Search NASA⌕ Search

SEARCH · Search NASA

Results for “Model initialization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

On a study of the /Delta T/c and C/asterisk/ integrals for fracture analysis under non-steady creep

Applications of a vector quantity, path-independent integral which has an energy interpretation to the characterization of crack-tip fields in the range from fast to slow crack propagation are examined. The crack tip characterization parameter is defined in terms of a conservation integral for an area around the crack tip in a two-dimensional cracked body. The actual physical interpretation of the parameter is shown to be the difference in crack lengths displayed by two identical bodies which have equal load histories. A steady-state value is obtained for the parameter for cases of steady-state creep and is shown to be related to the standard path-independent integral for macroscopic self-similar crack growth under mode I conditions. A finite element model is developed for viscoplastic material models, using an initial strain approach with steps in a size employed in tangent stiffness methods.

Stonesifer, R. B.↗

Navigation of the Space Shuttle

Navigational systems and operations for the Space Shuttle are described. All navigational instrumentation is controlled from within the pressurized main cabin. Measurements of the state vector and the attitude are made with an inertial measurement unit (IMU), which uses data initialized at the moment of take-off. Orbital location is calculated in approximations using the initial propulsion conditions, models of the gravity field, and aerodynamic drag forces. Updates are periodically received from ground tracking stations. IMU continues attitude information, and additional references are made with an automated startracker device. Information can also be gathered by optical alignment, and future systems will include radar tracking in an approach mode. Deorbit is accompanied by IMU altitude measurements as well as calculations of altitude based on drag measurements. Barometric measurements begin at about 80,000 ft altitude. Signals are received from TACAN beginning at 145,000 ft, and the microwave scanning beam landing system is started at 20,000 ft. Various radionavigation systems are also employed in all flight phases.

Edwards, A., Jr.↗

Altitude transitions in energy climbs

The aircraft energy-climb trajectory for configurations with a sharp transonic drag rise is well known to possess two branches in the altitude/Mach-number plane. Transition in altitude between the two branches occurs instantaneously, a 'corner' in the minimum-time solution obtained with the energy-state model. If the initial and final values of altitude do not lie on the energy-climb trajectory, then additional jumps (crude approximations to dives and zooms) are required at the initial and terminal points. With a singular-perturbation approach, a 'boundary-layer' correction is obtained for each altitude jump, the transonic jump being a so-called 'internal' boundary layer, different in character from the initial and terminal layers. The determination of this internal boundary layer is examined and some computational results for an example presented.

Weston, A. R.↗

Computer simulation of auroral kilometric radiation

An investigation is carried out of the linear amplification and nonlinear saturation of electromagnetic waves associated with two components of electrons consisting of a cold Maxwellian background and a weakly relativistic population of electrons possessing a loss-cone distribution. The goal is to understand the mechanism responsible for the production of auroral kilometric radiation (AKR). A relativistic 1-2/2 dimensional electromagnetic particle simulation code is used in studying an initial value problem modeling the AKR source region. The simulation makes it possible to follow the growth of all modes of radiation, including the ordinary mode (O-mode), slow extraordinary mode (Z-mode), whistler mode and fast extraordinary mode (X-mode), past the point of saturation.

Wagner, J. S.↗

A multifrequency study of star formation in the blue compact dwarf galaxy IZw 36

Radio, near IR, optical, and UV observations of I Zw 36 = Mrk 209 = Haro 29 are reported. The H I distribution shows a core-halo structure, the core containing half of the mass and showing systematic motions; the halo is diffuse and contains several H I clumps. The visible star formation region is associated with the core but is shifted slightly with respect to the H I peak column density; and the virial mass is 5 to 7 times the H I mass. Star formation models with an initial mass function of slope 1.5 (the Salpeter value being 1.35) and a burst age or duration of a few million years fit well the optical spectrophotometric measurements. The data also suggest that the column density of molecular hydrogen in I Zw 36 is 6 + or - 3 times that of the neutral hydrogen, about the right amount to account for the virial mass.

Viallefond, F.↗

Coronal Transients and Their Interplanetary Effects

The role of coronal mass ejections in the context of solar-terrestrial physics is examined. Some of the necessary background material on flares and geomagnetic storms, on interplanetary shock waves, and on coronal mass ejections is described. One of the modern tools available for approaching these questions - theoretical models for the initiation and propagation of transient phenomenon in the solar corona is described. All of this material was extensively reviewed in the recent literature, and the coverage of it is both selective and somewhat abbreviated. The second of the tools - a new generation of coronagraph observation of mass ejections and complementary set of solar and interplanetary observations suitable for correlative studies, is described. Important problems to be solved in answering these questions and some suggested strategies for approaching these problems will be discussed.

