Search NASA⌕ Search

SEARCH · Search NASA

Results for “Homogeneous flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Kinetic-theory predictions of clustering instabilities in granular flows: beyond the small-Knudsen-number regime

In this work we quantitatively assess, via instabilities, a Navier–Stokes-order (small- Knudsen-number) continuum model based on the kinetic theory analogy and applied to inelastic spheres in a homogeneous cooling system. Dissipative collisions are known to give rise to instabilities, namely velocity vortices and particle clusters, for sufficiently large domains. We compare predictions for the critical length scales required for particle clustering obtained from transient simulations using the continuum model with molecular dynamics (MD) simulations. The agreement between continuum simulations and MD simulations is excellent, particularly given the presence of well-developed velocity vortices at the onset of clustering. More specifically, spatial mapping of the local velocity-field Knudsen numbers (Knu) at the time of cluster detection reveals Knu » 1 due to the presence of large velocity gradients associated with vortices. Although kinetic-theory-based continuum models are based on a small- Kn (i.e. small-gradient) assumption, our findings suggest that, similar to molecular gases, Navier–Stokes-order (small-Kn) theories are surprisingly accurate outside their expected range of validity.

42 ENGINEERING↗

Binary black hole mergers in gaseous environments: 'Binary Bondi' and 'binary Bondi-Hoyle-Lyttleton' accretion

Merging supermassive black hole-black hole binaries produced in galaxy mergers are promising sources of detectable gravitational waves. If such a merger takes place in a gaseous environment, there is a possibility of a simultaneous detection of electromagnetic and gravitational radiation, as the stirring, shock heating, and accretion of the gas may produce variability and enhancements in the electromagnetic flux. Such a simultaneous detection can provide a wealth of opportunities to study gravitational physics, accretion physics, and cosmology. We investigate this scenario by performing fully general-relativistic, hydrodynamic simulations of merging, equal-mass, nonspinning black hole-black hole binaries embedded in gas clouds. We evolve the metric using the Baumgarte-Shapiro-Shibata-Nakamura formulation with standard moving puncture gauge conditions and handle the hydrodynamics via a high-resolution shock-capturing scheme. We consider both 'binary Bondi accretion' in which the binary is at rest relative to the ambient gas cloud, as well as 'binary Bondi-Hoyle-Lyttleton accretion' in which the binary moves relative to the gas cloud. The gas cloud is assumed to be homogeneous far from the binary and governed by a {Gamma}-law equation of state. We vary {Gamma} between 4/3 and 5/3. For each simulation, we compute the gas flow and accretion rate and estimate the electromagnetic luminosity due to bremsstrahlung and synchrotron emission. We find evidence for significant enhancements in both the accretion rate and luminosity over values for a single black hole of the same mass as the binary. We estimate that this luminosity enhancement should be detectable by the Large Synoptic Survey Telescope for a 10{sup 6}M{sub {center_dot}}binary in a hot gas cloud of density n{approx}10 cm{sup -3} and temperature T{approx}10{sup 6} K at z=1, reaching a maximum of L{approx}3x10{sup 43} erg s{sup -1}, with the emission peaking in the visible band, and lasting for {approx}1 hour.

79 ASTRONOMY AND ASTROPHYSICS↗

Desiccation of unsaturated porous media: Intermediate-scale experiments and numerical simulation

