Search NASA⌕ Search

SEARCH · Search NASA

Results for “Time Constant”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Nonlinear stability and control study of highly maneuverable high performance aircraft, phase 2

This research should lead to the development of new nonlinear methodologies for the adaptive control and stability analysis of high angle-of-attack aircraft such as the F18 (HARV). The emphasis has been on nonlinear adaptive control, but associated model development, system identification, stability analysis and simulation is performed in some detail as well. Various models under investigation for different purposes are summarized in tabular form. Models and simulation for the longitudinal dynamics have been developed for all types except the nonlinear ordinary differential equation model. Briefly, studies completed indicate that nonlinear adaptive control can outperform linear adaptive control for rapid maneuvers with large changes in alpha. The transient responses are compared where the desired alpha varies from 5 degrees to 60 degrees to 30 degrees and back to 5 degrees in all about 16 sec. Here, the horizontal stabilator is the only control used with an assumed first-order linear actuator with a 1/30 sec time constant.

Mohler, R. R.↗

Ultra-stable performance of the superconducting cavity maser

Recent measurements on the superconducting cavity maser (SCM) oscillator show frequency stability of parts in 10 exp 15 for times from 1 to 1000 sec. Phase noise of approximately -80 dB/f-cubed was also measured. This short- and mid-term performance is believed to be better than that of any known microwave oscillator. In particular, stability at a measuring time of 1 sec is 10 times better than that of a hydrogen maser, and phase noise at 8 GHz is more than 20 dB below that of the best multiplied quartz crystal oscillators. Substantial technical improvements have been made to eliminate frequency instability due to operational parameters. They are temperature, pump frequency, pump power, pump frequency polarization, temperature gradient, coupling strength, and output VSWR. Either the parameter was stabilized or the coefficient which couples the parameter to the operating frequency was minimized. A frequency pulling coil has been implemented and tested to enable the SCM to be slaved to a hydrogen maser with a time constant of approximately 50 sec. This combination would allow the excellent long term performance of the hydrogen maser to be improved by the newly available short term performance of the SCM.

Dick, G. J.↗

On optimal infinite impulse response edge detection filters

The authors outline the design of an optimal, computationally efficient, infinite impulse response edge detection filter. The optimal filter is computed based on Canny's high signal to noise ratio, good localization criteria, and a criterion on the spurious response of the filter to noise. An expression for the width of the filter, which is appropriate for infinite-length filters, is incorporated directly in the expression for spurious responses. The three criteria are maximized using the variational method and nonlinear constrained optimization. The optimal filter parameters are tabulated for various values of the filter performance criteria. A complete methodology for implementing the optimal filter using approximating recursive digital filtering is presented. The approximating recursive digital filter is separable into two linear filters operating in two orthogonal directions. The implementation is very simple and computationally efficient, has a constant time of execution for different sizes of the operator, and is readily amenable to real-time hardware implementation.

Sarkar, Sudeep↗

Differential SO2 column measurements of the Mt. Pinatubo volcanic plume

Differential SO2 column measurements of the Mt. Pinatubo volcanic plume were made from a NASA Electra aircraft flying in the Caribbean in July, 1991. The mean column content of the volcanic plume in the Caribbean was 25 micro-atm m (2.5 Dobson units) with periods of over 100 micro-atm m observed. The data indicate that an aerosol absorption or scattering effect occurs for long slant paths (low sun-elevation angles) and that 41 micro-atm m (an average obtained for 1-2 airmasses) is more representative of a true column average. Dispersion of the initial cloud from Mt. Pinatubo and a one-month SO2-to-sulfate conversion-time constant are in good agreement with the column contents found here.

Hoff, Raymond M.↗

Impact of biomass burning on tropospheric CO and OH - A two-dimensional study

Results are presented from a 2D model of the troposphere and stratosphere which allows the derivation of a budget for CO, as well as the assessment of contributions from different sources in maintaining observed CO concentrations. Attention is given to the results of a time-dependent calculation which evaluates the impact of present-day biomass burning on CO, OH, and CH4, as well as the time constants for the system to respond to changes in the biomass source.

Rodriguez, Jose M.↗

The masses of Uranus and its major satellites from Voyager tracking data and earth-based Uranian satellite data

Improved values for the masses of the Uranian system and the satellites Ariel, Umbriel, Titania, Oberon, and Miranda are obtained on the basis of an analysis of the Doppler-tracking data and star-satellite imaging from the Voyager 2 spacecraft combined with earth-based astrometric satellite observations. Masses are expressed as the product, the universal gravitational constant times the mass of the body, in units of (cu km/sq s). The satellite masses are (4.4 +/- 0.5) for Miranda, (90.3 +/- 8.0) for Ariel, (78.2 +/- 9.0) for Umbriel, (235.3 +/- 6.0) for Titania, and (201.1 +/- 5.0) for Oberon. Quoted errors are standard errors and are the present assessment of the true rather than the formal errors. The Uranus rotational pole orientation angles and gravity harmonic coefficients were fixed at the values determined by French et al. (1988) from stellar occultations of the Uranian rings observed from both the earth and Voyager 2 and from the occultation of the spacecraft radio signal.

