Search NASA⌕ Search

SEARCH · Search NASA

Results for “asteroid sample”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

OSIRIS-REx, bringing back a bit of an asteroid

The OSIRIS-REx mission will provide invaluable ground-truth validation for the computer models in a case study that set out to determine the timeframe within which we must launch either a kinetic impactor or a nuclear explosive carrier and develop a conceptual design for that spacecraft. From the on-asteroid data gathered when the spacecraft touches down and, eventually, from hands-on research here on Earth, we will get a reality check for what we think we know about Bennu’s material composition (boulders, chunks, and dust), shape, mass, density, and so on. Gravimetric data could reveal whether the asteroid is hollow. Back on Earth, researchers will run various tests on the material. We may have enough information to develop a theoretical equation of state. We could then compare it to its closest match in SESAME, the Los Alamos database of equations of state. Armed with that data, we will rerun the models to see how much each scenario changes. Comparing data from the touchdown and sample return to the earlier, remotely observed data from Bennu will help us calibrate remote observations of other objects in the future. Then we can more precisely model the effects of our deflection and disruption strategies and refine the spacecraft design.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Coordinated neutron and X-ray computed tomography of meteorites: Detection and distribution of hydrogen-bearing materials

The presence and distribution of hydrogen-bearing materials in meteorites are important constraints on processes in the early solar system, and the delivery of volatile constituents to growing planets. Here, in this paper, we show that coordinated neutron and X-ray computed tomography, NXCT, can reveal the presence and distributions of hydrogen-bearing materials in meteorites, and thus help constrain the presence and actions of water in the early solar system. NXCT is nearly nondestructive of meteorite samples. Neutron fluence in NXCT is approximately seven orders of magnitude less than in typical instrumental neutron activation analysis, and so produces little residual radioactivity and currently undetectable changes in isotope ratios. Heating during NXCT is minimal, but NXCT will overprint the record of cosmic ray exposure held in natural thermoluminescence. Two meteorites were examined. EET 87503 is a howardite, a regolith breccia inferred to be from the asteroid 4 Vesta, and contains fragments of eucrite basalt, diogenite pyroxenite, and H-rich carbonaceous chondrites. With NXCT, the chondrite fragments within the meteorite piece can be clearly located and characterized, in preparation for possible extraction and detailed analyses. Graves Nunataks (GRA) 06100 is a CR2 chondrite meteorite that contains abundant iron metal and H-bearing silicates from aqueous alteration. In NXCT, H-bearing altered material is clearly distinguished from metal, and its distribution in three dimensions is revealed as a constraint on the processes of alteration.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2004

Multi-Wavelength Observations of Asteroid 2100 Ra-Shalom: Visible, Infrared, and Thermal Spectroscopy Results

The August 2003 apparition of asteroid 2100 Ra-Shalom brought together a collaboration of observers with the goal of obtaining rotationally resolved multiwavelength spectra at each of 5 facilities: infrared spectra at the NASA Infrared Telescope Facility (Clark and Shepard), radar images at Arecibo (Shepard and Clark), thermal infrared spectra at Palomar (Lim, McConnochie and Bell), visible spectra at McDonald Observatory (Vilas, Lederer and Jarvis), and visible lightcurves at Ondrojev Observatory (Pravec). The radar data was to be used to develop a high spatial resolution physical model to be used in conjunction with spectral data to investigate compositional and textural properties on the near surface of Ra Shalom as a function of rotation phase. This was the first coordinated multi-wavelength investigation of any Aten asteroid. There are many reasons to study near-Earth asteroid (NEA) 2100 Ra-Shalom: 1) It has a controversial classification (is it a C- or K-type object)? 2) There would be interesting dynamical ramifications if Ra-Shalom is a K-type because most K-types come from the Eos family and there are no known dynamical pathways from Eos to the Aten population. 3) The best available spectra obtained previously may indicate a heterogeneous surface (most asteroids appear to be fairly homogeneous). 4) Ra-Shalom thermal observations obtained previously indicated a lack of regolith, minimizing the worry of space weathering effects in the spectra. 5) Radar observations obtained previously hinted at interesting surface structures. 6) Ra-Shalom is one of the largest Aten objects. And 7) Ra-Shalom is on a short list of proposed NEAs for spacecraft encounters and possible sample returns. Preliminary results from the visible, infrared, and thermal spectroscopy measurements will be presented here.

