Search NASA⌕ Search

SEARCH · Search NASA

Results for “Reactor Kinetics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Statistical distributions for transient transport

Here, this paper introduces the use of statistical distributions based on transport differential equations for clear distinction of transport modes within transient kinetic experiments. More specifically, novel techniques are developed for the transient data obtained through the Temporal Analysis of Products (TAP) reactor and are applicable to experiments where pulse response into a gas flow is used. The methodology allows distinguishing between two domains of diffusion transport in heterogeneous catalytic systems, i.e., Knudsen and non-Knudsen diffusion, using statistical fingerprints, and finding the transition domain. Two distribution parameters were obtained that directly result in coefficients that correspond to the concentration and the rate of transport. Using a linear relationship between the rate and concentration coefficients, Knudsen diffusion is revealed when the rate of transport is constant and non-Knudsen diffusion is confirmed when the rate of transport coefficient is a function of the concentration coefficient. As a result, accurate transport information can be extracted from experimental data even in the presence of comprising instrument drift or noise particularly when analyzing higher pressure pulse responses with complex transport. This enables more direct investigation of experiments influenced by gas-phase reactions.

TAP reactor↗

A single-zone zero-dimensional study of HCCI combustion of methanol dehydration products to enable ignition of direct-injected methanol

Methanol is an alternative fuel gaining traction in the maritime sector. Its direct adoption, however, is accompanied by a unique set of technical challenges, such as low cetane number and high latent heat of vaporization. An approach to overcome these challenges is being developed at the US Department of Energy’s Oak Ridge National Laboratory, where onboard generation of dimethyl ether (DME) via catalytic dehydration of methanol can be used to assist in the mixing controlled combustion of direct-injected (DI) methanol. The generated mixture from this dehydration process can be premixed with intake air to condition the cylinder via. homogeneous charge compression ignition (HCCI) for subsequent DI methanol. In this preliminary work, various catalyst or reactor conversion efficiencies were simulated (using bottles) at constant DME and water flow at low load on a single-cylinder marine-variant of a CAT® C18 18 L engine with a 145 mm bore. To substantiate the experimental findings, a zero-dimensional engine model was developed in Cantera using a DME mechanism with 79 species and 658 reactions. Results presented include experimental and simulation heat release rate comparisons, species evolution information, and constant volume ignition delay (ID) for DI methanol with and without background species from HCCI of the premixed products from different reactor efficiencies. The results suggest that thermal effects dominate the DI methanol ignition process, and this work provides a chemical kinetic foundation or guideline for developing future control schemes.

Tyrewala, Daanish [ORNL] (ORCID:0000000208599324)↗

Optimizing Binding Energies of Key Intermediates for CO 2 Hydrogenation to Methanol over Oxide-Supported Copper

Rational optimization of catalytic performance has been one of the major challenges in catalysis. In this paper, we report a bottom-up study on the ability of TiO 2 and ZrO 2 to optimize the CO 2 conversion to methanol on Cu, using combined density functional theory (DFT) calculations, kinetic Monte Carlo (KMC) simulations, in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) measurements, and steady-state flow reactor tests. Furthermore, the theoretical results from DFT and KMC agree with in situ DRIFTS measurements, showing that both TiO 2 and ZrO 2 help to promote methanol synthesis on Cu via carboxyl intermediates and the reverse water–gas-shift (RWGS) pathway; the formate intermediates, on the other hand, likely act as a spectator eventually. The origin of the superior promoting effect of ZrO 2 is associated with the fine-tuning capability of reduced Zr 3+ at the interface, being able to bind the key reaction intermediates, e.g. *CO 2 , *CO, *HCO, and *H 2 CO, moderately to facilitate methanol formation. Our study demonstrates the importance of synergy between theory and experiments to elucidate the complex reaction mechanisms of CO 2 hydrogenation for the realization of a better catalyst by design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrical Engineering in Los Alamos Neutron Science Center Accelerator

The field of electrical engineering plays a significant role in particle accelerator design and operations. Los Alamos National Laboratories LANSCE facility utilizes the electrical energy concepts of power distribution, plasma generation, radio frequency energy, electrostatic acceleration, signals and diagnostics. The culmination of these fields produces a machine of incredible potential with uses such as isotope production, neutron spallation, neutron imaging and particle analysis. The key isotope produced in LANSCE isotope production facility is Strontium-82 which is utilized for medical uses such as cancer treatment and positron emission tomography also known as PET scans. Neutron spallation is one of the very few methods used to produce neutrons for scientific research the other methods are natural decay of transuranic elements from nuclear reactors. Accelerator produce neutrons by accelerating charged particles into neutron dense elements such as tungsten imparting a neutral particle with kinetic energy, this has the benefit of producing a large number of neutrons as well as minimizing the waste generated. Utilizing the accelerator scientist can gain an understanding of how various particles behave and interact with matter to better understand the natural laws of physics and the universe around us.

