Search NASA⌕ Search

SEARCH · Search NASA

Results for “Ionic Conduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Fast Room-Temperature Mg-Ion Conduction in Clay-Like Halide Glassy Electrolytes

The discovery of mechanically soft solid-state materials with fast Mg-ion conduction is crucial for the development of solid-state magnesium batteries. In this paper, novel magnesium gallium halide compounds are reported that achieve high ionic conductivity of 0.47 mS cm -1 at room temperature. These Mg-ion conductors obtained by ball milling Mg and Ga salts exhibit clay-like mechanical properties, enabling intimate contact at the electrode–electrolyte interface during battery cycling. With a combination of experimental and computational analysis, this study identifies that the soft-clay formation is induced by partial anion exchange during milling. This partial anion exchange creates undercoordinated magnesium ions in a chlorine-rich environment, yielding fast Mg-ion conduction. This work demonstrates the potential of clay-like halide electrolytes for all-solid-state magnesium batteries, with possible further extension to other multivalent battery systems.

36 MATERIALS SCIENCE↗

Phase transition and conduction mechanism in Pb{sub 2}Na{sub 0.8}R{sub 0.2}Nb{sub 4.8}Fe{sub 0.2}O{sub 15} material (R=rare earth)

Electrical properties of Pb{sub 2}Na{sub 0.8}Eu{sub 0.2}Nb{sub 4.8}Fe{sub 0.2}O{sub 15} tungsten bronze compound were investigated. Ferroelectric phase transition of diffuse type is observed at 395 °C. Conductivity study as a function of temperature (RT-600 °C) and at three different frequencies (10, 100 and 1000 kHz) suggests the existence of dominant ionic conduction. The rise of ac conductivity on increasing temperature supports the NTCR (negative temperature coefficient of resistance) behaviour of the material. The activation energies have been evaluated from ac conductivity using Arrhenius equation and discussed. Different conduction mechanisms were identified. For comparison, the conducting properties of Pb{sub 2}Na{sub 0.8}R{sub 0.2}Nb{sub 4.8}Fe{sub 0.2}O{sub 15} (R=Dy, Nd, La) were also investigated. - Graphical abstract: Thermal evolution of lnσ{sub ac} of Pb{sub 2}Na{sub 0.8}Eu{sub 0.2}Nb{sub 4.8}Fe{sub 0.2}O{sub 15} at selected frequencies. Display Omitted - Highlights: • We found that TB compounds exhibit a diffuse type of first- order transition. • A negative temperature coefficient of resistance (NTCR) behaviour is observed. • Three conduction mechanisms were identified: n-and/or p-type at low temperatures. • The conduction mechanism in the studied compounds is very complex.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Room-Temperature All-solid-state Rechargeable Sodium-ion Batteries with a Cl-doped Na 3 PS 4 Superionic Conductor

All-solid-state sodium-ion batteries are promising candidates for large-scale energy storage applications. The key enabler for an all-solid-state architecture is a sodium solid electrolyte that exhibits high Na + conductivity at ambient temperatures, as well as excellent phase and electrochemical stability. In this work, we present a first-principles-guided discovery and synthesis of a novel Cl-doped tetragonal Na 3 PS 4 (t-Na 3-x PS 4-x Cl x ) solid electrolyte with a room-temperature Na(+) conductivity exceeding 1 mS cm(-1). We demonstrate that an all-solid-state TiS 2 /t-Na 3-x PS 4-x Cl x /Na cell utilizing this solid electrolyte can be cycled at room-temperature at a rate of C/10 with a capacity of about 80 mAh g -1 over 10 cycles. We provide evidence from density functional theory calculations that this excellent electrochemical performance is not only due to the high Na(+) conductivity of the solid electrolyte, but also due to the effect that "salting" Na 3 PS 4 has on the formation of an electronically insulating, ionically conducting solid electrolyte interphase.

