Search NASA⌕ Search

SEARCH · Search NASA

Results for “Model Form”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

The accretional heating of the terrestrial planets - A review

Accretional heating in forming planets results from the transfer of kinetic energy of objects striking the proto-planet surface. By accounting for all energy transfer for every cratering event it is theoretically possible to determine the thermal state of newly-formed planets. Various models of the thermodynamics of planetary formation are presented, ranging from the simple to the complex. Few definite conclusions can be drawn from the theoretical models, except that larger terrestrial planets were melted by their formation, cores being formed during formation. Mars may have been extensively heated, core formation in that case being contemporaneous with accretion. Mercury was unlikely to have been subject to much bombardment by planetesimals from other zones, and its core may not have its origin in accretional heat. The moon may have been completely or slightly melted, depending on the nature of the late formation of the earth and Venus.

Ransford, G. A.↗

A vorticity dynamics based model for the turbulent dissipation: Model development and validation

A new model dissipation rate equation is proposed based on the dynamic equation of the mean-square vorticity fluctuation for large Reynolds number turbulence. The advantage of working with the vorticity fluctuation equation is that the physical meanings of the terms in this equation are more clear than those in the dissipation rate equation. Hence, the model development based on the vorticity fluctuation equation is more straightforward. The resulting form of the model equation is consistent with the spectral energy cascade analysis introduced by Lumley. The proposed model dissipation rate equation is numerically well behaved and can be applied to any level of turbulence modeling. It is applied to a realizable eddy viscosity model. Flows that are examined include: rotating homogeneous shear flows; free shear flows; a channel flow and flat plate boundary layers with and without pressure gradients; and backward facing step separated flows. In most cases, the present model predictions show considerable improvement over the standard kappa-epsilon model.

Shih, Tsan-Hsing↗

Establishment of redox conditions during planetary collisions as an origin of chondrites

Collisions between a 'cometlike' body (mixtures of chondritic materials and ice) and a slightly differentiated body were proposed for shock origin of ordinary chondrites. In this model, chondrules were formed with shock melting, and matrices were formed both by fracturing of materials and by recondensation of evaporated materials. This model can explain different redox conditions of chondrite formations by ice evaporation. Although this model was originally proposed for ordinary chondrites, we assume here that the model can be extended to chondrite formation in general. In this paper, redox conditions during chondrite formation by collisions will be discussed in the light of phase diagrams for solid-vapor equilibria.

Tsuchiyama, A.↗

Kinetics of the BrO + NO2 Association Reaction. Temperature and Pressure Dependence in the Falloff Regime

A laser flash photolysis-long path absorption technique has been employed to study the kinetics of the reaction BrO + NO2 + M yields (k1) products as a function of temperature (248-346 K), pressure (16-800 torr), and buffer gas identity (N2,CF4) The reaction is found to be in the falloff regime between third and second-order over the entire range of conditions investigated This is the first study where temperature-dependent measurements of k1(P,T) have been reported at pressures greater than 12 torr; hence, our results help constrain choices of k1(P,T) for use in models of lower stratospheric BrO(x) chemistry. Approximate falloff parameters in a convenient form for atmospheric modeling are derived.