43 PARTICLE ACCELERATORS↗

Integrated Flue Gas Purification and Latent Heat Recovery for Pressurized Oxy-Combustion (Final Scientific/Technical Report)

Pressurized oxy-combustion has been identified by DOE as a transformational technology for coal power with carbon capture due to the advantages that are realized when the combustion process is pressurized. The staged pressurized oxy-combustion (SPOC) process is particularly attractive as the efficiency of the process is almost 6 percentage points greater than that of first generation oxy-combustion. A critical component of the SPOC process, and potentially other pressurized combustion processes, is the Direct Contact Cooler (DCC) where the latent heat of the flue gas moisture is recovery to improve plant efficiency while simultaneously removing SO x and NO x from the flue gas, so that the FGD and de-NO x processes can be eliminated, and the cost of electricity minimized. The objective of this R&D effort was to advance the TRL of the DCC technology, which included performance testing at a 100 kW scale to validate the process and obtain key engineering data for scale-up. A collateral objective was to study the gas- and liquid-phase kinetics, and the development of a systematic chemical mechanism validated by experimental data. Experiments in a bench-scale stirred reactor provided an updated understanding of the liquid chemistry and the effects of temperature and pH. This information was used to develop a reduced reaction mechanism, which was subsequently incorporated in an ASPENbased process model, to allow for evaluation of the DCC at full scale. A small-pilot DCC column was designed, constructed and tested using simulated flue gas at the pressurized oxy-combustion test facility at Washington University in St. Louis. In the majority of tests, the SO 2 capture approached 100%, making the NO x capture the primary metric of capture efficiency. An NO x capture efficiency of 90% was achieved when the gas residence time was 95 seconds, demonstrating that high capture rates can be attained with reasonable reactor size. At higher temperatures (up to 200°C inlet gas temperature) the total NO x scrubbing efficiency was reduced by approximately 10% (compared to room temp.) and this was attributed to a reduced NO oxidation rate. A significant amount of SO 2 was present in the gas outlet (10%) only when the temperature was high and the N:S ratio was low (N/S < 1), which highlights the necessity of controlling the NOx concentration in the flue gas for complete sulfur scrubbing. After incorporated our optimized chemical mechanism into an ASPEN process model, various full-scale configurations of the DCC were evaluate, and the results indicate that the proposed DCC can accomplish its intended goals at full scale and at a modest size. Thus, the results of this project indicate that the DCC is a promising technology for recovery of the latent heat of the moisture in the flue gas while simultaneously scrubbing the nitrogen and sulfur oxides, thus enabling pressurized oxy-combustion, in general, and the SPOC process, in particular.

01 COAL, LIGNITE, AND PEAT↗

Methane Hydrate Formation on Clay Mineral Surfaces: Thermodynamic Stability and Heterogeneous Nucleation Mechanisms

Heterogeneous nucleation of methane hydrates has been examined using molecular simulation, experimental bulk synthesis, and scanning probe microscopy. Theoretical nucleation rates were determined using molecular dynamics simulations as a function of clay surface represented by hydrophobic and hydrophilic systems. Methane hydrates were synthesized with and without Na-montmorillonite in a bulk reactor pressure assembly. X-ray diffraction and Raman spectroscopy confirm the nucleation and growth of the synthesized hydrates. Various kinetic pathways were explored to produce methane or isobutene clathrates in an ultra-high vacuum apparatus at very low temperatures but scanning probe microscopy only indicates the formation of ice.