Source record↗

Calculated stormtime variations in plasmaspheric thermal ion composition

Model calculations describing stormtime variations in the earth's dayside plasmasphere are used to examine variations in ion composition. The model storm is initiated by high-latitude thermospheric heating that generates meridional winds that carry neutral species, momentum, and energy equatorward. The thermosphere acts on the plasmasphere through collisional transfer of momentum and through chemical reactions between neutral species and ions. Over latitudes near the region of thermospheric heating, the thermosphere-plasmasphere coupling processes cause enhancement in the density of oxygen ions while protons are being lost. Meanwhile, densities of oxygen ions and protons near the equator are increasing together, almost in phase. The largest enhancements in ion density develop at latitudes near 45 deg invariant for both oxygen and hydrogen.

Miller, N. J.↗

Level of effort

The generation of a planar model of the ground test experiment structure is examined. This was done by adapting an in-house modal analysis code (Gimbalflex) to allow placement of sensors and actuators at certain locations on the structure. The next step in the development of this model was to adapt if for use with the control pole placement algorithm. The uncontrollable rigid body mode was removed from the model. This uncontrollable mode was due to the pointing of the gimbal. Control system design for the planar model was also initiated. A digital controller was planned utilizing the Control Pole Placement technique. The existence of rate of state feedback was assumed. Once this controller and other control algorithms were developed, it became necessary to conduct speed tests. A study was then made of additional hardware/software necessary to meet the speed requirement.

Source record↗

The impact of Seasat-A scatterometer data on the numerical prediction of the Queen Elizabeth II storm

The development of the Queen Elizabeth II storm from 1200 UT on September 9, 1978, to 0000 UT on September 11, 1978, is forecast with a limited-area, fine resolution (100 km) numerical weather prediction model. Forecasts from initial conditions that include and exclude Seasat scatterometer surface winds are performed. When the Seasat winds are allowed to influence the upper levels of the atmosphere, a large positive impact is found.

Duffy, D. G.↗

High-temperature constitutive modeling

Thermomechanical service conditions for high-temperature levels, thermal transients, and mechanical loads severe enough to cause measurable inelastic deformation are studied. Structural analysis in support of the design of high-temperature components depends strongly on accurate mathematical representations of the nonlinear, hereditary, inelastic behavior of structural alloys at high temperature, particularly in the relatively small strain range. Progress is discussed in the following areas: multiaxial experimentation to provide a basis for high-temperature multiaxial constitutive relationships; nonisothermal testing and theoretical development toward a complete thermomechanically path dependent formulation of viscoplasticity; and development of viscoplastic constitutive model accounting for initial anisotropy.

Robinson, D. N.↗

Rotorcraft handling-qualities design criteria development

Joint NASA/Army efforts at the Ames Research Center to develop rotorcraft handling-qualities design criteria began in earnest in 1975. Notable results were the UH-1H VSTOLAND variable stability helicopter, the VFA-2 camera-and-terrain-board simulator visual system, and the generic helicopter real-time mathematical model, ARMCOP. An initial series of handling-qualities studies was conducted to assess the effects of rotor design parameters, interaxis coupling, and various levels of stability and control augmentation. The ability to conduct in-flight handling-qualities research was enhanced by the development of the NASA/Army CH-47 variable-stability helicopter. Research programs conducted using this vehicle include vertical-response investigations, hover augmentation systems, and the effects of control-force characteristics. The handling-qualities data base was judged to be sufficient to allow an update of the military helicopter handling-qualities specification, MIL-H-8501. These efforts, including not only the in-house experimental work but also contracted research and collaborative programs performed under the auspices of various international agreements. The report concludes by reviewing the topics that are currently most in need of work, and the plans for addressing these topics.

Aiken, Edwin W.↗

Lagged average predictions in a predictability experiment

Lagged average predictions are examined here within the context of an idealized predictability experiment. Lagged predictions contribute to making better forecasts than the forecasts obtained from using only the latest initial state. Analytic models suggest that lagged predictions contribute the greatest amount when the error growth rates are small. Little dependence upon the magnitude of the intial error is found if the growth rates remain constant. It is also shown how lagged average forecasts can be used to predict the error. Discriminating forecasts made only when the error is predicted to be small are shown to have much better than average skill.

