Search NASA⌕ Search

SEARCH · Search NASA

Results for “LIGNITE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Methodology for tomographic imaging ahead of mining using the shearer as a seismic source

Poor rock conditions in a coal long wall panel can result in roof collapse when a problematic zone is mined, significantly interrupting mine production. The ability to image rock conditions (stress and degree of fracturing) ahead of the face gives the miners the ability to respond proactively to such problems. This method uses the energy from mining machinery, in this case a coal shearer, to produce an image of the rock velocity ahead of the mining face without interrupting mining. Data from an experiment illustrates the concept. Geophones installed in gate-road roofs record the noise generated by the shearer after it has traversed the panel ahead of the mining face. A generalized crosscorrelation of the signals from pairs of sensors determines relative arrival times from the continuous seismic noise produced by the shearer. These relative times can then be inverted for a velocity structure. The crosscorrelations, performed in the frequency domain, are weighted by a confidence value derived from the spectral coherence between the traces. This produces stable crosscorrelation lags in the presence of noise. The errors in the time-domain data are propagated through to the relative traveltimes and then to the final tomographic velocity image, yielding an estimate of the uncertainty in velocity at each point. This velocity image can then be used to infer information about the stress and fracture state of the rock, providing advance warning of potentially hazardous zones.

01 COAL, LIGNITE, AND PEAT↗

These lives will not be lost in vain: organizational learning from disaster in US coal mining

The stated purpose of the investigations that invariably follow industrial, transportation, and mining disasters is to learn from those tragedies to prevent future tragedies. But does prior experience with disaster make organizations more capable of preventing future disasters? Do organizations learn from disasters experienced by other organizations? Do organizations learn differently from rare disasters than they do from common minor accidents? In its present state, the organizational safety literature is poorly equipped to answer these questions. The present work begins to address this gap by empirically examining how prior organizational experience with disaster affects the likelihood that organizations will experience future disasters. It approaches the issue in the context of fatal U.S. coal mining accidents from 1983 to 2006. The analysis demonstrates that organizations do learn to prevent future disasters through both direct and vicarious experience with disaster. It also indicates that the mechanisms through which organizations learn from disasters differ from those through which they learn from minor accidents.

01 COAL, LIGNITE, AND PEAT↗

Estimating individual-level exposure to airborne polycyclic aromatic hydrocarbons throughout the gestational period based on personal, indoor, and outdoor monitoring

Current understanding on health effects of long-term polycyclic aromatic hydrocarbon (PAH) exposure is limited by lack of data on time-varying nature of the pollutants at an individual level. In a cohort of pregnant women in Krakow, Poland, we examined the contribution of temporal, spatial, and behavioral factors to prenatal exposure to airborne PAHs within each trimester and developed a predictive model of PAH exposure over the entire gestational period. The observed personal, indoor, and outdoor B(a)P levels we observed in Krakow far exceed the recommended Swedish guideline value for B(a)P of 0.1 ng/m{sup 3}. Based on simultaneously monitored levels, the outdoor PAH level alone accounts for 93% of total variability in personal exposure during the heating season. Living near the Krakow bus depot, a crossroad, and the city, center and time spent outdoors or commuting were not associated with higher personal exposure. During the nonheating season only, a 1-hr increase in environmental tobacco smoke (ETS) exposure was associated with a 10-16% increase in personal exposure to the nine measured PAHs. A 1{degree}C decrease in ambient temperature was associated with a 3-5% increase in exposure to benz(a)anthracene, benzo(k)fluoranthene, and dibenz(a,h)anthracene, after accounting for the outdoor concentration. A random effects model demonstrated that mean personal exposure at a given gestational period depends on the season, residence location, and ETS. Considering that most women reported spending < 3 hr/day outdoors, most women in the study were exposed to outdoor-originating PAHs within the indoor setting. Cross-sectional, longitudinal monitoring supplemented with questionnaire data allowed development of a gestation-length model of individual-level exposure with high precision and validity.

