Search NASA⌕ Search

SEARCH · Search NASA

Results for “Physical Solar Model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

First VLTI/GRAVITY Observations of HIP 65426 b: Evidence for a Low or Moderate Orbital Eccentricity

Giant exoplanets have been directly imaged over orders of magnitude of orbital separations, prompting theoretical and observational investigations of their formation pathways. In this paper, we present new VLTI/GRAVITY astrometric data of HIP 65426 b, a cold, giant exoplanet which is a particular challenge for most formation theories at a projected separation of 92 au from its primary. Leveraging GRAVITY's astrometric precision, we present an updated eccentricity posterior that disfavors large eccentricities. The eccentricity posterior is still prior dependent, and we extensively interpret and discuss the limits of the posterior constraints presented here. We also perform updated spectral comparisons with self-consistent forward-modeled spectra, finding a best-fit ExoREM model with solar metallicity and C/O = 0.6. An important caveat is that it is difficult to estimate robust errors on these values, which are subject to interpolation errors as well as potentially missing model physics. Taken together, the orbital and atmospheric constraints paint a preliminary picture of formation inconsistent with scattering after disk dispersal. Further work is needed to validate this interpretation. Analysis code used to perform this work is available on GitHub: https://github.com/sblunt/hip65426.

Sarah Blunt↗

Solar Flare Ribbon Fronts. I. Constraining Flare Energy Deposition with IRIS Spectroscopy

Spectral lines formed at lower atmospheric layers show peculiar profiles at the "leading edge" of ribbons during solar flares. In particular, increased absorption of the BBSO/GST He I λ10830 line, as well as broad and centrally reversed profiles in the spectra of the Mg II and C II lines observed by the IRIS satellite, has been reported. In this work, we aim to understand the physical origin of such peculiar IRIS profiles, which seem to be common of many, if not all, flares. To achieve this, we quantify the spectral properties of the IRIS Mg II profiles at the ribbon leading edge during four large flares and perform a detailed comparison with a grid of radiative hydrodynamic models using the RADYN+FP code. We also studied their transition region (TR) counterparts, finding that these ribbon front locations are regions where TR emission and chromospheric evaporation are considerably weaker compared to other parts of the ribbons. Based on our comparison between the IRIS observations and modeling, our interpretation is that there are different heating regimes at play in the leading edge and the main bright part of the ribbons. More specifically, we suggest that bombardment of the chromosphere by more gradual and modest nonthermal electron energy fluxes can qualitatively explain the IRIS observations at the ribbon leading front, while stronger and more impulsive energy fluxes are required to drive chromospheric evaporation and more intense TR emission in the bright ribbon. Our results provide a possible physical origin for the peculiar behavior of the IRIS chromospheric lines in the ribbon leading edge and new constraints for the flare models.

Solar flares↗

Application of similitude principle to the numerical simulation of solar atmospheric dynamics

Numerical simulation has become an essential part of solar physics because the complex nonlinear characteristics of solar phenomena makes analytical solutions difficult to obtain. Realistic simulation of the birth and decay of an active region still is not possible because of the wide range of spatial and time scales that must be considered. Therefore, proper scaling rules must be recognized for the development of appropriate models. In this paper, the similitude principle is applied to develop scaling rules. It is found that these rules are highly dependent on the physical nature of the specific problem under consideration. A set of 'similitude critiques' is presented for some specific physical conditions. Numerical examples of coronal dynamic response and active region dynamics are used to demonstrate these ideas.

