Search NASA⌕ Search

SEARCH · Search NASA

Results for “alkalinity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Hydrogenated TiO 2 Carbon Support for PtRu Anode Catalyst in High‐Performance Anion‐Exchange Membrane Fuel Cells

Abstract The availability of durable, high‐performance electrocatalysts for the hydrogen oxidation reaction (HOR) is currently a constraint for anion‐exchange membrane fuel cells (AEMFCs). Herein, a rapid microwave‐assisted synthesis method is used to develop a core–shell catalyst support based on a hydrogenated TiO 2 /carbon for PtRu nanoparticles (NPs). The hydrogenated TiO 2 provides a strong metal‐support interaction with the PtRu NPs, which improves the catalyst's oxophilicity and HOR activity compared to commercial PtRu/C and enables greater size control of the catalyst NPs. The as‐synthesized PtRu/TiO 2 /C‐400 electrocatalyst exhibits respectable performance in an AEMFC operated at 80 °C, yielding the highest current density (up to 3× higher) within the catalytic region (compared at 0.80–0.90 V) and voltage efficiency (68%@ 0.5 A cm −2 ) values in the compared literature. In addition, the cell demonstrates promising short‐term voltage stability with a minor voltage decay of 1.5 mV h −1 . This “first‐of‐its‐kind in alkaline” work may open further research avenues to develop rapid synthesis methods to prepare advanced core–shell metal‐oxide/carbon supports for electrocatalysts for use in the next‐generation of AEMFCs with potential applicability to the broader electrochemical systems research community.

08 HYDROGEN↗
DOE OSTI2023

NiFe Nanoparticle Nest Supported on Graphene as Electrocatalyst for Highly Efficient Oxygen Evolution Reaction

Abstract Designing cost‐efffective electrocatalysts for the oxygen evolution reaction (OER) holds significant importance in the progression of clean energy generation and efficient energy storage technologies, such as water splitting and rechargeable metal–air batteries. In this work, an OER electrocatalyst is developed using Ni and Fe precursors in combination with different proportions of graphene oxide. The catalyst synthesis involved a rapid reduction process, facilitated by adding sodium borohydride, which successfully formed NiFe nanoparticle nests on graphene support (NiFe NNG). The incorporation of graphene support enhances the catalytic activity, electron transferability, and electrical conductivity of the NiFe‐based catalyst. The NiFe NNG catalyst exhibits outstanding performance, characterized by a low overpotential of 292.3 mV and a Tafel slope of 48 mV dec −1 , achieved at a current density of 10 mA cm − 2 . Moreover, the catalyst exhibits remarkable stability over extended durations. The OER performance of NiFe NNG is on par with that of commercial IrO 2 in alkaline media. Such superb OER catalytic performance can be attributed to the synergistic effect between the NiFe nanoparticle nests and graphene, which arises from their large surface area and outstanding intrinsic catalytic activity. The excellent electrochemical properties of NiFe NNG hold great promise for further applications in energy storage and conversion devices.

Chemistry↗
DOE OSTI2026

Interfacial and Kinetic Origins of Voltage Loss in Neutral Zinc‐Air Batteries

Rechargeable zinc-air batteries are promising candidates for grid-scale energy storage; however, their practical deployment is limited by oxygen electrocatalysis inefficiencies and interfacial instabilities, particularly outside conventional alkaline electrolytes. Here, in this work, zinc-air batteries operating under neutral electrolyte conditions using ZnCl 2 soaked KC-PAA-PAM gel polymer electrolytes and electrochemically synthesized Ni/Fe layered double hydroxide electrocatalysts is investigated. Ni/Fe-LDH is intentionally employed as an OER-biased benchmark catalyst to diagnose electrolyte and interface driven limitations rather than as a bifunctional ORR/OER solution. Full cells exhibit highly stable cycling over hundreds of hours, yet operate at substantially suppressed charge and discharge voltages relative to the thermodynamic value. Electrochemical impedance analysis shows that ohmic losses contribute only minimally to this voltage suppression. Post-mortem X-ray photoelectron spectroscopy reveals metallic zinc accumulation on the air cathode and chloride-containing species on the anode, indicating parasitic interfacial processes. Synchrotron-based soft X-ray absorption spectroscopy confirms stable Ni 2+ and Fe 3+ oxidation states during cycling, consistent with OER-biased catalytic behavior, while neutral-electrolyte oxygen evolution measurements demonstrate strong electrolyte-induced suppression of oxygen kinetics. Together, these results show that electrolyte chemistry and cathode-side parasitic processes, rather than catalyst identity alone, dominate voltage losses in neutral zinc-air batteries, providing mechanistic insight into the fundamental challenges associated with neutral electrolyte operation.

