Search NASA⌕ Search

SEARCH · Search NASA

Results for “Reduced Defects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

2,3,4,7,8-Pentachlorodibenzofuran is far less potent than 2,3,7,8-tetrachlorodibenzo-p-dioxin in disrupting the pituitary–gonad axis of the rat fetus

The effect of 2,3,4,7,8-pentachlorodibenzofuran (PnCDF) on the fetal pituitary–gonad axis was compared with that produced by 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) in Wistar rats. Maternal treatment at gestational day (GD) 15 with PnCDF and TCDD reduced the fetal expression at GD20 of pituitary luteinizing hormone (LH) and the testicular proteins necessary for steroidogenesis. The relative potencies of PnCDF ranged from 1/42nd to 1/63rd of the TCDD effect. While PnCDF, at a dose sufficient to cause a reduction in fetal LH, provoked defects in sexual behavior at adulthood, a dose less than the ED{sub 50} failed to produce any abnormality. There was a loss of fetal body weight following in utero exposure to PnCDF, and the effect of PnCDF was also much less than that of TCDD. The disturbance in fetal growth was suggested to be due to a reduction in the level of fetal growth hormone (GH) by dioxins. The disorder caused by PnCDF/TCDD in the fetal pituitary–gonad axis occurred at doses less than those needed to cause wasting syndrome in pubertal rats. The harmful effect of PnCDF relative to TCDD was more pronounced in fetal rats than in pubertal rats. These lines of evidence suggest that: 1) PnCDF as well as TCDD imprints defects in sexual behavior by disrupting the fetal pituitary–gonad axis; 2) these dioxins hinder fetal growth by reducing the expression of fetal GH; and 3) the fetal effects of PnCDF/TCDD are more sensitive than sub-acute toxicity during puberty, and the relative effect of PnCDF varies markedly depending on the indices used. - Highlights: • 2,3,4,7,8-Pentachlorodibenzofuran (PnCDF) lowers gonadal steroidogenesis in fetuses. • PnCDF exerts the above effect through an initial attenuation in gonadotropin level. • PnCDF imprints sexual immaturity by transiently disrupting the pituitary–gonad axis. • PnCDF also disturbs pup growth probably due to a reduction in growth hormone level. • The above effects are far lesser in PnCDF than 2,3,7,8-tetrachlorodibenzo-p-dioxin.

60 APPLIED LIFE SCIENCES↗

Cyclic deformation leads to defect healing and strengthening of small-volume metal crystals

Significance Producing strong and defect-free materials is an important objective in developing many new materials. Thermal treatments aimed at defect elimination often lead to undesirable levels of strength and other properties. Although monotonic loading can reduce or even eliminate dislocations in submicroscale single crystals, such “mechanical healing” causes severe plastic deformation and significant shape changes. Inspired by observing an easier pullout of a partly buried object after shaking it first, we demonstrate that “cyclic healing” of the small-volume single crystals can indeed be achieved through repeated low-amplitude straining. The cyclic healing method points to versatile avenues for tailoring the defect structure and strengthening of nanoscale metal crystals without the need for thermal annealing or severe plastic deformation.

36 MATERIALS SCIENCE↗

An NV − center in magnesium oxide as a spin qubit for hybrid quantum technologies

Recent predictions suggest that oxides, such as MgO and CaO, could serve as hosts of spin defects with long coherence times and thus be promising materials for quantum applications. However, in most cases, specific defects have not yet been identified. Here, by using a high-throughput first-principles framework and advanced electronic structure methods, we identify a negatively charged complex between a nitrogen interstitial and a magnesium vacancy in MgO with favorable electronic and optical properties for hybrid quantum technologies. We show that this NV − center has stable triplet ground and excited states, with singlet shelving states enabling optical initialization and spin-dependent readout. We predict several properties, including absorption, emission, and zero-phonon line energies, as well as zero-field splitting tensor, and hyperfine interaction parameters, which can aid in the experimental identification of this defect. Our calculations show that due to a strong pseudo-Jahn Teller effect and low-frequency phonon modes, the NV − center in MgO is subject to a substantial vibronic coupling. We discuss design strategies to reduce such coupling and increase the Debye-Waller factor, including the effect of strain and the localization of the defect states. We propose that the favorable properties of the NV − defect, along with the technological maturity of MgO, could enable hybrid classical-quantum applications, such as spintronic quantum sensors and single qubit gates.