Wu, S. T.↗

Advancing Concentrating Solar Thermal Modeling Using System Advisor Model (SAM)

Concentrating solar thermal (CST) technologies play a critical role in enabling dispatchable power and high-temperature industrial heat applications. Accurate and flexible modeling tools are essential for evaluating system performance, guiding technology research and development, and informing investment decisions. The National Laboratory of the Rockies's System Advisor Model (SAM) is a widely used techno-economic simulation platform for CST systems, providing detailed performance and financial modeling capabilities for multiple CST system configurations. SAM integrates physics-based performance models with financial analysis to simulate the behavior of complex energy systems under realistic operating conditions. For CST technologies (including tower, parabolic trough, and linear Fresnel), SAM enables hourly simulations using site-specific weather data that ensure feasible operating conditions and convergence of mass and energy between core system components (i.e., solar field, receiver, thermal energy storage, and power cycle). These capabilities allow researchers and developers to evaluate annual energy production, capacity factors, levelized cost of energy (LCOE), and system dispatch strategies. A key advantage of SAM lies in its flexibility for parametric analysis and large-scale computational studies. Users can vary system design parameters such as heliostat field layout, receiver dimensions, thermal energy storage capacity, power block sizing, and installation cost assumptions to investigate their impact on system performance and financial metrics. When combined with automated scripting through LK, SDKTool, or Python interfaces, SAM enables high-throughput simulation workflows that support sensitivity analysis, technology benchmarking, and optimization studies. These approaches are particularly valuable for next-generation CST concepts, where design spaces are large and system interactions are complex. Another important capability of SAM is its support for dispatch optimization and thermal energy storage modeling, which are central to the value proposition of CST technologies. The ability to simulate integrated storage and flexible power generation allows researchers to explore strategies that maximize grid value, improve capacity utilization, and enhance integration with variable resources such as photovoltaic and wind generation. This poster will present an overview of SAM's thermal system modeling capabilities including concentrating solar. Additionally, we will highlight new feature developments including: 1) implementing Google's OR-Tools optimization platform for faster and more robust dispatch optimization, 2) developing a new power load following controller for modeling behind-the-meter applications, 3) enabling direct modeling of CSP-PV hybrid systems with the inclusion of battery storage, and 4) developing a multi-receiver falling particle Gen3 system model.

14 SOLAR ENERGY↗

CORONAL JETS SIMULATED WITH THE GLOBAL ALFVÉN WAVE SOLAR MODEL

This paper describes a numerical modeling study of coronal jets to understand their effects on the global corona and their contribution to the solar wind. We implement jets into a well-established three-dimensional, two-temperature magnetohydrodynamic (MHD) solar corona model employing Alfvén-wave dissipation to produce a realistic solar-wind background. The jets are produced by positioning a compact magnetic dipole under the solar surface and rotating the boundary plasma around the dipole's magnetic axis. The moving plasma drags the magnetic field lines along with it, ultimately leading to a reconnection-driven jet similar to that described by Pariat et al. We compare line-of-sight synthetic images to multiple jet observations at EUV and X-ray bands, and find very close matches in terms of physical structure, dynamics, and emission. Key contributors to this agreement are the greatly enhanced plasma density and temperature in our jets compared to previous models. These enhancements arise from the comprehensive thermodynamic model that we use and, also, our inclusion of a dense chromosphere at the base of our jet-generating regions. We further find that the large-scale corona is affected significantly by the outwardly propagating torsional Alfvén waves generated by our polar jet, across 40° in latitude and out to 24 R {sub ⊙}. We estimate that polar jets contribute only a few percent to the steady-state solar-wind energy outflow.