Long duration energy storage↗
DOE OSTI2026

Metalloborophenes: Structural Diversity and Emerging Properties of Metal–Boron Two‐Dimensional Frameworks

Metalloborophenes, an emerging subclass of 2D materials, have attracted growing attention owing to their exceptional structural diversity and highly tunable electronic and magnetic properties. Constructed from vacancy‐rich borophene frameworks stabilized by electron donation from incorporated metal atoms, metalloborophenes merge the chemical versatility of boron with the functional richness of metal dopants. The first experimental realization of Cu–borophene nanoribbons in 2024 marked a pivotal advance, confirming long‐standing theoretical predictions and revitalizing interest in this new frontier of boron‐based 2D chemistry. Despite this progress, most studies to date remain conceptual and theoretical, constrained by challenges in scalable synthesis, dopant precision, and substrate control. Computational investigations have revealed a broad landscape of stable metalloborophene structures, exhibiting metallic, semiconducting, and magnetic behavior across diverse dopant families, including alkali, alkaline‐earth, transition, and lanthanide elements. These tunable characteristics open promising avenues for applications in spintronics, catalysis, and hydrogen storage. This review provides a comprehensive overview of metalloborophenes, emphasizing the interplay between structure, stability, and functionality, and outlining future directions toward bridging predictive modeling with experimental realization of this rapidly evolving class of 2D materials.

2D materials↗
DOE OSTI2020

Atomically Dispersed Single Ni Site Catalysts for Nitrogen Reduction toward Electrochemical Ammonia Synthesis Using N 2 and H 2 O

Ammonia (NH 3 ) electrosynthesis gains significant attention as NH 3 is essentially important for fertilizer production and fuel utilization. However, electrochemical nitrogen reduction reaction (NRR) remains a great challenge because of low activity and poor selectivity. Herein, a new class of atomically dispersed Ni site electrocatalyst is reported, which exhibits the optimal NH 3 yield of 115 µg cm -2 h -1 at –0.8 V versus reversible hydrogen electrode (RHE) under neutral conditions. High faradic efficiency of 21 ± 1.9% is achieved at -0.2 V versus RHE under alkaline conditions, although the ammonia yield is lower. The Ni sites are stabilized with nitrogen, which is verified by advanced X-ray absorption spectroscopy and electron microscopy. Density functional theory calculations provide insightful understanding on the possible structure of active sites, relevant reaction pathways, and confirm that the Ni-N 3 sites are responsible for the experimentally observed activity and selectivity. Extensive controls strongly suggest that the atomically dispersed NiN 3 site-rich catalyst provides more intrinsically active sites than those in N-doped carbon, instead of possible environmental contamination. Overall, this work further indicates that single-metal site catalysts with optimal nitrogen coordination is very promising for NRR and indeed improves the scaling relationship of transition metals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

2D Single-Atom Catalyst with Optimized Iron Sites Produced by Thermal Melting of Metal–Organic Frameworks for Oxygen Reduction Reaction

Zeolitic-imidazolate-frameworks-8 (ZIF-8) derivatives have recently been demonstrated as one of the most ideal precursors to prepare single-atom metal catalysts for oxygen reduction reaction (ORR). However, abundant single-atom metal sites are buried in the derived carbon nanoparticles, rendering them useless for ORR. In this work, a novel ZIF-8 "thermal melting" strategy is proposed to prepare a high specific surface area of Fe-N-doped graphene nanosheets (Fe-N/GNs) with single-atom Fe-sites on the surface which are accessible to electrolytes, optimizing their utilization and improving ORR activity. As a result, the Fe-N/GNs material exhibits excellent ORR activity with half-wave potentials of 0.903 V in alkaline media and 0.837 V in acidic media, which are comparable to commercial Pt/C catalysts.