36 MATERIALS SCIENCE↗

Optical and microstructural studies of erbium-doped TiO 2 thin films on silicon, SrTiO 3 , and sapphire

Rare-earth ion doped oxide thin films integrated on silicon substrates provide a route toward scalable, chip-scale platforms for quantum coherent devices. Erbium-doped TiO 2 is an attractive candidate: the Er 3+ optical transition is compatible with C-band optical fiber communications, while TiO 2 is an insulating dielectric compatible with silicon process technology. Through structural and optical studies of Er-doped TiO 2 thin films grown via molecular beam deposition on silicon, SrTiO 3 , and sapphire substrates, we have explored the impact of polycrystallinity and microstructure on the optical properties of the Er emission. Comparing polycrystalline TiO 2 (rutile)/Si with single-crystalline TiO 2 (rutile)/r-sapphire and polycrystalline TiO 2 (anatase)/Si with single-crystalline TiO 2 (anatase)/SrTiO 3 , we observe that the inhomogeneous linewidth (Γ inh ) of the most prominent peak in the Er spectrum (the Y 1 –Z 1 transition, 1520 and 1533 nm in rutile and anatase TiO 2 ) is significantly narrower in the polycrystalline case. This implies a relative insensitivity to extended structural defects and grain boundaries in such films (as opposed to, e.g., point defects). We show that the growth of an undoped, underlying TiO 2 buffer on Si can reduce Γ inh by a factor of 4–5. Expectedly, Γ inh also reduces with decreasing Er concentrations: we observe a ∼2 order of magnitude reduction from ∼1000 ppm Er to ∼10 ppm Er. Γ inh then gets limited to a residual value of ∼5 GHz that is insensitive to further reduction in the Er concentration. Based upon the above results, we argue that the optical properties in these thin films are limited by the presence of high “grown-in” point defect concentrations.

Chemical elements↗

The Effects of Hydrogen Iodide Back Surface Treatment on CdTe Solar Cells

An appropriate electrical back contact in CdTe solar cells is crucial to achieving high power conversion efficiency. In this work, we develop a facile back surface treatment method for CdTe solar cells using hydroiodic acid (HI) and investigate the effects of HI etching on the CdTe surfaces. The electrical properties of the CdTe absorber and interfaces are characterized by current-voltage, capacitance-voltage, admittance spectroscopy, and complex capacitance spectroscopy measurements. Here, the HI-etched devices show slightly higher apparent carrier concentrations than the control devices, suggesting an increased copper doping in the CdTe absorber. The potential barrier height of the back contact is reduced from 0.430 to 0.368 eV after the HI-treatment, accompanied by reduced contact resistance and carrier recombination. Additionally, the HI-treatment eliminates a defect signature at 0.409 eV. All of these HI-treatment effects lead to improved power conversion efficiency of CdTe solar cells through enhancement of the fill factor, the short circuit current, and open circuit voltage in order of significance.

14 SOLAR ENERGY↗

Structure of the second RRM domain of Nrd1, a fission yeast MAPK target RNA binding protein, and implication for its RNA recognition and regulation

Highlights: •Solution structure of the second RRM of Nrd1 was determined. •RNA binding site of the second RRM was estimated. •Regulatory mechanism of RNA binding by phosphorylation is discussed. -- Abstract: Negative regulator of differentiation 1 (Nrd1) is known as a negative regulator of sexual differentiation in fission yeast. Recently, it has been revealed that Nrd1 also regulates cytokinesis, in which physical separation of the cell is achieved by a contractile ring comprising many proteins including actin and myosin. Cdc4, a myosin II light chain, is known to be required for cytokinesis. Nrd1 binds and stabilizes Cdc4 mRNA, and thereby suppressing the cytokinesis defects of the cdc4 mutants. Interestingly, Pmk1 MAPK phosphorylates Nrd1, resulting in markedly reduced RNA binding activity. Furthermore, Nrd1 localizes to stress granules in response to various stresses, and Pmk1 phosphorylation enhances the localization. Nrd1 consists of four RRM domains, although the mechanism by which Pmk1 regulates the RNA binding activity of Nrd1 is unknown. In an effort to delineate the relationship between Nrd1 structure and function, we prepared each RNA binding domain of Nrd1 and examined RNA binding to chemically synthesized oligo RNA using NMR. The structure of the second RRM domain of Nrd1 was determined and the RNA binding site on the second RRM domain was mapped by NMR. A plausible mechanism pertaining to the regulation of RNA binding activity by phosphorylation is also discussed.