Thron, R. P.↗

A Proposed Model for Protein Crystal Nucleation and Growth

How does one take a molecule, strongly asymmetric in both shape and charge distribution, and assemble it into a crystal? We propose a model for the nucleation and crystal growth process for tetragonal lysozyme, based upon fluorescence, light, neutron, and X-ray scattering data, size exclusion chromatography experiments, dialysis kinetics, AFM, and modeling of growth rate data, from this and other laboratories. The first species formed is postulated to be a 'head to side' dimer. Through repeating associations involving the same intermolecular interactions this grows to a 4(sub 3) helix structure, that in turn serves as the basic unit for nucleation and subsequent crystal growth. High salt attenuates surface charges while promoting hydrophobic interactions. Symmetry facilitates subsequent helix-helix self-association. Assembly stability is enhanced when a four helix structure is obtained, with each bound to two neighbors. Only two unique interactions are required. The first are those for helix formation, where the dominant interaction is the intermolecular bridging anion. The second is the anti-parallel side-by-side helix-helix interaction, guided by alternating pairs of symmetry related salt bridges along each side. At this stage all eight unique positions of the P4(sub3)2(sub 1),2(sub 1) unit cell are filled. The process is one of a) attenuating the most strongly interacting groups, such that b) the molecules begin to self-associate in defined patterns, so that c) symmetry is obtained, which d) propagates as a growing crystal. Simple and conceptually obvious in hindsight, this tells much about what we are empirically doing when we crystallize macromolecules. By adjusting the growth parameters we are empirically balancing the intermolecular interactions, preferentially attenuating the dominant strong (for lysozyme the charged groups) while strengthening the lesser strong (hydrophobic) interactions. In the general case for proteins the lack of a singularly defined association pathway may lead to formation of multiple species, i.e., amorphous precipitation. Weak interactions, such as hydrogen bonds, are promiscuous, serving to strengthen rather than define specific interactions. Participation in an interaction sequesters that surface from subsequent interactions, and we expect the strongest bonds to form first. This model, its basis, how it fits into the currently understood osmotic second virial coefficient approach to crystallization, and what it suggests will be discussed.

Pusey, Marc↗

Full Life-Cycle Defect Management Assessment: Initial Inspection Data Collection Results and Research Questions for Further Study

It is often the case in software projects that when schedule and budget resources are limited, the Verification and Validation (V&V) activities suffer. Fewer V&V activities can be afforded and moreover, short-term challenges can result in V&V activities being scaled back or dropped altogether. As a result, too often the default solution is to save activities for improving software quality until too late in the life-cycle, relying on late-term code inspections followed by thorough testing activities to reduce defect counts to acceptable levels. As many project managers realize, however, this is a resource-intensive way of achieving the required quality for software. The Full Life-cycle Defect Management Assessment Initiative, funded by NASA s Office of Safety and Mission Assurance under the Software Assurance Research Program, aims to address these problems by: Improving the effectiveness of early life-cycle V&V activities to make their benefits more attractive to team leads. Specifically, we focus on software inspection, a proven method that can be applied to any software work product, long before executable code has been developed; Better communicating this effectiveness to software development teams, along with suggestions for parameters to improve in the future to increase effectiveness; Analyzing the impact of early life-cycle V&V on the effectiveness and cost required for late life-cycle V&V activities, such as testing, in order to make the tradeoffs more apparent. This white paper reports on an initial milestone in this work, the development of a preliminary model of inspection effectiveness across multiple NASA Centers. This model contributes toward reaching our project goals by: Allowing an examination of inspection parameters, across different types of projects and different work products, for an analysis of factors that impact defect detection effectiveness. Allowing a comparison of this NASA-specific model to existing recommendations in the literature regarding how to plan effective inspections. Forming a baseline model which can be extended to incorporate factors describing: the numbers and types of defects that are missed by inspections; how such defects flow downstream through software development phases; how effectively they can be caught by testing activities in the late stages of development. The model has been implemented in a prototype web-enabled decision-support tool which allows developers to enter their inspection data and receive feedback based on a comparison against the model. The tool also allows users to access reusable materials (such as checklists) from projects included in the baseline. Both the tool itself and the model underlying it will continue to be extended throughout the remainder of this initiative. As results of analyzing inspection effectiveness for defect containment are determined, they can be shared via the tool and also via updates to existing training courses on metrics and software inspections. Moreover, the tool will help satisfy key CMMI requirements for the NASA Centers, as it will enable NASA to take a global view across peer review results for various types of projects to identify systemic problems. This analysis can result in continuous improvements to the approach to verification.

