Search NASA⌕ Search

SEARCH · Search NASA

Results for “Supportability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Enhancing Acidic Oxygen Evolution Activity by Supporting Iridium Electrocatalysts on Tantalum Carbide

For a high-performance proton exchange membrane water electrolyzer (PEMWE), acidic oxygen evolution reaction (OER) electrocatalysts require highly dispersed iridium oxide (IrO x ) nanoparticles. Although carbon-based materials have been explored as promising supports for IrO x nanoparticles, their limited stability under harsh oxidative and acidic PEMWE conditions remains a significant challenge. Here, in this study, we report the synthesis and in situ characterization of active and durable IrOx electrocatalysts supported on electrochemically stable and electrically conducting tantalum carbide (TaC). When applied in a PEMWE, the IrO x /TaC electrocatalyst achieves a cell voltage of 1.71 V at 1.0 A cm –2 , outperforming the commercial IrO 2 catalyst (1.82 V at 1.0 A cm –2 ). Furthermore, the IrO x /TaC catalyst maintains a stable operation for 200 h at 0.5 A cm –2 with a low degradation rate of 36 μV h –1 . Density functional theory calculations further confirm that Ir–O–Ta bond formation at the IrO x /TaC interface reduces the overpotential of the OER compared to IrO 2 . This study underscores the pivotal role of supporting IrO x over stable and conducting metal carbides, providing guidance for the design of advanced acidic OER catalysts.

58 GEOSCIENCES↗

Investigating Catalyst–Support Interactions To Improve the Hydrogen Evolution Reaction Activity of Thiomolybdate [Mo 3 S 13 ] 2– Nanoclusters

Molybdenum sulfides have been identified as promising materials for catalyzing the hydrogen evolution reaction (HER) in acid, with active edge sites that exhibit some of the highest turnover frequencies among nonpreciousmetal catalysts. The thiomolybdate [Mo 3 S 13 ] 2- nanocluster catalyst contains a structural motif that resembles the active site of MoS 2 and has been reported to be among the most active forms of molybdenum sulfide. Herein, we improve the activity of the [Mo 3 S 13 ] 2- catalysts through catalyst-support interactions. We synthesize [Mo 3 S 13 ] 2- on gold, silver, glassy carbon, and copper supports to demonstrate the ability to tune the hydrogen binding energy of [Mo 3 S 13 ] 2- using catalyst-support electronic interactions and optimize HER activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Highly Active Ceria-Supported Ru Catalyst for the Dry Reforming of Methane: In Situ Identification of Ru δ+ –Ce 3+ Interactions for Enhanced Conversion

The metal-oxide interaction changes the surface electronic states of catalysts deployed for chemical conversion, yet details of its influence on the catalytic performance under reaction conditions remain obscure. In this work, we report the high activity/stability of a ceria-supported Ru-nanocluster (<1 nm) catalyst during the dry reforming of methane. To elucidate the structure-reactivity relationship underlying the remarkable catalytic performance, the active structure and chemical speciation of the catalyst was characterized using in situ X-ray diffraction (XRD) and X-ray absorption fine structure (XAFS), while the surface chemistry and active intermediates were monitored by in situ ambient-pressure X-ray photoelectron spectroscopy (AP-XPS) and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). Methane activates on the catalyst surface at temperatures as low as 150 °C. Under reaction conditions, the existence of metal-support interactions tunes the electronic properties of the Ru nanoclusters, giving rise to a partially oxidized state of ruthenium stabilized by reduced ceria (Ru δ+ -CeO 2-x ) to sustain active chemistry, which is found to be very different from that of large Ru nanoparticles supported on ceria. The oxidation of surface carbon is also a crucial step for the completion of the catalytic cycle, and this is strongly correlated with the oxygen transfer governed by the Ru δ+ -CeO 2-x interactions at higher temperatures (>300 °C). Here, the possible reaction pathways and stable surface intermediates were identified using DRIFTS including ruthenium carbonyls, carboxylate species, and surface -OH groups, while polydentate carbonates may be plain spectators at the measured reaction conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modular Pd/Zeolite Composites Demonstrating the Key Role of Support Hydrophobic/Hydrophilic Character in Methane Catalytic Combustion