79 ASTRONOMY AND ASTROPHYSICS↗

SOLAR CONSTRAINTS ON ASYMMETRIC DARK MATTER

The dark matter content of the universe is likely to be a mixture of matter and antimatter, perhaps comparable to the measured asymmetric mixture of baryons and antibaryons. During the early stages of the universe, the dark matter particles are produced in a process similar to baryogenesis, and dark matter freezeout depends on the dark matter asymmetry and the annihilation cross section (s-wave and p-wave annihilation channels) of particles and antiparticles. In these {eta}-parameterized asymmetric dark matter ({eta}ADM) models, the dark matter particles have an annihilation cross section close to the weak interaction cross section, and a value of dark matter asymmetry {eta} close to the baryon asymmetry {eta}{sub B}. Furthermore, we assume that dark matter scattering of baryons, namely, the spin-independent scattering cross section, is of the same order as the range of values suggested by several theoretical particle physics models used to explain the current unexplained events reported in the DAMA/LIBRA, CoGeNT, and CRESST experiments. Here, we constrain {eta}ADM by investigating the impact of such a type of dark matter on the evolution of the Sun, namely, the flux of solar neutrinos and helioseismology. We find that dark matter particles with a mass smaller than 15 GeV, a spin-independent scattering cross section on baryons of the order of a picobarn, and an {eta}-asymmetry with a value in the interval 10{sup -12}-10{sup -10}, would induce a change in solar neutrino fluxes in disagreement with current neutrino flux measurements. This result is also confirmed by helioseismology data. A natural consequence of this model is suppressed annihilation, thereby reducing the tension between indirect and direct dark matter detection experiments, but the model also allows a greatly enhanced annihilation cross section. All the cosmological {eta}ADM scenarios that we discuss have a relic dark matter density {Omega}h {sup 2} and baryon asymmetry {eta}{sub B} in agreement with the current WMAP measured values, {Omega}{sub DM} h {sup 2} = 0.1109 {+-} 0.0056 and {eta}{sub B} = 0.88 Multiplication-Sign 10{sup -10}.

79 ASTRONOMY AND ASTROPHYSICS↗

Microwave and hard X-ray imaging of a solar flare on 1980 November 5

VLA and SMM hard X ray data on the solar flares of November 5, 1980 are analyzed and compared with data from other sources. The VLA provided measurements at 15 GHz at 10 sec intervals, using left and right circular polarizations with a 0.6 arcsec resolution. The hard X ray imaging spectrometer on the SMM obtained data in six bands from 3.5-30 keV, with 8 x 8 arcsec resolution and 1.5 sec separation. The data were examined for a possible nonthermal source for the microwave component of the emissions detected, the origin of 16-30 keV excess fluxes, the relation between the X ray and microwave sources, the magnetic connection between observed loops, and the physical characteristics of the radiating loop. The data were consistent with a model that assumes fast electrons are accelerated to a single power-law energy distribution and freely stream along the magnetic field. The data also agreed with a thick-target model for solar flare X ray emission.

Hoyng, P.↗

Measurement of the solar neutrino capture rate with gallium metal. III. Results for the 2002-2007 data-taking period

The Russian-American experiment SAGE began to measure the solar neutrino capture rate with a target of gallium metal in December 1989. Measurements have continued with only a few brief interruptions since that time. In this article we present the experimental improvements in SAGE since its last published data summary in December 2001. Assuming the solar neutrino production rate was constant during the period of data collection, combined analysis of 168 extractions through December 2007 gives a capture rate of solar neutrinos with energy more than 233 keV of 65.4{sub -3.0}{sup +3.1} (stat) {sub -2.8}{sup +2.6} (syst) SNU. The weighted average of the results of all three Ga solar neutrino experiments, SAGE, Gallex, and GNO, is now 66.1{+-}3.1 SNU, where statistical and systematic uncertainties have been combined in quadrature. During the recent period of data collection a new test of SAGE was made with a reactor-produced {sup 37}Ar neutrino source. The ratio of observed to calculated rates in this experiment, combined with the measured rates in the three prior {sup 51}Cr neutrino-source experiments with Ga, is 0.87{+-}0.05. A probable explanation for this low result is that the cross section for neutrino capture by the two lowest-lying excited states in {sup 71}Ge has been overestimated. If we assume these cross sections are zero, then the standard solar model including neutrino oscillations predicts a total capture rate in Ga in the range of 63 SNU to 66 SNU with an uncertainty of about 4%, in good agreement with experiment. We derive the current value of the neutrino flux produced in the Sun by the proton-proton fusion reaction to be {phi}{sub pp}{sup {center_dot}}=(6.0{+-}0.8)x10{sup 10}/(cm{sup 2} s), which agrees well with the pp flux predicted by the standard solar model. Finally, we make several tests and show that the data are consistent with the assumption that the solar neutrino production rate is constant in time.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

