Search NASA⌕ Search

SEARCH · Search NASA

Results for “Multiphysics modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Modeling the Effect of Evaporative Flux and Colloidal Aggregation on Crud Deposition

During the last few years lot of research has been conducted to investigate and predict the Crud deposition in PWRs. One of the common findings of various experimental and computational studies is that thickness or amount of crud deposits is directly related to evaporative flux maps. Evaporation driven deposition profile on the surfaces takes different forms, i.e. from ring to disk shapes during initial stages and in the form of porous to impervious continuous layers covering the hot fuel surface at the later stages. The amount and thickness of these deposits although are directly related to evaporative flux, the relationship is much complex and can be dependent upon several other factors. A popular problem relating evaporative flux to particulate deposition has been well studied in the form of drying of sessile colloidal drops. It was proposed that, this phenomenon is due to a geometrical constraint: the free surface, constrained by a pinned contact line squeezes the fluid outwards to compensate for evaporative losses and thereby transporting particles to the contact line. Later on a quantitative relationship between evaporative flux and deposition rate was proposed and validated by the same group, which showed power-law relationship. Deposition studies conducted with controlled concentration of particles with subcooled nucleate boiling also showed a power-law relationship rather than a simpler linear relationship whereas physics of evaporation would tend to concentrate particles at linear rate. In a typical subcooled nucleate boiling system, bubble growth and departure time is of the order 1-2 ms, measured experimentally. Diffusion time constant for dilute spherical metallic colloids such as crud particulates, generally present as particulate in process piping, range from 0.0025-2.5 sec in water for a size range 0.1-1.0 μm. Colloidal behavioral characteristics during the growth of bubbles can be computed with escape time constant at collision, which is dependent on effective Hamaker constant. For minimum effective Hamaker constant of Hematite is -2.5 kT and diffusion time constant τ = 0.0025 sec, escape time constant is computed as Kramer rule, τexp[A/kT] magnitude is 0.03 sec or 30 ms. This clearly indicates that evaporation will cause particles to come together and they cannot escape at a fast enough rate which would lead them to form agglomerates. Therefore both effects of evaporative flux in conjunction with the agglomeration kinetics must be considered for modeling the crud deposition if the evaporative flux is known. In this paper, we propose a phenomenological model of colloidal transport and aggregation with evaporative flux. The dynamic of particles interactions while drying of sessile colloidal drops is developed by coupling general transport equation with Smoluchowshki Coagulation equation. Crud deposition on the nuclear fuel has been a serious problem with severe consequences in nuclear power plants. In several studies it has been consistently reported that crud deposition is directly related to evaporative flux on the nuclear fuel surfaces. However, it has not been established how to quantify the deposition rates of crud type particulates if the evaporative flux is known. This complex multiphysics problem is similar to coffee-ring effect, where the governing physics is understood more clearly. In this work, a simplified geometry is used to model the effects of evaporative flux acting at a boundary on the colloidal concentration. The effect of this condition on change in concentration is shown numerically. Further, agglomeration is suspected to play a significant role in high evaporative flux such as bubble nucleation. The coagulation kinetics is modeled using uniform particle distribution and the effective total concentration of colloids including original particles and agglomerates is studied. Once this model is validated with a simple separate effect experiments, it can be integrated to large scale PWR models of evaluating evaporative flux and chemistry models developed by Electrical Power Research Institute (EPRI). (authors)

42 ENGINEERING↗

Simulation Apps Bring Us Closer to Mars

My work with mathematical modeling and computer simulations began in earnest in 1987 when I signed on with the National Aeronautics and Space Administration, better known as NASA. At the time I was developing computer simulations to support the design of carbon dioxide (CO2) removal systems for the International Space Station (ISS) life support system. CO2 is a human metabolic waste, produced at a rate of a kilogram per day per crewmember. CO2 must be removed from the crew cabin, as it will quickly become detrimental to crew health. The systems used to remove CO2 are typically based on sorption processes, which include complex interactions of heat transfer, mass transfer, and gas flow through porous media. At this time, there were no commercial options for solving a set of coupled mathematical models such as partial differential equations (PDEs); you either force-fit the physics into a thermal analysis package or wrote your own code, complete with discretization, meshing, and solution algorithms. Unfortunately, coding CO2 removal processes from scratch did not allow an appropriate focus on the challenging yet crucial task of understanding and capturing the underlying physics via appropriate mathematical models. Configuration control was often simply ignored due to tight schedules, resulting in a code that would be quicker for a second party to rewrite than modify. In the early 2000s, I decided to move CO2 removal simulations to a platform with built-in meshing, solvers, and postprocessing capabilities, and that could solve user-defined multiphysics PDEs. The program chosen to meet these needs was COMSOL Multiphysics®. Along with freeing the engineer to focus on the underlying physics, a degree of configuration control was automatically achieved via a consistent user interface, thus allowing COMSOL users to share computer models. My team has developed simulations that are already providing a valuable debugging capability for the ISS CO2 removal system, and will provide guidance in upgrades to that system.

