Search NASA⌕ Search

SEARCH · Search NASA

Results for “TiO2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Hydrogenolysis of n -eicosane over Ru-based catalysts in a continuous flow reactor

The hydrogenolysis of n-eicosane (C 20 H 42 ) was studied under differential conditions over Ru-based catalysts including Ru/SiO 2 , Ru/TiO 2 , and Ru/SBA-15, using a continuous flow reactor that was specially designed for large hydrocarbon reactants that are solids at room temperature. Similar rates and product distributions were obtained for Ru/SiO 2 and Ru/SBA-15 at 433 K, with the most abundant products being C 1 and C 19 hydrocarbons and smaller amounts of C 8 to C 18 also being produced. The higher yield of C 1 and C 19 indicates that cleavage of the terminal C-C bond is somewhat more facile than an internal C-C bond. At 473 K the product distribution shifted to mostly C 1 suggesting that, at this temperature, the adsorbed alkyl fragments undergo complete C-C bond scission prior to desorbing. Here, the conversion was also found to be inversely proportional to the H 2 pressure. Similar results were obtained for Ru/TiO 2 except this catalyst was found to be less active than both Ru/SiO 2 and Ru/SBA-15.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Room temperature slot-die coated perovskite layer modified with sulfonyl-γ-AApeptide for high performance perovskite solar devices

Perovskite solar cells (PSCs) exhibited remarkable progress for small aperture area cells, however, the performance of its counterpart, large aperture area cells, lags due to non-uniform and defective perovskite layers. Here, we fabricate reproducible large area homogeneous perovskite films at room temperature and without controlling humidity (up to 40 % RH) with a slot die coater on a c-TiO 2 layer deposited using a large area chemical bath. A new artificial peptide – sulfonyl-γ-AApeptide (F-GLU-S) was employed to modify the slot-die coated perovskite surface, grain boundaries and electronic defects. The multi-functional F-GLU-S with carbonyl, carboxyl, sulfonyl, benzene, and chloro groups was capable of strongly interacting with the perovskite layer and repairing the uncoordinated Pb 2+ ions and halide vacancies. As a result, both the electron and hole densities of defects were significantly suppressed; consequently, the non-radiative recombination was effectively suppressed for the modified device which can be explicitly seen in the device performance where both V oc and FF of the modified device improved considerably. Therefore, F-GLU-S modified slot-die coated MAPbI 3 – based devices demonstrated outstanding performance of 21.44 % PCE with a V oc of 1.13 V, J sc of 24.64 cm –2 , and FF 76.99 %. Furthermore, F-GLU-S passivation impeded the infiltration of moisture and oxygen due to its hydrophobic nature and defect repair potential. As a result, the modified device retained above 92 % of its original PCE after 720 h in air (room temperature and 40–60 % RH).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An investigation of the reduction of TiO 2 by Mg in H 2 atmosphere

Hydrogen assisted magnesiothermic reduction (HAMR) of TiO 2 is a promising new process developed recently to produce Ti metal with low cost and less energy consumption. Here this work focuses on the understanding and optimization of the reduction process to control the quality of the reduced product. TiO 2 precursor particles with different relative densities were prepared, and the effects of the relative densities on reduction by Mg in H 2 were studied. The changes of oxygen contents vs. reduction time at various temperatures were investigated. The phase transformations during the reduction were analyzed both theoretically and experimentally. The relationship between the morphology of the reduced products and the relative densities of the TiO 2 precursors was analyzed by SEM characterization and the likely reason for the morphology evolution was discussed.

42 ENGINEERING↗

Advantages of tandem versus simultaneous operation: The case of isomerization/hydrogenation of terpinolene epoxide to Terpinen-4-ol using a Ni/TiO 2 -SiO 2 bifunctional catalyst

The conversion of terpinolene epoxide to terpinen-4-ol is a desirable chemical transformation for the production of a valuable intermediate. Here this report describes a one-pot, two-step system for the reaction that uses a bifunctional Ni/TiO 2 -SiO 2 catalyst with isomerization and hydrogenation capabilities. The TiO 2 -SiO 2 serves to isomerize the starting epoxide. The Ni component works to hydrogenate the allylic double bond. The tandem system achieves a high 64% yield of terpinen-4-ol. X-ray diffraction analysis showed that TiO 2 -SiO 2 was a mixed binary oxide, and Fourier transform infrared spectroscopy of adsorbed pyridine suggested that acid sites were mainly Lewis acid sites. Electron microscopy showed that the Ni/TiO 2 -SiO 2 catalyst consisted of spherical particles comprising a titanosilicate phase with highly dispersed zero-valent Ni or anatase on the surface. Additionally, there was strong interaction between Ni and the TiO 2 -SiO 2 mixed oxides. Control kinetic experiments demonstrated that the tandem use of the catalysts was more effective than simultaneous operation.