01 COAL, LIGNITE, AND PEAT↗

Coal use, stove improvement, and adult pneumonia mortality in Xuanwei, China: a retrospective cohort study

In Xuanwei County, China, unvented indoor coal burning is strongly associated with increased risk of lung cancer and chronic obstructive pulmonary disease. However, the impact of coal burning and stove improvement on risk of pneumonia is not clear. We conducted a retrospective cohort study among all farmers born 1917 through 1951 and living in Xuanwei as of 1 January 1976. The analysis included a total of 42,422 cohort members. Follow-up identified all deaths in the cohort from 1976 through 1996. Ages at entry into and at exit from follow-up ranged from 24 to 59 years and from 25 to 80 years, respectively. The record search detected 225 deaths from pneumonia, and 32,332 (76%) were alive as of 31 December 1996. We constructed multivariable Cox models (time variable = age) to estimate hazard ratios (HRs) and 95% confidence intervals (CIs). Use of coal, especially smokeless coal, was positively associated with pneumonia mortality. Annual tonnage and lifetime duration of smoky and smokeless coal use were positively associated with pneumonia mortality. Stove improvement was associated with a 50% reduction in pneumonia deaths (smoky coal users: HR, 0.521; 95% CI, 0.340-0.798; smokeless coal users: HR, 0.449; 95% CI, 0.215-0.937). Our analysis is the first to suggest that indoor air pollution from unvented coal burning is an important risk factor for pneumonia death in adults and that improving ventilation by installing a chimney is an effective measure to decrease it.

01 COAL, LIGNITE, AND PEAT↗

Balancing act creating the right regulation for coal combustion waste

The December 2008 collapse of a coal ash pond in Tennessee threw safe management of coal combustion waste (CCW) into the spotlight. Millions of tons of CCW are produced in the United States each year, and a large percentage of that is recycled. The US Environmental Protection Agency is pursuing a host of initiatives that could directly or indirectly affect the disposition of CCW. States, too, are taking a look at how they regulate CCW. Among the options is the possibility of regulating CCW under the Resource Conservation and Recovery Act, a move that could have far-reaching implications for both the recycling and the disposal of this waste.

01 COAL, LIGNITE, AND PEAT↗

Quality of Wood Pellets Produced in British Columbia for Export

Wood pellet production and its use for heat and power production are increasing worldwide. The quality of export pellets has to consistently meet certain specifications as stipulated by the larger buyers, such as power utilities or as specified by the standards used for the non-industrial bag market. No specific data is available regarding the quality of export pellets to Europe. To develop a set of baseline data, wood pellets were sampled at an export terminal in Vancouver, British Columbia, Canada. The sampling period was 18 months in 2007-2008 when pellets were transferred from storage bins to the ocean vessels. The sampling frequency was once every 1.5 to 2 months for a total of 9 loading/shipping events. The physical properties of the wood pellets measured were moisture content in the range of 3.5% to 6.5%, bulk density from 728 to 808 kg/m3, durability from 97% to 99%, fines content from 0.03% to 0.87%, calorific value as is from 17 to almost 18 MJ/kg, and ash content from 0.26% to 0.93%.The diameter and length were in the range of 6.4 to 6.5 mm and 14.0 to 19.0 mm, respectively. All of these values met the published non-industrial European grades (CEN) and the grades specified by the Pellet Fuel Institute for the United States for the bag market. The measured values for wood pellet properties were consistent except the ash content values decreased over the test period.