60 APPLIED LIFE SCIENCES↗

Autophagy induced by type III secretion system toxins enhances clearance of Pseudomonas aeruginosa from human corneal epithelial cells

Highlights: • Ocular P. aeruginosa isolates induce autophagy in human corneal epithelial cells. • T3SS mutants were defective in inducing autophagy and becn1 expression. • T3SS (−)ve strains were less sensitive to external autophagy modulators. • Pro-autophagic role of T3SS regulates intracellular survival of P. aeruginosa. Corneal ulcers caused by Pseudomonas aeruginosa may lead to severe visual disability due to impaired bacterial clearance from corneal tissues. Our purpose was to study the role of autophagy in the intracellular clearance of P. aeruginosa from human corneal epithelial cells (HCET) and its regulation by the bacterial type III secretion system (T3SS) toxins. Nine different corneal ulcer isolates of P. aeruginosa, PAO1 and T3SS mutants of PAO1 were used to infect HCET cells. Induction of autophagy (Immunofluorescence and Western blot) and pro-inflammatory gene expression (real time PCR) by P. aeruginosa and the role of autophagy in intracellular bacterial clearance were studied in the context of T3SS genotypes. The clinical isolates and PAO1 induced autophagy irrespective of the T3SS genotype, whereas the T3SS mutants were relatively defective in inducing autophagy and becn1 gene expression. External induction of autophagy significantly reduced the intracellular load of P. aeruginosa strains that were associated with worst clinical outcomes. The T3SS negative isolate and PAO1ΔexoST were less sensitive to pharmacological modulation of autophagy and had relatively higher replication potential, suggesting a possible mechanism of bacterial survival in the absence of T3SS toxins. Overall, our results highlight a selective role for autophagy in bacterial clearance from corneal epithelial cells and emphasize the pro-autophagic role of bacterial toxins in the context of corneal ulcers.

60 APPLIED LIFE SCIENCES↗

Axin is expressed in mitochondria and suppresses mitochondrial ATP synthesis in HeLa cells

Many recent studies have revealed that axin is involved in numerous cellular functions beyond the negative regulation of β-catenin-dependent Wnt signaling. Previously, an association of ectopic axin with mitochondria was observed. In an effort to investigate the relationship between axin and mitochondria, we found that axin expression suppressed cellular ATP production, which was more apparent as axin expression levels increased. Also, mitochondrial expression of axin was observed using two axin-expressing HeLa cell models: doxycycline-inducible ectopic axin expression (HeLa-axin) and axin expression enhanced by long-term treatment with XAV939 (HeLa-XAV). In biochemical analysis, axin is associated with oxidative phosphorylation (OXPHOS) complex IV and is involved in defects in the assembly of complex IV-containing supercomplexes. Functionally, axin expression reduced the activity of OXPHOS complex IV and the oxygen consumption rate (OCR), suggesting axin-mediated mitochondrial dysfunction. Subsequent studies using various inhibitors of Wnt signaling showed that the reduction in cellular ATP levels was weaker in cases of ICAT protein expression and treatment with iCRT3 or NSC668036 compared with XAV939 treatment, suggesting that XAV939 treatment affects ATP synthesis in addition to suppressing Wnt signaling activity. Axin-mediated regulation of mitochondrial function may be an additional mechanism to Wnt signaling for regulation of cell growth. - Highlights: • Axin suppresses cellular ATP production and proliferation. • Axin is localized within mitochondrial OXPHOS complex IV and reduces its activity. • Axin alters supercomplex formation and mitochondrial respiratory functions. • Axin regulates energy metabolism through mitochondrial function and Wnt signaling.

