Search NASA⌕ Search

SEARCH · Search NASA

Results for “Nonlinear reduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Coupling of damped and growing modes in unstable shear flow

Analysis of the saturation of the Kelvin-Helmholtz instability is undertaken to determine the extent to which the conjugate linearly stable mode plays a role. For a piecewise-continuous mean flow profile with constant shear in a fixed layer, it is shown that the stable mode is nonlinearly excited, providing an injection-scale sink of the fluctuation energy similar to what has been found for gyroradius-scale drift-wave turbulence. Quantitative evaluation of the contribution of the stable mode to the energy balance at the onset of saturation shows that nonlinear energy transfer to the stable mode is as significant as energy transfer to small scales in balancing energy injected into the spectrum by the instability. The effect of the stable mode on momentum transport is quantified by expressing the Reynolds stress in terms of stable and unstable mode amplitudes at saturation, from which it is found that the stable mode can produce a sizable reduction in the momentum flux.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Parametric Finite Element Analysis of Naturally Corroded Steel Specimens Using 3D Surface Laser Scans

Corrosion is considered a uniform thickness reduction design guideline of the maritime industry. However, additionally, the corroded and irregular morphology of the surface affects the steel's load-bearing capacity and its impact on the strength and elongation behaviour of the steel is not yet fully understood. These effects on the local behaviour of steel structures under tensile loading were investigated with tensile tests on naturally corroded steel specimens and nonlinear finite element simulations including the corroded surface morphology with a uniform surface idealation. The models also include the deformed specimen shape. The developed approach led to highly accurate parametric finite element models predicting the ultimate tensile strength and longitudinal position of fracture. The results show that all included aspects are essential for accurate simulations, while solely the maximum available surface resolution was not as decisive.

corrosion↗

Flight flutter testing technology at Grumman

Analysis techniques used in the automated telemetry station (ATS) for on line data reduction are encompassed in a broad range of software programs. Concepts that form the basis for the algorithms used are mathematically described. The control the user has in interfacing with various on line programs is discussed. The various programs are applied to an analysis of flight data which includes unimodal and bimodal response signals excited via a swept frequency shaker and/or random aerodynamic forces. A nonlinear response error modeling analysis approach is described. Preliminary results in the analysis of a hard spring nonlinear resonant system are also included.

Perangelo, H. J.↗

Reduced order models for nonlinear aerodynamics

Reduced order models are needed for reliable, efficient and accurate prediction of aerodynamic forces to analyze fluid structure interaction problems in turbomachinery, including propfans. Here, a finite difference, time marching Navier-Stokes code is validated for unsteady airfoil motion by comparing results with those from classical potential flow. The Navier-Stokes code is then analyzed for calculation of primitive and exact estimates of eigenvalues and eigenvectors associated with fluid-airfoil interaction. A variational formulation for the Euler equations and Navier-Stokes equations will be the basis for reduction of order through an eigenvector transformation.

Mahajan, Aparajit J.↗

Electrocatalytic Reduction of CO 2 to CO over Ag(110) and Cu(211) Modeled by Grand-Canonical Density Functional Theory

We report the results of modeling CO 2 reduction (CO 2 R) to CO over Ag(110) and Cu(211) surfaces at different applied potentials using grand-canonical density functional theory (GC-DFT), a method specifically designed to accurately model electrochemical systems. In addition to demonstrating GC-DFT’s ability to accurately model electrochemical processes, we also compare it with the computational hydrogen electrode (CHE) approach. GC-DFT predicts that the geometries of these reacting systems strongly depend on the applied potential and the Helmholtz free energies vary nonlinearly with the applied potential, which contradicts a central assumption of the CHE approach. The CHE approach neglects the change in the number of electrons on the electrode surface at different applied potentials, which reduces its accuracy as the potential changes from the potential of zero charge. Our results further demonstrate that the grand free energies of the reaction intermediates not only depend on the value of the applied potential but also on the metal surface type, adsorption site, and adsorbate. GC-DFT’s ability to predict the effect of the applied potential on adsorbate geometry enables it to evaluate different possible reaction mechanisms at different applied potentials. For instance, GC-DFT predicts that the first step of CO2R likely switches from proton-coupled electron transfer to sequential electron transfer and then proton transfer at more reducing potentials, a result that cannot be determined by the CHE because it assumes that all electron transfers are coupled to proton transfers and neglects the effect of the applied potential on the adsorbate geometry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Probing lithium mobility at a solid electrolyte surface