Clark, Beth Ellen↗
NASA NTRS2013

Insights into Collisional between Small Bodies: Comparison of Impacted Magnesium-rich Minerals

Impacts are sustained by comets and asteroids throughout their lives, especially early in the Solar system's history, as described by the Nice model. Identifying observable properties that may be altered due to impacts can lead to a better understanding their collisional histories. Here, we investigate spectral effects and physical shock features observed in infrared spectra and Transmission Electron Microscope (TEM) images, respectively, of magnesium-rich minerals subjected to shock through impact experiments. Samples of magnesium-rich forsterite (Mg2SiO4, olivine), orthoenstatite (Mg2SiO3, pyroxene), diopside (MgCaSi2O6, monoclinic pyroxene), and magnesite (MgCO3, carbonate) were impacted at speeds of 2.4 km/s, 2.6 km/s and 2.8 km/s. Impact experiments were conducted in the Johnson Space Center Experimental Impact Laboratory using the vertical gun. Clear signatures are observed in both the mid-IR spectra (shift in wavelengths of the spectral peaks and relative amplitude changes) of all minerals except magnesite, and in TEM images (planar dislocations) of both the forsterite and orthoenstatite samples. Further discussion on forsterite and enstatite analyses can be found in Jensen et al., this meeting.

Lederer, Susan M.↗
NASA NTRSDate not supplied

Xenoliths and Strange Cognate Lithologies – Or What the Heck is That?

Meteorites provide us with an unrepresentative sampling of the early solar system, but this problem can be partially remedied by exploiting the presence of small unusual pieces of cognate and foreign clasts found within meteorite regolith breccias (the latter being xenoliths). The xenoliths provide the opportunity to characterize a wide range of otherwise unsampled primitive small bodies. The cognate clasts (including the Dark Inclusions (DIs) found in CV and CR chondrites) reveal details of asteroidal evolution not recorded by the bulk of these meteorites.

M. Zolensky↗
NASA NTRS2019

A New Look at Aubrites: Investigating 3D Modal Mineralogy with X-Ray Computed Tomography

The aubrites (approximately 30 known meteorites) are a unique group of differentiated meteorites that formed on asteroids with oxygen fugacities (ƒO2) from approximately 2 to approximately 6 log units below the iron-wustite buffer. At these highly reduced conditions, elements deviate from the geochemical behavior exhibited at terrestrial ƒO2, forming FeO-poor silicates and exotic sulfides. While previous studies have described the petrology and 2D modal abundances of aubrites, this work investigates the 3D modal mineralogies of silicate, metal, and sulfide phases in aubrite samples, which are then compared to the available 2D data. In addition to 3D modal mineralogies, we have examined the geochemistry of fourteen aubrites, including mineral major-element compositions, bulk-rock compositions, and oxygen isotopic compositions to understand their formation and evolution at extreme ƒO2 conditions. We utilize X-ray computed tomography (XCT) to non-destructively analyze the distribution and abundances of mineral phases in aubrites and locate composite clasts of sulfide grains for future analytical study. In order to better constrain elemental behavior under reduced conditions, we specifically target minerals phases that comprise moderately volatile elements (i.e. oldhamite [CaS], caswellsilverite [NaCrS2] and djerfisherite [K6Na(Fe,Cu,Ni)25S26Cl]) as it has been shown that their geochemical behavior changes as a function of ƒO2. Currently, we have produced 3D scans of the Norton County aubrite. The results of the XCT data have allowed for the determination of the abundances of silicate groundmass (i.e., enstatite, forsterite, albite, and diopside), light (based on electron density) sulfides (i.e. alabandite [MnS] and daubréelite [FeCr2S4]), heavy (based on electron density) sulfides (i.e., troilite [FeS]), and Fe,Ni metal by segmenting a density histogram in Volume Graphics Studio software. XCT scans of additional aubrites are underway. By combining the 3D representation of the exotic phases found in aubrites with existing 2D characterizations, we are able to better determine modal abundances. By integrating 3D and 2D modal abundances and geochemistry, we can ultimately better constrain aubrite petrogenesis and elemental partitioning under reduced conditions. Furthermore, application of this new 3D approach offers the opportunity to identify and select clasts for future study prior to cutting the sample, which will minimize sample loss of this precious material.