Shull, Forrest↗

NASA Earth: Synthetic Spectranomics - Deep Learning of Surface 3-D Geometry, Chemistry, and Hyperspectra to Inform Next-generation Land Models

Machine and deep learning (ML/DL) have transformed our approach to Earth observation and system modeling (EOSM), unifying both in view of ML/DL models as a form of data assimilation (DA). Trained on diverse Earth observation records, detailed physical models, or hybrids of both in physics-informed machine learning, ML/DL may improve upon existing Earth system model (ESM) formulations while creating entirely new classes of models. One important application of deep learning is observation synthesis, allowing ESM developers to prepare for the increased spatial, temporal, and spectral/polar resolution of proposed future observing systems. This may involve the retrospective application of learning algorithms to existing observational records, with or without physical radiative transfer models, to co-inform mission planning and ESM development while providing a degree of data continuity for new missions.

Adam Erickson↗

The Longitudinal Stability of Flying Boats as Determined by Tests of Models in the NACA Tank II : Effect of Variations in Form of Hull on Longitudinal Stability

Data taken from tests at constant speed to establish trim limits of stability, tests at accelerated speeds to determine stable limits of center of gravity shift, and tests at decelerated speeds to obtain landing characteristics of several model hull forms were used to establish hull design effect on longitudinal stability of porpoising. Results show a reduction of dead rise angle as being the only investigated factor reducing low trim limit. Various methods of reducing afterbody interference increased upper trim limit

Olson, Roland E.↗

Exploration of an Adaptive Routine for Battery Modeling

The purpose of this document is to explore the use of adaptive routines in battery modeling. The adaptive routines consist of real-time state estimators combined with battery parameter model components that are adjusted in real-time as battery data becomes available. Several aspects are explored. It is shown that model parameter identification is possible for simple battery models using available input/output data measurements. The online system identification used is recursive least squares. Model identification may be combined with a state observer such as the extended Kalman filter or the unscented Kalman filter to form an adaptive model combined with state estimation. However, such a combination is found to be problematic due to uncertainty, observability and stability issues. This paper is organized as follows. Section 1 introduces adaptive routines and possible roles they play in battery modeling. In Section 2 real-time parameter identification is described with results based on battery data. Section 3 reviews various state estimators and results using a simple battery model. In Section 4 parameter identification and state estimation are combined to form an adaptive routine. Finally, in Section 5 conclusions are drawn and future work is suggested.

Adaptive↗

Unified Model of Current-Limiting Grid-Forming Inverters for Large-Signal Analysis

Grid-forming (GFM) inverters can hardly withstand any overloading. As such, GFM inverters need a current limiter in their control system to avoid hardware damage during overloading or grid disturbances. When the current limiter is engaged for inverter protection, however, it dynamically changes the inverter output impedance, which can significantly affect the system behavior against large disturbances. For example, when the current limiter curtails the output power, the primary controller of the GFM inverter-which generates the voltage and angle reference-is prone to losing synchronization with the grid. This can cause large-signal instability in the network. This paper presents a unified GFM current-limiter model to gain a deeper understanding of the impact of the GFM inverter current limiting on large-signal instability and other system behaviors. The unified model captures several well-known current limiters for GFM inverters, and it reveals their large-signal equivalence characterized by the limiter angle. We use the unified model to present in-depth insights into the driving forces that cause large-signal instability in GFM inverter-driven grids. Further, this paper illustrates that the unified model can be used as a tool for assessing the system-level impacts of various GFM current-limiter designs during grid disturbances. Using numerical, analytical, electromagnetic transient models, and a hardware setup, the validity of the unified model is evaluated.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Electromagnetic form factors of nucleons in the extended vector meson dominance model

The extended vector meson dominance model, which allows one to describe the electromagnetic form factors of nucleons obeying the asymptotic quark counting rule prescriptions and contains the minimal number of free parameters, is presented. We obtain a reasonable fit of form factors over the experimentally available spacelike region of momentum transfer and reasonable results in the timelike region.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