42 ENGINEERING↗

Dynamics of charge at water-to-semiconductor interface: Case study of wet [0 0 1] anatase TiO 2 nanowire

Here, the behavior of water molecules on the surfaces of the TiO 2 nanowire grown in [0 0 1] direction has been investigated by combining theoretical calculations and experiments. Calculated UV–visible absorption spectra reproduce the main features of the experimental spectra. Computations predict that a photoexcitation followed by a sequence of relaxation events results in photoluminescence across the gap. TiO 2 nanowires in vacuum and aqueous environment exhibit different dynamics of photo-excited charge carriers. In water, computed relaxation of electrons (holes) is approximately 2 (4) times faster compared with vacuum environment. Faster relaxation of holes vs. electrons and specific spatial localization of holes result to formation of long lived charge transfer excitation with positive charge at the surface of the nanowire. Comparison of relaxation process in TiO 2 /water interfaces focusing on different surfaces and nanostructures has potential in identifying structural characteristics of TiO 2 materials important for efficient photo-electrochemical water splitting.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A hybrid optimization algorithm to explore atomic configurations of TiO 2 nanoparticles

Here in this paper we present a hybrid algorithm comprised of differential evolution, coupled with the Broyden–Fletcher–Goldfarb–Shanno quasi-Newton optimization algorithm, for the purpose of identifying a broad range of (meta)stable Ti n O 2 n nanoparticles, as an example system, described by Buckingham interatomic potential. The potential and its gradient are modified to be piece-wise continuous to enable use of these continuous-domain, unconstrained algorithms, thereby improving compatibility. To measure computational effectiveness a regression on known structures is used. This approach defines effectiveness as the ability of an algorithm to produce a set of structures whose energy distribution follows the regression as the number of Ti n O 2n increases such that the shape of the distribution is consistent with the algorithm’s stated goals. Our calculation demonstrates that the hybrid algorithm finds global minimum configurations more effectively than the differential evolution algorithms, widely employed in the field of materials science. Specifically, the hybrid algorithm is shown to reproduce the global minimum energy structures reported in the literature up to n = 5, and retains good agreement with the regression up to n = 25. For 25 < n < 100, where literature structures are unavailable, the hybrid effectively obtains structures that are in lower energies per TiO 2 unit as the system size increases.

36 MATERIALS SCIENCE↗

Performance of biologically inspired algorithms tuned on TiO 2 nanoparticle benchmark system

Biologically inspired optimization algorithms (BIOA), such as particle swarm optimization (PSO) and differential evolution (DE), are often applied to a specific problem with the tacit assumptions that each algorithm will have a unique set of “ideal” tuning parameters that provide “best” performance, and that, once tuned, two different optimization algorithms ought to exhibit distinct performance. This work tests those assumptions by systematically comparing PSO and DE applied to identify stable and metastable configurations of a benchmark system, a titania dimer Ti 2 O 4 , whose energy is described by a modified Matsui-Akaogi pairwise potential. The hypotheses (H) are formally expressed as: (H1) for both PSO and DE there exists a unique, optimal set of tuning parameters that maximize its performance on a given problem; (H2) when running two different BIOAs, one algorithm must demonstrate superior performance over the other. By identifying and studying an approximate Pareto-optimal set of tuning parameters for DE and PSO, H1 is shown to be strictly false for DE, and tentatively false for PSO, while H2 is shown to be false with respect to certain statistics. Here, we further investigate the correlations between key tuning parameters and algorithm performance. Our conclusion may be implemented to further optimize and develop BIOAs applied to materials systems.

36 MATERIALS SCIENCE↗

Li-Ion Batteries from LiFePO4 Cathode and Anatase/Graphene Composite Anode for Stationary Energy Storage

Li-ion batteries based on LiFePO4 cathode and anatase TiO2/graphene anode were investigated for possible stationary energy storage application. Fine-structured LiFePO4 was synthesized by novel molten surfactant approach. Anatase TiO2/graphene nanocomposite was prepared via self assembly method. The full cell that operated at flat 1.6V demonstrated negligible fade after more than 700 cycles. The LiFePO4/TiO2 combination Li-ion battery is inexpensive, environmentally benign, safe and stable. Therefore, it can be practically applied as stationary energy storage for renewable power sources.