Complete catalytic oxidation of methane in the presence of steam at low temperatures (T < 400 °C) is a crucial reaction for emission control, yet it presents profound challenges. The activation of the strong C–H bond of methane at low temperature is difficult, and the water present in any realistic application poisons the active surface and promotes sintering of Pd particles during the reaction. Finding materials that can deliver high reaction rates while being more resistant to the presence of water is imperative for advancing several technological applications of natural gas-based systems. However, methods to fairly compare the activity of Pd catalysts (the most active metal for methane combustion) are needed in order to perform useful structure–property relationship studies. Here in this paper, we report a method to study how zeolite hydrophobicity affects the activity of Pd nanoparticles in the reaction, which led to a significant improvement in the water resistance. Mesoporous zeolites were synthesized starting from commercially available microporous zeolites. In this way, a variety of hierarchically porous zeolites, with different hydrophobic/hydrophilic character, were prepared. Preformed colloidal Pd nanoparticles could be deposited within mesostructured zeolites. This approach enabled the systematic study of key parameters such as zeolite framework, Al content, and the Pd loading while maintaining the same Pd particle size and structure for all the samples. Detailed catalytic studies revealed an optimum hydrophobic/hydrophilic character, and a promising steam-resistant catalyst, namely, 3.2 nm Pd particles supported on mesoporous zeolite beta or USY with a Si/Al ratio of 40, emerged from this multiparametric study with a T 50 of 355 °C and T 90 of 375 °C (where T 50 and T 90 are temperature values at which the samples reach 50% and 90% methane conversion, respectively) in steam-containing reaction conditions. Finally, we verified that the designed catalysts were stable by in-depth postcatalysis characterization and operando diffuse-reflectance infrared Fourier-transform spectroscopy (DRIFTS) analyses confirming that water adsorbs less strongly on the active PdO surface due to interaction with the zeolite acid sites. This method can be of general use to study how zeolite supports affect the reactivity of supported metals in several catalytic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effective Strategy for Improving Electrocatalyst Durability by Adhesive Immobilization of Catalyst Nanoparticles on Graphitic Carbon Supports

We have found that Ta-based additive films in our catalyst system act as adhesives, which improves electrocatalyst durability by immobilizing the catalyst Pt NPs on the graphitic Vulcan carbon support. Furthermore, we suggest that this can be a general design principle in producing higher-durability electrocatalysts on graphitic supports. By electrochemically probing the contributing roles of the tantalum oxide (Ta 2 O 5 ) and the polyphosphate (PPA) components in separate samples, we show that these combine to produce the observed improvement in activity and durability of our best catalyst, the tantalum polyphosphate (TaOPO 4 )-treated sample. To control variables for a valid electrochemical comparison, such as dissimilar catalyst particle size distributions and variations in surface coverage, four new catalyst samples closely matched in every way were prepared: (1) Pt/VC, (2) Pt/[PPA/VC], (3) Pt/[Ta 2 O 5 /VC], and (4) Pt[TaOPO 4 /VC]. We present HR-TEM/HAADF-STEM, EDS elemental mapping, PXRD, XPS, and electrochemical activity and durability evidence, showing that the TaOPO4 and Ta2O5 additives act as adhesives, effectively tethering the NPs to the VC graphitic support surface. Pt/[Ta 2 O 5 /VC] exhibited 3× better durability as compared with the Pt/VC control because of better catalyst nanoparticle immobilization by the Ta 2 O 5 adhesive. Pt[TaOPO 4 /VC] is the overall best performer, exhibiting both a high MA of 0.82 A mg Pt –1, the highest ORR MA after heat treatment, as well as 1.75× greater durability over the Pt/VC control.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spectroscopic characterization of alumina-supported bis(allyl)iridium complexes : site-isolation, reactivity, and decomposition studies.