36 MATERIALS SCIENCE↗

Modeling Species Inhibition and Competitive Adsorption in Urea-SCR Catalysts

Although the urea-SCR technology exhibits high NOx reduction efficiency over a wide range of temperatures among the lean NOx reduction technologies, further improvement in low-temperature performance is required to meet the future emission standards and to lower the system cost. In order to improve the catalyst technologies and optimize the system performance, it is critical to understand the reaction mechanisms and catalyst behaviors with respect to operating conditions. Urea-SCR catalysts exhibit poor NOx reduction performance at low temperature operating conditions (T < 150 C). We postulate that the poor performance is either due to NH3 storage inhibition by species like hydrocarbons or due to competitive adsorption between NH3 and other adsorbates such as H2O and hydrocarbons in the exhaust stream. In this paper we attempt to develop one-dimensional models to characterize inhibition and competitive adsorption in Fe-zeolite based urea-SCR catalysts based on bench reactor experiments. We further use the competitive adsorption (CA) model to develop a standard SCR model based on previously identified kinetics. Simulation results indicate that the CA model predicts catalyst outlet NO and NH3 concentrations with minimal root mean square error.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Physics model of a gas-cooled fast reactor: Review and assessment

The current physics design and analysis model was reviewed and assessed for its application to a long-life gas-cooled fast reactor (GFR) design. The physics design uses MICROX, BURP, and DIF3D for the cross section generation, depletion calculation, and criticality and flux calculation, respectively. For the application to the long-life GFR, the depletion model was adjusted such that more lumped fission products are included in the burn-up chain to preserve the reaction rate and fuel mass. The performance of the physics design tools including the adjustment of the depletion model was assessed against Monte Carlo depletion calculations. The comparison has shown that the excess reactivity and cycle length of the long-life GFR are reasonably predicted. Some discrepancies were found at the beginning of cycle, which can be attributed to the differences between the nuclear data used in each model. Further studies will be carried out to update the cross section library of the MICROX code for agreement with the latest sets and to expand the fuel burn-up chain for the high burn-up and recycling fuel cycle analysis. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Validation of nuclear design method by measured data obtained in the physics test at a small fast reactor

The present paper discusses applicability of the measured data of Joyo cores from a view point of integral validation for the 4S nuclear design methodology. Through the evaluation of isothermal reactivity coefficients and reactivity losses due to burnup, the results confirm that those MK-I and MK-II database are effective in order to increase the dataset for uncertainty estimation for the prediction. Discussions on the 4S design method validation are also done through the analyses of criticality, power distributions and reactivity loss due to burn-up. The C/E values for criticality and reaction rate distributions are confirmed to be consistent with those obtained from the physics benchmark experiments. Through an analysis of burnup coefficient of the MK-I core by the detailed Monte Carlo calculations, the C/E value is 1.1, which is close to 1.06 obtained by the deterministic transport analysis. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Chemical and Radiological Compatibility Testing of 3D Printed Materials

To dramatically increase the adaptability, performance, and safety of processes in support of the Defense Waste Processing Facility (DWPF), Savannah River National Lab (SRNL) plans to perform chemical and radiological compatibility testing on a wide variety of 3D printed materials of interest. The 3D printing process provides numerous strategic operational benefits such as rapid prototyping of complex designs and geometry specific to the needs of the nuclear waste disposition process, as well as on-demand rapid prototyping and iteration with materials that aren’t as accessible through traditional manufacturing methods. Reaction chemistry in simulated waste batches can be matched closely to its radioactive counterpart, but glass reactor vessels have limitations. Vessel geometry can play a big factor in mixing transport limitations, process chemistry, and degradation reaction kinetics. In addition, additive manufacturing allows for much more detailed vessel design than traditional alternatives. Waste processing techniques in DWPF also encounter extreme chemical environments including high pH, strong acids, abrasive slurries, and significant irradiation. To meet these challenges, a matrix of various polymer, ceramic, and metal additive manufacturing materials have been exposed to a suite of chemical environments of interest as well as radioactive dose (such as gamma radiation from 60 Co) to properly test their durability under these conditions. Mass change has been monitored over a period of up to a week in these conditions, as well as added characterization for surface modification through Scanning Electron Microscopy/Electron Dispersive X-ray analysis (SEM/EDX). Further chemical characterization has been monitored through Fourier-Transform InfraRed Spectroscopy (FTIR), with planned investigation via thermal and tensile strength degradation. While the direct product of this research is identification of material(s) that can withstand specific hazardous environments encountered by the mercury water wash tank in DWPF process simulation experiments, the reference base of materials will be used for many other nuclear processes in the pursuit of rapidly developed, cost-efficient, and highly specific devices for environmental remediation and much more.