Knox, Jim↗

Release on the Virtual Test Bed of an MSRE thermal hydraulics model

The nuclear industry is taking leaps in innovations with companies seeking a sustainable energy future through advanced nuclear reactors. The \gls{DOE}’s \gls{neams} program seeks to substantiate and bolster the deployment of advanced reactors through flexible multifidelity, multiphysics simulations of advanced nuclear reactors. Applications like SAM for one-dimensional systems thermal-hydraulics, and Pronghorn for multidimensional coarse mesh thermal-hydraulics, are geared to support innovations in industry by facilitating design, optimization, and licensing of advanced nuclear reactors. Coupling systems thermal-hydraulics and computational fluid dynamics codes can be difficult as the pressure coupling converges slowly; however, it is important to obtain the desired accuracy in each part of the primary loop. The authors of this model created an \gls{odc}~\cite{Mau23} approach to coupling SAM and Pronghorn. Leveraging this coupling technique, a \gls{msre} model was developed and released to the \gls{neams}/\gls{nric} \gls{vtb}. The \gls{msre} was chosen to be modeled because of the wealth of experimental data available and because of the strong physics coupling between the core and primary circuit \cite{doi:10.13182/NT8-2-118}. This document contextualizes the history of the \gls{msre}, describes the thermal hydraulics models used, and detail the implementation of multidimensional thermal-hydraulics and system codes based on the \gls{odc} method~\cite{Penn} for the \gls{msre} model. Finally, this document presents how other modelers could apply the SAM-Pronghorn \gls{odc} for other advanced reactor models. Current item is the set of slides for ANS Winter 23. The release of the model and the ANS summary have already been approved

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Release on the Virtual Test Bed of an MSRE thermal hydraulics model

The nuclear industry is taking leaps in innovations with companies seeking a sustainable energy future through advanced nuclear reactors. The \gls{DOE}’s \gls{neams} program seeks to substantiate and bolster the deployment of advanced reactors through flexible multifidelity, multiphysics simulations of advanced nuclear reactors. Applications like SAM for one-dimensional systems thermal-hydraulics, and Pronghorn for multidimensional coarse mesh thermal-hydraulics, are geared to support innovations in industry by facilitating design, optimization, and licensing of advanced nuclear reactors. Coupling systems thermal-hydraulics and computational fluid dynamics codes can be difficult as the pressure coupling converges slowly; however, it is important to obtain the desired accuracy in each part of the primary loop. The authors of this model created an \gls{odc}~\cite{Mau23} approach to coupling SAM and Pronghorn. Leveraging this coupling technique, a \gls{msre} model was developed and released to the \gls{neams}/\gls{nric} \gls{vtb}. The \gls{msre} was chosen to be modeled because of the wealth of experimental data available and because of the strong physics coupling between the core and primary circuit \cite{doi:10.13182/NT8-2-118}. This document contextualizes the history of the \gls{msre}, describes the thermal hydraulics models used, and detail the implementation of multidimensional thermal-hydraulics and system codes based on the \gls{odc} method~\cite{Penn} for the \gls{msre} model. Finally, this document presents how other modelers could apply the SAM-Pronghorn \gls{odc} for other advanced reactor models.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Coupled Monte Carlo and thermal-fluid modeling of high temperature gas reactors using Cardinal

Cardinal is an open-source application that couples OpenMC Monte Carlo transport and NekRS computa-tional fluid dynamics to the Multiphysics Object-Oriented Simulation Environment (MOOSE), closing neutronics and thermal-fluid gaps in conducting high-resolution multiscale and multiphysics analyses of nuclear systems. Here, we provide an introduction to Cardinal's software design, data mapping, and multi -physics coupling strategy to highlight our approach to overcoming common challenges in multiphysics simulation. We then describe an application of Cardinal to prismatic High Temperature Gas Reactors (HTGRs) with various combinations of NekRS, OpenMC, BISON, and THM. A high-resolution coupling of NekRS, OpenMC, and BISON provides a reference solution at the unit cell level and shows excellent agree-ment with a lower-resolution coupling of THM, OpenMC, and BISON. A full core coupling of THM, OpenMC, and BISON resolving the three-dimensional conjugate heat transfer and sub-pin power distri-bution then provides detailed predictions of HTGR temperatures and the fission distribution.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Threadsafe Dynamic Neighbor Lists for Monte Carlo Ray Tracing