The covalent attachment of tris(allyl)iridium to partially dehydroxylated ?-alumina is found to proceed via surface hydroxyl group protonation of one allyl ligand to form an immobilized bis(allyl)iridium moiety, (?AlO)Ir(allyl)2, as characterized by CP-MAS 13C NMR, inductively coupled plasma-mass spectrometry, and Ir L3 edge X-ray absorption spectroscopy. Extended X-ray absorption fine-structure (EXAFS) measurements taken on unsupported Ir(allyl)3 and several associated tertiary phosphine addition complexes suggest that the ?3-allyl ligands generally account for an Ir-C coordination number of 2 rather than 3, with an average Ir-C distance of 2.16 A. Using this knowledge, combined EXAFS and X-ray absorption near-edge structure studies reveal that a small amount of Ir0 is also formed upon reaction of Ir(allyl)3 with the surface. It was found that the addition of either 2,6-dimethylphenyl isocyanide or carbon monoxide to the supported complex allows spectroscopic identification of the supported bis(allyl)iridium complexes, (?AlO)Ir(allyl)2(CNAr) [Ar = 2,6-(CH3)2C6H4] and (?AlO)Ir(allyl)2(CO)2, respectively. Although samples of the supported bis(allyl)iridium complex are active for the dehydrogenation of cyclohexane to benzene at temperatures between 180 and 220C, in situ temperature-programmed reaction XAFS and continuous-flow reactor studies suggest that Ir0 nanoparticles, rather than a well-defined Ir3+ complex, are responsible for the observed activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preparation and SO{sub 2} sorption/desorption behavior of an Ionic liquid supported on porous silica particles

The ionic liquid 1,1,3,3-tetramethylguanidinium lactate (TMGL) was supported onto porous silica particles via a facile impregnation-vaporization method. The TMGL-supported particles gave high porosity and large specific surface area. The SO{sub 2} sorption/desorption properties of the silica-supported TMGL (TMGL-SiO{sub 2}) were evaluated, and high SO{sub 2} sorption capacity and rate were achieved. Its capacity reached 0.6 g SO{sub 2}/g TMGL in 15-30 min with pure SO{sub 2} gas and 0.15 g SO{sub 2}/g TMGL in 17 h with a N{sub 2}/SO{sub 2} mixture gas that contained 2160 ppm SO{sub 2}. The SO{sub 2} concentration was reduced to 12.6 ppm after sorption. The TMGL-SiO{sub 2} system could be reused for many sorption/desorption cycles without change in its capacity. It was also characterized by good mechanical strength and thermal stability at temperature up to 130{sup o}C. The SO{sub 2} sorbent system appears to be useful in gas desulfurization.

01 COAL, LIGNITE, AND PEAT↗

Manganese Triazacyclononane Oxidation Catalysts Grafted under Reaction Conditions on Solid Co-Catalytic Supports

Manganese complexes of 1,4,7-trimethyl-1,4,7-triazacyclononane (tmtacn) are highly active and selective alkene oxidation catalysts with aqueous H{sub 2}O{sub 2}. Here, carboxylic acid-functionalized SiO{sub 2} simultaneously immobilizes and activates these complexes under oxidation reaction conditions. H{sub 2}O{sub 2} and the functionalized support are both necessary to transform the inactive [(tmtacn)Mn{sup IV}({mu}-O)3Mn{sup IV}(tmtacn)]{sup 2+} into the active, dicarboxylate-bridged [(tmtacn)Mn{sup III}({mu}-O)({mu}-RCOO){sub 2}Mn{sup III}(tmtacn)]{sup 2+}. This transformation is assigned on the basis of comparison of diffuse reflectance UV-visible spectra to known soluble models, assignment of oxidation state by Mn K-edge X-ray absorption near-edge spectroscopy, the dependence of rates on the acid/Mn ratios, and comparison of the surface structures derived from density functional theory with extended X-ray absorption fine structure. Productivity in cis-cyclooctene oxidation to epoxide and cis-diol with 2-10 equiv of solid cocatalytic supports is superior to that obtained with analogous soluble valeric acid cocatalysts, which require 1000-fold excess to reach similar levels at comparable times. Cyclooctene oxidation rates are near first order in H{sub 2}O{sub 2} and near zero order in all other species, including H{sub 2}O. These observations are consistent with a mechanism of substrate oxidation following rate-limiting H{sub 2}O{sub 2} activation on the hydrated, supported complex. This general mechanism and the observed alkene oxidation activation energy of 38 {+-} 6 kJ/mol are comparable to H{sub 2}O{sub 2} activation by related soluble catalysts. Undesired decomposition of H{sub 2}O{sub 2} is not a limiting factor for these solid catalysts, and as such, productivity remains high up to 25 C and initial H{sub 2}O{sub 2} concentration of 0.5 M, increasing reactor throughput. These results show that immobilized carboxylic acids can be utilized and understood like traditional carboxylic acids to activate non-heme oxidation catalysts while enabling higher throughput and providing the separation and handling benefits of a solid catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Epitaxial and Strong Support Interactions between Pt and LaFeO 3 Films Stabilize Pt Dispersion