60 APPLIED LIFE SCIENCES↗

Development of High-Efficiency GaAs Solar Cells Grown on Nanopatterned GaAs Substrates

One approach to reducing the cost of high-efficiency III–V devices involves adding patterned layers to heteroepitaxial or homoepitaxial substrates to facilitate substrate removal and reuse. However, few studies have focused explicitly on high-quality devices grown over patterned substrates, which is required for any cost saving to be beneficial. In this work, we demonstrate the growth of high-efficiency GaAs solar cells on GaAs substrates patterned with an array of nanoscale SiOX mask stripes. We show that reducing the pattern dimensions to submicron length scales with nanoimprint lithography enables defect-free coalescence. By varying the growth conditions, faceting of the epilayer material during overgrowth of the patterned mask was also controlled. A V/III ratio of 200 during MOVPE overgrowth produced smooth coalesced epilayers, which is desirable for the growth of subsequent device layers. Inverted GaAs front homojunction devices grown on patterned GaAs(001) substrates achieved threading dislocation densities below 5 × 10 5 cm –2 and maintained >23% solar cell efficiencies at one sun illumination, equivalent to control devices grown on unpatterned epi-ready substrates.

14 SOLAR ENERGY↗

Computational Investigation on Hydrodeoxygenation (HDO) of Acetone to Propylene on α-MoO 3 (010) Surface

Density functional theory (DFT) calculations were performed on the multistep hydrodeoxygenation (HDO) of acetone (CH 3 COCH 3 ) to propylene (CH 3 CHCH 2 ) on a molybdenum oxide (α-MoO 3 ) catalyst following an oxygen vacancy-driven pathway. First, a perfect O-terminated α-MoO 3 (010) surface based on a 4 × 2 × 4 supercell is reduced by molecular hydrogen (H 2 ) to generate a terminal oxygen (O t ) defect site. This process occurs via a dissociative chemisorption of H 2 on adjacent surface oxygen atoms, followed by an H transfer to form a water molecule (H 2 O). Next, adsorption of CH 3 COCH 3 on the oxygen-deficient Mo site forms an O–Mo bond and then the chemisorbed CH 3 COCH 3 forms CH 3 COCH 2 by transfer of an H atom to an adjacent O t site. The surface bound hydroxyl (OH) then transfers the H atom to the immobilized O atom to form surface-bound enol, CH 3 CHOCH 2 . The next step releases CH 3 CHCH 2 into the gas phase, while simultaneously oxidizes the surface back to a perfect O-terminated α-MoO 3 (010) surface. The adsorption of H 2 , and the formation of a terminal oxygen (Ot) vacancy, moves the conduction band minimum (CBM) from 1.2 eV to 0 and 0.3 eV, respectively. Climbing image-nudged elastic band (CI-NEB) calculations using a Perdew–Burke–Ernzerhof (PBE) functional in combination with double-ζ valence (DZV) basis sets indicate that the dissociative adsorption of H 2 is the rate-limiting step for the catalytic cycle with a barrier of 1.70 eV. Furthermore, the lower barrier for surface-mediated H transfer from primary-to-secondary carbon atom (0.63 eV) compared to that of a concerted direct H transfer to the secondary C atom with simultaneous desorption (2.02 eV) emphasizes the key role played by the surface in H transfer for effective deoxygenation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Defect Facilitated Phonon Transport through Kinks in Boron Carbide Nanowires

Nanowires of complex morphologies, such as kinked wires, have been recently synthesized and demonstrated for novel devices and applications. However, the effects of these morphologies on thermal transport have not been well studied. Through systematic experimental measurements, we show in this paper that single-crystalline, defect-free kinks in boron carbide nanowires can pose a thermal resistance up to ~30 times larger than that of a straight wire segment of equivalent length. Analysis suggests that this pronounced resistance can be attributed to the combined effects of backscattering of highly focused phonons and required mode conversion at the kink. Interestingly, it is also found that instead of posing resistance, structural defects in the kink can actually assist phonon transport through the kink and reduce its resistance. Finally, given the common kink-like wire morphology in nanoelectronic devices and required low thermal conductivity for thermoelectric devices, these findings have important implications in precise thermal management of electronic devices and thermoelectrics.