2D↗
DOE OSTI2024

A lipase from Lacticaseibacillus rhamnosus IDCC 3201 with thermostability and pH resistance for use as a detergent additive

Lipases are important biocatalysts and ubiquitous in plants, animals, and microorganisms. The high growth rates of microorganisms with low production costs have enabled the wide application of microbial lipases in detergent, food, and cosmetic industries. Herein, a novel lipase from Lacticaseibacillus rhamnosus IDCC 3201 (Lac-Rh) was isolated and its activity analyzed under a range of reaction conditions to evaluate its potential industrial application. The isolated Lac-Rh showed a molecular weight of 24 kDa and a maximum activity of 3438.5 ± 1.8 U/mg protein at 60 °C and pH 8. Additionally, Lac-Rh retained activity in alkaline conditions and in 10% v/v concentrations of organic solvents, including glycerol and acetone. Interestingly, after pre-incubation in the presence of multiple commercial detergents, Lac-Rh maintained over 80% of its activity and the stains from cotton were successfully removed under a simulated laundry setting. Overall, the purified lipase from L. rhamnosus IDCC 3201 has potential for use as a detergent in industrial applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

The production of hydrogen–deuterium exchanged cellulose fibers with exchange-resistant deuterium incorporation

Production of deuterated cellulose is important from both theoretical and practical perspectives. Here, cellulose fibers of cotton and Tencel fibers with exchange-resistant deuterium incorporation were prepared by hydrogen–deuterium exchange treatment. The effect of the micro-structure of cellulose crystallinity index as well as the reaction conditions including catalyst, reaction time, and temperature on the exchange-resistant deuterium incorporation process are reported. The ability of deuterated cellulose fibers to resist protium-exchange during H 2 O washing was also explored. The results found that higher crystallinity index is beneficial to stabilize the deuteration of cellulose fibers. Furthermore, alkaline catalysts such as sodium hydroxide or potassium carbonate and higher exchange temperature as well as longer reaction time contribute significantly to the stabilization of deuterium incorporation in the deuterated cellulose fibers. These observations revealed that the hydrogen–deuterium exchange treatment is effective to obtain exchange-resistant deuterium incorporated cellulose fibers. In addition, cotton fibers with several deuteration levels were produced and could be considered for the study of deuterium effect on cellulose properties.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Deuterium incorporation into cellulose: a mini-review of biological and chemical methods

Isotopic enrichment offers structural insights that are not easily accessible with natural abundance isotopic composition. Deuterated cellulose has attracted considerable attention in the field of neutron scattering studies, providing information about the dynamics, structure of cellulose and its interactions with other plant cell wall components. The deuteration of cellulose also allows the analysis of cellulose hydrogen bonds by FTIR or NMR techniques. The chemical structure of cellulose contains both exchangeable hydroxyl and non-exchangeable alkyl hydrogens. Deuterium incorporation can be divided into two classifications: biological route which incorporates both alkyl and hydroxyl bound deuterium, and chemical route which typically replaces hydroxyl-bound exchangeable hydrogen. Additionally, the biological route involves cultivating plants or microorganisms in a deuterium-enriched medium. The chemical route typically involves an exchange reaction between hydroxyl-bound hydrogen and D 2 O, often facilitating with an alkaline reagent. This review provides an overview of recent advances in deuteration methods and characterization as well as the application of deuterated cellulose.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Molten Halide Salt Surface Tension: Methods and Correlations

Here, this paper reviews various methods for studying surface tension and their applicability to fluoride and chloride molten salt systems, including a comparison of benefits and drawbacks. Such a comparison aids in experiment design based on desired factors such as scale, accuracy, and repeatability. A detailed review is presented for existing literature data regarding the surface tension of molten fluoride and chloride salts. These reference data were compiled and analyzed to determine cross-validated correlation equations for several alkali and alkaline earth fluoride and chloride salts as functions of temperature. These correlations are necessary for reliable multiphysics modeling approaches as well as accurate design and analysis of multiphase molten salt phenomena such as gas sparging and bubble formation/transport. This analysis supports the development of the thermophysical arm of the Molten Salt Thermal Properties Database (MSTDB-TP) managed by Oak Ridge National Laboratory.