25 ENERGY STORAGE↗

Amorphous and crystalline TiO 2 nanoparticle negative electrodes for sodium-ion batteries

Titanium dioxide (TiO 2 ) is a promising negative electrode for sodium ion batteries (SIBS). Although TiO 2 materials with amorphous (A-TiO 2 ) and single-phase crystalline structures (C-TiO 2 ) have been separately explored, the study to compare the fundamental electrochemistry of A-TiO 2 and C-TiO 2 is limited. In this work, we investigated A-TiO 2 and C-TiO 2 nanoparticles with identical chemical composition and morphology. C-TiO 2 exhibits enhanced electrochemical performance than A-TiO 2 in terms of rate capability and cycle life. Cyclic voltammetry (CV) analysis suggests reversible Na ion insertion/extraction in C-TiO 2 . However, such process is irreversible in the case of A-TiO 2 . The charge storage mechanisms in both samples were studied to show that diffusion-controlled intercalation process becomes significant in C-TiO 2 sample. The C-TiO 2 sample has a better Na + diffusivity measured through the galvanostatic intermittent titration technique (GITT) compared to A-TiO 2 , which corroborates well with the rate capability study. Furthermore, the evolution of local structure of the TiO 2 samples was analyzed by ex situ pair distribution function (PDF) to understand the variation in electrochemical properties. In conclusion, it reveals that the corner-shared Ti-Ti distance along Na ion diffusion pathway increases with the increase of crystallinity, leading to the expanded diffusion channels and therefore more active sites and faster diffusion.

25 ENERGY STORAGE↗

Study of the photocatalytic activity of Fe 3+ , Cr 3+ , La 3+ and Eu 3+ single-doped and co-doped TiO 2 catalysts produced by aqueous sol-gel processing

An aqueous sol-gel process, previously developed for producing undoped and Cu 2+ , Ni 2+ , Zn 2+ or Pb 2+ doped TiO 2 photocatalysts with remarkably high photocatalytic activity without requiring any calcination step, has been adapted to produce Fe 3+ , Cr 3+ , La 3+ or Eu 3+ single-doped TiO 2 photocatalysts as well as La3+-Fe3+ and Eu3+-Fe3+ co-doped TiO 2 catalysts. The physicochemical properties of the obtained catalysts have been characterized using a suite of complementary techniques, including ICP-AES, XRD, UV-Vis spectroscopy, nitrogen adsorption-desorption and Fe-57 M ssbauer. The active crystalline phase is obtained without requiring any calcination step and all the different catalysts are composed of nanocrystallites of anatase with a size of 6-7 nm and a high specific surface area varying from 181 to 298 m 2 g -1 . In this study, the effect of the NO 3 :Ti(IV) mole ratio used to induce the peptisation reaction during the synthesis has been studied and the results revealed that this ratio can influence significantly the textural properties of the resulting catalyst. A screening of the photocatalytic activity of the undoped and Fe 3+ , Cr 3+ , La 3+ or Eu 3+ single-doped and co-doped photocatalysts has been performed by evaluating the degradation of 4-nitrophenol under UV-Visible light (330 nm < < 800 nm). This study suggests that the photocatalytic activity is significantly influenced by the dopant nature and content with an optimal dopant content being observed in the case of Fe 3+ or La 3+ single-doped as well as in the case of La 3+ -Fe 3+ and Eu 3+ -Fe 3+ co-doped catalysts. In the case of Cr 3+ single-doped catalysts, a detrimental effect of the dopant on the photocatalytic degradation of 4-nitrophenol has been observed while no significant influence of the dopant has been detected in the case of Eu 3+ single-doped catalysts. In conclusion, the role of the different dopants in modulating the photocatalytic activity is discussed.

36 MATERIALS SCIENCE↗

Calorimetric metal vapor adsorption energies for characterizing industrial catalyst support materials

Many important catalysts and electro-catalysts for energy and environmental technologies involve late transition metal atoms and nanoparticles dispersed across the surface of high-surface-area support materials, for example, oxide nanoparticles. The surface reactivity and long-term stability against deactivation of these materials depends strongly on the strength of bonding of the metal atom and nanoparticles to the support surface. Here, we introduce a novel calorimetry method that implements a LiTaO 3 crystal for heat detection and extends metal adsorption calorimetry to surfaces of nanomaterials that are deposited from liquid solutions, as is typical when preparing industrial catalyst supports. This allows one to measure the strength of metal atom bonding and the adhesion energy of metal nanoparticles to clean surfaces of technologically relevant catalyst supports. We demonstrate that here by measuring the heat of Ag vapor adsorption onto the clean surfaces of high-surface-area TiO 2 anatase powdered support materials (i.e., 5-nm-diameter nanoparticles). These heats of adsorption show a pulse-to-pulse standard deviation of only 9.3 kJ/mol (3.3%) for pulses containing only 1% of a monolayer of Ag vapor, with potential for a 5-fold reduction in noise if used with another metal evaporator. The calorimeter was also proven to work well measuring heats of Ag adsorption on calcium niobate(001) nanosheets deposited as thin films from liquid solution. Here, this calorimeter opens up the possibility of using metal adsorption calorimetry to screen catalyst support materials for the strengths with which they bind metal atoms and metal nanoparticles, offering new opportunities to discover better support materials or for basic scientific study of structure / function relationships with respect to metal / support bond energies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and photocatalytic activity of TiO 2 nanowires in the degradation of p-aminobenzoic acid: A comparative study with a commercial catalyst