Abstract Solid-state electrolytes overcome many challenges of present-day lithium ion batteries, such as safety hazards and dendrite formation 1,2 . However, detailed understanding of the involved lithium dynamics is missing due to a lack of in operando measurements with chemical and interfacial specificity. Here we investigate a prototypical solid-state electrolyte using linear and nonlinear extreme-ultraviolet spectroscopies. Leveraging the surface sensitivity of extreme-ultraviolet-second-harmonic-generation spectroscopy, we obtained a direct spectral signature of surface lithium ions, showing a distinct blueshift relative to bulk absorption spectra. First-principles simulations attributed the shift to transitions from the lithium 1 s state to hybridized Li- s /Ti- d orbitals at the surface. Our calculations further suggest a reduction in lithium interfacial mobility due to suppressed low-frequency rattling modes, which is the fundamental origin of the large interfacial resistance in this material. Our findings pave the way for new optimization strategies to develop these electrochemical devices via interfacial engineering of lithium ions.

25 ENERGY STORAGE↗

Exact solitary solution of Schamel equation in plasmas with negative ions

A theoretical investigation is carried out for understanding the properties of the solitary solution in plasmas with negative ions. Schamel equation for a plasma consisting of electron, positive ions and negative ions has been derived by using the reductive perturbation method. The effects of negative ions and the density on the properties of the solitary solution is discussed. We make use of the extended mapping method and auxiliary equation to obtain the solution of Schamel equation. This solution includes the Jacobi elliptic function solutions, hyperbolic function solutions, rational solutions, and periodic wave solutions. Furthermore, we show that the incorporate negative ion effects in the nonlinear propagation of ion acoustic waves that are controlled by trapped electrons and the results of the solitary solution in plasmas with negative ions model are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Investigation of UV filaments and their applications

UV laser pulses at 266 nm with 170 ps duration and up to 300 mJ energy create UV filaments. The effects of different beam preparation scenarios on UV filamentation are discussed. Beam preparation by focusing in vacuum and launching into the atmosphere through an aerodynamic window establishes the existence of filaments as self-guided non-diffracting entities. In addition, focusing through the aerodynamic window converts the initial super-Gaussian into a parabolic beam profile at the edge of the nonlinear medium (air). The shock-wave generated by the UV filament is investigated via shadowgraphy techniques. The shock-wave is cylindrically symmetric, leaving a low density channel behind, which is well-sustained for 1 ms, as it propagates outward. This low density channel is a waveguide that can be used for guiding purposes. Applications of UV filaments including guiding, remote sensing, and drag reduction for supersonic aircrafts are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Reduced-order model based feedback control of the Modified Hasegawa-Wakatani model

In this work, the development of model-based feedback control that stabilizes an unstable equilibrium is obtained for the Modified Hasegawa-Wakatani (MHW) equations, a classic model in plasma turbulence. First, a balanced truncation (a model reduction technique that has proven successful in flow control design problems) is applied to obtain a low dimensional model of the linearized MHW equation. Then a model based feedback controller is designed for the reduced order model using linear quadratic regulators (LQR). Finally, a linear quadratic gaussian (LQG) controller, which is more resistant to disturbances is deduced. The controller is applied on the non-reduced, nonlinear MHW equations to stabilize the equilibrium and suppress the transition to drift-wave induced turbulence.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hierarchically Parallelized Constrained Nonlinear Solvers with Automated Substructuring

This paper develops a parallelizable multilevel multiple constrained nonlinear equation solver. The substructuring process is automated to yield appropriately balanced partitioning of each succeeding level. Due to the generality of the procedure,_sequential, as well as partially and fully parallel environments can be handled. This includes both single and multiprocessor assignment per individual partition. Several benchmark examples are presented. These illustrate the robustness of the procedure as well as its capability to yield significant reductions in memory utilization and calculational effort due both to updating and inversion.

