Search NASA⌕ Search

SEARCH · Search NASA

Results for “Source Physics Experiment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Using the X-FEL to photo-pump X-ray laser transitions in He-like Ne

Nearly four decades ago H-like and He-like resonantly photo-pumped laser schemes were proposed for producing X-ray lasers. However, demonstrating these schemes in the laboratory has proved to be elusive because of the difficulty of finding a strong resonant pump line. With the advent of the X-ray free electron laser (X-FEL) at the SLAC Linac Coherent Light Source (LCLS) we now have a tunable X-ray laser source that can be used to replace the pump line in previously proposed laser schemes and allow researchers to study the physics and feasibility of resonantly photo-pumped laser schemes. In this paper we use the X-FEL at 1174 eV to photo-pump the singly excited 1s2p state of He-like Ne to the doubly excited 2p3p state and model gain on the 2p3p-2p2s transition at 175 eV and the 2p3p-1s3p transition at 1017 eV. One motivation for studying this scheme is to explore possible quenching of the gain due to strong non-linear coupling effects from the intense X-FEL beam We compare this scheme with photo-pumping the He-like Ne ground state to the 1s3p singly excited state followed by lasing on the 3p-2s and 3d-2p transitions at 158 and 151 eV. Experiments are being planned at LCLS to study these laser processes and coherent quantum effects.

43 PARTICLE ACCELERATORS↗

Heat Flux Analysis From IR Imaging on Proto-MPEX

The Prototype Material Plasma Exposure eXperiment (Proto-MPEX) is a linear device used to develop the source and heating concept for MPEX, an experiment to study plasma–material interactions for future fusion reactors. This paper highlights recent analysis and results on Proto-MPEX using an infrared (IR) camera, a key tool for imaging heat fluxes measured at the material target. The target heat fluxes are crucial to understanding the source and heating concepts. The recent analysis includes the application of homography and 3-D finite-element methods to provide between-shot measurements of the 2-D target heat flux profile. The IR camera inferred heat flux is shown to correlate with Langmuir probe inferred heat fluxes for a range of parameters in helicon only and helicon + electron cyclotron heated discharges. Results show both desirable central and undesirable edge heat flux for helicon source and electron heating on the target. These heat flux measurements are shown to be important for better understanding of the source and heating physics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A Transdisciplinary Review of Deep Learning Research and Its Relevance for Water Resources Scientists

Deep learning (DL), a new generation of artificial neural network research, has transformed industries, daily lives, and various scientific disciplines in recent years. DL represents significant progress in the ability of neural networks to automatically engineer problem-relevant features and capture highly complex data distributions. I argue that DL can help address several major new and old challenges facing research in water sciences such as interdisciplinarity, data discoverability, hydrologic scaling, equifinality, and needs for parameter regionalization. This review paper is intended to provide water resources scientists and hydrologists in particular with a simple technical overview, transdisciplinary progress update, and a source of inspiration about the relevance of DL to water. The review reveals that various physical and geoscientific disciplines have utilized DL to address data challenges, improve efficiency, and gain scientific insights. DL is especially suited for information extraction from image-like data and sequential data. Techniques and experiences presented in other disciplines are of high relevance to water research. Meanwhile, less noticed is that DL may also serve as a scientific exploratory tool. A new area termed AI neuroscience , where scientists interpret the decision process of deep networks and derive insights, has been born. This budding subdiscipline has demonstrated methods including correlation-based analysis, inversion of network-extracted features, reduced-order approximations by interpretable models, and attribution of network decisions to inputs. Moreover, DL can also use data to condition neurons that mimic problem-specific fundamental organizing units, thus revealing emergent behaviors of these units. Vast opportunities exist for DL to propel advances in water sciences.

54 ENVIRONMENTAL SCIENCES↗

Linear arrays of stable atmospheric pressure microplasmas

Microdischarges produce cold atmospheric plasma when the discharge current is limited by the quenching of a microwave resonator. A quarter-wavelength microstripline resonator is shown to support stable atmospheric microplasma in pure argon. Electrical characterization of the microplasma shows that its impedance is resistive and capacitive (Z{sub p}=500-j900 {omega}). An array of these linear resonators generates a stable, line-shaped microplasma operating from a single power source due to close-coupling among adjacent resonators. Both simulations and experiments confirm that coupled-mode theory describes the collective behavior of linear microplasma arrays.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Comparing temperature convergence of shocked thin films of tin and iron to a bulk temperature source