Monte Carlo (MC) transport codes offer high-fidelity modeling of particle transport physics, but their high computational cost makes them impractical for many applications. For some applications such as multiphysics and depletion that use finely discretized geometries, a large portion of this computational cost is attributable to ray tracing. Neighbor lists are a well-known method for accelerating ray-tracing calculations in a MC code, but despite their prevalence, little work has been published on the details of their implementation. The fine details can have a significant impact on performance, particularly when using shared-memory parallelism. This paper addresses these details of implementation with a discussion of different neighbor list schemes and their impact on software runtime. Performance tests were run by using OpenMC on a pin-cell problem discretized with up to 200 axial regions. The results demonstrate that switching from surface-based to cell-based neighbor lists leads to a 10 faster calculation rate for the most fine discretization. Finally, using a threadsafe shared-memory data structure results in a 20% faster calculation rate versus simple threadprivate neighbor lists. Results here show that a data structure that is contiguous in memory improves performance by only 1% to 2% over noncontiguous linked lists.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Metal Hydrides for High-Temperature Power Generation

Metal hydrides can be utilized for hydrogen storage and for thermal energy storage (TES) applications. By using TES with solar technologies, heat can be stored from sun energy to be used later which enables continuous power generation. We are developing a TES technology based on a dual-bed metal hydride system, which has a high-temperature (HT) metal hydride operating reversibly at 600-800°C to generate heat as well as a low-temperature (LT) hydride near room temperature that is used for hydrogen storage during sun hours until there is a need to produce electricity, such as during night time, a cloudy day, or during peak hours. We proceeded from selecting a high-energy density, low-cost HT-hydride based on performance characterization on gram size samples, to scale-up to kilogram quantities and design, fabrication and testing of a 1.5kWh, 200kWh/m 3 bench-scale TES prototype based on a HT-bed of titanium hydride and a hydrogen gas storage instead of a LT-hydride. COMSOL Multiphysics was used to make performance predictions for cylindrical hydride beds with varying diameters and thermal conductivities. Based on experimental and modeling results, a bench-scale prototype was designed and fabricated and we successfully showed feasibility to meet or exceed all performance targets.

08 HYDROGEN↗

Advancement of Functional Expansion Tallies Capabilities in Serpent 2

The need for accident tolerant fuels (ATFs) became self-evident after the series of unfortunate nuclear events at Fukushima Daiichi in 2011. Restarting the Transient Reactor Test Facility (TREAT) at INL is one component in this concerted effort to establish the ATF development and testing program under the United States Department of Energy. Prior to the closure of TREAT in 1994, each experiment required multiple low-power calibration tests before and after each run. Since then, computing advancements have set computer-based modeling and simulation (M and S) as the preferred calibration method. The anticipated savings are both temporal and monetary. MAMMOTH, a collection of M and S tools built from the finite element-based MOOSE Framework, has been established to support the designed experiments intended for TREAT. This collection of tools includes: 1) Rattlesnake, a striking diffusion-based neutronics code, 2) BISON, an advanced materials and fuels performance code, and 3) RELAP-7, a powerful thermal-hydraulics solver. Each is capable of independently performing its function accurately and effectively; unified, they create a powerful multiphysics reactor core M and S application. One unfortunate weakness in this configuration lies in the unique geometry and design of TREAT's core. Although simple to model, this poses a challenge to the diffusion solver in Rattlesnake. One alternative is to replace Rattlesnake with Serpent, a fully-fledged Monte Carlo (MC) neutronics code. Coincidentally, Rattlesnake calculations are frequently validated against Serpent simulations.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Benchmarking of Software and Methods for Use in Transient Multidimensional Fuel Performance with Spatial Reactor Kinetics