25 ENERGY STORAGE↗

Effect of H + Exchange and Surface Impurities on Bulk and Interfacial Electrochemistry of Garnet Solid Electrolytes

Contact loss and current constriction pose significant challenges at the Li metal interface of solid-state batteries. For garnet-structured Li 7 La 3 Zr 2 O 12 (LLZO), these effects are amplified by Li + /H + exchange and surface contamination reactions, which lead to conductivity losses and poor Li wetting. In this study, we utilize a variety of surface treatment processes across 37 cells to selectively induce proton exchange and contamination reactions in LLZO. The resulting bulk and surface chemistry is systematically characterized and correlated to changes in electrochemical properties. Additionally, we combine impedance analysis and finite element method modeling to deconvolute sources of impedance contributions at the Li metal interface. Specifically, we show that constriction impedance at the Li metal interface arises not solely from voids, but also from ionically-resistive surface contaminants. Further, these findings emphasize the connection between ionic conductivity and constriction, demonstrating that micron-scale ionically-resistive components increase constriction even with identical contact geometries. Finally, we leverage our comprehensive dataset to highlight unstable overpotential growth as a failure mechanism, additionally showing that the phase of a cell’s impedance is a sensitive indicator for the onset of interfacial instability. Overall, this study clarifies the impacts of proton exchange and surface contamination on electrochemical properties at the Li|solid electrolyte interface and elucidates insights that are generalizable to other solid-state battery systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simultaneous oxygen and boron trifluoride functionalization of hexagonal boron nitride: a designer cathode material for energy storage

Covalent functionalization is a way to tune the electrochemical properties of hexagonal boron nitride (h-BN) monolayers. The wide bandgap insulator h-BN may become metallic conductor upon functionalization with strong oxidants, such as (fluorosulfonyl)oxy radicals (·OSO 2 F), as known since 1978 ( Bartlett et al in J Chem Soc Chem Commun 5:200, 1978), with electrical conductivity of 1.5 S/cm (Shen et al in J Solid State Chem 147:74, 1999) that greatly surpasses commercial cathode material Li x CoO 2 while retaining excellent ionic conductivity. Functionalized boron nitrides (FBN-s) have great potential for cathode applications in energy storage devices, for example, in solid-state batteries. While (fluorosulfonyl)oxy functionalization is unlikely to result in rechargeable cathodes, similarly to graphene fluoride (CF x ), some other FBN-s discussed here may do. In the present work, fluorene, oxygen and combined oxygen and boron trifluoride functionalizations are studied, on the basis of band structure calculations. Due to the open surfaces of FBN-s, fast ionic diffusion with Li, Na and Mg ions is possible, enabling batteries with voltages of 2.1–5.6 V, theoretical energy densities of 800–1200 Wh/kg and fast charge and discharge.

Chemistry↗

Development of lithium ion conducting interface between lithium metal and a lithium ion conducting ceramic using block polymers

The lithium-air (Li-air) technology developed by EDF uses an air electrode which works with an aqueous electrolyte, which prevent the use of unprotected lithium metal electrode. A Li+ ionic conductor glass ceramic is used to separate the aqueous electrolyte compartment from the negative lithium electrode. However, this glass-ceramic is not stable in contact with lithium, it is thus necessary to add a protective buffer layer. In another hand, this protection should ideally resist to lithium dendritic growth. It is in this context that this research project which has as goal the development of a protective buffer layer based on block copolymer electrolytes (BCE) between the lithium metal and the lithium ionic conductor ceramic, for lithium-air battery. In a first part, the BCE is studied in lithium-lithium symmetric cells, in order to determine their electrochemical properties such as ionic conductivity, steady state transference number, and finally their resistance to dendritic growth during cycling. Several characterization techniques were employed and especially hard X-ray micro-tomography to analyze the lithium morphology before and after cycling. For single-ion BCE, we expect to suppress dendritic growth, however, we report here for the first time, the visualization of a homogeneous growth of lithium but the formation of dense lithium objects. In another part, the composite BCE-ceramic is studied by electrochemical impedance spectroscopy (EIS). The cycling of lithium-composite-lithium symmetric cells and the analysis of the EIS measurement after each cycle permit to determine if the dendrites have cross the protective layer and are in contact with the ceramic. Besides, the quantification of the polarization loss at the interface polymer-ceramic is evaluated by polarization experiments. This contribution is found to be small.

