for spin-charge conversion applications. Cr 2 Ge 2 Te 6 retains long-range magnetic order in the bilayer at cryogenic temperatures and shows complex magnetic interactions with considerable magnetic anisotropy. Here, a series of structural, magnetic, X-ray scattering, electronic, thermal transport and first-principles calculation studies are performed, which reveal that localized electronic charge carriers in Cr 2 Ge 2 Te 6 are dressed by the surrounding lattice and are involved in polaronic transport via hopping that is observed via magnetocrystalline anisotropy. This opens the possibility for manipulation of charge transport in Cr 2 Ge 2 Te 6 —based devices by electron–phonon- and spin–orbit coupling-based tailoring of polaron properties.

2D materials↗

Magnetic Relaxation Experiments in CNT-Based Magnetic Nanocomposite

In this work, we discuss the relaxation of the magnetic moments in a novel carbon nanotube (CNT)-based nanocomposite synthesized by using chemical vapor deposition process. The material consists of a matrix of CNT filled by Fe-based nanoparticles. This structure is seen clearly by scanning and transmission. X-ray diffraction and Raman spectroscopy are used to detect the predominant Fe{sub 3}C phase and the CNT presence in the sample, respectively. The results obtained from both hysteresis cycles, M(H), and zero field cooled-field cooled (ZFC-FC) measurements confirm that the material is characterized by both a strong ferromagnetic exchange and random magnetic anisotropy. For the first time, we have been able to fit the magnetic relaxation data, M(t), by using both the two distributions of nanoparticles data deduced from the ZFC-FC data and the temperature dependence of the magnetic anisotropy obtained from the law of approach to saturation in random magnets. .

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Resonance from antiferromagnetic spin fluctuations for superconductivity in UTe 2

We report superconductivity originates from the formation of bound (Cooper) pairs of electrons that can move through the lattice without resistance below the superconducting transition temperature $T_c$. Electron Cooper pairs in most superconductors form anti-parallel spin singlets with total spin S = 0, although they can also form parallel spin-triplet Cooper pairs with S = 1 and an odd parity wavefunction. Spin-triplet pairing is important because it can host topological states and Majorana fermions relevant for quantum computation. Because spin-triplet pairing is usually mediated by ferromagnetic (FM) spin fluctuations3, uranium-based materials near an FM instability are considered to be ideal candidates for realizing spin-triplet superconductivity. Indeed, UTe 2 , which has a $T_c$ ≈ 1.6 K, has been identified as a candidate for a chiral spin-triplet topological superconductor near an FM instability, although it also has antiferromagnetic (AF) spin fluctuations. Here we use inelastic neutron scattering (INS) to show that superconductivity in UTe 2 is coupled to a sharp magnetic excitation, termed resonance, at the Brillouin zone boundary near AF order. Because the resonance has only been found in spin-singlet unconventional superconductors near an AF instability, its observation in UTe 2 suggests that AF spin fluctuations may also induce spin-triplet pairing or that electron pairing in UTe 2 has a spin-singlet component.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Disorder-induced Room Temperature Ferromagnetism in Glassy Chromites

We report an unusual robust ferromagnetic order above room temperature upon amorphization of perovskite [YCrO3] in pulsed laser deposited thin films. This is contrary to the usual expected formation of a spin glass magnetic state in the resulting disordered structure. To understand the underlying physics of this phenomenon, we combine advanced spectroscopic techniques and first-principles calculations. We find that the observed order-disorder transformation is accompanied by an insulator-metal transition arising from a wide distribution of Cr-O-Cr bond angles and the consequent metallization through free carriers. Similar results also found in YbCrO3-films suggest that the observed phenomenon is more general and should, in principle, apply to a wider range of oxide systems. The ability to tailor ferromagnetic order above room temperature in oxide materials opens up many possibilities for novel technological applications of this counter intuitive effect.

36 MATERIALS SCIENCE↗

Local lattice distortions and magnetic properties of CdCr{sub 2}Se{sub 4−x}S{sub x}

Interplay between structural disorder and magnetic interaction is investigated here for a multiferroic candidate material, CdCr{sub 2}Se{sub 4}. Ferromagnetic order in CdCr{sub 2}Se{sub 4} sets in below T{sub C} ∼ 130 K as a result of competition between the direct Cr-Cr spin coupling and the near neighbour Cr-Se-Cr exchange interactions. Hence, a small change in the crystal structure is expected to drastically affect its magnetic order. In this report, local lattice distortions within the overall cubic symmetry were brought about by replacing a small percentage of Se by isovalent S. Detailed crystal structure study using EXAFS and Raman Spectroscopy reflects the presence of local distortions within the overall cubic symmetry. Contrary to the expectation, magnetic properties of the substituted compositions do not show any drastic changes. Though, a signature of spin-phonon coupling is present across the magnetic ordering temperature. No structural phase transition occurs within the investigated temperature range of 80–300 K.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magnetic Correlations in the Quasi-Two-Dimensional Semiconducting Ferromagnet CrSiTe 3

Intrinsic, 2D ferromagnetic semiconductors are an important class of materials for overcoming dilute magnetic semiconductors’ limitations for spintronics. CrSiTe 3 is a particularly interesting material of this class, since it can likely be exfoliated to single layers, for which T c is predicted to increase dramatically. Establishing the nature of the bulk material’s magnetism is necessary for understanding the thin-film magnetic behavior and the material’s possible applications. In this work, we use elastic and inelastic neutron scattering to measure the magnetic properties of single crystalline CrSiTe 3 . We find a very small single ion anisotropy that favors magnetic ordering along the c-axis and that the measured spin waves fit well to a model in which the moments are only weakly coupled along that direction. Then, we find that both static and dynamic correlations persist within the ab-plane up to at least 300 K, which is strong evidence of the material's 2D characteristics that are relevant for future studies on thin film and monolayer samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Preparation, ferromagnetic and photocatalytic performance of NiO and hollow Co{sub 3}O{sub 4} fibers through centrifugal-spinning technique

Highlights: • NiO and hollow Co{sub 3}O{sub 4} fibers with the diameter of about 10 μm were prepared through centrifugal-spinning technique. • The evolution mechanism from precursor to crystalline fibers was explored. • Both NiO and hollow Co{sub 3}O{sub 4} fibers show ferromagnetism. • The NiO fibers exhibit good photocatalytic performance. - Abstract: Both NiO and hollow Co{sub 3}O{sub 4} fibers with the diameter of about 10 μm have been successfully prepared through spinning high viscous sols into precursor fibers and followed calcination process. The evolution process from precursor to crystalline fibers and the microstructures of the obtained fibers were characterized by TG-DSC, FT-IR, XRD, HRTEM, SEM and the like. The method is facile and cost-effective for mass production of fibers and the obtained fibers are pure phase with high crystallinity. Their magnetic properties were investigated, showing that both the fibers are ferromagnetic. Meanwhile, the NiO fibers exhibit good photocatalytic performance for the removal of Congo red from water under UV light irradiation.

36 MATERIALS SCIENCE↗