Search NASA⌕ Search

SEARCH · Search NASA

Results for “GUI”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

100 Gbps Radiation Tolerant Optical Transceiver (Final Technical Report)

The overall technical objective in phase I for the Surface Emitting Laser-Electro-Absorption Modulator (EAM) was to demonstrate feasibility of this approach by designing and building the laser-EAM chips, optimizing the fabrication process for the Laser/EAM in a series of 3 fabrication runs, irradiating Laser/EAM chips from each run and DC testing of the chips post radiation. 100 Gbps/channel testing would be done at the end of the phase II program before and after radiation. The overall technical objective for the driver circuit was to demonstrate the radiation tolerance of a circuit using the same technology as the driver, and to design the appropriate driver circuit.

43 PARTICLE ACCELERATORS↗
DOE OSTI2019

The ETROC Project: Precision Timing ASIC Development for LGAD-based CMS Endcap Timing Layer (ETL) Upgrade

The ETROC (Endcap Timing Readout Chip) is being developed for the LGAD-based CMS Endcap Timing Layer (ETL) at HL-LHC. The ETL on each side of the interaction region will be instrumented with a two-disk system of MIP-sensitive LGAD silicon devices to be read out by ETROCs for precision timing measurement with down to 30 ps timing resolution. The ETROC is designed to handle a 16 x 16 pixel cell matrix, with each pixel cell being 1.3 mm x 1.3 mm to match the LGAD sensor pixel size. Approximately 15% of the sensors near the highest eta region will experience hadron fluence above 1e15 neq/cm² towards end of operation of HL-LHC, resulting in small signal amplitude with LGAD gain reduced to around 10. For this reason, the front-end design for preamplifier and discriminator has been specifically optimized for the reduced LGAD signals, with enough flexibilities to meet the ETL specific needs for time resolution, power budget and radiation profile.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Electrification Annual Progress Report (FY2019)

During fiscal year 2019 (FY 2019), the U.S. Department of Energy (DOE) Vehicle Technologies Office (VTO) funded early stage research & development (R&D) projects that address Batteries and Electrification of the U.S. transportation sector. The VTO Electrification Sub-Program is composed of Electric Drive Technologies, and Grid Integration activities. The Electric Drive Technologies group conducts R&D projects that advance electric motors and power electronics technologies. The Grid and Charging Infrastructure group conducts R&D projects that advance grid modernization and electric vehicle charging technologies. This document presents a brief overview of the Electrification Sub-Program and progress reports for its R&D projects. Each of the progress reports provide a project overview and highlights of the technical results that were accomplished in FY 2019.

25 ENERGY STORAGE↗
DOE OSTI2022

Towards durable resistance to Septoria stem canker and leaf spot: A molecular understanding of resistance (Final Technical Report)

To identify, validate, and functionally characterize alleles that confer resistance to Septoria canker and leaf spot in Populus. The proposed research will elucidate a major mechanism of resistance to Sphaerulina musiva, the major limiting factor to plantations in eastern North America. Genome-wide association mapping, CRISPR/Cas9, and protein-protein assays will be used, enabling marker-aided breeding, reducing costs, and accelerating development of resistant varieties.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

EMPIRE-3.2 Nuclear reaction code system [Slides]

The presentation discusses the scope of EMPIRE, EMPIRE's convenience, the EMPIRE-3.2 (Malta) Nuclear Reaction Model Code, reaction models, and what is needed to improve EMPIRE's predictive power.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Frequent Fulcrum Functions: The Basics of SCALE’s Graphical User Interface [Slides]

This tutorial introduces the Fulcrum graphical user interface and the basic functions that enhance the common activities of creating, editing, navigating, executing, and visualizing SCALE input files. This tutorial will help you become familiar with the Fulcrum input file text editor and the integrated input development environment features of autocompletion, automatic checking, cursor context, and input navigation. In addition, the Fulcrum and SCALE runtime environment will be reviewed to improve the understanding of job execution workflow. This tutorial does not cover data and geometry plotting. Please see the Advanced User Interface Capabilities tutorial for details regarding plotting data and geometry. No prior experience with SCALE is required. You can follow along using SCALE 6.2 or 6.3-beta.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Advanced User Interface Capabilities [Slides]

This tutorial will review the data plotting and geometry visualization capabilities in the Fulcrum user interface. This tutorial will help you become familiar with Fulcrum’s 2D plot, and 2D and 3D geometry visualization features. You will learn how to identify plottable data items, compose and export plot and plot data for SCALE plot formats (SDF, Ampx MG/CE, PLT, F71, PTP, SPF, ORIGEN Gamma data, etc.) and visualize, navigate, cut, hide, and export the geometry and spatial data (fission-, dose-map, etc.) overlays in 2D and 3D. No prior experience with SCALE is required. Attendees can follow along using 6.3.0-beta.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Biofuel Viability for the Ocean-Going Marine Sector