Soil desiccation (drying) is recognized as a potentially robust vadose zone remediation process involving water evaporation induced by air injection and extraction. Desiccation has the potential to immobilize contaminants and could potentially improve access for other gas-phase treatments by reducing water saturation and therefore increasing sediment gas-phase permeability. Before this technology could be deployed in the field, concerns related to energy limitations, osmotic effects, and potential contaminant remobilization after rewetting need to be addressed. A series of detailed wedge-shaped, intermediate-scale laboratory experiments in unsaturated homogeneous and simple heterogeneous systems was conducted to improve the understanding of the impact of energy balance issues on soil desiccation. The experiments were simulated with the multifluid flow simulator STOMP, using independently obtained hydraulic and thermal porous medium properties. In all the experiments, the injection of dry air proved to be an effective means for removing essentially all moisture from the test media. Evaporative cooling was observed which generally decreased with increased distance from the gas inlet chamber. Observations of temperature in fine-grained sands in the heterogeneous systems show two local temperature minima associated with the cooling. The first one occurs because of evaporation in the adjacent medium-grained sand whereas the second minimum is attributed to evaporative cooling in the fine-grained sand itself. Results of the laboratory tests were simulated accurately when thermal properties of the flow cell walls and insulation material were taken into account, indicating that the proper physics were incorporated into the simulator.

54 ENVIRONMENTAL SCIENCES↗

Oxygen isotope evidence for input of magmatic fluids and precipitation of Au-Ag-tellurides in an otherwise ordinary adularia-sericite epithermal system in NE China

Abstract Tellurium-rich (Te) adularia-sericite epithermal Au-Ag deposits are an important current and future source of precious and critical metals. However, the source and evolution of ore-forming fluids in these deposits are masked by traditional bulk analysis of quartz oxygen isotope ratios that homogenize fine-scale textures and growth zones. To advance understanding of the source of Te and precious metals, herein, we use petrographic and cathodoluminescence (CL) images of such textures and growth zones to guide high spatial resolution secondary ion mass spectroscopy (SIMS) oxygen isotope analyses (10 µm spot) and spatially correlated fluid inclusion microthermometric measurements on successive quartz bands in contemporary Te-rich and Te-poor adularia-sericite (-quartz) epithermal Au-Ag vein deposits in northeastern China. The results show that large positive oxygen isotope shifts from –7.1 to +7.7‰ in quartz rims are followed by precipitation of Au-Ag telluride minerals in the Te-rich deposit, whereas small oxygen isotope shifts of only 4‰ (–2.2 to +1.6‰) were detected in quartz associated with Au-Ag minerals in the Te-poor deposits. Moreover, fluid-inclusion homogenization temperatures are higher in comb quartz rims (avg. 266.4 to 277.5 °C) followed by Au-Ag telluride minerals than in previous stages (~250 °C) in the Te-rich deposit. The Te-poor deposit has a consistent temperature (~245 °C) in quartz that pre- and postdates Au-Ag minerals. Together, the coupled increase in oxygen isotope ratios and homogenization temperatures followed by precipitation of Au-Ag tellurides strongly supports that inputs of magmatic fluid containing Au, Ag, and Te into barren meteoric water-dominated flow systems are critical to the formation of Te-rich adularia-sericite epithermal Au-Ag deposits. In contrast, Te-poor adularia-sericite epithermal Au-Ag deposits show little or no oxygen isotope or fluid-inclusion evidence for inputs of magmatic fluid.

Geochemistry & Geophysics↗

Revisiting Kelvin Helmholtz Instabilities and von Kármán Vortices in Canopy Turbulence

Studying turbulence in vegetation canopies is vital in the context of a number of micrometeorological and hydrological applications. While recent focus has shifted more towards exploring different kinds of canopy heterogeneities, there are still gaps in the existing knowledge on the multiple types of dynamics involved in the case of horizontally homogeneous canopies. For example, experimental studies have indicated that turbulence in the canopy sublayer (CSL) can be divided into three regimes. In the deep-zone, the flow-field is dominated by von Kármán vortex streets and interrupted by strong sweep events. The second zone near the canopy top is dominated by attached eddies and Kelvin-Helmholtz waves associated with the velocity inflection point in the mean longitudinal velocity profile. Above the canopy, the flow resembles classical boundary layer flow. In this study, these different kinds of dynamics are studied together by means of a large eddy simulation (LES). The main theme of this work is to address the question whether the parametrization of the canopy by a distributed drag force in numerical simulations instead of placing real solid obstacles is consistent with the three layer conceptual model. Unique techniques such as measures from information theory and coupled oscillator analysis are used to extract the coherent structures associated with the two motions. It can be said that a better understanding of the rich dynamics associated with the simplest case of canopy turbulence can lead to more efficient simulations and more importantly improve the interpretation of more complex scenarios.