Roads, John O.↗

Mesoscale spiral vortex embedded within a Lake Michigan snow squall band - High resolution satellite observations and numerical model simulations

It is known that Great Lakes snow squall convection occurs in a variety of different modes depending on various factors such as air-water temperature contrast, boundary-layer wind shear, and geostrophic wind direction. An exceptional and often neglected source of data for mesoscale cloud studies is the ultrahigh resolution multispectral data produced by Landsat satellites. On October 19, 1972, a clearly defined spiral vortex was noted in a Landsat-1 image near the southern end of Lake Michigan during an exceptionally early cold air outbreak over a still very warm lake. In a numerical simulation using a three-dimensional Eulerian hydrostatic primitive equation mesoscale model with an initially uniform wind field, a definite analog to the observed vortex was generated. This suggests that intense surface heating can be a principal cause in the development of a low-level mesoscale vortex.

Lyons, Walter A.↗

Preliminary observations of the effect of solutal convection on crystal morphology

Studies to examine the effect of solutal convection on crystal morphology using sucrose as a model system were initiated. Aspect ratios, defined as the width of the 100-plane-oriented face over the width of the 001-plane-oriented face, were determined for oriented crystals which were grown with either the 001-oriented or the 100-oriented face perpendicular to the convective flow. The dependence of the crystal morphology on orientation is much greater for crystals grown with one face occluded than for crystals grown suspended in solution. Many factors appear to interact in a complex fashion to influence crystal morphology.

Broom, M. Beth H.↗

Angular momentum loss in low-mass stars

The wind models discussed by Mestel (1984) are used here to formulate a general expression for the rate of angular momentum loss by magnetic stellar winds as a function of magnetic field configuration, rotation rate, and stellar model properties. The sensitivity of the rotation velocity to the various wind model parameters, the initial angular momenta, and the time dependence of the angular velocity for each mass is shown. The theoretical results are compared with observational ones, and it is found that the existence of very rapidly rotating stars in young clusters implies that low-mass stars are formed with a large spread of angular momentum. The high efficiency of angular momentum loss through magnetic stellar winds causes the rotation velocity to become less dependent on initial angular momentum J0 with time; by 300 million yur, the rotation velocity becomes independent of J0. This results in a decrease with time in the spread of rotation velocities as a function of stellar mass in young clusters.

Kawaler, Steven D.↗

A model of auroral potential structures based on Dynamics Explorer plasma data

Dynamics Explorer 1 hot plasma data are used to investigate three major features of the mid-altitude auroral electron distribution -- the hole, the bump (at large pitch angles), and the loss cone. The results of a computer simulation show that these features can be approximately reproduced by a model involving an initial plasma sheet electron distribution and two potential drop regions that are widely separated in altitude. The observed distributions could not be reproduced, even qualitatively, by any of a wide range of distributed potential drops involving parallel electric fields at the point of observation.

Burch, J. L.↗

Water and the thermal evolution of carbonaceous chondrite parent bodies

Two hypotheses are proposed for the aqueous alteration of carbonaceous chondrites within their parent bodies, in which respectively the alteration occurs (1) throughout the parent body interior, or (2) in a postaccretional surface regolith; both models assume an initially homogeneous mixture of ice and rock that is heated through the decay of Al-26. Water is seen to exert a powerful influence on chondrite evolution through its role of thermal buffer, permitting substitution of a low temperature aqueous alteration for high temperature recrystallization. It is quantitatively demonstrated that liquid water may be introduced by either hydrothermal circulation, vapor diffusion from below, or venting due to fracture.

Grimm, Robert E.↗

Magnetically striped relativistic magnetohydrodynamic winds - The Crab Nebula revisited

Previous relativistic pair plasma MHD wind models of the Crab Nebula indicate that the ratio of the wind's Poynting flux to particle kinetic energy flux must be very small. However, many current theories of pulsar magnetospheres and pulsar observations suggest that the spin-down luminosity should be primarily electromagnetic in origin and outward transport. For an oblique rotator, the asymptotic wind magnetic field near the rotational equator should consist of stripes of alternating toroidal field. A simple model of an initially high-sigma striped MHD wind is developed which describes the reconnection annihilation of the opposite polarity stripes as the wind flows radially outward. The initially dominant Poynting flux is converted into particle thermal and directed kinetic energy well within the inner standing shock which terminates the superfast wind.

Coroniti, F. V.↗