Marine transport contributes significantly to global carbon dioxide emissions but is one of the most difficult sectors to decarbonize because full electrification is infeasible. Renewable, low–carbon biofuels offer a potential path to decarbonization of the marine sectors but the understanding of the effects of new biofuels on engine performance and emissions is limited. In this document we report on the results of a series of studies on the techno-economic, life cycle and technical feasibility of biofuels as replacements for heavy fuel oils currently used to fuel large ocean-going vessels.

09 BIOMASS FUELS↗
DOE OSTI2024

Advanced Measurements for Resilient Integration of Inverter-Based Resources: PROGRESS MATRIX Final Report

As nearly every aspect of the electric power grid undergoes rapid change, measurement technologies that support grid operation and planning must evolve as well. The rapid large-scale deployment of inverter-based resources (IBRs) vital to achieving the nation’s clean energy goals has in some cases led to negative impacts on the reliability and security of the bulk power system (BPS). Advanced power system measurements, including synchronized phasor and waveform measurements, are key to making IBR integration secure and reliable. To this end, the Department of Energy (DOE) initiated the PROGRESS MATRIX project to develop advanced measurement capabilities and analytics that will accelerate adoption of IBRs while improving the reliability and resilience of the BPS. This report discusses the outcomes of the project, which was a joint effort between the Pacific Northwest National Laboratory (PNNL), Oak Ridge National Laboratory (ORNL), the National Renewable Energy Laboratory (NREL), and Lawrence Berkeley National Laboratory (LBNL). In the project’s first year, PNNL, NREL, and ORNL partnered with the Bonneville Power Administration (BPA), the Western Area Power Administration (WAPA), and Kauai Island Utility Cooperative (KIUC) to understand their existing measurement capabilities and the gaps limiting deployment of IBR-focused measurement systems and analytics. The other primary activity in the first year was deployment of GridSweep instruments, which provide unprecedented precision in waveform measurement while probing distribution systems. The instruments were deployed at Dominion Energy and the University of California, Riverside. In the project’s second year, the input from partner utilities and collected measurements were used to advance measurement capabilities. Twelve analytical methods spanning disturbance analysis, power plant evaluation, feeder evaluation, and modeling were developed. Two software tools were developed, one to analyze GridSweep measurements and another to automatically evaluate the control performance of power plants connected to the BPS. Testbeds at ORNL and NREL were augmented to better enable studies of IBR integration. The project culminated in demonstrations of these analytical methods, software tools, and testbeds, both in the field and in the laboratory. This report discusses these various accomplishments and documents the significant progress in developing advanced measurement capabilities to support the secure, reliable, and accelerated adoption of IBRs in the BPS.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2024

Misalignment Tolerant Three-phase Wireless Fast Charging System for Electric Vehicles

This project proposes improving the technology level of the three-phase wireless charging technology developed at Oak Ridge National Laboratory (ORNL). Successful commercialization of wireless charging systems require that they meet strict safety standards for electromagnetic field emissions and interoperability with other wireless charging technology. ORNL has previously demonstrated a 50kW three-phase wireless power transfer system with 95% efficiency. This prototype system weighed less than 50% of similar high-power wireless charging system while simultaneously exhibiting better safety characteristics. Due to better material utilization, the reduction in mass is expected to translate into similar cost reduction for the magnetic coupler. Additionally, the smaller footprint of the system can ease vehicle integration difficulties that would be encountered using other technology. Furthermore, the three-phase design can be made to operate with existing single-phase coupler design more easily and without intentional physical misalignment which would otherwise pose safety issues.This project developed ORNL’s WPT technology to satisfy the specifications and requirements for electric vehicle (EV) charging. The result of the project will be a prototype and reference design for a high-power wireless charging system—including magnetics, power electronics, and controls—serving as a baseline for product development.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2025

Performance and automatic calibration scheme of the waveform sampler in the ETROC2 ASIC chip

The waveform sampler in the CMS ETROC2 chip for LGAD gain aging monitoring is a 2.56-GS/s 12-bit 8x-Interleaved ADC that consists of a coarse SAR stage, and a fine stage. This architecture delivers high performance on a relatively modest 65 nm process, while requires finding up to 24 calibration constants through calibration. We developed an automatic calibration method using charge injection test data. After calibration, the baseline random error is reduced by a factor of 2.5–3 compared to the default calibration, and a 5% charge measurement precision is achieved in 15 fC charge injection tests.