Wilbur, Zoe↗
NASA NTRS1997

Exploration of Small Bodies

The Exploration of Small Bodies task is developing technologies required to perform in situ scientific investigations on small interplanetary objects such as comets and asteroids. This paper presents some of the efforts to date at NASA's Jet Propulsion Laboratory in developing a new landing system intended for use under milligravity conditions that will autonomously operate these systems.

small bodies Exploration of Small Bodies Task come↗
NASA NTRS2005

Atmospheric Fragmentation of the Gold Basin Meteoroid as Constrained from Cosmogenic Nuclides

Since the discovery of the Gold Basin L4 chondrite shower almost ten years ago in the northwestern corner of Arizona, many thousands of L-chondrite specimens have been recovered from an area of approx.22 km long and approx.10 km wide. Concentrations of cosmogenic 14C and 10Be in a number of these samples indicated a terrestrial age of approx.15,000 years and a large pre-atmospheric size [1]. Additional measurements of cosmogenic Be-10, Al-26, Cl-36, and Ca-41 in the metal and stone fractions of fifteen Gold Basin samples constrained the pre-atmospheric radius to 3-5 m [2]. This implies that Gold Basin is by far the largest stone meteorite in the present meteorite collection, providing us with an opportunity to study the fragmentation process of a large chondritic object during atmospheric entry. Knowledge about the fragmentation process provides information about the mechanical strength of large meteoroids, which is important for the evaluation of future hazards of small asteroid impacts on Earth and possible defensive scenarios to avoid those impacts.

Welten, K. C.↗
NASA NTRS2012

Regolith-Derived Heat Shield for Planetary Body Entry and Descent System with In Situ Fabrication

In this paper we will discuss a new mass-efficient and innovative way of protecting high-mass spacecraft during planetary Entry, Descent & Landing (EDL). Heat shields fabricated in situ can provide a thermal-protection system (TPS) for spacecraft that routinely enter a planetary atmosphere. By fabricating the heat shield with space resources from regolith materials available on moons and asteroids, it is possible to avoid launching the heat-shield mass from Earth. Two regolith processing and manufacturing methods will be discussed: 1) Compression and sintering of the regolith to yield low density materials; 2) Formulations of a High-temperature silicone RTV (Room Temperature Vulcanizing) compound are used to bind regolith particles together. The overall positive results of torch flame impingement tests and plasma arc jet testing on the resulting samples will also be discussed.

Hogue, Michael D.↗
NASA NTRSDate not supplied

Understanding the Heating Kinetics of Asteroid Ryugu By Comparison to Naturally and Experimentally Heated Meteorites

The Hayabusa2 mission visited the near-Earth Cb-type asteroid (162173) Ryugu and has returned to Earth surface material of Ryugu. Ryugu is an airless rubble pile asteroid exposed to space weathering [1]. Visible and near infrared remote observations recorded an absorption feature at 2.72 μm indicating the presence of OH– bearing hydrous components. The weak 2.72 μm feature suggested that Ryugu was once organic- and water-rich and subsequently dehydrated by a brief period of surficial heating with resemblance to “thermally metamorphosed carbonaceous chondrites”, “CI-/CM-like”, or “CY” chondrites [2, 3]. However, initial examination of the returned samples did not identify any significant heating of >150 °C [4, 5], and contrastingly, amino acid analysis of Ryugu samples suggested similarities to thermally-altered meteorites on the grounds of the predominant straight-chain n-ω-amino acid abundances [6]. In this study, we aim at addressing the nonconformal interpretations to the thermal history of Ryugu by comparing the organic composition of fresh Ryugu samples to that of chondritic meteorites that have been naturally (long-term radiogenic thermal metamorphism and short-term heating) and experimentally heated.