canopy turbulence↗

Spectral line shapes in spherically symmetric radially moving clouds

We present a method for the analysis of spectral line shapes arising in homogeneous, moving gas clouds in which velocity and molecular line excitation have power-law dependences on radial distance from the center. Analytical expressions are obtained for radial flows, for both optically thick and optically thin lines. The additional case of an optically thick line from a differentially rotating cloud is considered qualitatively. The method is applied to the interpretation of the C(12)O line observed in the direction of the Kleinmann-Low infrared nebula in Orion. While gravitational collapse and accelerated outflows would produce lines qualitatively similar to the observed profile, it does not appear to be possible to fit either model to the observations in detail.

Kuiper, T. B. H.↗

In situ measurements of light extinction of stratospheric aerosols

The extinction coefficient of ambient aerosol particles was measured using a multiple transverse cell (White Cell) with an effective path length of 100 m. Measurements were performed at seven fixed wavelengths in the visible region using a white light source and an interference filter set with 2 nm bandwidth and center wavelengths of 405.5, 450, 500, 550, 600, 650, and 692.5 nm. The total air flow in the system was 16.7 1/min; the volume of the chamber is close to 10 liters. It takes about one minute to fill the chamber with particles homogeneously, but it needs up to five minutes to get the chamber particle-free. Before measuring the aerosol, the transmission of the particle-free air is determined; then the aerosol passes through the chamber for a period of ten minutes; after this the transmission of particle-free ambient air is measured again for eight minutes. All times are subject to change. At present the measurements are done with a frequency of 1 Hz, but an increase of up to 30 Hz is possible. The lower detection limit of the used White Cell is 3.4 by 10(exp -06) per m. This is sufficient for measuring the extinction coefficient during most tropospheric and some stratospheric conditions. It will be necessary to increase the sensitivity by a factor of ten when measurements under the clearest stratospheric conditions take place.

Metzig, Gunthard↗

Direct simulation of particle dispersion in a decaying isotropic turbulence

Results of a numerical investigation of the dispersion of solid particles in decaying isotropic turbulence are presented. The 3D time-dependent velocity field of a homogeneous nonstationary turbulence is computed using the method of direct numerical simulation (DNS). The dispersion characteristics of three different solid particles (corn, copper, and glass) injected in the flow are obtained by integrating the complete equation of particle motion along the instantaneous trajectories of 22-cubed particles for each particle type, and then by performing ensemble averaging. Good agreement was achieved between the present DNS results and the measured time development of the mean-square displacement of the particles. Questions of how and why the dispersion statistics of a solid particle differ from those of its corresponding fluid point and surrounding fluid and what influences inertia and gravity have on these statistics are also discussed.

Elghobashi, S.↗

Additional Complexities in Nakhlite Pyroxenes: A Progress (?) Report

Nakhlites are olivine-bearing clinopyroxene cumulates [e.g., 1]. Based on petrographic characteristics, they may be divided into groups that cooled at different rates and may have been formed at different depths in a single flow [e.g., 2, 3]. The order of cooling rate is Lafayette < Governador Valadares ~ Nakhla < Yamato000593 < NWA817 ~ MIL03346. Nakhlite cumulus pyroxene grains consist of large cores that are nearly homogeneous in major element composition surrounded by thin rims that are zoned to Fe-rich compositions. Detailed study of these pyroxenes is important because they retain a record of the crystallization history of the nakhlite magma. Moreover, because the composition of the nakhlite parent melt cannot be directly determined, inversion of the major and minor element composition of the cumulate pyroxene cores can be used to estimate the composition of that melt. Thus it is important to understand the major and minor element zoning in the cumulus pyroxenes. We recently reported complications in the minor element zoning of nakhlite pyroxenes, especially for Al and Cr [4]. This abstract reports additional complications noted since that report.