The ability to stabilize very small Pt crystallites in supported-metal catalysts following harsh treatments is an important industrial problem. Herein, we demonstrate that Pt particles can be maintained in the 1- to 2-nm range following multiple oxidation and reduction cycles at 1073 K when the particles are supported on 0.5-nm LaFeO 3 films that have been deposited onto MgAl 2 O 4 using atomic layer deposition (ALD). Characterization by Scanning Transmission Electron Microscopy (STEM) suggest that, when the catalyst is oxidized at 1073 K, the Pt crystallites are oriented with respect to the underlying LaFeO 3 . X-Ray Absorption Spectroscopy (XAS) also shows evidence for changes in the Pt environment. CO-oxidation rates for the reduced catalyst remain unchanged after five redox cycles at 1073 K. Epitaxial growth of Pt clusters and the consequent strong metal-support interaction between Pt and LaFeO 3 are indicated to be prime reasons for the enhanced catalytic performances.

36 MATERIALS SCIENCE↗

Silver Adsorption on Calcium Niobate(001) Nanosheets: Calorimetric Energies That Explain Sinter-Resistant Support

Metal nanoparticles deposited on oxide supports are essential to many technologies, including catalysts, fuel cells and electronics. Therefore, understanding the chemical bonding strength between metal nanoparticles and oxide surfaces is of great interest. The adsorption energetics, adhesion energy and adsorbate structure of Ag on dehydrated HCa 2 Nb 3 O 10 (001) nanosheets at 300 K have been studied using metal adsorption calorimetry and surface spectroscopies. These dehydrated (“dh”) calcium niobate nanosheets “(dh-HCa 2 Nb 3 O 10 (001))” have stoichiometry Ca 4 Nb 6 O 19 . They impart unusual stability to metal nanoparticles when used as catalyst supports and are easy-to-prepare by Langmuir-Blodgett (LB) techniques, highly ordered, and essentially single-crystal surfaces of mixed oxides with a huge ratio of terrace to edge sites. Below monolayer coverage, Ag grows on dh-HCa 2 Nb 3 O 10 (001) as 2D islands of thickness ~2 layers. The differential heat of Ag adsorption is initially ~303 kJ/mol, increasing slowly to ~338 kJ/mol by 0.8 ML. At higher coverages, Ag atoms mainly add on top of these 2D islands, growing 3D nanoparticles of increasing thickness, as the heat decreases asymptotically towards silver’s heat of sublimation (285 kJ/mol). The adhesion energy of Ag(s) to this Ca niobate surface is estimated to be 4.33 J/m 2 , larger than on any oxide surface previously measured. This explains the sinter resistance reported for metal nanoparticles on this support. Electron transfer from Ag into the calcium niobate is also measured. Furthermore, these results demonstrate an easy way to do singlecrystal-type surface science studies - and especially thermochemical measurements - on the complex surfaces of mixed oxides: using LB-deposited perovskite nanosheets and ultrahigh vacuum annealing in O 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Silicon Nitride Surface Enabled Propane Dehydrogenation Catalyzed by Supported Organozirconium