Q. H. S. Chan↗
NASA NTRS2012

Desert Research and Technology Studies Exposure of Lotus Coated Electrodynamic Shield Samples

The passive Lotus dust mitigation coating currently being developed at NASA's Goddard Space Flight Center (GSFC), was selected by the Habitation Demonstration Unit Deep Space Habitat (HDU-DSH) for participation in the 2011 Desert Research and Technology Studies (D-RaTS). Based on the unique surface architecture of the Lotus leaf, the nano-engineered Lotus coating seeks to replicate these structures on space flight and habitation surfaces. By decreasing both the surface energy and area for particle attachment, the Lotus coating greatly diminishes dust accumulation on surfaces. This is a problem that can be encountered on lunar, Martian, and asteroid missions. Two different application methods of this coating were tested in summer 2011 at the D-RaTS site: the wet chemistry applied version and combustion chemical vapor deposition (CCVD) applied version. These Lotus coatings, along with two common thermal control coatings, were combined with the active dust mitigation electrodynamic shield (EDS) technology developed at Kennedy Space Center (KSC). The EDS technology uses an electrified grid to remove dust particles from the surface of a Kapton (Trademark) substrate. The Lotus coating and thermal control coatings were applied to these Kapton (Trademark) substrates for testing. The combination of these two innovations was theorized to be an applicable countermeasure for addressing dust accumulation during long-duration human space exploration. This theory was tested and characterized prior to, during, and after D-RaTS exposure.

Margiotta, Danielle V.↗
NASA NTRSDate not supplied

Probabilistic Blast Damage Modeling Uncertainties and Sensitivities

Blast overpressure is the predominant source of ground damage posed by potentially hazardous asteroid strikes. Estimates of the extent, severity, and likelihoods of potential blast damage regions will be one of the key metrics needed to mount civil defense or disaster response plans in the face of an impending impact. However, there are many inherent sources of uncertainty in evaluating the damage, both in characterizing the properties of the incoming object and in the approaches used to model the entry/impact and resulting damage, which make it difficult to produce a single ‘accurate’ or ‘best guess’ prediction of ground damage. The current 2021 PDC hypothetical impact scenario poses a particular challenge due to its short warning time. The need for rapid disaster response to prepare for an immanent impact, combined with lack of observational opportunities to refine basic knowledge about the object’s basic size and properties, make understanding the range and relative likelihood of consequences particularly critical. The potential damage caused by these blasts can be evaluated using a range of modeling and simulation approaches and levels of fidelity. Fast-running engineering-level models can be used to run large numbers of probabilistically sampled cases covering wide variations of uncertain properties or parameters. High-fidelity simulations, on the other hand, can capture more detailed/accurate blast physics, but can only be performed for a small selection of specific cases, requiring many assumptions to be made about the initial object and its unpredictable entry/breakup characteristics. In order to provide a more complete picture of the potential threat for effective disaster response, both types of analysis need to be employed together. In this approach, high-fidelity simulations are used to refine and anchor engineering models, and the probabilistic engineering models are used to evaluate broad parameters spaces and guide selection of the most pertinent simulation cases for a given scenario. This presentation expands upon the probabilistic asteroid impact risk assessments being performed as part of the 2021 PDC hypothetical impact exercise, focusing on key aspects of blast damage modeling uncertainties and sensitivities. We review the current modeling and simulation approaches employed in the current assessment, compare the relative levels of uncertainty stemming from each main element of the problem (i.e., knowledge of the asteroid properties, modeling of the atmospheric entry/breakup and airburst, and estimates of the ground damage from the resulting blasts waves), and highlight any notable trends and sensitivities for the current scenario case.