Jacobson, R. A.↗

High voltage spheres in an unmagnetized plasma - Fluid and PIC simulations

The basic physics involving the interaction of a high voltage sphere with a LEO-Plasma was investigated via computer experiments. Two approaches were used: the fluid description and the more general particle pushing method. Both techniques displayed qualitatively similar features. Thus, the initial time-dependent response of the plasma predicted by the fluid model, including the initial current surge and sheath formation, the formation of ion and electron density shells about the sphere with a double layer potential structure, and the subsequent propagation of the density shells away from the sphere. The PIC results also displayed an oscillatory character and slightly different time constants for the growth and decay mechanisms involved.

Thiemann, H.↗

Pancakelike domes on Venus

The shape of seven large domes on the plains of Venus, with volumes between 100 and 1000 cu km, is compared with that of an axisymmetric gravity current spreading over a rigid horizontal surface. Both the altimetric profiles and the horizontal projection of the line of intersection of domes on the SAR images agree well with the theoretical similarity solution for a newtonian fluid, but not with the shape calculated for a rigid-plastic rheology, nor with that for a static model with a strong skin. As a viscous current spreads, it generates an isotropic strain rate tensor whose magnitude is independent of radius. Such a flow can account for the randomly oriented cracks that are uniformly distributed on the surface of the domes. The stress induced by the flow in the plains material below is obtained, and is probably large enough to produce the short radial cracks in the surface of the plains beyond the domes. The viscosity of the domes can be estimated from their thermal time constants if spreading is possible only when the fluid is hot, and lies between 10(exp 14) and 10(exp 17) Pa s. Laboratory experiments show that such viscosities correspond to temperatures of 610 - 690 C in dry rhyolitic magmas. These temperatures agree with laboratory measurements of the solidus temperature of wet rhyolite. These results show that the development of the domes can be understood using simple fluid dynamical ideas, and that the magmas involved can be produced by wet melting at depths below 10 km, followed by eruption and degassing.

Mckenzie, Dan↗

Design and construction of high-sensitivity, infrared bolometers for operation at 300 mK

The design and construction of 300-mK composite bolometers developed for millimeter-wave astronomical observations are described. Graphite fibers are used as the electrical leads for the thermistor to reduce the thermal conductance and heat capacity associated with the leads. A mechanical suspension made of Nylon fibers provides the required thermal conductance. Electrical noise equivalent powers below 1 x 10 exp -16 W/sq rt Hz have been achieved for detectors with thermal time constants of 11 ms. The detectors were installed in a millimeter-wave photometer and used to perform observations of the cosmic microwave background from a balloonborne platform. The flight performance was consistent with the measured laboratory properties.

Alsop, D. C.↗

Two-scale model of a geomagnetic field variation

The effect of the vertical scale is investigated by considering a simple kinematic two-scale model of fluid flow inducing a variable magnetic field. Depending on the time constant, the induced magnetic field displays a variety of behaviors and geometries. In the high-frequency case, for example, a strong magnetic field tangential to the core mantle boundary, and hidden in the Delta layer, can be generated. A detailed computation and description of this magnetic field are presented. Some possible features of the secular variation of the actual geomagnetic field are discussed in the light of the model proposed here.

Braginsky, S. I.↗

Spatial sampling errors for a satellite-borne scanning radiometer

The Clouds and Earth's Radiant Energy System (CERES) scanning radiometer is planned as the Earth radiation budget instrument for the Earth Observation System, to be flown in the late 1990's. In order to minimize the spatial sampling errors of the measurements, it is necessary to select design parameters for the instrument such that the resulting point spread function will minimize spatial sampling errors. These errors are described as aliasing and blurring errors. Aliasing errors are due to presence in the measurements of spatial frequencies beyond the Nyquist frequency, and blurring errors are due to attenuation of frequencies below the Nyquist frequency. The design parameters include pixel shape and dimensions, sampling rate, scan period, and time constants of the measurements. For a satellite-borne scanning radiometer, the pixel footprint grows quickly at large nadir angles. The aliasing errors thus decrease with increasing scan angle, but the blurring errors grow quickly. The best design minimizes the sum of these two errors over a range of scan angles. Results of a parameter study are presented, showing effects of data rates, pixel dimensions, spacecraft altitude, and distance from the spacecraft track.

Manalo, Natividad D.↗

Optimal evaluation of array expressions on massively parallel machines

We investigate the problem of evaluating FORTRAN 90 style array expressions on massively parallel distributed-memory machines. On such machines, an elementwise operation can be performed in constant time for arrays whose corresponding elements are in the same processor. If the arrays are not aligned in this manner, the cost of aligning them is part of the cost of evaluating the expression. The choice of where to perform the operation then affects this cost. We present algorithms based on dynamic programming to solve this problem efficiently for a wide variety of interconnection schemes, including multidimensional grids and rings, hypercubes, and fat-trees. We also consider expressions containing operations that change the shape of the arrays, and show that our approach extends naturally to handle this case.