Padovan, Joe↗

Multigrid Reduction in Time for Chaotic Dynamical Systems

As CPU clock speeds have stagnated and high performance computers continue to have ever higher core counts, increased parallelism is needed to take advantage of these new architectures. Traditional serial time-marching schemes can be a significant bottleneck, as many types of simulations require large numbers of time-steps which must be computed sequentially. Parallel-in-time schemes, such as the Multigrid Reduction in Time (MGRIT) method, remedy this by parallelizing across time-steps and have shown promising results for parabolic problems. However, chaotic problems have proved more difficult, since chaotic initial value problems (IVPs) are inherently ill-conditioned. MGRIT relies on a hierarchy of successively coarser time-grids to iteratively correct the solution on the finest time-grid, but due to the nature of chaotic systems, small inaccuracies on the coarser levels can be greatly magnified and lead to poor coarse-grid corrections. Here we introduce a modified MGRIT algorithm based on an existing quadratically converging nonlinear extension to the multigrid Full Approximation Scheme (FAS), as well as a novel time-coarsening scheme. Together, these approaches better capture long-term chaotic behavior on coarse-grids and greatly improve convergence of MGRIT for chaotic IVPs. Further, we introduce a novel low-memory variant of the algorithm for solving chaotic PDEs with MGRIT which not only solves the IVP, but also provides estimates for the unstable Lyapunov vectors of the system. Finally, we provide supporting numerical results for the Lorenz system and demonstrate parallel speedup for the chaotic Kuramoto–Sivashinsky PDE over a significantly longer time-domain than in previous works.

97 MATHEMATICS AND COMPUTING↗

Effect of nonisothermal electrons on dressed soliton in ion beam plasma system

Using the reductive perturbation method (RPM) evolution equations, governing the first and second order potentials for ion acoustic wave in an ion beam plasma system with nonisothermal electrons, are derived. Adopting renormalization procedure of Kodama and Taniuti [J. Phys. Soc. Jpn. 45, 298 (1978)] nonsecular dressed soliton solution of these coupled equations is determined. An alternative approach is also used to obtain large amplitude soliton solution, retaining higher order nonlinearities in the expansion of the Sagdeev potential and integrating the resulting energy equation for the system. For small amplitude approximation, this solution reduces to dressed soliton solution obtained for the system using the renormalization in the RPM. Variation of the amplitude (A), velocity ({lambda}), width (W), and the product amplitudexwidth{sup 4} (AW{sup 4}) are numerically studied for the Korteweg-de Vries, dressed and large amplitude soliton for different values of parameters of the beam-plasma system, and results are summarized.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Evidence for a thermally driven charge-density-wave transition in 1T-TaS 2 thin-film devices: Prospects for GHz switching speed

We report on the room-temperature switching of 1T-TaS 2 thin-film charge-density-wave devices, using nanosecond-duration electrical pulsing to construct their time-resolved current–voltage characteristics. The switching action is based upon the nearly commensurate to incommensurate charge-density-wave phase transition in this material, which has a characteristic temperature of 350 K at thermal equilibrium. For sufficiently short pulses, with rise times in the nanosecond range, self-heating of the devices is suppressed, and their current–voltage characteristics are weakly nonlinear and free of hysteresis. This changes as the pulse duration is increased to ~200 ns, where the current develops pronounced hysteresis that evolves nonmonotonically with the pulse duration. By combining the results of our experiments with a numerical analysis of transient heat diffusion in these devices, we clearly reveal the thermal origins of their switching. In spite of this thermal character, our modeling suggests that suitable reduction of the size of these devices should allow their operation at GHz frequencies.

36 MATERIALS SCIENCE↗

Loss Minimization With Optimal Power Dispatch in Multi-Frequency HVac Power Systems

Low-frequency high-voltage ac transmission scheme has recently been proposed as an alternative approach for bulk power transmission. This paper proposes a multi-period optimal power flow (OPF) for a multi-frequency HVac transmission system that interconnects both conventional 50/60-Hz and low-frequency grids using back-to-back converters with a centralized control scheme. The OPF objective is to minimize system losses by determining the optimal dispatch for generators, shunt capacitors, and converters. The OPF constraints include the operational constraints of all HVac grid and converter stations. The resulting mixed-integer nonlinear programing problem is solved using a proposed framework based on the predictor-corrector primal-dual interior-point method. The proposed OPF formulation and solution approach are verified using a multi-frequency HVac transmission system that is modified from the IEEE 57-bus system. Here, the results with the optimal dispatch from the proposed method during a simulated day show a significant loss reduction and an improved voltage regulation compared to those when an arbitrary dispatch is chosen.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Investigations of simulated aircraft flight through thunderstorm outflows

The effects of wind shear on aircraft flying through thunderstorm gust fronts were investigated. A computer program was developed to solve the two dimensional, nonlinear equations of aircraft motion, including wind shear. The procedure described and documented accounts for spatial and temporal variations of the aircraft within the flow regime. Analysis of flight paths and control inputs necessary to maintain specified trajectories for aircraft having characteristics of DC-8, B-747, augmentor wing STOL, and DHC-6 aircraft was recorded. From the analysis an attempt was made to find criteria for reduction of the hazards associated with landing through thunderstorm gust fronts.