Fu, Tao [Unlisted, US]↗
DOE OSTI2024

Misalignment Tolerant Three-phase Wireless Fast Charging System for Electric Vehicles

This project proposes improving the technology level of the three-phase wireless charging technology developed at Oak Ridge National Laboratory (ORNL). Successful commercialization of wireless charging systems require that they meet strict safety standards for electromagnetic field emissions and interoperability with other wireless charging technology. ORNL has previously demonstrated a 50kW three-phase wireless power transfer system with 95% efficiency. This prototype system weighed less than 50% of similar high-power wireless charging system while simultaneously exhibiting better safety characteristics. Due to better material utilization, the reduction in mass is expected to translate into similar cost reduction for the magnetic coupler. Additionally, the smaller footprint of the system can ease vehicle integration difficulties that would be encountered using other technology. Furthermore, the three-phase design can be made to operate with existing single-phase coupler design more easily and without intentional physical misalignment which would otherwise pose safety issues. This project developed ORNL’s WPT technology to satisfy the specifications and requirements for electric vehicle (EV) charging. The result of the project will be a prototype and reference design for a high-power wireless charging system—including magnetics, power electronics, and controls—serving as a baseline for product development.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2025

Combining genome-wide association studies and expression quantitative trait nucleotide mapping with molecular and genetic validations to identify transcriptional networks regulating drought tolerance in Populus

Objectives: (i). To deploy a large-scale experimental drought trial for up to 1000 unique genotypes of Populus equipping the sites with controlled irrigation and drought treatments that are fully automated and monitored. FULLY COMPLETED (ii) To test the hypothesis that a suite of traits identified for drought tolerance in P. nigra can be measured in drought and control treatments in the wide germplasm collection of P. trichocarpa. FULLY COMPLETED (iii) To use established and novel GWAS model approaches to identify gene loci linked to drought tolerance traits on interest in P. trichocarpa. FULLY COMPLETED (iv) To undertake comparative analysis of GWAS results for drought tolerance traits in P. nigra and P. trichocarpa. PARTIALLY COMPLETED – remains active (v) Using RNAseq in P. trichocarpa, in droughted and control treatments to identify cis- and trans-regulated eQTN. FULLY COMPLETED (vi) Validate up to 50 cis-QTNs, from network hubs using transient protoplast assays. FULLY COMPLETED (vii) To establish Agrobacterium-based gene editing protocols in Populus. FULLY COMPLETED (viii) To utilize early leads from previous research to investigate at least 6 candidate genes for drought tolerance in Populus. FULLY COMPLETED (ix) To validate up to 20 candidate genes for drought tolerance in P. trichocarpa refined from the long-list tested in the transient assays for cis-acting hub gene targets. PARTIALLY COMPLETED- remains active.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

MethodOpt: a Shiny-based graphical user interface for multivariate optimization of sampling and analytical instrumentation

Method optimization is an important step in producing useful data in various experimental settings involving the use of sampling and analytical instrumentation, such as gas-chromatography mass-spectrometry or other analytical techniques. However, traditional optimization techniques often lack the sophistication of more modern optimization techniques developed in areas of applied mathematics. A graphical user interface has been developed that implements a multivariate, multi-objective optimization technique for spectra-generating sampling and analytical instrumentation, which saves substantial time and resources compared to the more traditional approaches to method development.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2026

2025 InterPACK: Thermal Management and Reliability Aspects

The presentation will provide an overview of automotive power electronics and electric machines thermal management systems that are typical for light-duty vehicles. Unique thermal and environmental aspects related to medium and heavy-duty vehicle applications will then be discussed. Finally, advanced thermal management and packaging technologies that could be evaluated and used in this project will be described.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2026

Massachusetts and New England Sustainable Aviation Fuel Study

The Massachusetts Port Authority established a project to assess feedstock availability to produce SAF near 10 New England airports. A techno-economic analysis was conducted to determine renewable fuels and SAF that could be produced from these feedstocks. The resource assessment found municipal solid waste, woody biomass, and food waste were most abundant. The techno-economic analysis found that potential fuel production varied widely based on location, feedstock, and technology production pathway ranging from 1 to 369 million gallons of gasoline equivalent per year. An assessment of infrastructure readiness to handle SAF was conducted. It was determined that SAF produced outside of New England should be blended in other regions with more capacity and flexibility and delivered to New England as Jet A is today. For SAF produced in New England, there are terminals that have existing infrastructure to receive, blend, and distribute SAF/Jet A blends.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