09 BIOMASS FUELS↗

Effect of process variables on the quality attributes of briquettes from wheat, oat, canola and barley

Effect of process variables on the quality attributes of briquettes from wheat, oat, canola and barley straw Jaya Shankar Tumuluru*, L. G. Tabil, Y. Song, K. L. Iroba and V. Meda Biomass is a renewable energy source and environmentally friendly substitute for fossil fuels such as coal and petroleum products. Major limitation of biomass for successful energy application is its low bulk density, which makes it very difficult and costly to transport and handle. To overcome this limitation, biomass has to be densified. The commonly used technologies for densification of biomass are pelletization and briquetting. Briquetting offers many advantages at it can densify larger particles sizes of biomass at higher moisture contents. Briquetting is influenced by a number of feedstock and process variables such as moisture content, particle size distribution, and some operating variables such as temperature and densification pressure. In the present study, experiments were designed and conducted based on Box-Behnken design to produce briquettes using barley, wheat, canola and barley straws. A laboratory scale hydraulic briquette press was used for the present study. The experimental process variables and their levels used in the present study were pressure levels (7.5, 10, 12.5 MPa), three levels of temperature (90, 110, 130 C), at three moisture content levels (9, 12, 15% w.b.), and three levels of particle size (19.1, 25.04, 31.75 mm). The quality variables studied includes moisture content, initial density and final briquette density after two weeks of storage, size distribution index and durability. The raw biomass was initially chopped and size reduced using a hammer mill. The ground biomass was conditioned at different moisture contents and was further densified using laboratory hydraulic press. For each treatment combination, ten briquettes were manufactured at a residence time of about 30 s after compression pressure setpoint was achieved. After compression, the initial dimensions and the final dimensions after 2 weeks of storage in controlled environment of all the samples were measured. Durability, dimensional stability, and moisture content tests were conducted after two weeks of storage of the briquettes produced. Initial results indicated that moisture content played a significant role on briquettes durability, stability, and density. Low moisture content of the straws (7-12%) gave more durable briquettes. Briquette density increased with increasing pressure depending on the moisture content value. The axial expansion was more significant than the lateral expansion, which in some cases tended to be nil depending on the material and operating variables. Further data analysis is in progress in order to understand the significance of the process variables based on ANOVA. Regression models were developed to predict the changes in quality of briquettes with respect of the process variables under study. Keywords: Herbaceous biomass, densification, briquettes, density, durability, dimensional stability, ANOVA and regression equations

01 COAL, LIGNITE, AND PEAT↗

Impact of Screening on Behavior During Storage and Cost of Ground Small-Diameter Pine Trees: A Case Study

Whole comminuted trees are known to self-heat and undergo quality changes during storage. Trommel screening after grinding is a process that removes fines from the screened material and removes a large proportion of high-ash, high-nutrient material. In this study, the trade-off between an increase in preprocessing cost from trommel screening and an increase in quality of the screened material was examined. Fresh lodgepole pine (Pinus contorta) was comminuted using a drum grinder with a 10-cm screen, and the resulting material was distributed into separate fines and overs piles. A third pile of unscreened material, the unsorted pile, was also examined. The three piles exhibited different characteristics during a 6-week storage period. The overs pile was much slower to heat. The overs pile reached a maximum temperature of 56.88 degrees C, which was lower than the maximum reached by the other two piles (65.98 degrees C and 63.48 degrees C for the unsorted and fines, respectively). The overs also cooled faster and dried to a more uniform moisture content and had a lower ash content than the other two piles. Both piles of sorted material exhibited improved airflow and more drying than the unsorted material. Looking at supply system costs from preprocessing through in-feed into thermochemical conversion, this study found that trommel screening reduced system costs by over $3.50 per dry matter ton and stabilized material during storage.