36 MATERIALS SCIENCE↗

Braunite phase embedded Y2O3/MnO2-Al2O3-CaO-SiO2 glass ceramics and their properties

Highlights: • Nucleation of synthetic braunite structure (Mn{sub 7}SiO{sub 12}) on sintering of Y{sub 2}O{sub 3}/MnO{sub 2}-CaO-Al{sub 2}O{sub 3}-SiO{sub 2} glasses at 850 °C. • Lossy capacitor behaviour. • Exhibits a critical temperature in 500–600 °C range. • Conduction mechanism shift from Superlinear power law to universal dielectric response law with increase in temperature. - Abstract: Glass series (20-x)Y{sub 2}O{sub 3}-xMnO{sub 2}-20Al{sub 2}O{sub 3}-40SiO{sub 2}-20CaO (x = 5, 10, 15 and 20, mol%) have been synthesized by melt quench technique followed by sintering at 850 °C. The optical band gap of the samples is in wide semiconductor range and increased with MnO{sub 2} content. Photoluminescence study exhibits emission in Mn{sup 2+} d-states. On the other hand, hardness decreases with MnO{sub 2} content except for 10 mol% MnO{sub 2} containing glasses (YM10). The formation of braunite phase in glass ceramics induces capacitive losses. In lower temperature region, the conductivity behaviour of samples follows superlinear power law. In higher temperature region, it follows the universal law of conduction. The dielectric constant for the sintered glasses is constant with respect to temperature, approximately upto 350 °C and 1 MHz frequency. Above 350 °C, the ionic conduction dominates in all the sintered glasses. The anomaly in properties is observed when the ratio of Y{sub 2}O{sub 3}/MnO{sub 2} is 1:1.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Highly Stable, Anion Conductive, Comb-Shaped Copolymers for Alkaline Fuel Cells

To produce an anion-conductive and durable polymer electrolyte for alkaline fuel cell applications, a series of quaternized poly(2,6-dimethyl phenylene oxide)s containing long alkyl side chains pendant to the nitrogen-centered cation were synthesized using a Menshutkin reaction to form comb-shaped structures. The pendant alkyl chains were responsible for the development of highly conductive ionic domains, as confirmed by small-angle X-ray scattering (SAXS). The comb-shaped polymers having one alkyl side chain showed higher hydroxide conductivities than those with benzyltrimethyl ammonium moieties or structures with more than one alkyl side chain per cationic site. The highest conductivity was observed for comb-shaped polymers with benzyldimethylhexadecyl ammonium cations. The chemical stabilities of the comb-shaped membranes were evaluated under severe, accelerated-aging conditions, and degradation was observed by measuring IEC and ion conductivity changes during aging. The comb-shaped membranes retained their high ion conductivity in 1 M NaOH at 80 degrees C for 2000 h. These cationic polymers were employed as ionomers in catalyst layers for alkaline fuel cells. The results indicated that the C-16 alkyl side chain ionomer had a slightly better initial performance, despite its low IEC value, but very poor durability in the fuel cell. In contrast, 90% of the initial performance was retained for the alkaline fuel cell with electrodes containing the C-6 side chain after 60 h of fuel cell operation.

Li, NW↗

Solvent-Free and Non-Sintered 500 Wh/kg All Solid-State Battery

Navitas teamed up with UMD and ORNL to establish a reliable scientific research team. The project addressed processing limitations of state-of-the-art solid electrolytes by extending solvent-free electrode fabrication technology to the scalable production of cathode/solid electrolyte laminates. The innovation started with a solid-state sulfide electrolyte (LiPS) with Cl stabilization able to meet the keystone conductivity challenge in a film of practical thickness (μ 50 µm). The electrolyte was based on a composite of PTFE, and stabilized LiPSCl. With optimization, the ionic conductivity reached 3.3 ×10 -3 S/cm. The solid electrolyte with as low as 0.4% binder allowed long term cycling (> 500 cycles) of Li/SSE/Li cell at > 4 mA/cm 2 with the utilization of Li > 80%. The Li and SSE interfaces were successfully protected with LiF-rich SEI layer. NCM811cathode active materials were coated with a thin layer of Al 2 O 3 (5 nm). The free standing cathode film was fabricated through dry-process with Al2O3-coated NCM811, LiPSCl, active carbon, and small amount PTFE. The all-solid-state batteries were laminated with free standing surface coated NCM811 cathode film, free standing LiPSCl SSE film, and surface protected Li anode together in a single lamination step, and demonstrated high specific capacity (> 200 mAh/g) with coulombic efficiency > 99.5%. The all-solid-state batteries through solvent-free and no-sintering process are promising for large format cell with 500 Wh/Kg specific energy density.