Chloride↗
DOE OSTI2025

Environmental controls on the kinetics of iron-sulfur cluster nucleation and nanoparticle formation

Anoxic, sulfidic conditions have been prevalent since the early Proterozoic and favor aqueous iron-sulfur (FeS aq ) clusters as a major fraction of the soluble, reduced iron and sulfur pool. FeS aq cluster formation and nucleation is driven by the high affinity between ferrous iron (Fe(II)) and sulfide (HS − ), ultimately yielding particles that precipitate as iron sulfide minerals. FeS aq clusters were recently shown to be bioavailable sources of iron and sulfur for a variety of anaerobes, yet little is known of the factors that influence the kinetics of their formation and nucleation. Here we apply computational and spectroscopic approaches to investigate the dynamics of FeS aq nucleation, cluster growth, precipitation, and redissolution as a function of Fe(II)/HS − concentration, temperature, and pH. Experiments were conducted under excess HS − to mimic euxinic conditions common to contemporary anaerobic aquatic ecosystems and those of the Proterozoic. Density functional theory calculations reveal the key role of water oxygen-iron interactions in stabilizing small FeS aq clusters and promoting solubility. Dynamic light scattering revealed a concentration-dependent increase in the kinetics of FeS aq nucleation and cluster aggregation. Increasing temperature promoted FeS aq cluster nucleation and aggregation while also enhancing dissolution. Alkaline pH also promoted FeS aq nucleation and cluster aggregation. At 25 °C, pH 7.0, and at reactant concentrations of 30 µM, FeS aq clusters < 10 nm in diameter remained in solution for > 2 h. These results underscore the importance of temperature, pH, and reactant concentration in the kinetics of FeS aq nucleation and cluster growth that, in turn, influence their bioavailability in anaerobic ecosystems.

Aquatic ecosystems↗
DOE OSTI2021

Sequential oxidation-depolymerization strategies for lignin conversion to low molecular weight aromatic chemicals

Lignin is the largest source of bio-derived aromatic chemicals, and oxidative conversion of this polymeric material can generate valuable oxygenated aromatic compounds. Oxidative depolymerization of lignosulfonate feedstocks under alkaline conditions is used commercially for vanillin production. Recent studies have led to other oxidation methods that access different aromatic products from lignin in good yields. A particularly effective strategy that accesses some of the highest yields of aromatic monomers to date features a two-step process in which the oxidation of specific alcohol groups in lignin is followed by an oxidative, reductive, or redoxneutral step that cleaves the polymer into aromatic monomers and oligomers. Studies of model compounds have provided crucial mechanistic insights and contributed to the development of effective lignin depolymerization methods. Furthermore, this review provides a general overview of lignin depolymerization methods, followed by a survey of oxidation-depolymerization methods that access oxygenated aromatic monomers in good yields.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Improved CO 2 utilization efficiency using membrane carbonation in outdoor raceways

Membrane carbonation, the delivery of CO 2 by diffusion through non-porous hollow fiber membranes, was successfully integrated into outdoor raceways (5.6 m 2 , 900 L) and operated continuously for up to 45 days. Biomass productivity associated with membrane carbonation was similar to using traditional sparging, but the average carbon utilization efficiencies for membrane carbonation was 3-fold higher than for sparging when 100% CO 2 was delivered to both systems. Here, when the pH setpoint was 8.5, growth on ammonium bicarbonate using membrane carbonation achieved a carbon utilization efficiency of 106 ± 45% due to uptake of some carbon from bicarbonate. Using nitrate as the N source had a 78 ± 55% carbon utilization efficiency, due to dissolved inorganic carbon accumulation as the medium alkalinity increased. Lowering the pH setpoint to 8.0 created a carbon-rich environment that decreased the carbon utilization efficiency to 51 ± 27% due to CO 2 off-gassing, but it still was 3-fold higher than with sparging.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Excessive Aurantiochytrium acetophilum docosahexaenoic acid supplementation decreases growth performance and breast muscle mass of broiler chickens