Frost, W.↗

Reduction, analysis, and properties of electric current systems in solar active regions

The specific attraction and, in large part, the significance of solar magnetograms lie in the fact that they give the most important data on the electric currents and the nonpotentiality of active regions. Using the vector magnetograms from the Marshall Space Flight Center (MSFC), we employ a unique technique in the area of data analysis for resolving the 180 deg ambiguity in order to calculate the spatial structure of the vertical electric current density. The 180 deg ambiguity is resolved by applying concepts from the nonlinear multivariable optimization theory. The technique is shown to be of particular importance in very nonpotential active regions. The characterization of the vertical electric current density for a set of vector magnetograms using this method then gives the spatial scale, locations, and magnitude of these current systems. The method, which employs an intermediate parametric function which covers the magnetogram and which defines the local `preferred' direction, minimizes a specific functional of the observed transverse magnetic field. The specific functional that is successful is the integral of the square of the vertical current density. We find that the vertical electric current densities have common characteristics for the extended bipolar (beta) (gamma) (delta)-regions studied. The largest current systems have j(sub z)'s which maximizes around 30 mA/sq m and have a linear decreasing distribution to a diameter of 30 Mn.

Gary, G. Allen↗

Effect of Reduced Brace Section on Behavior of SCBF Bracings

Energy dissipation in concentrically braced frames is achieved by successive cycles of inelastic buckling in compression and yielding in tension and force controlled elements, such as beams, columns and connections should remain elastic to ensure the gravity load resistance of the frame. Braces are usually designed for compression which results section areas that are more than required by tension, while due to tension action of brace the connections and other members should be designed for tensile strength of brace element. In chevron braced frames, the beams in bracing frame should possess adequate strength to resist the unbalanced vertical forces due to unequal axial capacity of braces in tension and compression. This result in very big size beams, much stronger than would be required for other brace configurations. In this paper effect of Reduced Brace Section on behavior of displacement control braces, which intend to decrease the difference between tensile and post-buckling strength of braces, is described. Decreasing area of the steel section in a limited length and at a specific location will result in a reduction in tensile yielding capacity of the brace while it's buckling load and post buckling behavior is not affected significantly. Tensile yielding force is related to the reduced area of the brace while its post yielding tensile capacity is also related to the length of the reduced section. Minimum change in buckling and post buckling response was derived from the proposed arrangements of reduced sections. Linear and nonlinear response of the reduced section braces in tension and compression is studied by analytical methods under monotonic and cyclic loading. Braces with reduced section are considered as a type of balanced bracing which results smaller design forces for gusset plates and beams in chevron bracings.

58 GEOSCIENCES↗

Reduction, Analysis, and Properties of Electric Current Systems in Solar Active Regions

The specific attraction and, in large part, the significance of solar vector magnetograms lie in the fact that they give the most important data on the electric currents and the nonpotentiality of active regions. Using the vector magnetograms from the Marshall Space Flight Center (MSFC), we employ a unique technique in the area of data analysis for resolving the 180 degree ambiguity in order to calculate the spatial structure of the vertical electric current density. The 180 degree ambiguity is resolved by applying concepts from the nonlinear multivariable optimization theory. The technique is shown to be of particular importance in very nonpotential active regions. The characterization of the vertical electric current density for a set of vector magnetograms using this method then gives the spatial scale, locations, and magnitude of these current systems. The method, which employs an intermediate parametric function which covers the magnetogram and which defines the local "preferred" direction, minimizes a specific functional of the observed transverse magnetic field. The specific functional that is successful is the integral of the square of the vertical current density. We find that the vertical electric current densities have common characteristics for the extended bipolar beta gamma delta-regions studied. The largest current systems have j(sub z)'s which maximizes around 30 mA per square meter and have a linear decreasing distribution to a diameter of 30 Mm.

Gary, G. Allen↗