Wilson, Nathan W. [Savannah River National Laborat↗

Kinetic Measurements in Heterogeneous Catalysis

This contribution is about the experimental determination of the rate of a heterogeneous catalytic reaction and the analysis of kinetic data. In this case, the reaction rate can be defined as the frequency at which the closed sequence of elementary steps transforming reactants into products is occurring. However, the rate of chemical reaction is not directly observed; rather, one records the rate of substance change. The rate of chemical reaction is calculated based on the rate of substance change and assumed stoichiometry of the reaction. In order to make this an intensive quantity (i.e., independent of the volume in which the reaction is performed, this frequency is divided by the latter or by a quantity proportional to the latter). As the focus of what follows is on heterogeneously catalyzed reactions this can be the catalyst mass, the catalyst surface area or the total number of active sites present in the reaction volume confined by the walls of a chemical reactor. For example, the rate may be reported as one of the following: Net rate of consumption/production of component i mol m-3 s-1 Net specific rate of consumption/production of component i mol kg-1 s-1 Rate of substance change (per unit volume of catalyst) mol m-3 s-1 Specific reaction rate (per unit mass of catalyst) mol kg-1 s-1 Net rate of consumption/production of component i mol m-2 s-1 The turnover frequency (TOF) is a characteristic originally introduced by Boudart [1] is expressed as TOF=R/G_tot , where R is the steady-state rate of reactant consumption or product generation and G_totis the total areal density of active sites [mol m-2]. The latter is typically taken from experimental chemisorption data obtained at low temperature. The advancement of a chemical reaction leads to changes in the amounts of reactants and products which, for a stoichiometric single reaction, are connected by the stoichiometric coefficients. In many cases, for the sake of simplicity, we will assume that the investigated reaction proceeds according to a single reaction pathway, so that the net production rate of a reaction component is directly proportional to the reaction rate and that the latter equals the net production rate of any of the involved components when divided by the appropriate stoichiometric coefficient. For complex stoichiometric reactions the net production rates of the involved components are linear combinations of the reaction rates. Different goals for kinetic measurements can be formulated: Catalyst testing, i.e., obtaining the kinetic dependences for the development and discrimination of efficient catalytic materials. Precise kinetic characterization of active materials via high-throughput screening is a part of such activity. Detailed kinetics, i.e., revealing the detailed mechanism of complex catalytic reaction via systematic kinetic studies, both steady-state and non-steady-state Industrial kinetics, i.e., obtaining data and relationships for describing and predicting the behaviour of catalytic reactors and processes at industrial scale Finally, mathematical modeling and analysis where kinetic measurements provide data for understanding complex kinetic phenomena, e.g., oscillations, non-linear self-organization, etc.

36 MATERIALS SCIENCE↗

Verification of the PERSENT Software

Ongoing commercial design activities require a thorough verification of the Argonne Reactor Computation codes be performed. DIF3D is central to this system and substantial work has been done to verify its accuracy on several identified commercial needs. This manuscript details the verification work done on PERSENT which relies upon the DIF3D code for its forward and adjoint flux solution. Previous work identified the PERSENT features required to be verified to support commercial design activities, features of which are generally applicable to hexagonal-Z fast reactor designs. The scope of this verification effort includes verifying PERSENT’s ability to correctly calculate four key quantities: perturbation worth distributions, kinetics parameters, sensitivity coefficients, and cross section uncertainty quantification. This manuscript provides the verification tasks and their results with respect to these quantities needed for commercial design activities. For the perturbation worth distributions, hand calculations are deployed to verify the PERSENT calculated results. Similarly, hand calculation of the PERSENT computed kinetics parameters is also used to verify the PERSENT results. In both of these, the input to PERSENT is manipulated to ensure the hand calculation exactly matches the equations PERSENT is calculating. The sensitivity coefficients involve calculating the derivatives of a parameter (such as reactivity worth), with respect to the cross section data. Direct finite difference calculations with DIF3D are used to verify the PERSENT calculated results. For the uncertainty quantification, manufactured input to PERSENT is used to allow an exact hand calculation to reproduce the PERSENT calculated results. The work detailed in this report verified that significant issues were identified for earlier versions of PERSENT for sensitivity coefficients which were corrected in this work and thus version 12.1.0 of PERSENT must be used to reproduce all of the verified work in this report.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Cr segregation at the FeCr surface and the origin of corrosion resistance in ferritic steels