Mesoporous silicon nitride (Si 3 N 4 ) is a nontraditional support for the chemisorption of organometallic complexes with the potential for enhancing catalytic activity through features such as the increased Lewis basicity of nitrogen for heterolytic bond activation, increased ligand donor strength, and metal–ligand orbital overlap. In this report tetrabenzyl zirconium (ZrBn 4 ) was chemisorbed on Si 3 N 4 , and the resulting supported organometallic species was characterized by Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS), Dynamic Nuclear Polarization-enhanced Solid State Nuclear Magnetic Resonance (DNP-SSNMR), and X-ray Absorption Spectroscopy (XAS). Based on the hypothesis that the nitride might enable facile heterolytic C–H bond activation along the Zr–N bond, this material was found to be a highly active (1.53 mol propene mol Zr –1 h –1 at 450 °C) and selective (99% to propylene) catalyst for propane dehydrogenation. In contrast, the homologous silica supported complex exhibited negligible activity under these conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Visualizing Size-Dependent Dynamics of CeO 2-δ {100}-Supported CoO x Nanoparticles Under CO 2 Hydrogenation Conditions

Carbon dioxide is a major greenhouse gas. In order to optimize processes focused on its chemical valorization, one needs detailed information about the effects of CO 2 and/or CO 2 /H 2 mixtures on the structure and morphology of metal/oxide catalysts. Here, in this study, the evolution of a catalyst with cobalt supported on CeO 2 -cube nanostructures under CO 2 hydrogenation conditions was investigated by using a set of in situ characterization techniques (X-ray absorption fine structure, X-ray diffraction, diffuse reflectance infrared Fourier transform spectroscopy, and environmental transmission electron microscopy (TEM)). The {100} facets of the ceria support displayed an unexpectedly high stability due to strong interactions with the aggregates of cobalt oxide. A significant influence of interfacial bonding between CoO x and CeO 2-δ {100} is evident through a clear preference in the orientation of CoO x nanoparticles (NPs) with respect to the substrate. For initially reduced Co/CeO 2 -cube nanostructures, a kinetically controlled oxidation of cobalt upon the introduction of CO 2 was observed during the early stages of CO 2 hydrogenation. Environmental TEM revealed the size-dependent morphological behavior of cobalt oxide NPs due to strong interactions with the CeO 2 {100} surface. When the environment was switched from H 2 to a mixture of H 2 and CO 2 at 250 °C, small CoO x NPs (in the largest dimension < 2.5 nm) rapidly transformed from a pyramidal three-dimensional (3D) form to a planar, monatomic layer attached to the concurrently oxidized CeO 2-δ {100} surface. This maximizes the number of sites available for the binding of CO 2 or reaction intermediates. The shape transformation reflected the oxophilic character of cobalt and strong metal–support interactions. The removal of CO 2 from the gas phase led to a reduction of the cobalt oxide NPs by hydrogen and a reversible two-dimensional → 3D transformation. In contrast, no significant morphological changes, apart from further oxidation, were observed for big CoO x NPs (in the largest dimension > 3 nm). These trends are not seen for nanoparticles of noble metals. The observed morphological and structural changes in the small CoO x NPs affected the stability of reaction intermediates and modified the selectivity of the CoO x /CeO 2 catalyst system for methane production.

36 MATERIALS SCIENCE↗

Fine-Tuning the Activity of Metal–Organic Framework Supported Cobalt Catalysts for the Oxidative Dehydrogenation of Propane