The key physics involved in accurate prediction of reactor-fuel-element behavior includes neutron transport and thermal hydraulics. The thermal hydraulic feedback mechanism is primarily provided through cross sections to the neutron transport that are temperature and density dependent. Historically, this coupling was primarily seen only in reactor simulators, which are well suited to model the reactor core, giving only a coarse treatment to individual fuel pins as well as simple models for thermal distribution calculations. This poor resolution on the primary coupling mechanisms can lead to conservatisms that should be removed to improve fuel design and performance. This work seeks to address the resolution of space-time-dependent neutron kinetics with thermal feedback within the fuel pin scale in the multiphysics framework. The specific application of this new capability is transient performance analysis of space-time-dependent temperature distribution of fuel elements. The coupling between the neutron transport and the thermal feedback is extremely important in this highly coupled problem, primarily applicable to reactivity-initiated-accidents (RIAs) and loss-of-coolant-accidents (LOCAs). The capability developed will include the coupling of the time-dependent neutron transport with the time-dependent thermal diffusion capability. An improvement in resolution and coupling is proposed by developing neutron transport models that are internally coupled with high fidelity within fuel pin thermal calculations in a multiphysics framework. Good agreement is shown with benchmarks and problems from the literature of RIAs and LOCAs for the tools used.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Sensitivity analysis of VERA-CS and FRAPCON coupling in a multiphysics environment

A demonstration and description of the LOCA Toolkit for US light water reactors (LOTUS) is presented. Through LOTUS, the core simulator VERA-CS developed by CASL is coupled with the fuel performance code FRAPCON. The coupling is performed with consistent uncertainty propagation with all model inconsistencies being well-documented. Monte Carlo sampling is performed on a single 17 × 17 fuel assembly with a three cycle depletion case. Both uncertainty quantification (UQ) and sensitivity analysis (SA) are used at multiple states within the simulation to elucidate the behavior of minimum departure from nucleate boiling ratio (MDNBR), maximum fuel centerline temperature (MFCT), and gap conductance at peak power (GCPP). The SA metrics used are the Pearson correlation coefficient, Sobol sensitivity indices, and the density-based, delta moment independent measures. Results for MDNBR show consistency among all SA measures, as well for all states throughout the fuel lifecycle. MFCT results contain consistent rankings between SA measures, but show differences throughout the lifecycle. GCPP exhibits predominantly linear relations at low and high burnup, but highly nonlinear relations at intermediate burnup due to abrupt shifts between models. As a result, such behavior is largely undetectable to traditional regression or variance-based methods and demonstrates the utility of density-based methods.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Wind Tunnel Model of the Turner-Fairbank Highway Research Center Aerodynamics Laboratory [TFHRC Project Report]

The computational fluid dynamics (CFD) and computational structural mechanics (CSM) focus areas at Argonne’s Transportation Research and Analysis Computing Center (TRACC) initiated a project to support and compliment the experimental programs at the Turner-Fairbank Highway Research Center (TFHRC) with high performance computing based analysis capabilities in August 2010. The project was established with a new interagency agreement between the Department of Energy and the Department of Transportation to provide collaborative research, development, and benchmarking of advanced three-dimensional computational mechanics analysis methods to the aerodynamics and hydraulics laboratories at TFHRC for a period of five years, beginning in October 2010. The analysis methods employ well benchmarked and supported commercial computational mechanics software. Computational mechanics encompasses the areas of Computational Fluid Dynamics (CFD), Computational Wind Engineering (CWE), Computational Structural Mechanics (CSM), and Computational Multiphysics Mechanics (CMM) applied in Fluid-Structure Interaction (FSI) problems. This report documents one of the tasks in this project. In this task, a detailed CFD model of the wind tunnel laboratory at TFHRC was built and tested to provide a means to assess the air flow uniformity provided by the tunnel to the test zone and assess room geometry effects. Considerable effort went into the construction and testing of the model and various submodels, such as the screens in the wind tunnel. The model is available for use in further studies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

MuSIKAL: Multiphysics Simulations and Knowledge Discovery through AI/ML Technologies

Under the MuSiKAL project, we developed a framework for a coastal digital twin (DT) platform capable of integrating diverse data resources, configuring multiscale model simulations, performing SciML‐accelerated predictions, with applications primarily driven by storm surge and heavily rainfall events impacting the Gulf Coast of the U.S.