25 ENERGY STORAGE↗

Solid-State Hydroxide Ion Conductivity in Silver(I) Oxide, Ag 2 O

Silver (I) oxide, Ag 2 O, precipitated as microcrystals by combining aqueous silver(I) nitrate and KOH solutions, was found to be a solid-state hydroxide ion conductor with ionic conductivity on the order of 10 -3 S/cm. The proton chemical shifts at 4.87 and -7.35 ppm measured by solid-state 1H-NMR experiments are attributed to water molecules and in-lattice OH - coordinated to silver, respectively. The lack of spinning sidebands around the 4.87 ppm peak indicates rapid reorientation on the NMR timescale, suggesting that the water molecules are adsorbed to the surface of the Ag 2 O crystals. Pulsed field gradient measurements gave similar diffusion coefficients (2 x 10 -7 cm 2 /s at 298K) for all three proton environments indicating chemical exchange between sites on the millisecond timescale. The activation energy for OH - diffusion measured by NMR (0.18 eV) was comparable to that obtained by conductivity measurements and density functional theory (DFT) electronic structure calculations. Furthermore, the calculated Pourbaix diagram of Ag 2 O is consistent with the slightly lower sample density observed in He pycnometry and thermogravimetric measurements.

25 ENERGY STORAGE↗

Cycling of block copolymer composites with lithium-conducting ceramic nanoparticles

Solid polymer and perovskite-type ceramic electrolytes have both shown promise in advancing solid-state lithium metal batteries. Despite their favorable interfacial stability against lithium metal, polymer electrolytes face issues due to their low ionic conductivity and poor mechanical strength. Highly conductive and mechanically robust ceramics, on the other hand, cannot physically remain in contact with redox-active particles that expand and contract during charge-discharge cycles unless excessive pressures are used. To overcome the disadvantages of each material, polymer-ceramic composites can be formed; however, depletion interactions will always lead to aggregation of the ceramic particles if a homopolymer above its melting temperature is used. In this study, we incorporate Li 0.33 La 0.56 TiO 3 (LLTO) nanoparticles into a block copolymer, polystyrene- b -poly (ethylene oxide) (SEO), to develop a polymer-composite electrolyte (SEO-LLTO). TEMs of the same nanoparticles in polyethylene oxide (PEO) show highly aggregated particles whereas a significant fraction of the nanoparticles are dispersed within the PEO-rich lamellae of the SEO-LLTO electrolyte. We use synchrotron hard x-ray microtomography to study the cell failure and interfacial stability of SEO-LLTO in cycled lithium-lithium symmetric cells. Three-dimensional tomograms reveal the formation of large globular lithium structures in the vicinity of the LLTO aggregates. Encasing the SEO-LLTO between layers of SEO to form a “sandwich” electrolyte, we prevent direct contact of LLTO with lithium metal, which allows for the passage of seven-fold higher current densities without signatures of lithium deposition around LLTO. We posit that eliminating particle clustering and direct contact of LLTO and lithium metal through dry processing techniques is crucial to enabling composite electrolytes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On Direct Observation of Diffusion by Aberration-Corrected HREM

Renewable energy sources such as wind and solar energy, despite their abundance and availability, are variable and uncontrolled [1]. A continuous supply of clean energy therefore requires a significant expansion in energy storage and conversion technologies. Solid electrolytes enable technologies that can both convert (fuel cells) and store (batteries) electrical energy. The ability of solid electrolytes to conduct ions will depend largely on microstructural defects in the material. Line and planar defects can scatter ions or build up a space-charge layer to affect ionic conductivity. More fundamentally, the diffusion of ions will be closely correlated to point-defect diffusion. Our aim is to conduct dynamic in-situ experiments to study the role of defects in a solid electrolyte by direct observation of atomic motion at and along defects using aberration-corrected HREM. Since conductivity (σ) is proportional to jump frequency (Γ), experiments that directly observe jump frequency will provide fundamental insight into charge-transport processes in these materials.