We report Docosahexaenoic acid (DHA) is an n-3 polyunsaturated fatty acid with health-promoting potential. This study was to investigate effects of supplemental DHA from Aurantiochytrium acetophilum on growth performance, health status, meat quality, and protein synthesis signaling of broiler chickens. Day-old male chicks were housed in an environmental control room (6 cages/treatment, 8 chicks/cage), and fed a corn-soybean meal basal diet supplemented with the DHA-rich A. acetophilum biomass (Heliae, Gilbert, AZ) at 0, 1, 2, and 4% (0, 1.7, 3.4 and 6.8 g DHA/kg diet) for 6 weeks. Growth performance was measured weekly. Blood samples were collected at weeks 3 and 6 (2 chicks/cage). Four tissues were sampled (2 chicks/cage) for biochemical and meat quality analyses. Data were analyzed by one-way ANOVA and regression. Compared with the control, the 4% A. acetophilum diet decreased (p < 0.05) body weight gain (19%) and gain to feed ratio (19%) during weeks 4–6. The A. acetophilum supplementation dose-dependently decreased (p < 0.05, R 2 = 0.21–0.54) plasma alanine amino transferase activity and glucose concentrations, but had little effect on plasma activity of alkaline phosphatase or concentrations of inorganic phosphorus and uric acid at weeks 3 and 6. Compared with the control, the 4% A. acetophilum diet decreased (p < 0.05) breast muscle weight by 21%, and down-regulated (p < 0.05) mRNA levels of mammalian target of rapamycin and ribosomal s6 protein (S6), and protein levels of phosphorylated S6 to S6 and phosphorylated S6 kinase beta 1 to S6 kinase beta 1. The A. acetophilum supplementation linearly increased (p < 0.01) lipid peroxidation (R 2 = 0.62–0.90) and hardness and chewiness (R 2 = 0.34–0.44) of breast and thigh muscles. In conclusion, supplemental 4% (6.8 g DHA/kg), but not 1 or 2%, of A. acetophilum impaired growth performance, breast muscle mass accumulation, and(or) protein synthesis signaling of broilers.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Effect of pretreatment conditions on acidity and dehydration activity of CeO 2 -MeO x catalysts

A series of MeOx-modified CeO 2 (CeO 2 -MnO x , CeO 2 -ZnO, CeO 2 -MgO, CeO 2 -CaO, and CeO 2 -Na 2 O) catalysts were prepared by the impregnation of CeO 2 with corresponding metal nitrates. Acidity and oxidation state of cerium were investigated on both oxidized and reduced catalysts by employing Fourier Transform Infrared spectroscopy (FTIR) on adsorbed pyridine and in situ H 2 -Temperature Programmed Reduction/X-ray Absorption Spectroscopy (H 2 -TPR/XAS) techniques, respectively. Metal oxide addition tended to alter both type and number of acid sites on ceria. EXAFS data showed a significant difference in N Ce-O between unmodified and CeO 2 -MeO x , suggesting that added MeO x interferes with vacancy formation on ceria during reduction. Here, in comparison with air-pretreated samples, H 2 -pretreated ones under similar conversion of 1,5 pentanediol exhibited a higher selectivity towards linear alcohols. Alcohol conversion found to correlate with total acidity (i.e., Brønsted and Lewis). CeO 2 benefited from the addition of alkali (Na) or alkaline earth metals (Mg, Ca) by producing unsaturated alcohols.

1,5-Pentanediol↗
DOE OSTI2025

Electrosynthesis of high purity ethylene using high-index facet Cu 2 O nanocrystals electrocatalyst

Electrochemical CO 2 reduction reaction (eCO2RR) to multi-carbon (C 2+ ) products with copper-based catalysts is often limited by poor selectivity. This challenge arises from the concurrent formation of various intermediates, dictated by the atomic arrangement and electronic properties of surface atoms. In this study, we found that copper (I) oxide (Cu 2 O) nanocrystals with 50 facets (50F-NC), predominantly featuring (211) facets that offers high density of under-coordinated sites, demonstrate superior ethylene (C 2 H 4 ) selectivity of 92% ± 2 with an overall current density of 212 mA/cm 2 at -650 mV vs RHE. Furthermore, after one month of storage in a 1 M KOH electrolyte, this catalyst demonstrated a C 2 H 4 Faradaic efficiency of 87% highlighting its stabile structure under strong alkaline environments. Here, operando electrochemical Raman spectroscopy revealed enhanced CO* intermediate coverage on the 50F-NC catalyst, correlating with improved C-C coupling. SEM, TEM, and XPS analyses, along with DFT calculations, suggested that Cu sites on the (211) facet of 50F-NC and those at the Cu/Cu 2 O interface formed in-situ due to the surface reconstruction during the reaction, are likely active sites for effective C-C coupling and sustained high-rate C 2 H 4 production.