54 ENVIRONMENTAL SCIENCES↗

High-fidelity multiphysics simulation of BWR assembly with coupled TORT-TD/CTF

This paper describes the application of the coupled codes TORT-TD and CTF to the pin-by-pin modeling of a BWR fuel assembly with thermal-hydraulic feedback. TORT-TD, developed at GRS, is a time-dependent three dimensional discrete ordinates code. CTF is the PSU's improved version of the subchannel code COBRA-TF, which uses a two-fluid, three-field model to represent two-phase flow with entrained droplets, and is commonly applied to evaluate LWR safety margins. The coupled codes system TORT-TD/CTF, already applied to several PWR cases involving MOX, was adapted from PWR to BWR applications. The purpose of the research described in this paper is to verify the coupling for modeling two-phase flow at the pin cell level. Using an ATRIUM-10 assembly, the system's steady-state capabilities were tested on two cases: one without control blade insertion and another with partially inserted blades. The influence of the neutron absorber on local axial and radial parameters is presented. The description of an inlet flow reduction transient is an example for the time-dependent capability of the coupled system. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

User-Oriented Improvements in the MOOSE framework in support of Multiphysics Simulation

The MOOSE Framework is a foundational capability used by NEAMS to create over 15 different simulation tools for advanced nuclear reactors. Due to this ubiquity, improvements to the framework in support of modeling and simulation goals are critical to the program. These improvements can take many forms including optimization, improved user experience, streamlined APIs, parallelism, and new capability. The work transcribed in the report was in direct support of the simulation tools and is already deployed or will be deployed in the coming months. The capabilities implemented were, in the same order as this report, chainable execution objects or executors, support for transfers between applications at the same level in a coupling scheme, support for boundary/subdomain restricted transfers, support for transfers between applications with different coordinate or unit systems, support for MOOSE applications in the NEAMS workbench, deployment of MOOSE application of the INL HPC OnDemand platform, addition of a triangular meshing library in libMesh and increased support of face variables.

97 MATHEMATICS AND COMPUTING↗

Challenging Common Assumptions of Thick-Wall Chamber Dynamics in Inertial Fusion Systems Using MOOSE-based Multiphysics Simulations

As an increasing number of companies look toward commercial Inertial Fusion Energy (IFE) designs, there is a pressing need to understand the physics of thick-wall chamber gas dynamics. The thick liquid wall approach implements a renewable wall to mitigate the fusion target emissions, thereby reducing the radiation damage rate and significantly extending the lifetime of chamber structures, leading to increased plant availability and reduced waste streams in comparison to dry wall chamber designs. It is necessary, however, to assess the critical performance and safety aspects of these systems. For example, it is crucial to predict (1) where the mass ablated from the liquid walls will vent, which determines the placement of condensing surfaces; (2) debris propagation up the beam lines, which provides essential information for design and protection requirements; (3) peak pressures and impulse on chamber walls, which affect chamber structural design; and (4) momentum transfer to the liquid jets, which constrains the shape and positioning of the jets. In turn, the chamber design and its liquid walls affect shielding requirements, material activation, and tritium fuel cycle. Currently available simulation tools, however, are unable to accurately capture key thick-wall chamber dynamics. Significant assumptions are often made to simplify the system and reduce computational cost and modeling capability needs, but the impact of these assumptions on simulation predictions has not been evaluated. For example, no three-dimensional simulations can be found in the open literature to evaluate gas venting and momentum transfer to the jets with simulations using two-dimensional domains to represent complex three-dimensional geometries. Moreover, limited studies have been dedicated to jet breakup due to both turbulence and neutron heating, and no studies have been found that evaluate how jet breakup can impact shock-jet interaction. Furthermore, effects of radiative heat transfer have rarely been included for the hydrodynamic phase of shock propagation, and integration of proper equations of state in shock dynamics codes has been mostly exploratory. In this study, we use the flexible, high-fidelity Multiphysics Object-Oriented Simulation Environment (MOOSE) to model these complex phenomena and inform design and safety studies. Capabilities to model thick-wall chamber gas dynamics are being developed, and the impact of the assumptions listed above (i.e., two-dimensional vs three-dimensional, absence of jet breakout, no radiative heat transfer, and ideal gas behavior) are being quantified.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

RESOLVING THE ELECTROCHEMICAL EQUATIONS OF A SOLID OXIDE FUEL CELL FOR USE IN TRANSIENT SIMULATION AND INTEGRATION INTO CYBER-PHYSICAL SYSTEMS