Few-atom cobalt-oxide clusters, when dispersed on a Zr-based metal–organic framework (MOF) NU-1000, have previously been shown to be active for the oxidative dehydrogenation (ODH) of propane at low temperatures (< 230 °C), affording a selective and stable propene production catalyst. In our current work, a series of promoter ions with varying Lewis acidity, including Ni(II), Zn(II), Al(III), Ti(IV) and Mo(VI), are anchored as metal-oxide,hydroxide clusters to NU-1000 via SIM (solvothermal deposition within MOFs–specifically the nodes) followed by incorporation of Co(II) ions via vapor-phase AIM (atomic layer deposition (ALD) in MOFs). This process yields a series of NU-1000-supported bimetallic-oxo,hydroxo,aqua clusters. Using difference envelope density (DED) analyses, the spatial locations of the promoter ions and catalytic cobalt ions are determined. For all samples the SIM-anchored promoter ions are sited between pairs of Zr 6 nodes along the MOF c-axis (channel-aligned axis) whereas the location of the AIM-anchored cobalt ions varies depending on the identity of promoter metal ion. With Ni(II)-, Al(III)-, or Ti(IV)-containing clusters as promoters, the oxy-cobalt species are sited atop the promoter sites; with Mo(VI) they grow exclusively on the MOF nodes sites (hexa-Zr(IV)- oxo,hydroxo,aqua units); with Zn(II) they grow on both the node and promoter. The NU-1000- supported bimetallic-oxide clusters are active for propane ODH after thermal activation under O 2 to open a cobalt coordination site and to oxidize Co(II) to Co(III), as evidenced by operando Xray absorption spectroscopy at the Co K-edge. The cobalt component is exclusively responsible for the observed catalysis. In accord with the decreasing Lewis acidity of the promoter ion, catalytic activity increases in the order: Mo(VI)<Ti(IV)<Al(III)<Zn(II)<Ni(II). The finding is attributed to increasing ease of formation Co(III)-O• species and stabilization of a cobalt(III)- oxyl/propane transition state as the Lewis acidity of the promoter ions decreases. (The promoterfree catalyst is sited on the oxy-Zr(IV) node of the MOF and is inferior catalytically to the strongly promoted versions of the catalyst.) The relative Lewis acidities of the promoters are inferred from the initial pKa values of aqua complexes of the corresponding single metal ions. Departures from the (ODH-rate)/(promoter-pKa) correlation are paralleled by differences in cobalt catalyst siting or structure. The combined results point to an increasing ability to fine-tune, with close to atomic specificity, the structure-dependent activity of MOF-supported heterogeneous catalysts for gas phase chemical reactions. When coupled with mechanistic studies–computational or experimental–this ability may translate into informed prediction of improved catalysts for propane ODH and other chemical reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Low-Temperature Restructuring of CeO 2 -Supported Ru Nanoparticles Determines Selectivity in CO 2 Catalytic Reduction

CO 2 reduction to higher value products is a promising way to produce fuels and key chemical building blocks while reducing CO 2 emissions. The reaction at atmospheric pressure mainly yields CH 4 via methanation and CO via the reverse water-gas shift (RWGS) reaction. Describing catalyst features that control the selectivity of these two pathways is important to determine the formation of specific products. At the same time, identification of morphological changes occurring to catalysts under reaction conditions can be crucial to tune their catalytic performance. In this contribution we investigate the dependency of selectivity for CO 2 reduction on the size of Ru nanoparticles (NPs) and on support. We find that even at rather low temperatures (210 °C), oxidative pretreatment induces redispersion of Ru NPs supported on CeO 2 and leads to a complete switch in the performance of this material from a well-known selective methanation catalyst to an active and selective RWGS catalyst. By utilizing in situ X-ray absorption spectroscopy, we demonstrate that the low-temperature redispersion process occurs via decomposition of the metal oxide phase with size-dependent kinetics, producing stable single-site RuO x /CeO 2 species strongly bound to the CeO 2 support that are remarkably selective for CO production. Furthermore, these results show that reaction selectivity can be heavily dependent on catalyst structure and that structural changes of the catalyst can occur even at low temperatures and can go unseen in materials with less defined structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Platinum Supported on NbRuyOz as Electrocatalyst for Ethanol Oxidation in Acid and Alkaline Fuel Cells

Platinum supported on a mixed metal oxide, NbRu{sub y}O{sub z} (8Nb:1Ru), was evaluated as an electrocatalyst for the ethanol oxidation reaction (EOR) in 0.1 M HClO{sub 4} and 1 M KOH. The support was synthesized from a liquid precursor solution of metal chlorides that was aerosolized and thermally decomposed into a powder via the spray pyrolysis (SP) process. Two samples were of primary interest: 30%Pt deposited onto the support by dry impregnation and 60%Pt as part of the precursor solution that underwent in situ SP Pt dispersion. TEM, SEM, and XRD were used to confirm morphology and deposition of Pt. XPS and XAS studies confirmed elemental distribution and oxidation state of Pt catalyst. In situ IRRAS studies in 0.1 M HClO{sub 4} show that these electrocatalysts are capable of facilitating the complete oxidation pathway of EOR, involving scission of the C-C bond and CO oxidation.