FILAMENTARY CONDENSATIONS IN A YOUNG CLUSTER

New models are presented for star-forming condensations in clusters. In each model, the condensation mass increases linearly with radius on small scales, and more rapidly on large scales, as in 'thermal-nonthermal' models. Spherical condensations with this structure form protostars which match the initial mass function if their infall is subject to equally likely stopping. However, such spherical models do not match the filamentary nature of cluster gas, and they are too extended to form protostars having high mass and short spacing. Two hybrid models are presented, which are spherical on small scales and filamentary on large scales. In and around clusters, cores embedded in linear filaments match the elongation of cluster gas, and the central concentration of low-mass stars. In cluster centers, condensations require a low volume-filling factor to produce massive stars with short spacing. These may have stellate shape, where cores are nodes of filamentary networks, as seen in some simulations of colliding flows and collapsing turbulent clumps. A dense configuration of such stellate condensations may be indistinguishable from a clump forming multiple protostars via filamentary flow paths.

79 ASTRONOMY AND ASTROPHYSICS↗

High Time Resolution Modelled and Measured New Particle Formation Rates During the 2023 Pittsburgh, PA Campaign

Particle size distributions are used to calculate nucleation rates during new particle formation (NPF). However, the low time resolution and poor sensitivity of instruments deployed to observe particle size distributions can lead to inaccurate estimates of nucleation rates. We calculated nucleation rates in Pittsburgh, PA from particle size distributions measured with the new high time resolution Condensation Particle Counters For Atmospheric Rapid Measurements (CPC FARM) and from gas precursor concentrations measured with a chemical ionization mass spectrometer. The CPC FARM nucleation rates were calculated by examining the appearance rate of particles in the smallest size bin at 1.6 nm. The nucleation rate of 1.6 nm determined every second resulted in positive and negative rates, indicating the influence of inhomogeneous mixing and advection of precursor gases and clusters. These effects are not currently considered when estimating nucleation rates from measurements. The nucleation rates from the CPC FARM were compared to the nucleation rates determined from a transient acid‐base reaction model using measured sulfuric acid concentration, strong base concentrations, and CPC detection efficiencies. The transient form of the model allowed the advection of heterogeneously mixed precursors to influence the nucleation rate. Good agreement between particle and gas‐based nucleation rates is observed during sulfuric acid‐driven NPF events. This study demonstrates that high time resolution measurements of short‐lived and rapidly formed particles are needed to accurately capture nucleation rates, which are likely influenced by advection of nucleation precursors and clusters in heterogeneous environments such as urban areas.

Cheng, D. [Carnegie Mellon Univ., Pittsburgh, PA (↗

Manifold learning for coarse-graining atomistic simulations: Application to amorphous solids

In this work, we introduce a generalized machine learning framework to probabilistically parameterize upper-scale models in the form of nonlinear PDEs consistent with a continuum theory, based on coarse-grained atomistic simulation data of mechanical deformation and flow processes. The proposed framework utilizes a hypothesized coarse-graining methodology with manifold learning and surrogate-based optimization techniques. Coarse-grained high-dimensional data describing quantities of interest of the multiscale models are projected onto a nonlinear manifold whose geometric and topological structure is exploited for measuring behavioral discrepancies in the form of manifold distances. A surrogate model is constructed using Gaussian process regression to identify a mapping between stochastic parameters and distances. Derivative-free optimization is employed to adaptively identify a unique set of parameters of the upper-scale model capable of rapidly reproducing the system's behavior while maintaining consistency with coarse-grained atomic-level simulations. The proposed method is applied to learn the parameters of the shear transformation zone (STZ) theory of plasticity that describes plastic deformation in amorphous solids as well as coarse-graining parameters needed to translate between atomistic and continuum representations. We show that the methodology is able to successfully link coarse-grained microscale simulations to macroscale observables and achieve a high-level of parity between the models across scales.

36 MATERIALS SCIENCE↗

Electron scattering in the Δ{sub 1} model of the conduction band of germanium single crystals

Electron scattering in the possible Δ{sub 1} models of the conduction band in germanium crystals formed by hydrostatic or uniaxial pressure is investigated. On the basis of the theory of anisotropic scattering, the temperature dependences of the anisotropy parameter of the relaxation times and electron mobility for these models under conditions of scattering at impurity ions, as well as at acoustic and intervalley phonons are obtained. Analysis of the temperature dependences indicates that, in the temperature range of 77–300 K, intervalley scattering becomes substantial. Only for the Δ{sub 1} model formed by uniaxial pressure along the crystallographic direction [100], the electron scattering at intervalley phonons, which correspond to the g transitions, is minor with respect to scattering at acoustic phonons (the intravalley scattering) and impurity ions.