A major challenge with complex cyber-physical systems stems from long model computational time that creates a mismatch between the model system and the physical system. The numerical modeling of solid oxide fuel cells (SOFCs) presents particular challenges due to the highly coupled nature of the underlying equations and the multiphysics needed to fully resolve their behavior during a transient event. To this end current approaches revolve around splitting the computational efforts into resolving temperature effects and resolving electrochemical effects. Current methods employed for the transient simulation of an SOFC for implementation in the Hybrid Performance (HyPer) facility cyberphysical plant at the National Energy Technology Laboratory reveal a distinct need for accelerated results with a high degree of stability. To this aim, an investigation into the computational time for the code reveals that the underlying electrochemical algorithm takes an order of magnitude more time than its thermal counterpart and has a tendency to vary in terms of iteration time and as such a rework of the underlying system is proposed. The primary method for accelerated electrochemical algorithm solutions is to employ higher order root finding recipes for the resolution of the highly coupled electrochemical equations. This is done with the intention to reduce the overall number of subiterations necessary for resolving voltage, current density, and species concentration, properties of the fuel cell that are all directly coupled and require nested iterative approaches. The overall objective of this approach is an order of magnitude reduction in calculation time without sacrificing stability and increasing accuracy. Specific approaches involve using both bounded and unbounded techniques, such as the False Position method and the Secant method (or if applicable Newton-Raphson) respectively, the drawbacks being slower convergence for False Position and instability for the Secant or Newton-Raphson methods. Current preliminary results on simplified versions of the parent functions involved for electrochemical calculations indicate a reduction in computational steps by a factor of two for the secant method and a factor of three for Newton-Raphson. When implemented into new modified electrochemical algorithms, the results indicate a possible order of magnitude reduction in calculation time.

Arias, Jesus↗

Simple and efficient relaxation methods for interfaces separating compressible fluids, cavitating flows and shocks in multiphase mixtures

Numerical approximation of the five-equation two-phase flow of Kapila et al. [A.K. Kapila, R. Menikoff, J.B. Bdzil, S.F. Son, D.S. Stewart, Two-phase modeling of deflagration-to-detonation transition in granular materials: reduced equations, Physics of Fluids 13(10) (2001) 3002-3024] is examined. This model has shown excellent capabilities for the numerical resolution of interfaces separating compressible fluids as well as wave propagation in compressible mixtures [A. Murrone, H. Guillard, A five equation reduced model for compressible two phase flow problems, Journal of Computational Physics 202(2) (2005) 664-698; R. Abgrall, V. Perrier, Asymptotic expansion of a multiscale numerical scheme for compressible multiphase flows, SIAM Journal of Multiscale and Modeling and Simulation (5) (2006) 84-115; F. Petitpas, E. Franquet, R. Saurel, O. Le Metayer, A relaxation-projection method for compressible flows. Part II. The artificial heat exchange for multiphase shocks, Journal of Computational Physics 225(2) (2007) 2214-2248]. However, its numerical approximation poses some serious difficulties. Among them, the non-monotonic behavior of the sound speed causes inaccuracies in wave's transmission across interfaces. Moreover, volume fraction variation across acoustic waves results in difficulties for the Riemann problem resolution, and in particular for the derivation of approximate solvers. Volume fraction positivity in the presence of shocks or strong expansion waves is another issue resulting in lack of robustness. To circumvent these difficulties, the pressure equilibrium assumption is relaxed and a pressure non-equilibrium model is developed. It results in a single velocity, non-conservative hyperbolic model with two energy equations involving relaxation terms. It fulfills the equation of state and energy conservation on both sides of interfaces and guarantees correct transmission of shocks across them. This formulation considerably simplifies numerical resolution. Following a strategy developed previously for another flow model [R. Saurel, R. Abgrall, A multiphase Godunov method for multifluid and multiphase flows, Journal of Computational Physics 150 (1999) 425-467], the hyperbolic part is first solved without relaxation terms with a simple, fast and robust algorithm, valid for unstructured meshes. Second, stiff relaxation terms are solved with a Newton method that also guarantees positivity and robustness. The algorithm and model are compared to exact solutions of the Euler equations as well as solutions of the five-equation model under extreme flow conditions, for interface computation and cavitating flows involving dynamics appearance of interfaces. In order to deal with correct dynamic of shock waves propagating through multiphase mixtures, the artificial heat exchange method of Petitpas et al. [F. Petitpas, E. Franquet, R. Saurel, O. Le Metayer, A relaxation-projection method for compressible flows. Part II. The artificial heat exchange for multiphase shocks, Journal of Computational Physics 225(2) (2007) 2214-2248] is adapted to the present formulation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