First-Principles Analysis of Radiative Recombination in Lead-Halide Perovskites

Slow radiative recombination due to a slightly indirect band gap has been proposed to explain the high efficiency of lead-halide perovskite solar cells. In this work, we calculate the radiative recombination rate from first principles for the prototypical lead-halide perovskite, MAPbI 3 (MA=CH 3 NH 3 ). Since the structure is dynamic, with the MA molecule rotating even at room temperature, we determine the momentum mismatch between the band edges as a function of the orientation of the MA molecule. Our results demonstrate that the indirect nature of the band gap suppresses the radiative recombination rate by less than a factor of two, and that the radiative recombination coefficient is as high as in traditional direct-gap semiconductors. Our study provides a rigorous assessment of the radiative recombination mechanisms and their relation to the high efficiency of lead-halide perovskite solar cells, and will provide a sound basis for accurate modeling.

14 SOLAR ENERGY↗

Studying the Impact of Distributed Solar PV on Power Systems Using Integrated Transmission and Distribution Models

Rapid growth of distributed energy resources has prompted increasing interest in integrated Transmission (T) and Distribution (D) modeling. This paper presents the results of a distributed generation from solar photovoltaics (DGPV) impact assessment study that was performed using a synthetic T &D model. The primary objective of the study was to present a new approach for DGPV impact assessment, where along with detailed models of transmission and distribution networks, consumer loads were modeled using the physics of end-use equipment, and DGPV was geographically dispersed and connected to the secondary distribution networks. The study highlights (i) how a lack of DGPV forecasting can increase the Area Control Error (ACE) at the transmission level for high penetration levels; and (ii) how capturing transmission voltage changes using integrated T &D can change simulated distribution voltage profiles and voltage regulator operations between integrated T &D and distribution-only simulations.

14 SOLAR ENERGY↗

Investigating the XENON1T low-energy electronic recoil excess using NEST

The search for dark matter, the missing mass of the Universe, is one of the most active fields of study within particle physics. The XENON1T experiment recently observed a 3.5⁢𝜎 excess potentially consistent with dark matter, or with solar axions. Here, we will use the Noble Element Simulation Technique (NEST) software to simulate the XENON1T detector, reproducing the excess. We utilize different detector efficiency and energy reconstruction models, but they primarily impact sub-keV energies and cannot explain the XENON1T excess. However, using NEST, we can reproduce their excess in multiple, unique ways, most easily via the addition of 31 ± 11 37 Ar decays. Furthermore, this results in new, modified background models, reducing the significance of the excess to ≤2.2⁢𝜎 at least using non-Profile Likelihood Ratio (PLR) methods. This is independent confirmation that the excess is a real effect, but potentially explicable by known physics. Many cross-checks of our 37 Ar hypothesis are presented.

particle dark matter↗

PROPERTIES OF THE DIFFUSE X-RAY BACKGROUND TOWARD MBM20 WITH SUZAKU

We used Suzaku observations of the molecular cloud MBM20 and a low neutral hydrogen column density region nearby to separate and characterize the foreground and background diffuse X-ray emission. A comparison with a previous observation of the same regions with XMM-Newton indicates a significant change in the foreground flux which is attributed to Solar Wind Charge eXchange (SWCX). The data have also been compared with previous results from similar 'shadow' experiments and with a SWCX model to characterize its O VII and O VIII emission.