SMD↗
DOE OSTI2021

The Encounter of the Parker Solar Probe and a Comet-like Object Near the Sun: Model Predictions and Measurements

The Parker Solar Probe (PSP) aims to explore the nascent solar wind close to the Sun. Meanwhile, PSP is also expected to encounter small objects like comets and asteroids. Here, we survey the ephemerides to find the chance of a recent encounter and then model the interaction between released dusty plasmas and solar wind plasmas. On 2019 September 2, a comet-like object, the 322P/Solar and Heliosphere Observatory, just passed its perihelion flying to a heliocentric distance of 0.12 au and swept by PSP at a relative distance as close as 0.025 au. We present the dynamics of the dust particles released from 322P, forming a curved dust tail. Along the path of PSP in the simulated inner heliosphere, the states of plasma and magnetic field are sampled and illustrated, with the magnetic field sequences from simulation results being compared directly with the in situ measurements from PSP. Through the comparison, we suggest that 322P might be at a deficient activity level releasing limited dusty plasmas on its way to becoming a "rock comet." We also present images of solar wind streamers as recorded by the Wide-field Imager for Solar Probe Plus, showing an indication of dust bombardment for the images superposed with messy trails. We observe from the Large Angle and Spectrometric Coronagraph that 322P was transiting from a dimming region to a relatively bright streamer during its perihelion passage, and perform a simulation to confirm that 322P was flying from relatively faster to slower solar wind streams, modifying the local plasma states of the streams.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Perspectives and Challenges in Bolide Infrasound Processing and Interpretation: A Focused Review with Case Studies

Infrasound sensing plays a critical role in the detection and analysis of bolides, offering passive, cost-effective global monitoring capabilities. Key objectives include determining the timing, location, and yield of these events. Achieving these goals requires a robust approach to detect, analyze, and interpret rapidly moving elevated sources such as bolides (also re-entry). In light of advancements in infrasonic methodologies, there is a need for a comprehensive overview of the characteristics that distinguish bolides from other infrasound sources and methodologies for bolide infrasound analysis. This paper provides a focused review of key considerations and presents a unified framework to enhance infrasound processing approaches specifically tailored for bolides. Three representative case studies are presented to demonstrate the practical application of infrasound processing methodologies and deriving source parameters while exploring challenges associated with bolide-generated infrasound. These case studies underscore the effectiveness of infrasound in determining source parameters and highlight interpretative challenges, such as variations in signal period measurements across different studies. Future research should place emphasis on improving geolocation and yield accuracy. This can be achieved through rigorous and systematic analyses of large, statistically significant samples of such events, aiming to resolve interpretative inconsistencies and explore the causes for variability in signal periods and back azimuths. The topic described here is also relevant to space exploration involving planetary bodies with atmospheres, such as Venus, Mars, and Titan.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2015

FINESSE: Field Investigations to Enable Solar System Science and Exploration

The FINESSE (Field Investigations to Enable Solar System Science and Exploration) team is focused on a science and exploration field-based research program aimed at generating strategic knowledge in preparation for the human and robotic exploration of the Moon, near-Earth asteroids (NEAs) and Phobos and Deimos. We follow the philosophy that "science enables exploration and exploration enables science." 1) FINESSE Science: Understand the effects of volcanism and impacts as dominant planetary processes on the Moon, NEAs, and Phobos & Deimos. 2) FINESSE Exploration: Understand which exploration concepts of operations (ConOps) and capabilities enable and enhance scientific return. To accomplish these objectives, we are conducting an integrated research program focused on scientifically-driven field exploration at Craters of the Moon National Monument and Preserve in Idaho and at the West Clearwater Lake Impact Structure in northern Canada. Field deployments aimed at reconnaissance geology and data acquisition were conducted in 2014 at Craters of the Moon National Monument and Preserve. Targets for data acquisition included selected sites at Kings Bowl eruptive fissure, lava field and blowout crater, Inferno Chasm vent and outflow channel, North Crater lava flow and Highway lava flow. Field investigation included (1) differential GPS (dGPS) measurements of lava flows, channels (and ejecta block at Kings Bowl); (2) LiDAR imaging of lava flow margins, surfaces and other selected features; (3) digital photographic documentation; (4) sampling for geochemical and petrographic analysis; (5) UAV aerial imagery of Kings Bowl and Inferno Chasm features; and (6) geologic assessment of targets and potential new targets. Over the course of the 5-week field FINESSE campaign to the West Clearwater Impact Structure (WCIS) in 2014, the team focused on several WCIS research topics, including impactites, central uplift formation, the impact-generated hydrothermal system, multichronometer dating of impact products, and using WCIS as an analog test site for crew studies of sampling protocols. The FINESSE team visited and mapped all of the major islands within West Clearwater Lake. Excellent cliff exposures around the coasts of many of the islands allowed a general stratigraphy of impactites to be defined. Notable differences to previous work includes the discovery of a monomict lithic breccia and a medium to coarse grained impact melt rock. In addition, ample rock samples were returned from West Clearwater for geochronology study. Geochronology work centers around laboratory analyses of these samples (and samples collected in the future or obtained from archives housed at the Canadian Geological Survey). Samples returned from the FINESSE field season have been evaluated for suitability for geochronologic analysis, and selected samples have been crushed for mineral separation and/or sawed for the preparation of polished petrologic thin sections. Heavy minerals (e.g., zircon, titanite, and apatite) will be separated from the crushed material for (U-Th)/He geochronology. The sections will be used for laser ablation 40Ar/39Ar research after neutron irradiation. This presentation will highlight the exciting science and exploration work conducted by FINESSE, as well as future plans for continued research.