36 MATERIALS SCIENCE↗

Tunable and high-purity room temperature single-photon emission from atomic defects in hexagonal boron nitride

Two-dimensional van der Waals materials have emerged as promising platforms for solid-state quantum information processing devices with unusual potential for heterogeneous assembly. Recently, bright and photostable single photon emitters were reported from atomic defects in layered hexagonal boron nitride (hBN), but controlling inhomogeneous spectral distribution and reducing multi-photon emission presented open challenges. Here, we demonstrate that strain control allows spectral tunability of hBN single photon emitters over 6 meV, and material processing sharply improves the single photon purity. We observe high single photon count rates exceeding 7 × 10 6 counts per second at saturation, after correcting for uncorrelated photon background. Furthermore, these emitters are stable to material transfer to other substrates. High-purity and photostable single photon emission at room temperature, together with spectral tunability and transferability, opens the door to scalable integration of high-quality quantum emitters in photonic quantum technologies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Improved open-circuit voltage in Cu(In,Ga)Se{sub 2} solar cells with high work function transparent electrodes

Hydrogenated indium oxide (IOH) is implemented as transparent front contact in Cu(In,Ga)Se{sub 2} (CIGS) solar cells, leading to an open circuit voltage V{sub OC} enhanced by ∼20 mV as compared to reference devices with ZnO:Al (AZO) electrodes. This effect is reproducible in a wide range of contact sheet resistances corresponding to various IOH thicknesses. We present the detailed electrical characterization of glass/Mo/CIGS/CdS/intrinsic ZnO (i-ZnO)/transparent conductive oxide (TCO) with different IOH/AZO ratios in the front TCO contact in order to identify possible reasons for the enhanced V{sub OC}. Temperature and illumination intensity-dependent current-voltage measurements indicate that the dominant recombination path does not change when AZO is replaced by IOH, and it is mainly limited to recombination in the space charge region and at the junction interface of the solar cell. The main finding is that the introduction of even a 5 nm-thin IOH layer at the i-ZnO/TCO interface already results in a step-like increase in V{sub OC}. Two possible explanations are proposed and verified by one-dimensional simulations using the SCAPS software. First, a higher work function of IOH as compared to AZO is simulated to yield an V{sub OC} increase by 21 mV. Second, a lower defect density in the i-ZnO layer as a result of the reduced sputter damage during milder sputter-deposition of IOH can also add to a maximum enhanced V{sub OC} of 25 mV. Our results demonstrate that the proper choice of the front TCO contact can reduce the parasitic recombination and boost the efficiency of CIGS cells with improved corrosion stability.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Chirality reversal of magnetic solitons in chiral Cr 1/3 TaS 2

Ferromagnetism in two-dimensional (2D) materials provides an ideal platform to study emergent electromagnetic phenomena in low dimensions for future spintronics. In magnetic-element intercalated transition metal dichalcogenides, topologically nontrivial spin textures, such as chiral helimagnetic spin states and chiral soliton lattices, are realized due to the chiral lattice distortions induced by intercalated magnetic ions. Consequently, the magnetic chirality is predictably determined by the sign of antisymmetric exchange interaction (or Dzyaloshinskii–Moriya interaction, DMI) vector that is coupled to the underlying crystal chirality. Here, using cryogenic Lorentz phase microscopy, we directly observed the chirality reversal behavior of the chiral soliton lattices in Cr 1/3 TaS 2 across the structural defects. We show that a partial 1 T stacking in 2H-TaS 2 locally reduces DMI, leading to magnetic chirality reversal with direct atomic resolution imaging. Furthermore, our experimental results show that manipulation of stacking sequence provides a viable way to control the chirality of topologically nontrivial soliton lattices in 2D magnets.

2D materials↗

Radio-frequency magnetron sputter deposition of ultrathick boron carbide films

The deposition of thick B 4 C films with low residual stress by conventional direct-current magnetron sputtering is accompanied by the formation of dust particulates contaminating the target, chamber, and substrates and leading to the formation of nodular defects in films. Here, we demonstrate that the formation of particulates is greatly reduced during radio-frequency magnetron sputtering (RFMS). We systematically study properties of B 4 C films deposited by RFMS with a substrate temperature of 330 °C, a target-to-substrate distance of 10 cm, Ar working gas pressure in the range of 4.5–12.0 mTorr (0.6–1.6 Pa), and substrate tilt angles of 0°–80°. All films are x-ray amorphous. A columnar structure develops with increasing either Ar pressure or substrate tilt. For columnar films, the column tilt angle decreases with increasing Ar pressure, which we attribute to a corresponding increase in the width of the distribution of impact angles of deposition flux. In contrast to the Keller–Simmons rule, the deposition rate increases with increasing Ar pressure, which suggests a better coupling of the RF energy to the plasma processes that lead to target sputtering at higher pressures. There is a critical substrate tilt angle above which the total residual stress is close to zero. This critical substrate tilt angle is ~0° for an Ar pressure of 12 mTorr (1.6 Pa). The lower residual stress state, necessary for depositing ultrathick films, is characterized by a larger concentration of nanoscale inhomogeneities and decreased mechanical properties. Based on these results, RFMS deposition of 60-μm-thick B 4 C films is demonstrated.