Cu nano particle↗
DOE OSTI2026

Bipolar Membrane Electrodialyzers as Flexible Demand Response Resources: Co-Optimization of Cost Savings and Product Formation

Bipolar membrane electro dialyzers (BPMED) are widely used for chemical production and processing, including in the emerging ocean alkalinity enhancement (OAE) industry. In this paper, we explore the potential of BPMED devices as flexible electrochemical loads within power system operations. Using a multi-objective optimization framework, we evaluate BPMED operation across 24-hour and monthly horizons to examine how dispatch strategies respond to electricity price and grid conditions. Simulation results show that altering the relative weights of the choices in the objective function strongly shape the operating patterns, with cost-focused strategies that suppress the operation during peak prices. Furthermore, we propose alternative formulations that optimize operations to achieve both cost savings and alignment with periods of lower grid-side carbon intensity (CI), as low grid-side CI is key to maximize OAE efficiency. Additionally, a detailed sensitivity analysis highlights the importance of device properties, where low area-specific resistance (ASR) of membrane and high current efficiency (CE) are observed to jointly unlock cost-effective operation. However, even modest shunt efficiency losses are observed to erode performance and decrease system value. Importantly, the analysis demonstrates that BPMED can serve as a controllable and flexible demand response resource, shifting load to support multiple grid-side objectives, including (but not limited to) renewable integration, alleviate peak demand, and provide co-benefits for system reliability. These findings underscore BPMED’s dual role as a process technology and a grid-supporting asset, pointing to promising pathways for operational optimization of multiple objectives.

Bhattacharya, Saptarshi (ORCID:0000000308902060)↗
DOE OSTI2021

Systematic investigations on iron cycling in phosphorus/siderophore systems: Synergism or antagonism?

Synergisms between microbial exudates on Fe (hydr)oxide dissolution as an effective Fe acquisition pathway have been recently addressed and vigorously debated. However, Fe liberation mechanisms and where siderophores and phosphorus (P) coexist received little attentions. Current study systematically investigated ferrihydrite dissolution in the presence of desferrioxamine B (DFOB) (a kind of fungally-derived siderophores) and inorganic/organic phosphorus (orthophosphate, Pi; myo-inositol hexaphosphate, IHP), as a function of solute pH, reaction time and reagent content. Reacted solids were characterized by N 2 -BET adsorption, zeta (ζ) potential analysis, sequential extraction analysis (SEDEX), field emission scanning electron microscopy (FESEM), high-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), micro Raman spectroscopy and attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR). Our results indicate that upon reaction with P-only or (DFOB + P) systems, interfacial complexation partially switched from monolayer bidentate-binuclear surface complexes to ternary complexes, or laterally transformed into amorphous Fe–P precipitates. The Fe-Pi complex precipitated more readily under acidic conditions, and Fe-IHP complex preferentially nucleated in neutral-alkaline environments. Phosphorus slightly promoted Fe release from minerals and fixation to the leached layer or interfacial liquid zone initially, but subsequently prevented further attacks from protons and DFOB. The co-effects of P and DFOB likely correspond to two successive scenarios: 1) DFOB is preferentially attracted toward ferrihydrite surfaces by negative electrical fields induced by adsorbed phosphorus and can act synergistically with labile P–Fe complexes, resulting in intensive temporal dissolution of Fh; 2) subsequent Fe shuttling to DFOB can be prohibited by stabilized, passive P/Fe–P layers. Finally, our results emphasize the antagonism between P compounds and siderophores (i.e., DFOB here) on ferrihydrite dissolution to improve understanding of the biologically-mediated Fe cycling in natural systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