01 COAL, LIGNITE, AND PEAT↗

Design of a laser-induced breakdown spectroscopy system for on-line quality analysis of pulverized coal in power plants

It is vitally important for a power plant to determine the chemical composition of coal prior to combustion in order to obtain optimal boiler control. In this work, a fully software-controlled laser-induced breakdown spectroscopy (LIBS) system comprising a LIBS apparatus and sampling equipment has been designed for possible application to power plants for on-line quality analysis of pulverized coal. Special attention was given to the LIBS system, the data processing methods (especially the normalization with Bode Rule/DC Level) and the specific settings (the software-controlled triggering source, high-pressure gas cleaning device, sample preparation module, sampling module, etc.), which gave the best direct measurement for C, H, Si, Na, Mg, Fe, Al, and Ti with measurement errors less than 10% for pulverized coal. Therefore, the apparatus is accurate enough to be applied to industries for on-line monitoring of pulverized coal. The method of proximate analysis was also introduced and the experimental error of A(ad) (Ash, 'ad' is an abbreviation for 'air dried') was shown in the range of 2.29 to 13.47%. The programmable logic controller (PLC) controlled on-line coal sampling equipment, which is designed based upon aerodynamics, and is capable of performing multipoint sampling and sample-preparation operation.

01 COAL, LIGNITE, AND PEAT↗

Viscosity Determination of Molten Ash from Low-Grade US Coals

In entrained slagging gasifiers, the fluidity of the molten ash is a critical factor for process control since it affects slag formation, the capture of inorganic constituents, refractory wear, and slag drainage along the gasification chamber walls. The use of western coal, or mixtures of eastern and western coals as gasifier feedstock, is likely to occur as western coals become available and technological issues that hinder their use are being resolved. In the present work, the viscosity of synthetic slags with ash chemistries simulating the western U.S. coals, was experimentally measured at a Po 2 = 10 - 8 atm in the temperature range of 1773–1573 K (1500–1300 °C) using a rotating-bob viscometer. Alumina spindles and containment crucibles of both alumina and zirconia were used. Crystallization studies of this slag using a confocal scanning laser microscope found that a (Mg,Fe)Al 2 O 4 -based spinel precipitated at temperatures below 1723 K (1450 °C), and this agreed with FactSage equilibrium phase prediction. The same spinels were observed in the post-viscometry experiment slags when ZrO 2 crucibles were used and assumed to be in equilibrium with the slag at the higher temperatures. Zirconia dissolution resulted in a slight increase in the solid fraction present in slags at lower temperatures, compared to spinel fraction. Crystal precipitation changed the apparent activation energy and required a longer stabilization times for viscosity measurements. The viscosity results were used in predictive equations based on Veytsman and Einstein's models, with critical nucleation temperatures and the solid fraction calculated with FactSage. In the simulated eastern/western coal feedstock blends based on ash compositions, the fractions of the solid precipitates were also calculated using the thermodynamic program FactSage for each blend composition, and the plastic viscosity of each eastern/western coal slag blend was predicted using Veytsman's model and compared to available experimental data.

01 COAL, LIGNITE, AND PEAT↗

Evaluation of the effects of coal fly ash amendments on the toxicity of a contaminated marine sediment

Approaches for cleaning up contaminated sediments range from dredging to in situ treatment. In this study, we discuss the effects of amending reference and contaminated sediments with coal fly ash to reduce the bioavailability and toxicity of a field sediment contaminated with polycyclic aromatic hydrocarbons (PAHs). Six fly ashes and a coconut charcoal were evaluated in 7-d whole sediment toxicity tests with a marine amphipod (Ampelisca abdita) and mysid (Americamysis bahia). Fly ashes with high carbon content and the coconut charcoal showed proficiency at reducing toxicity. Some of the fly ashes demonstrated toxicity in the reference treatments. It is suspected that some of this toxicity is related to the presence of ammonia associated with fly ashes as a result of postoxidation treatment to reduce nitrous oxide emissions. Relatively simple methods exist to remove ammonia from fly ash before use, and fly ashes with low ammonia content are available. Fly ashes were also shown to effectively reduce overlying water concentrations of several PAHs. No evidence was seen of the release of the metals cadmium, copper, nickel, or lead from the fly ashes. A preliminary 28-d polychaete bioaccumulation study with one of the high-carbon fly ashes and a reference sediment was also performed. Although preliminary, no evidence was seen of adverse effects to worm growth or lipid content or of accumulation of PAHs or mercury from exposure to the fly ash. These data show fly ashes with high carbon content could represent viable remedial materials for reducing the bioavailability of organic contaminants in sediments.