An outstanding challenge in developing a complete equation of state for materials at elevated pressure and temperature is a robust method of determining the bulk temperature state under dynamic conditions. In metals, the determination of bulk temperature states by optical pyrometry is complicated by the small optical depth and thermal conduction effects. These effects lead to observed temperatures differing by 20% or more from the bulk temperature state. In this work, we show the presence of thermal conduction effects in temperature measurements of tin and iron coatings during dynamic compression experiments. We demonstrate that tin, in contrast to iron, coatings can fail to converge to a bulk temperature source over the time scale of the experiment, requiring the experimenter to modify assumptions, design, or analysis. This work bounds thermal transport at shocked conditions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spin squeezing of macroscopic nuclear spin ensembles

Spin squeezing has been explored in atomic systems as a tool for quantum sensing, improving experimental sensitivity beyond the spin standard quantum limit for certain measurements. To optimize absolute metrological sensitivity, it is beneficial to consider macroscopic spin ensembles, such as nuclear spins in solids and liquids. Coupling a macroscopic spin ensemble to a parametrically-modulated resonant circuit can create collective spin squeezing by generating spin correlations mediated by the circuit. We analyze the squeezing dynamics in the presence of decoherence and finite spin polarization, showing that achieving 7 dB spin squeezing is feasible in several nuclear spin systems. The metrological benefit of squeezing a macroscopic spin ensemble lies in the suppression of technical noise sources in the spin detection system relative to the spin projection noise. This expands the experimental sensitivity bandwidth when searching for signals of unknown frequency and can improve the resonant signal-to-noise ratio. Squeezing macroscopic spin ensembles may prove to be a useful technique for fundamental physics experiments aimed at detecting spin interactions with oscillating background fields, such as ultralight dark matter. Published by the American Physical Society 2025

Boyers, Eric↗

Investigating the Magnetorotational Instability with Dedalus, and Open-Souce Hydrodynamics Code

The magnetorotational instability is a fluid instability that causes the onset of turbulence in discs with poloidal magnetic fields. It is believed to be an important mechanism in the physics of accretion discs, namely in its ability to transport angular momentum outward. A similar instability arising in systems with a helical magnetic field may be easier to produce in laboratory experiments using liquid sodium, but the applicability of this phenomenon to astrophysical discs is unclear. To explore and compare the properties of these standard and helical magnetorotational instabilities (MRI and HRMI, respectively), magnetohydrodynamic (MHD) capabilities were added to Dedalus, an open-source hydrodynamics simulator. Dedalus is a Python-based pseudospectral code that uses external libraries and parallelization with the goal of achieving speeds competitive with codes implemented in lower-level languages. This paper will outline the MHD equations as implemented in Dedalus, the steps taken to improve the performance of the code, and the status of MRI investigations using Dedalus.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Radiometric observations of the 752.033-GHz rotational absorption line of H2O from a laboratory jet

With the aid of a high-resolution two-stage heterodyne radiometer, spectral absorption measurements of the 752.033 GHz line of water vapor were carried out, using a blackbody continuum as a background radiation source for investigating the absorptive properties of the H2O content of high altitude rocket plumes. To simulate this physical situation in a laboratory environment, a small steam jet was operated within a large high-vacuum chamber, with the H2O jet plume traversing the radiometer line of sight. The experiments verified that this rotational line is optically thick, with excitation temperatures below 100 K, in the downstream part of the plume, as predicted by theoretical modelling.

Dionne, G. F.↗

Using gamma-ray emission to measure areal density of ICF capsules

Fusion neutrons streaming from a burning ICF capsule generate gamma rays via nuclear inelastic scattering in the ablator of the capsule. The intensity of gamma-ray emission is proportional to the product of the ablator areal density ('{rho}R') and the yield of fusion neutrons, so by detecting the gamma rays we can infer the ablator areal density, provided we also have a measurement of the capsule's total neutron yield. In plastic-shell capsules, for example, {sup 12}C nuclei emit gamma rays at 4.44 MeV after excitation by 14.1-MeV neutrons from D+T fusion. These gamma rays can be measured by the Gamma Reaction History (GRH) experiment being built at the National Ignition Facility (NIF). A linear error analysis indicates the chief sources of uncertainty in inferred areal density.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A test stand for off-line laser ion source development at TRIUMF

A test stand for ion source development and laser resonance ionization spectroscopy was built and commissioned at TRIUMF. The test stand is needed to develop efficient ion sources that can function reliably in the hostile, high temperature, high radiation environment of TRIUMF's isotope separator on-line (ISOL) production target ion source. In addition, it enables laser resonance ionization spectroscopy to develop laser excitation schemes suitable for the solid-state laser systems used with TRIUMF's resonant ionization laser ion source . Also, it allows for possible improvement of current ion sources and validation of new designs. The test stand employs a copy of the ion optics used on-line, so that results can be transferred directly to radioactive ion beam production. Due to space restrictions and the need for rapid mass scans, a quadrupole mass spectrometer is used as a mass separator. One of the first experiments conducted on the laser ion source test stand (LIS STAND) was resonant ionization spectroscopy of gallium to improve on the ionization scheme previously used on-line, so that low yield isotopes (e.g., {sup 62}Ga) become available for experiments. Different Rydberg series in gallium were observed and autoionizing states were searched for. The overall LIS STAND system performance, characteristics, and the first resonant ionization spectroscopy are described.