McKay, G.↗

Microfluidic Fabrication of Nanoparticles Based on Ethyl Acrylate-Functionalized Chitosan for Adsorption of Methylene Blue from Aqueous Solutions

The adsorption of nanoparticle (NP)-based adsorbents especially those made of polymers to remove dyes as toxic substances from pollutants is yet remained as a critical issue. The objective of this work was to prepare microfluidic (MF) fabrication of NPs based on ethyl acrylate (EA)-functionalized chitosan (CS) for methylene blue (MB) dye removal from aqueous solutions. For this purpose, a series of experiments such as FTIR, SEM alongside DLS, and UV–vis spectrophotometry were carried out to investigate the physicochemical properties of the samples. The FTIR spectra showed that the amine (–NH{sub 2}) and hydroxyl (–OH) groups on CS structure were replaced with EA, appropriately. The SEM and DLS results depicted that EA-functionalized CS NPs fabricated using MF technique had uniform shapes, and the diameters as small as 70 nm compared to those samples produced via bulk mixing (BM) method (~ 300 nm). Moreover, the surface charge of MF-assisted CS NPs after functionalization exhibited the lower zeta potential value (~ + 11) than that of samples based on BM (~ + 14) due to occurring the laminar flow through the micro-channels embedded in the MF chip, leading to an increase in the MB adsorption. Subsequently, at the optimized amounts of the dye concentration (89.12 mg L{sup −1}), the adsorbent concentration (1.38 g L{sup −1}), and pH (10.58) by means of Box-Behnken design (BBD) method, the maximum percentage of MB removal by the use of MF-fabricated EA-functionalized CS NPs was 98.4%. By fitting the obtained adsorption data to the isotherm models such as Lagmuir, Freundlich, and Temkin, it has been found that the adsorption mechanism followed the Langmuir model (maximum capacity of the adsorption 384.61 mg/g), which assumed a monolayer coverage of MB molecules as adsorbates over a homogeneous adsorbent surface.

36 MATERIALS SCIENCE↗

A hybrid numerical method for three-dimensional spatially-developing free-shear flows

The present novel algorithm for 3D incompressible Navier-Stokes equations treats a domain which is (1) infinite in the vertical direction, using a mapped spectral method; (2) finite in the streamwise direction, using a classical Fourier method; and (3) homogeneous in the spanwise direction, using high-order compact finite differencing. A projection method is employed which ensures the exact conservation of mass, as well as the satisfaction of the boundary conditions at infinity. The novel aspects of these methods are noted, and the code they constitute is validated in light of several test cases. Results are presented for two- and three-dimensional mixing layers.

Buell, Jeffrey C.↗

Heat transfer and fluid dynamics of air-water two-phase flow in micro-channels

Heat transfer, pressure drop, and void fraction were simultaneously measured for upward heated air-water non-boiling two-phase flow in 0.51 mm ID tube to investigate thermo-hydro dynamic characteristics of two-phase flow in micro-channels. At low liquid superficial velocity j{sub l} frictional pressure drop agreed with Mishima-Hibiki's correlation, whereas agreed with Chisholm-Laird's correlation at relatively high j{sub l}. Void fraction was lower than the homogeneous model and conventional empirical correlations. To interpret the decrease of void fraction with decrease of tube diameter, a relation among the void fraction, pressure gradient and tube diameter was derived. Heat transfer coefficient fairly agreed with the data for 1.03 and 2.01 mm ID tubes when j{sub l} was relatively high. But it became lower than that for larger diameter tubes when j{sub l} was low. Analogy between heat transfer and frictional pressure drop was proved to hold roughly for the two-phase flow in micro-channel. But satisfactory relation was not obtained under the condition of low liquid superficial velocity. (author)