Structural materials in Gen-IV nuclear reactors will face severe conditions of high operating temperatures, high neutron flux exposure, and corrosive environment. Radiation effects and corrosion and chemical compatibility issues are factors that will limit the materials lifetime. Low-chromium (9-12 Cr wt.%) ferritic martensitic (F/M) steels are being considered as possible candidates because they offer good swelling resistance and good mechanical properties under extreme conditions of radiation dose and irradiation temperature. The surface chemistry of FeCr alloys, responsible for the corrosion properties, is complex. It exists today a controversy between equilibrium thermodynamic calculations, which suggest Cr depletion at the surface driven by the higher surface energy of Cr, and experimental data which suggest the oxidation process occurs in two stages, first forming a Fe-rich oxide, followed by a duplex oxide layer, and ending with a Cr-rich oxide. Moreover, it has been shown experimentally that corrosion resistance of F/M steels depends significantly on Cr content, increasing with increasing Cr content and with a threshold around 10% Cr, below which, the alloy behaves as pure Fe. In an attempt to rationalize these two contradicting observations and to understand the physical mechanism behind corrosion resistance in these materials we perform atomistic simulations using our FeCr empirical potential and analyze Cr equilibrium distributions at different compositions and temperatures in single and polycrystalline samples. We analyze the controversy in terms of thermodynamic and kinetic considerations.

42 ENGINEERING↗

Forward and inverse predictive transient models of TREAT using surrogate reactivity models

In this work, we present two novel approaches for predicting the power evolution and control rod height of the Transient Reactor Test Facility (TREAT) to support experiment modeling; specifically, transient analysis of the NASA-sponsored Sirius series of experiments. These approaches utilize steady-state Monte Carlo model, point kinetics model, and surrogate models to predict power evolution and control rod axial position during transient experiments. Both approaches were tested and validated against several Sirius experiments that were performed in the TREAT facility at different power levels. The validation test results show very good agreement with the experimental data, and the models were able to accurately predict the power evolution and the axial control rod position with an average error within 3.0%. Finally, this indicates that these approaches will help the reactor engineering team of the TREAT facility in preparing and predicting the power and temperature of the experiment.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Uncertainty Quantification and Management for Multi-scale Nuclear Materials Modeling

Understanding and improving microstructural mechanical stability in metals and alloys is central to the development of high strength and high ductility materials for cladding and cores structures in advanced fast reactors. Design and enhancement of radiation-induced damage tolerant alloys are facilitated by better understanding the connection of various unit processes to collective responses in a multiscale model chain, including: dislocation nucleation, absorption and desorption at interfaces; vacancy production, radiation-induced segregation of Cr and Ni at defect clusters (point defect sinks) in BCC Fe-Cr ferritic/martensitic steels; investigation of interaction of interstitials and vacancies with impurities (V, Nb, Ta, Mo, W, Al, Si, P, S); time evolution of swelling (cluster growth) phenomena of irradiated materials; and energetics and kinetics of dislocation bypass of defects formed by interstitial clustering and formation of prismatic loops, informing statistical models of continuum character with regard to processes of dislocation glide, vacancy agglomeration and swelling, climb and cross slip.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

COMPUTER MODELING OF HIGH-LEVEL WASTE GLASS TEMPERATURES WITHIN DWPF CANISTERS DURING POURING AND COOL DOWN

This report describes the results of a computer simulation study to predict the temperature of the glass at any location inside a DWPF canister during pouring and subsequent cooling. These simulations are an integral part of a larger research focus aimed at developing methods to predict, evaluate, and ultimately suppress nepheline formation in HLW glasses. That larger research focus is centered on holistically understanding nepheline formation in HLW glass by exploring the fundamental thermal and chemical driving forces for nepheline crystallization with respect to realistic processing conditions. Through experimental work, the goal is to integrate nepheline crystallization potential in HLW glass with processing capability to ultimately optimize waste loading and throughput while maintaining an acceptable product with respect to durability. The results of this study indicated severe temperature gradients and prolonged temperature dwell times exist throughout different locations in the canister and that the time and temperatures that HLW glass is subjected to during processing is a function of pour rate. The simulations indicate that crystallization driving forces are not uniform throughout the glass volume in a DWPF (or DWPF-like) canister and illustrate the importance of considering overall kinetics (chemical and thermal driving forces) of nepheline formation when developing methods to predict and suppress its formation in HLW glasses. The intended path forward is to use the simulation data both as a driver for future experimental work and, as an investigative tool for evaluating the impact of experimental results. Simulation data will be used to develop laboratory experiments to more acutely evaluate nepheline formation in HLW glass by incorporating the simulated temperatures throughout the canister into the laboratory experiments. Concurrently, laboratory experiments will be performed to identify nepheline crystallization potential in HLW glass as a function of time and temperature, the results of which will be fed back into simulations to evaluate the potential impacts. Through an iterative process involving computer simulations and experimental results, the potential for nepheline crystallization in HLW glass can be predicted, evaluated, and suppressed to maximize waste loading and throughput of canisters.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Jacobian Free-Newton Krylov Discontinuous Galerkin Method and Physics-Based Preconditioning for Nuclear Reactor Simulations