30 DIRECT ENERGY CONVERSION↗

A Theoretical Study of Methanol Oxidation Catalyzed by Isolated Vanadia Clusters Supported on the (101) Surface of Anatase

A theoretical model has been developed for describing isolated vanadate species dispersed on the (101) surface of anatase that takes into account the equilibration of the supported species with gas-phase oxygen. The lowest energy of the combined solid and gas phases identifies the VOx species with the optimal structure and composition. This model of VOx species supported on the surface of anatase is then used to analyze the reaction path for methanol oxidation to formaldehyde. The chemisorption of methanol is found to proceed preferentially by addition across a V-O-Ti bond to form V-OCH3 and Ti-OH species. The rate-limiting step for the formation of formaldehyde takes place via the transfer of a hydrogen atom from V-OCH3 bound to an oxygen atom bridging two Ti atoms, i.e., a Ti-O-Ti group located adjacent to the supported vanadate species. This step is found to have the lowest apparent activation energy of all pathways explored for the formation of formaldehyde.

Environmental Molecular Sciences Laboratory↗

State of Supported Pd during Catalysis in Water

In operando X-ray absorption was used to measure the structure and chemical state of supported Pd nanoparticles with 3 -10 nm diameter in contact with H2 saturated water at 298-473 K. The Pd-Pd distances determined were consistent with the presence of subsurface hydrogen, i.e., longer than those measured by others for bare, reduced Pd particles, and within the range of distances for Pd hydrides. During the Pd-catalyzed hydrogenation of phenol, cyclohexanone, cyclohexanol or cyclohexene in the presence of water, the Pd nanoparticles exhibited a lengthening of the Pd-Pd bond that we attribute to a change in the concentration of sorbed H related to the steady state of H at the surface of the Pd particles. This steady state is established by all reactions involving H2, i.e., the sorption/desorption into the bulk, the sorption at the surface, and the reaction with adsorbed unsaturated reactants. Thus, first insight into the chemical state of Pd and the H/Pd ratio during catalysis in water is provided. The Pd particles did not change upon their exposure to water or reactants; nor did the spectra show any effect from the interaction of the Pd particles with various supports. The experimental results are consistent with ab initio molecular dynamic simulations, which indicate that Pd-water interactions are relatively weak for Pd metal and that these interactions become even weaker, when hydrogen is incorporated into the metal particles. This work was supported by the US Department of Energy (DOE), Office of Basic Energy Sciences (BES), Division of Chemical Sciences, Geosciences & Biosciences. Pacific Northwest National Laboratory is a multi-program national laboratory operated for DOE by Battelle through Contract DE-AC05-76RL01830.

hydrodeoxygenation↗

Nearly Uniform Decaosmium Clusters Supported on MgO: Characterization by X-ray Absorption Spectroscopy and Scanning Transmission Electron Microscopy

Samples containing small, nearly uniform clusters of a heavy metal, Os, were prepared on a high-area porous support consisting of light atoms, MgO, to provide an opportunity for a critical assessment of estimates of cluster size determined by extended X-ray absorption fine structure (EXAFS) spectroscopy and high-angle annular dark field scanning transmission electron microscopy (HAADF-STEM). Supported carbonyl clusters approximated as decaosmium were prepared by reductive carbonylation of adsorbed Os3(CO)12 at 548 K and 1 bar. Infrared (IR) spectra of the clusters resemble those attributed in earlier work to supported clusters similar to [Os10C(CO)24]2-, consistent with the EXAFS data. The spectra indicate a molar yield of decaosmium carbonyl clusters of about 65-70%. As these clusters were treated in flowing H2, they were partially decarbonylated, as shown by IR and EXAFS spectra. The rms (root-mean-square) radii of the undecarbonylated and partially decarbonylated clusters were found by HAADF-STEM to be 3.11 {+-} 0.09 and 3.06 {+-} 0.05 A, respectively, and the close agreement between these values is consistent with the inference that the cluster frame was essentially the same in each. The average rms radius of the undecarbonylated clusters, estimated on the basis of EXAFS data, was 2.94 {+-} 0.07 A, calculated on the basis of the assumption that the osmium frame matched that of [Os10C(CO)24]2-. EXAFS analysis of the data characterizing the partially decarbonylated sample, aided by the STEM results, showed, consistent with the STEM results, that the partial decarbonylation did not lead to a significant change in the rms radius of the metal frame.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