74 ATOMIC AND MOLECULAR PHYSICS↗

Radiation sources with planar wire arrays and planar foils for inertial confinement fusion and high energy density physics research

This article reports on the joint success of two independent lines of research, each of them being a multi-year international effort. One of these is the development of innovative sources, such as planar wire arrays (PWAs). PWAs turned out to be a prolific radiator, which act mainly as a resistor, even though the physical mechanism of efficient magnetic energy conversion into radiation still remains unclear. We review the results of our extensive studies of PWAs. We also report the new results of the experimental comparison PWAs with planar foil liners (another promising alternative to wire array loads at multi-mega-ampere generators). Pioneered at UNR, the PWA Z-pinch loads have later been tested at the Sandia National Laboratories (SNL) on the Saturn generator, on GIT-12 machine in Russia, and on the QiangGuang-1 generator in China, always successfully. Another of these is the drastic improvement in energy efficiency of pulsed-power systems, which started in early 1980s with Zucker's experiments at Naval Research Laboratory (NRL). Successful continuation of this approach was the Load Current Multiplier (LCM) proposed by Chuvatin in collaboration with Rudakov and Weber from NRL. The 100 ns LCM was integrated into the Zebra generator, which almost doubled the plasma load current, from 0.9 to 1.7 MA. The two above-mentioned innovative approaches were used in combination to produce a new compact hohlraum radiation source for ICF, as jointly proposed by SNL and UNR [Jones et al., Phys. Rev. Lett. 104, 125001 (2010)]. The first successful proof-of-the-principle experimental implementation of new hohlraum concept at university-scale generator Zebra/LCM is demonstrated. A numerical simulation capability with VisRaD code (from PRISM Co.) established at UNR allowed for the study of hohlraum coupling physics and provides the possibility of optimization of a new hohlraum. Future studies are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Superconductivity Induced in Iron Telluride Films by Low-temperature Oxygen Incorporation

We report superconductivity induced in films of the nonsuperconducting, antiferromagnetic parent material FeTe by low-temperature oxygen incorporation in a reversible manner. X-ray absorption shows that oxygen incorporation changes the nominal Fe valence state from 2+ in the nonsuperconducting state to mainly 3+ in the superconducting state. Thus superconductivity in O-doped FeTe occurs in a quite different charge and strain state than the more common FeTe{sub 1-x}Se{sub x}. This work also suggests a convenient path for conducting doping experiments in situ with many measurement techniques.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Muon Time-of-Flight studies for cosmic background rejection in the Short Baseline Near Detector

The Short-Baseline Neutrino (SBN) program at Fermilab is a cutting-edge project in experimental neutrino physics. One of its main goals is to systematically investigate the possible existence of eV-scale sterile neutrinos. This phenomenon has been hypothesized to explain some anomalies found in short-range experiments and, if confirmed, would imply a substantial extension of the Standard Model. SBN also offers an important opportunity to deepen the understanding of neutrino-nucleus interactions in the GeV energy range, through the use of Liquid Argon Time Projection Chambers (LArTPC) detectors, a fundamental technology also for the future DUNE experiment. The SBN experimental infrastructure consists of three detectors aligned along the Booster Neutrino Beamline at Fermilab. Among them, the detector located closest to the neutrino source, SBND (Short-Baseline Near Detector), positioned approximately 110 meters from the target, plays a key role in directly characterizing the initial neutrino flux. This allows for a direct comparison with the measurements from the far detector, ICARUS, located about 600 meters from the source, in order to search for potential signs of anomalous neutrino oscillations. My master's thesis focuses on the commissioning and characterization activities of the SBND detector, with particular reference to the Cosmic Ray Tagger (CRT). The CRT is a subsystem for identifying and rejecting events produced by cosmic rays, which constitute the main source of background for surface experiments like SBND. The activity began with the commissioning of the final components of the detector, as well as their validation to verify their correct functioning and signal acquisition. A central part of my work involved studying the veto efficiency of the CRT system, analyzing the rate of cosmic ray-induced events to quantify any loss of neutrino-induced events caused by cosmic background. This allowed for a more precise evaluation of the systematic impact of the CRT on the useful physics sample. A further phase of my analysis involved an in-depth study of the temporal correlation between the CRT signals and those acquired by the LArTPC's internal photodetector system, consisting of photomultiplier tubes and X-ARAPUCA devices. The objective is to explore the possibility of using combined temporal information as an additional criterion for discriminating between cosmic signals and signals genuinely due to neutrino interaction. Preliminary results indicate the presence of characteristic temporal signatures that could be exploited to improve event selection and increase the purity of the neutrino-induced sample. These methodologies will certainly contribute to the optimization of SBND analysis strategies and, more generally, to a better understanding of background mechanisms in next-generation LArTPC experiments.