36 MATERIALS SCIENCE↗

Gating of Hydrophobic Nanopores with Large Anions

In this report, understanding ion transport in nanoporous materials is critical to a wide variety of energy and environmental technologies, ranging from ion-selective membranes, drug delivery, and biosensing, to ion batteries and supercapacitors. While nanoscale transport is often described by continuum models that rely on a point charge description for ions and a homogeneous dielectric medium for the solvent, here, we show that transport of aqueous solutions at a hydrophobic interface can be highly dependent on the size and hydration strength of the solvated ions. Specifically, measurements of ion current through single silicon nitride nanopores that contain a hydrophobic-hydrophilic junction show that transport properties are dependent not only on applied voltage but also the type of anion. We find that in Cl - -contained solutions the nanopores only conducted ionic current above a negative voltage threshold. On the other hand, introduction of large polarizable anions, such as Br - and I - , facilitated the pore wetting, making the pore conductive at all examined voltages. Molecular dynamics simulations revealed that the large anions, Br - and I - , have a weaker solvation shell compared to that of Cl - , and consequently were prone to migrate from the aqueous solution to the hydrophobic surface, leading to the anion accumulation responsible for pore wetting. The results are essential for designing nanoporous systems that are selective to ions of the same charge, for realization of ion-induced wetting in hydrophobic pores, as well as for fundamental understanding on the role of ion hydration shell on the properties of solid/liquid interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanothin film conductivity measurements reveal interfacial influence on ion transport in polymer electrolytes

The interfacial region where ion-transporting polymer chains are anchored to a hard, insulating phase is a major factor dictating the limits of ion-conduction in nanostructure-forming electrolytes. In this work, we investigate the effect of an end-grafted poly(ethylene oxide) (20 kg mol –1 ) surface on the ionic conductivity σ of PEO and lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) salt mixtures. Specifically, we characterize nanothin films in the range of ca. 10 to 250 nm, which amplify the contributions from the polymer/substrate interface that dictate any deviations from expected bulk conductivity σ bulk values. Conductivity measurements reveal a monotonic decrease in σ upon decreasing film thickness at all values of r ( r = molar ratio of Li + to EO units). The reduction from bulk-like σ occurs for film thicknesses approximately 100 nm and below for all values of r . This trend in conductivity arises from the presence of the underlying grafted-PEO layer. Through a thickness dependence normalized conductivity study, we observe nanoscale constraints leading to deviation from intrinsic conductivity of bulk PEO–LiTFSI electrolytes. Here, these nanoscale constraints correspond to an immobile interfacial zone whose thickness h int ranges from 9.5 ± 1.4 nm at r = 0.01 to 2.9 ± 1.5 nm at r = 0.15 in our nanothin films that impedes ion transport. Overall, we have presented a robust platform that facilitates probing the role of polymer-grafted surfaces on the σ of polymer electrolytes.

36 MATERIALS SCIENCE↗

Lithium-sulfur battery with high sulfur loading

A lithium-sulfur battery cathode including conductive porous carbon particles vacuum infused with sulfur and a conductive collector substrate to which the sulfur infused porous carbon particles are deposited. The sulfur infused carbon particles are encapsulated by an encapsulation polymer, the encapsulation polymer having ionic conductivity, electronic conductivity, polysulfide affinity, or combinations thereof. A lithium-sulfur battery including the lithium-sulfur battery cathode, a lithium anode and an electrolyte disposed between the sulfur cathode and the lithium anode is also provided. Methods of producing the sulfur cathode for use in a lithium-sulfur battery by a hybrid vacuum-and-melt method are also provided.