42 ENGINEERING↗

Damping of Superfluid Flow by a Thermal Cloud

One of the principal signatures of superfluidity is the frictionless flow of a superfluid through another substance. Here, we study the flow of a Bose-Einstein condensate through a thermal cloud and study its damping for different harmonic confinements and temperatures. The damping rates close to the collisionless regime are found to be in good agreement with Landau damping and become smaller for more homogeneous systems. In the hydrodynamic regime, we observe additional damping due to collisions, and we discuss the implications of these findings for superfluidity in this system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Catalytic C-O bond hydrogenolysis of tetrahydrofuran-dimethanol over metal supported WO x /TiO 2 catalysts

M-WO x /TiO 2 (M = Pt-, Rh-, Pd-, and Ru) catalysts were prepared and studied for tetrahydrofuran-dimethanol (THFDM) hydrogenolysis. All catalysts have a small metal particle size (< 2 nm) but show catalytic activities that differ by two orders of magnitude. From a combination of CO chemisorption and STEM, we conclude that this wide gap in activity is primarily due to overgrowth of WO x /TiO 2 covering the metal particle of the less-active catalysts. This overgrowth decreases the number of exposed hydrogenation sites in these catalysts, lowering the overall reaction rate. The catalyst with the highest activity (Pt-WO x /TiO 2 ) was studied at various pressures of H 2 , with catalytic activity passing through a maximum with increasing pressure. This is likely due to changes in the oxidation state of W δ+ on the catalyst surface, which changes from W 6+ to W 5+ and W 4+ with increasing hydrogen pressure. Moreover, H 2 can strongly adsorb on the catalyst surface and inhibit the activity at high hydrogen pressure. The apparent activation energy of THFDM conversion over Pt-WO x /TiO 2 is 47 kJ·mol -1 . Pt-WO x /TiO 2 showed a decrease in conversion from 45% to 23% over 46 h on stream in a continuous flow reactor. Catalyst deactivation is likely due to leaching of W. THFDM can be efficiently converted to 1,2,6-hexanetriol (HTO) in the presence of Pt/TiO 2 and homogeneous W salts.

1,6-hexanediol↗

Effect of cathode shape on vertical buffered electropolishing for niobium SRF cavities

This paper reports the research results of the effect of cathode shape during vertical buffered electropolishing (BEP) by employing a demountable single cell niobium (Nb) superconducting radio frequency (SRF) cavity. Several different cathode shapes such as, for instance, bar, ball, ellipsoid, and wheels of different diameters have been tested. Detailed electropolishing parameters including I–V characteristic, removal rate, surface roughness, and polishing uniformity at different locations inside the demountable cavity are measured. Similar studies are also done on conventional electropolishing (EP) for comparison. It is revealed that cathode shape has dominant effects for BEP especially on the obtaining of a suitable polishing condition and a uniform polishing rate in an Nb SRF single cell cavity. EP appears to have the same tendency. This paper demonstrates that a more homogeneous polishing result can be obtained by optimizing the electric field distribution inside the cavity through the modification of the cathode shape given the conditions that temperature and electrolyte flow are kept constant. Electric field distribution and electrolyte flow patterns inside the cavity are simulated via Poisson–Superfish and Solidworks respectively. Finally, with the optimal cathode shape, BEP shows a much faster polishing rate of ~2.5 μm/min and is able to produce a smoother surface finish in the treatments of single cell cavities in comparison with EP.

36 MATERIALS SCIENCE↗

Mechanisms for the generation of compositional heterogeneities in magma chambers

The two main hypotheses concerning the origin of compositional heterogeneities in magma chambers are discussed: (1) models in which the development of compositional zonation is simultaneous with the birth and growth of the magma body and (2) models in which zonation develops within an initially homogeneous batch of magma. The paper presents an overview of the geological possibilities and evaluates them on the basis of current research. Calculations are presented for boundary-layer flow in isothermal ternary component systems, and it is demonstrated that multicomponent diffusion effects may be very significant, as was earlier suggested by Trial and Spera (1988).

Trial, Alain F.↗