Corallo, Annalea [Ferrara U.]↗

Burnup calculations for KIPT accelerator driven subcritical facility using Monte Carlo computer codes-MCB and MCNPX.

Argonne National Laboratory (ANL) of USA and Kharkov Institute of Physics and Technology (KIPT) of Ukraine have been collaborating on the conceptual design development of an electron accelerator driven subcritical (ADS) facility, using the KIPT electron accelerator. The neutron source of the subcritical assembly is generated from the interaction of 100 KW electron beam with a natural uranium target. The electron beam has a uniform spatial distribution and electron energy in the range of 100 to 200 MeV. The main functions of the subcritical assembly are the production of medical isotopes and the support of the Ukraine nuclear power industry. Neutron physics experiments and material structure analyses are planned using this facility. With the 100 KW electron beam power, the total thermal power of the facility is {approx}375 kW including the fission power of {approx}260 kW. The burnup of the fissile materials and the buildup of fission products reduce continuously the reactivity during the operation, which reduces the neutron flux level and consequently the facility performance. To preserve the neutron flux level during the operation, fuel assemblies should be added after long operating periods to compensate for the lost reactivity. This process requires accurate prediction of the fuel burnup, the decay behavior of the fission produces, and the introduced reactivity from adding fresh fuel assemblies. The recent developments of the Monte Carlo computer codes, the high speed capability of the computer processors, and the parallel computation techniques made it possible to perform three-dimensional detailed burnup simulations. A full detailed three-dimensional geometrical model is used for the burnup simulations with continuous energy nuclear data libraries for the transport calculations and 63-multigroup or one group cross sections libraries for the depletion calculations. Monte Carlo Computer code MCNPX and MCB are utilized for this study. MCNPX transports the electrons and the produced neutrons and photons but the current version of MCNPX doesn't support depletion/burnup calculation of the subcritical system with the generated neutron source from the target. MCB can perform neutron transport and burnup calculation for subcritical system using external neutron source, however it cannot perform electron transport calculations. To solve this problem, a hybrid procedure is developed by coupling these two computer codes. The user tally subroutine of MCNPX is developed and utilized to record the information of the each generated neutron from the photonuclear reactions resulted from the electron beam interactions. MCB reads the recorded information of each generated neutron thorough the user source subroutine. In this way, the neutron source generated by electron reactions could be utilized in MCB calculations, without the need for MCB to transport the electrons. Using the source subroutines, MCB could get the external neutron source, which is prepared by MCNPX, and perform depletion calculation for the driven subcritical facility.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Non-degenerate two photon absorption enhancement for laser dyes by precise lock-in detection

This study demonstrates a measurement system for a non-degenerate two-photon absorption (NDTPA) spectrum. The NDTPA light sources are a white light super continuum beam (WLSC, 500 ∼ 720 nm) and a fundamental beam (798 nm) from a Ti:Sapphire laser. A reliable broadband NDTPA spectrum is acquired in a single-shot detection procedure using a 128-channel lock-in amplifier. The NDTPA spectra for several common laser dyes are measured. Two photon absorption cross section enhancements are found in the experiment and validated by theoretical calculation for all of the chromophores.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Properties of water surface discharge at different pulse repetition rates

The properties of water surface discharge plasma for variety of pulse repetition rates are investigated. A magnetic pulse compression (MPC) pulsed power modulator able to deliver pulse repetition rates up to 1000 Hz, with 0.5 J per pulse energy output at 25 kV, was used as the pulsed power source. Positive pulse with a point-to-plane electrode configuration was used for the experiments. The concentration and production yield of hydrogen peroxide (H₂O₂) were quantitatively measured and orange II organic dye was treated, to evaluate the chemical properties of the discharge reactor. Experimental results show that the physical and chemical properties of water surface discharge are not influenced by pulse repetition rate, very different from those observed for under water discharge. The production yield of H₂O₂ and degradation rate per pulse of the dye did not significantly vary at different pulse repetition rates under a constant discharge mode on water surface. In addition, the solution temperature, pH, and conductivity for both water surface and underwater discharge reactors were measured to compare their plasma properties for different pulse repetition rates. The results confirm that surface discharge can be employed at high pulse repetition rates as a reliable and advantageous method for industrial and environmental decontamination applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