Chatterjee, Siddhartha↗

Considerations on formation flying separations for earth observing satellite missions

We assume that scientific requirements (or other mission requirements) call for simultaneous observations from sensors located on different formation-flying spacecraft, and assess how well various kinds of formations of two and three spacecraft can meet these simultaneity requirements. We simulate two types of formation, one where the slave spacecraft moves with respect to the reference spacecraft, and the other where the two spacecraft are kept at a constant time separation. For each type of formation we consider two attitudes: a perfect local vertical local horizontal (LVLH) and an attitude which represents the maximum allowable mission tolerance offset from the mission requirements for attitude determination. We simulate formations of multiple spacecraft and determine how well they can perform simultaneous observations. For each spacecraft we compute the instantaneous ground projection of the center of the imager's fieId of view and plot the movement of the instantaneous ground projection of one spacecraft in the formation relative to the other. The size and shape of this effective ground target parametrize the size and shape of the actual ground target as well as the size and shape of the imager's field of view and the percentage of overlap required.

Folta, David↗

A dc-coupled, high sensitivity bolometric detector system for the Infrared Telescope in Space

We report the performance of an ac bridge readout system that has been developed for use on the Infrared Telescope in Space which is scheduled for launch in 1994. The ac bridge readout provides excellent dc stability enabling observing strategies well-suited to space-borne observations. The ability to modulate the optical signal slowly allows the use of new, highly sensitive, long time-constant bolometers. At 300 mK, the bolometers have an electrical noise equivalent power of 3 x 10 exp -17 W/sq rt Hz. The total noise of the differential signal, including amplifier noise, is less than 8 x 10 exp -17 W/sq rt Hz at frequencies as low as 35 mHz.

Devlin, M.↗

Improved fabrication techniques for infrared bolometers

Techniques are described for producing improved infrared bolometers from doped germanium. Ion implantation and sputter metalization have been used to make ohmic electrical contacts to Ge:Ga chips. This method results in a high yield of small monolithic bolometers with very little low-frequency noise. When one of these chips is used as the thermometric element of a composite bolometer, it must be bonded to a dielectric substrate. The thermal resistance of the conventional epoxy bond has been measured and found to be undesirably large. A procedure for soldering the chip to a metalized portion of the substrate is described which reduced this resistance. The contribution of the metal film absorber to the heat capacity of a composite bolometer has been measured. The heat capacity of a NiCr absorber at 1.3 K can dominate the bolometer performance. A Bi absorber has significantly lower heat capacity. A low temperature blackbody calibrator has been built to measure the optical responsivity of bolometers. A composite bolometer system with a throughput of approx. 0.1 sr sq cm was constructed using the new techniques. In negligible background it has an optical NEP of 3.6 10((exp -15) W/sq root of Hz at 1.0 K with a time constant of 20 ms. The noise in this bolometer is white above 2.5 Hz and is somewhat below the value predicted by thermodynamic equilibrium theory. It is in agreement with calculations based on a recent nonequilibrium theory.

Lange, A. E.↗

Exploratory Investigation of Laminar-boundary-layer Oscillations on a Rotating Disk

Sinusoidal waves excited by random disturbances have been observed in the laminar boundary layer of a rotating disk at Reynolds numbers in a narrow range below the Reynolds number of transition. Their frequency was found to be approximately a constant times the velocity of the disk. The velocity of the waves at the radius of 11 inches was determined and found to be 0.2 linear velocity of the disk in a downstream direction, making an angle of approximately 14 degrees with the outward drawn radius vector.

Smith, Newell H↗

Experimental Investigation of Dynamic Relations in a 48-inch Ram-jet Engine

Engine dynamics were investigated for supercritical operation of the ram jet at Mach 2.75 over a range of simulated altitudes from 68,000 to 82,000 feet. Indicial-and frequency-response tests were conducted with fuel flow as the input variable. For a wide range of operating points, the response of static or total pressure to fuel flow consisted of a dead time followed by a response form that generally approximated a linear, first-order, lead-lag. The dead time varied significantly only with distance from the combustion zone. The rise ratio and the time constant of the lead-lag function were nearly independent of the pressure sensed.

Hurrell, Herbert G↗

Computation of signal delays in RC networks

A model for signal delay computation in RC networks is presented. The strength of the paradigm is its generality and simplicity. The definition of delay is applicable to RC meshes with potential resistive attenuating paths to ground. The algorithms can also be applied to undriven circuits (static charge sharing) and circuits with initial charge. To compute the delays, each node in the network is explored locally to derive a system of sparse linear equations. The solutions of the system are delay values based on the Elmore time constant at each point in the circuit.

Hidalgo, Juan Carlos↗