36 MATERIALS SCIENCE↗

Ruthenium supported on silicate and aluminosilicate mesoporous materials applied to selective sugar hydrogenation: Xylose to xylitol

A series of ruthenium-based catalysts supported on a set of silicate and aluminosilicate mesoporous molecular sieves was synthesized and tested in xylose hydrogenation. The materials were characterized in terms of morphology, textural properties, acidity, as well as ruthenium loading, dispersion, and oxidation state. In general, the aluminosilicates-based catalysts displayed a higher activity compared to their respective silicate supports, which can be ascribed to a higher Ru content and dispersion, enhanced by a higher acidity. The most active synthesized catalyst (Ru/Al-MCM-4) displayed an improved performance compared to a commercial Ru/C catalyst due to a better xylitol selectivity. Two modelling approaches were implemented to describe the kinetic rate. The first model was based on the hypothesis that xylose molecules and hydrogen are adsorbed in different active sites on the catalyst surface, while the second model supposes the formation of an intermediate on the catalyst surface that reacts to form xylitol. Both models gave a very good description of the experimental data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On the linkage between the k –5/3 spectral and k –7/3 cospectral scaling in high-Reynolds number turbulent boundary layers

Connections between the “–5/3” spectral and “–7/3” cospectral scaling exponents characterizing the inertial subranges of the wall-normal energy spectrum and the turbulent momentum flux cospectrum are explored in the equilibrium layer of high-Reynolds number turbulent boundary layers. Previous laboratory experiments and field measurements featured here in the atmospheric boundary layer show that the “–7/3” scaling in the momentum flux cospectrum F uw (k) commences at lower wavenumbers (around kz = 3) than the “–5/3” scaling in the wall-normal energy spectrum E ww (k) (around kz = 6), where k is the streamwise wavenumber and z is the distance from the surface. A satisfactory explanation as to why F uw (k) attains its “–7/3” inertial subrange scaling earlier than E ww (k) in wavenumber space remains elusive. A cospectral budget (CSB) model subject to several simplifications and closure schemes offers one viewpoint. In its simplest form, the CSB model assumes a balance at all k between the production term and a Rotta-like pressure decorrelation term with a prescribed wavenumber-dependent relaxation time scale. It predicts the “–7/3” scaling for F uw (k) from the “–5/3” scaling in E ww (k), thereby recovering earlier results derived from dimensional considerations. A finite flux transfer term was previously proposed to explain anomalous deviations from the “–7/3” cospectral scaling in the inertial subrange using a simplified spectral diffusion closure. However, this explanation is not compatible with an earlier commencement of the “–7/3” scaling in F uw (k). An alternative explanation that does not require a finite flux transfer is explored here. By linking the relaxation time scale in the slow-component of the Rotta model to the turbulent kinetic energy (TKE) spectrum, the earlier onset of the “–7/3” scaling in Fuw(k) is recovered without attainment of a “–5/3” scaling in E ww (k). In conclusion, the early onset of the “–7/3” scaling at smaller k is related to a slower than k–5/3 decay in the TKE spectrum at the crossover from production to inertial scales.

58 GEOSCIENCES↗

A scattering function of star polymers including excluded volume effects

In this work we present a new model for the form factor of a star polymer consisting of self-avoiding branches. This new model incorporates excluded volume effects and is derived from the two point correlation function for a star polymer.. We compare this model to small angle neutron scattering (SANS) measurements from polystyrene (PS) stars immersed in a good solvent, tetrahydrofuran (THF). It is shown that this model provides a good description of the scattering signature originating from the excluded volume effect and it explicitly elucidates the connection between the global conformation of a star polymer and the local stiffness of its constituent branch.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