36 MATERIALS SCIENCE↗

The impact of system matrix dimension on small FOV SPECT reconstruction with truncated projections

Purpose: A dedicated cardiac hybrid single photon emission computed tomography (SPECT)/CT scanner that uses cadmium zinc telluride detectors and multiple pinhole collimators for stationary acquisition offers many advantages. However, the impact of the reconstruction system matrix (SM) dimension on the reconstructed image quality from truncated projections and 19 angular samples acquired on this scanner has not been extensively investigated. In this study, the authors aimed to investigate the impact of the dimensions of SM and the use of body contour derived from adjunctive CT imaging as an object support in reconstruction on this scanner, in relation to background extracardiac activity. Methods: The authors first simulated a generic SPECT/CT system to image four NCAT phantoms with various levels of extracardiac activity and compared the reconstructions using SM in different dimensions and with/without body contour as a support for quantitative evaluations. The authors then compared the reconstructions of 18 patient studies, which were acquired on a GE Discovery NM570c scanner following injection of different radiotracers, including {sup 99m}Tc-Tetrofosmin and {sup 123}I-mIBG, comparing the scanner’s default SM that incompletely covers the body with a large SM that incorporates a patient specific full body contour. Results: The simulation studies showed that the reconstructions using a SM that only partially covers the body yielded artifacts on the edge of the field of view (FOV), overestimation of activity and increased nonuniformity in the blood pool for the phantoms with higher relative levels of extracardiac activity. However, the impact on the quantitative accuracy in the high activity region, such as the myocardium, was subtle. On the other hand, an excessively large SM that enclosed the entire body alleviated the artifacts and reduced overestimation in the blood pool, but yielded slight underestimation in myocardium and defect regions. The reconstruction using the larger SM with body contour yielded the most quantitatively accurate results in all the regions of interest for a range of uptake levels in the extracardiac regions. In patient studies, the SM incorporating patient specific body contour minimized extracardiac artifacts, yielded similar myocardial activity, lower blood pool activity, and subsequently improved myocardium-to-blood pool contrast (p < 0.0001) by an average of 7% (range 0%–18%) across all the patients, compared to the reconstructions using the scanner’s default SM. Conclusions: Their results demonstrate that using a large SM that incorporates a CT derived body contour in the reconstruction could improve quantitative accuracy within the FOV for clinical studies with high extracardiac activity.

61 RADIATION PROTECTION AND DOSIMETRY↗

Impact of high-temperature annealing on hafnia-silica composite coatings deposited via ion beam sputtering for high-peak power 1064 nm lasers

The maximum power handling fluence of high-peak and average power laser systems is often limited by the laser damage of the coatings on optical components. Furthermore, these multilayer dielectric coatings are limited in their maximum power handling due to laser-damage-prone defects in the lower optical bandgap, higher optical index material. Some of these defects can be mitigated by thermal annealing to high temperatures, which can greatly reduce the linear absorbative precursors. Typically, hafnia and silica are the materials of choice for high-peak and average power laser systems in the ultraviolet through infrared spectral range; however, hafnia crystalizes readily when annealed at high temperatures. In this study, we prepare composite HfO 2 -SiO 2 coatings by co-sputtering hafnia and silica in an ion beam sputtering system and compare them to pure hafnia-based coatings. We demonstrate that crystallinity in hafnia can be completely suppressed when it is mixed with silica, such as the composite coatings in this study. High reflectors were fabricated and annealed, demonstrating that the multilayer dielectric stacks can survive high-temperature annealing and exhibit an excellent linear absorption of 0.2 +/- 1 ppm at 1064 nm. Short- and long-pulse laser damage was explored, demonstrating the complex relationship between linear absorption and the non-linear absorption which drives pulsed laser damage. These results provide an excellent route to the creation of very low linear absorption optical coatings, which also utilize low scattering materials that are best suited for high-peak and average power applications.

Harthcock, Colin [Lawrence Livermore National Labo↗