Multidimensional, higher-order (2nd and higher) numerical methods have come to the forefront in recent years due to significant advances of computer technology and numerical algorithms, and have shown great potential as viable design tools for realistic applications. To achieve this goal, implicit high-order accurate coupling of the multiphysics simulations is a critical component. One of the issues that arise from multiphysics simulation is the necessity to resolve multiple time scales. For example, the dynamical time scales of neutron kinetics, fluid dynamics and heat conduction significantly differ (typically >1010 magnitude), with the dominant (fastest) physical mode also changing during the course of transient [Pope and Mousseau, 2007]. This leads to the severe time step restriction for stability in traditional multiphysics (i.e. operator split, semi-implicit discretization) simulations. The lower order methods suffer from an undesirable numerical dissipation. Thus implicit, higher order accurate scheme is necessary to perform seamlessly-coupled multiphysics simulations that can be used to analyze the “what-if” regulatory accident scenarios, or to design and optimize engineering systems.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Preliminary Kinetic Analysis of Non-Equilibrium Plasma- Assisted Methanol Pyrolysis and Oxidation Experiments

Efforts to enhance power generation efficiency and reduce emissions have driven interest in novel combustion techniques, including non-equilibrium plasma (NEP) ignitors. NEP ignitors show promise in improving energy conversion efficiency, fuel reforming, emission control, and lean-flammability limits. However, their adoption is hindered by a limited understanding of the interplay between plasma-enhanced combustion and thermal chemistry, particularly for complex fuels under engine-relevant conditions. Developing experimentally validated kinetic mechanisms is therefore critical. Additionally, the increasing interest in renewable biofuels like ethanol and methanol, coupled with the desirable qualities of NEP ignitors, presents a compelling opportunity for study. Therefore, this work acts as an extension of a previous work (Bopaiah et al., 2023) pertaining to the experimental results of NEP-assisted methanol pyrolysis and oxidation. Experiments were performed with a custom-built plasma flow reactor at 0.5 atm and temperatures from 523-1203 K. All reactive mixtures are extremely diluted to minimize exothermicity due to reactivity, allowing isothermal assumptions and the isolation of plasma chemistry from thermal chemistry. A dielectric barrier discharge plasma, at 14 kV and 15 ns full-width half maximum, was applied to the reactive mixture at varying frequencies to maintain the number of pulses with increasing temperature. Steady-state product speciation was performed downstream of the reactor with ex-situ GC/MS diagnostics. The attained experimental results were examined through in-depth analysis performed by means of an in-development plasma-coupled kinetic mechanism. As discussed in the previous work, the plasma significantly accelerates methanol pyrolysis, increasing stable intermediate production, including oxygenated and nitrile species. Plasma-assisted oxidation shows even faster fuel consumption compared to pyrolysis and a 200 K ignition shift compared to thermal oxidation. For plasma-assisted pyrolysis, the model demonstrates that accelerated fuel consumption stems from dissociative quenching of excited N2 states with fuel and H2, generating H radicals that react to rapidly form CH3 and CH2OH radicals. At low temperatures, these radicals recombine to produce oxygenates, while CH3 drives nitrile and hydrocarbon formation at higher temperatures. While the model captures pyrolysis trends well, discrepancies in methane, ethylene, and ethanol predictions are present. Similarly, the model faces challenges in accurately representing plasma-assisted oxidation, predicting a much steeper fuel gradient and ignition 100 K earlier than the experiment. While a similar scheme to pyrolysis is nested in the reaction pathway, the enhancement of the O and H radical fluxes and their initiation of the OH and HO2 radical pools dominate fuel and intermediate oxidation. The overestimation of these processes is shown to be responsible for the divergence of model from experiment. While the modelling predictions of this preliminary mechanism are not perfect, they serve as a valuable starting point. Primarily, they elicited new reaction pathways that are not otherwise possible in thermal chemistry induced reaction kinetics. The results also provide a basis for the future work that should be performed. For example, theoretical and experimental studies on excited nitrogen species and fuel/fuel radical interactions, quantification of the NOx production, and the kinetics behind the slow ignition observed in oxidation should be emphasized.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