The photocatalytic degradation of p-aminobenzoic acid was studied using TiO 2 nanowires as the catalyst synthesized through a hydrothermal procedure. The as-synthesized TiO 2 nanowires were fully characterized by SEM, TEM, XRD and Raman with a very high surface area of 512 m 2 g -1 . In addition, the photocatalytic degradation of p-aminobenzoic acid was carried out under 180 min of constant radiation and the results were compared with P25 as commercial catalyst. Optimal experimental conditions were determined for TiO 2 nanowires with a catalyst dosage of 1.0 g L -1 under acidic conditions with a 20 μM p-aminobenzoic acid solution obtaining 95% of degradation. Under similar experimental conditions comparative studies were performed obtaining 98% of degradation when P25 is employed. Finally, in both systems, a pseudo first order reaction was found to provide the best correlations, with constant rates of 2.0 x 10 -2 min -1 and 2.4 x 10 -2 min -1 for TiO 2 nanowires and P25, respectively.

36 MATERIALS SCIENCE↗

Selective Brookite Polymorph Formation Related to the Amorphous Precursor State in TiO 2 Thin Films

A wide variety of brookite TiO 2 synthesis methods have been published over the past several decades, but few studies discuss the underlying mechanism that stabilizes brookite over its stable counterparts, rutile and anatase. Here in this study, we investigate of the effect of pulsed laser deposition parameters on the as-deposited amorphous precursor titania thin films, which subsequently crystallize into stable and metastable TiO 2 polymorphs upon annealing. We find that oxygen pressure in the deposition chamber strongly influences the non-equilibrium state of the amorphous precursor, which ultimately allows for selective polymorph formation. Rutile forms as the dominant phase at low pO 2 < 0.1 mTorr, while anatase is favored at high pO 2 > 5 mTorr. Brookite forms primarily at intermediate pO 2 (0.5-1.0 mTorr). Controlling the amorphous structure (i.e. Ti - O bonding and polyhedral arrangement) of the precursors via oxygen deficiency is therefore likely for the selective formation of crystalline TiO 2 polymorphs from sub-stoichiometric amorphous precursors. Lastly, directing phase selectivity by manipulating the structure and internal energy of the precursor amorphous state may have tremendous potential for synthesis of metastable crystalline phases that exhibit more desirable properties in comparison to their stable counterparts.

36 MATERIALS SCIENCE↗

Microstructural and crystallographic effects of sol-gel synthesized Ti-doped UO 2 sintered under reducing conditions

Titanium (Ti)-doped UO 2 microspheres of three different Ti concentrations (1000, 2000, and 4000 wppm) were synthesized using an internal gelation process. The microspheres were pressed into pellets, and a two-step heat treatment was applied to form monolithic cylindrical pellets with high densities (≥95%TD). Microstructure of these samples consisted of equiaxed grains with >300% increase in average grain size compared to the undoped UO 2 pellets. Secondary Ti-rich chemical phases corresponding to a liquid eutectic formed during sintering were observed at grain boundaries of UO 2 for samples doped with 4000 wppm Ti. Furthermore, these Ti-rich chemical phases were not observed in 1000 or 2000 wppm Ti samples at microscale using electron microscopy investigations. The 0.02–0.04% lower lattice parameter values for the Ti-doped UO 2 samples compared to the undoped UO 2 confirms the incorporation of Ti into the UO 2 lattice.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

SnO 2 nanowires decorated with forsythia-like TiO 2 for photoenergy conversion

Here, we report forsythia-like TiO 2 -decorated SnO 2 nanowires on fluorine-doped SnO 2 electrode as a photoelectrode of dye-sensitized solar cells. When SnO 2 nanowires grown via vapor-liquid-solid reaction were soaked in TiCl 4 solution, leaf-shaped rutile TiO 2 was grown onto the surface of the nanowires. The TiO 2 decoration increases the short circuit current (J sc ), open circuit voltage (V oc ) and fill factor (FF) of dye-sensitized solar cells. Further, electron lifetime increased by employing an atomic-layer-deposited TiO 2 nanoshell between the TiO 2 leaves and the SnO 2 nanowire, due to preventing charge recombination at the nanowire/electrolyte interface.

14 SOLAR ENERGY↗