01 COAL, LIGNITE, AND PEAT↗

Sorption of polar and nonpolar aromatic compounds to two humic acids with varied structural heterogeneity

The major objective of the present study was to evaluate the correlation between structural nature of humic acids (HAs) and sorption affinity of organic compounds with varied polarity. We compared the sorption behavior of three aromatic compounds-nonpolar phenanthrene (PHEN) and 1,2,4,5-tetrachlorobenzene (TeCB) and highly polar 2,4-dichlorophenol (DCP)-to a solid-phase coal humic acid (CHA) and a soil humic acid (SHA) suspended in aqueous solution. The structural nature of HAs was characterized using elemental analysis, ultraviolet absorbance, diffusive reflectance Fourier-transform infrared, and solid-state C-13 nuclear magnetic resonance. The two tested HAs have very different structural properties: CHA consists primarily of poly(methylene)-rich aliphatics with high aromatic content and some COO/N-C=O but low polarity, while SHA consists of young materials of lignin, carbohydrates, and peptides with high polarity. In response to the structural heterogeneity of HAs, sorption of nonpolar and more hydrophobic solutes (PHEN, TeCB) to CHA is much greater than that to SHA because of the predominance of hydrophobic effects; however, disparities in sorption affinity between the two HAs become smaller for polar and less hydrophobic DCP because of the major role played by polar interactions. The influence of pH on the sorption of different solutes to the two HAs was also discussed. The results of the present work highlight the importance of structural heterogeneity of both solutes and HAs in the sorption process.

01 COAL, LIGNITE, AND PEAT↗

Sorption irreversibility of 1,4-dichlorobenzene in two natural organic matter-rich geosorbents

Hysteresis, a frequently observed phenomenon in sorption studies, is inconsistent with the key assumption of sorption reversibility in most fate and bioavailability models. Therefore, a study of the underlying causes of hysteresis is essential. Carbon-radiolabeled 1,4-dichlorobenzene (DCB) isotope tracer exchange was carried out at select points along the isotherms of DCB in a brown coal and a peat soil, holding total DCB concentration constant. Tracer exchange was performed both in the forward (sorption) and reverse (desorption) directions at the bulk sorption points and in the desorption direction at the corresponding bulk desorption points. Bulk DCB isotherms showed concentration-dependent hysteresis. However, tracer reequilibration in all cases was consistent with free exchange between sorbed and aqueous-phase molecules. These results rule out common experimental artifacts and demonstrate that sorption of bulk DCB is truly hysteretic (i.e., irreversible). The differences in rates between bulk and tracer sorption and desorption are consistent with the coupling of bulk DCB diffusion to other processes that retard equilibration, which we assign to matrix swelling or shrinking. Hysteresis is attributed to matrix deformation-specifically, to inelastic expansion and creation of voids accommodating sorbate molecules in the matrix, which leads to enhanced affinity in the desorption step. Comparing the results to previous results for naphthalene in the coal, we find that irreversible effects are similar for DCB and naphthalene in the coal but differ for DCB between the two sorbents. An explanation based on the different physical properties of these sorbents is provided. Solid-phase extraction of equilibrated DCB with Tenax revealed a highly desorption-resistant fraction. While too small to account for the observed hysteresis, this fraction may represent molecules that become trapped as the matrix collapses and simultaneously stiffens during abrupt desorption.