74 ATOMIC AND MOLECULAR PHYSICS↗

THE CORONAL STRUCTURE OF AB DORADUS

We perform a numerical simulation of the corona of the young, rapidly rotating K0 dwarf AB Doradus using a global magnetohydrodynamic (MHD) model. The model is driven by a surface map of the radial magnetic field constructed using Zeeman-Doppler Imaging. We find that the global structure of the stellar corona is dominated by strong azimuthal tangling of the magnetic field due to the rapid rotation. The MHD solution enables us to calculate realistic Alfven surfaces, and we can therefore estimate the stellar mass loss rate and angular momentum loss rate without making undue theoretical simplifications. We consider three cases, parameterized by the base density of the corona, that span the range of possible solutions for the system. We find that overall the mass and angular momentum loss rates are higher than in the solar case; the mass loss rates are 10-500 times higher, and the angular momentum loss rate can be up to 3 x 10{sup 4} higher than present-day solar values. Our simulations show that this model can be used to constrain the wide parameter space of stellar systems. It also shows that an MHD approach can provide more information about the physical system over the commonly used potential field extrapolation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A BINARY PROGENITOR FOR THE TYPE IIb SUPERNOVA 2011dh IN M51

We perform binary stellar evolutionary calculations following the simultaneous evolution of both stars in the system to study a potential progenitor system for the Type IIb supernova 2011dh. Pre-explosion photometry as well as light-curve modeling has provided constraints on the physical properties of the progenitor system. Here, we present a close binary system (CBS) that is compatible with such constraints. The system is formed by stars of solar composition with 16 M {sub Sun} + 10 M {sub Sun} on a circular orbit with an initial period of 125 days. The primary star ends its evolution as a yellow supergiant with a mass of Almost-Equal-To 4 M {sub Sun }, a final hydrogen content of Almost-Equal-To (3-5) Multiplication-Sign 10{sup -3} M {sub Sun }, and with an effective temperature and luminosity in agreement with the Hubble Space Telescope (HST) pre-explosion observations of SN 2011dh. These results are nearly insensitive to the adopted accretion efficiency factor {beta}. At the time of explosion, the companion star has an effective temperature of 22,000-40,000 K, depending on the value of {beta}, and lies near the zero-age main sequence. Considering the uncertainties in the HST pre-SN photometry, the secondary star is only marginally detectable in the bluest observed band. CBSs, as opposed to single stars, provide a natural frame to explain the properties of SN 2011dh.

79 ASTRONOMY AND ASTROPHYSICS↗

Observational manifestations of black holes in the Horndeski gravity model

The geodesic equations for black hole solutions in the scalar–tensor Horndeski gravity model with non-minimal kinetic coupling have been investigated. The ranges of model parameters admitting the existence of bounded orbits have been determined. Constraints on the model parameters providing agreement of the model with the observational data on the accretion and motion of bodies in the Solar system have been obtained.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A numerical study of the nonlinear thermal stability of solar loops

A time-dependent numerical model is used to investigate the nonlinear thermal stability of static loops of various heights. Simulations show that the instability of a hot state with loop heights of less than about 1000 km is physically significant, with an initially hot atmosphere in low-lying compact loops evolving to an extended atmosphere with temperatures far below 100,000 K. Results also show that high-lying loops are stable to all reasonable perturbations, including those of large initial amplitude and long wavelength. The simulation results suggest that low-lying compact loops should not be common to the sun, and that cool loops with temperatures near 100,000 K must be formed in the cool state initially and cannot evolve from preexisiting loops.

Klimchuk, J. A.↗

The physics of planetesimal formation

Physical processes involved in the planetesimal formation are discussed with special attention given to the nature of aerodynamic interactions between solid bodies and gas in the solar nebula. It is emphasized that the model of planetesimal formation by gravitational instability of a dust layer yields predictions that are simple but almost certainly wrong. It is suggested instead that the formation of planetesimals began with the process of coagulation of grains into larger aggregates, and that gravitational forces became more important than gas drag only after objects as large as many meters in diameter had formed.

Weidenschilling, Stuart J.↗