Henslee, Brian E.↗

Photoresponsive Rotaxanes Switch Lipid Bilayer Neuromorphic Behavior with Light

A rotaxane consisting of a macrocycle ring with two azobenzene units mechanically interlocked onto a bolaamphiphilic axle was incorporated into droplet interface bilayers (DIBs). The azobenzene groups on the ring underwent quasi-reversible, photoisomerization-induced cycling between 1-E and 1-Z configurations when irradiated with 370 and 467 nm light, respectively, enabling programmable access to different history-dependent electrical behaviors from the same membrane. In the 1-E configuration, bilayers exhibited type-IIactive memristance that coincided with increasingly elevated ionic conduction, associated with progressively enhanced bilayer permeability during voltage cycling. In the 1-Z configuration, bilayers displayed type-I, passive memcapacitive behavior, reflecting tighter lipid packing and reduced ionic permeability. Photoswitching also yielded a nonvolatile, photoresponsive memcapacitor that could be modulated repetitively with negligible loss, likely via reversible changes in membrane thickness. Concurrent ohmic leakage currents across the membrane were less than 0.3%. These results agree with previous studies with increasing membrane permeability using photoswitchable rotaxanes and provide new insights into the coupling between volatile and nonvolatile memcapacitance during photoisomerization. More broadly, they demonstrate a new strategy for the manipulation of neuromorphic behaviors in soft materials using light, with implications for brain-inspired computation and sensing.

droplet interface bilayers↗

Cyclic olefin copolymer-based reinforced anion exchange membranes for water electrolyzers

Anion exchange membranes (AEMs) have emerged as a promising technology for water electrolysis in hydrogen production since they offer significant cost reduction in choices of electrocatalysts and bipolar plates. However, AEMs satisfying multiple requirements of high ionic conductivity, good chemical stability, robust mechanical properties, scalable synthesis, and low manufacturing costs are rare. Herein, we introduce quaternary ammonium functionalized cyclic olefin copolymers (COCs) as a new class of chemically stable and low-cost AEM materials. To further enhance the mechanical robustness, we prepared reinforced composite AEMs by impregnating the ionically functionalized COC into a mechanically robust matrix. The resulting reinforced composite membrane exhibits a high hydroxide conductivity of 127 mS cm −1 and excellent mechanical strength. In water electrolyzers, the MEA demonstrated outstanding performance, achieving a current density of 2.24 A cm −2 at 1.8 V, attributable to high conductivity, enhanced mechanical properties, and good alkaline stability of the composite membrane. These results indicate that the COC-based AEMs demonstrate good potential for application in AEM electrolyzers.

08 HYDROGEN↗

Role of Defects in Ion Transport in Block Copolymer Electrolytes

Ion conducting block copolymers can overcome traditional limitations of homopolymer electrolytes by phase separating into nanoarchitectures that can be simultaneously optimized for two or more orthogonal material properties such as high ionic conductivity and mechanical stability. A key challenge in understanding the ion transport properties of these materials is the difficulty of extracting structure-function relationships without having complete knowledge of all nanoscale transport pathways in bulk samples. In this paper, we demonstrate a method for deriving structure-transport relationships for ion conducting block copolymers using thin films and interdigitated electrodes. Well-defined and directly imaged structure in films of poly(styrene)-block-poly(2-vinylpyridine) is controlled using techniques of directed self-assembly then the poly(2-vinylpyridine) is selectively converted into an ion conductor. The ion conductivity is found to be directly proportional to the total number of connected paths between electrodes and the path length. A single defect such as a dislocation anywhere in the path of an ion conducting route disconnects and precludes that pathway from contributing to the conductivity and results in an increase in the dielectric parameter of the film. When all the ion conduction pathways are blocked between electrodes, the conductivity is negligible, 4 orders of magnitude lower compared to a completely connected morphology and the dielectric parameter increases by a factor of 50. Lastly, these results have profound implications for the interpretation, design, and processing of block copolymer electrolytes for applications as ion conducting membranes.

36 MATERIALS SCIENCE↗