01 COAL, LIGNITE, AND PEAT↗

Partition behavior of polycyclic aromatic hydrocarbons between aged coal tar and water

Coal tar aged in a large-scale, artificial aquifer experiment for five years was subsequently investigated for leaching behavior of polycyclic aromatic hydrocarbons (PAHs). After five years, the initially liquid coal tar had solidified and formed segregated particles with a grain size similar to that of the sandy aquifer material. The composition of the aged coal tar (ACT) with regard to PAHs was remarkably different from that of the original bulk coal tar (BCT), because most of the low-molecular-weight compounds had been depleted. Equilibrium aqueous-phase concentrations of 17 PAHs leaching from the aquifer material containing the ACT were measured from consecutive equilibration steps at increasing temperatures of between 25 and 100 {sup o}C using accelerated solvent extraction. The results showed 2-to 5,000-fold lower concentrations than those from BCT, indicating dramatic changes of dissolution behavior of PAHs from coal tar after the five-year aging period. Predictions based on Raoult's law with the subcooled liquid solubilities substantially overestimated the equilibrium aqueous-phase concentrations of the PAHs from ACT, whereas the estimations were reasonable if the solid solubilities were employed instead. The enthalpies of phase transfer from ACT to water were determined based on the van't Hoff equation. The resulting values agreed with the dissolution enthalpies of pure solid rather than subcooled liquid PAHs.

01 COAL, LIGNITE, AND PEAT↗

Factors affecting water strider (Hemiptera: Gerridae) mercury concentrations in lotic systems

Water striders (Hemiptera: Gerridae) have been considered as a potential sentinel for mercury (Hg) contamination of freshwater ecosystems, yet little is known about factors that control Hg concentrations in this invertebrate. Striders were collected from 80 streams and rivers in New Brunswick, Canada, in August and September of 2004 through 2007 to assess the influence of factors such as diet, water chemistry, and proximity to point sources on Hg concentrations in this organism. Higher than average Hg concentrations were observed in the southwest and Grand Lake regions of the province, the latter being the location of a coal-fired power plant that is a source of Hg (similar to 100 kg annually), with elevated Hg concentrations in the lichen Old Man's Beard (Usnea spp.) in its immediate vicinity. Across all streams, pH and total organic carbon of water were relatively weak predictors of strider Hg concentrations. Female striders that were larger in body size than males had significantly lower Hg concentrations within sites, suggestive of growth dilution. There was no relationship between percent aquatic carbon in the diet and Hg concentrations in striders. For those striders feeding solely on terrestrial carbon, Hg concentrations were higher in animals occupying a higher trophic level. Mercury concentrations were highly variable in striders collected monthly over two growing seasons, suggesting short-term changes in Hg availability. These measurements highlight the importance of considering both deposition and postdepositional processes in assessing Hg bioaccumulation in this species.

01 COAL, LIGNITE, AND PEAT↗

Effect of activated carbon on microbial bioavailability of phenanthrene in soils

Bioavailability is a governing factor that controls the rate of biological degradation of hydrophobic organic contaminants in soil. Among the solid phases that can adsorb hydrophobic organic contaminants in soil, black carbon (BC) exerts a particularly significant effect on phase distribution. However, knowledge on the effect of BC on the microbial availability of polycyclic aromatic hydrocarbons in soil is still limited. In the present study, the effect of a coal-derived activated carbon on the bioavailability of phenanthrene (PHE) during its degradation by Mycobacterium vanbaalenii PYR-1 was measured in three soils. The freely dissolved concentration of PHE was concurrently determined in soil solutions using disposable polydimethylsiloxane fibers. The results showed that PHE mineralization was significantly inhibited after addition of activated carbon in all test soils. After 216 h, only 5.20, 5.83, and 6.85% of PHE was degraded in the 0.5% BC-amended soils initially containing organic carbon at 0.23, 2.1, and 7.1%, respectively. Significant correlation was found between PHE degradability and freely dissolved concentration, suggesting that BC affected PHE bioavailability by decreasing chemical activity. The effect of activated carbon in the amended soils was attributed to its enhancement of soil surface areas and pore volumes. Results from the present study clearly highlighted the importance of BC for influencing the microbial availability of polycyclic aromatic hydrocarbons in soils.

01 COAL, LIGNITE, AND PEAT↗