Phobos & Deimos↗
NASA NTRS2003

The Meteoritic Component in Impact Deposits

This proposal requested support for a broad-based research program designed to understand the chemical and mineralogical record of accretion of extraterrestrial matter to the Earth. The primary goal of this research is to study the accretion history of the Earth, to understand how this accretion history reflects the long-term flux of comets, asteroids, and dust in the inner solar system and how this flux is related to the geological and biological history of the Earth. This goal is approached by seeking out the most significant projects that can be attacked utilizing the expertise of the PI and potential collaborators. The greatest expertise of the PI is the analysis of meteoritic components in terrestrial sediments. This proposal identifies three primary areas of research, involving impact events in the early Archean (3.2 Ga), the late Eocene (35 Ma) and the late Pliocene (2 Ma). In the early Archean we investigate sediments that contain the oldest recorded impacts on Earth. These are thick spherule beds, three of which were deposited within 20 m.y. If these are impact deposits the flux of objects to Earth at this time was much greater than predicted by current models. Earlier work used Cr isotopes to prove that one of these contain extraterrestrial matter, from a projectile with Cr isotopes similar to CV chondrites. We planned to expand this work to other spherule beds and to search for additional evidence of other impact events. With samples from D. Lowe (Stanford Univ.) the PI proposed to screen samples for high Ir and Cr so that appropriate samples can be provided to A. Shukolyukov for Cr-isotopic analyses. This work was expected to provide evidence that at least one interval in the early Archean was a period of intense bombardment and to characterize the composition of objects accreted. The late Eocene is also a period of intense bombardment with multiple spherule deposits and two large craters. Farley et al. (1998) demonstrated an increased (3)He flux to marine sediments that was attributed to an increase in interplanetary dust due to a shower of comets invading the inner solar system. We planned to detect a change in the Cr-isotopic composition in the flux of fine-grained extraterrestrial matter to ocean sediments. This would provide evidence for the comet shower hypothesis. We planned attempt to locate late Eocene impact deposits in a new high resolution, hi-latitude site that had the potential for excellent preservation and new information of the sources and effects of these impacts. Although most impacts on Earth occur in deep-ocean basins, only one such event is known - the late Pliocene impact of the Eltanin asteroid. The ejecta from this impact includes Ir- rich impact melt, spherules, and actual meteorites from the km-sized mesosiderite asteroid. Through a study of the ejecta, we can learn about the formation, distribution, alteration and preservation of Ir-rich deposits. We can also learn about meteorite survival during hypervelocity impacts and we can study pieces of a km-sized object to learn more about the mesosiderite parent body. Analyses of sediment cores and geophysical exploration of the impact site can further our understanding of the processes involved in deep-ocean impacts and potential effects on the terrestrial climate and biosphere. We planned analyses of this ejecta, a search for ejecta 5000 km distant from the impact area, and a new oceanographic expedition to study and sample the impact site. In addition to these three specific areas of research, the PI planned to remain flexible and available to exploit new opportunities presented by new discoveries, and to engage in new collaborations if other researchers require his expertise to develop new projects that fit within the objectives of the overall research program.

Kyte, Frank T.↗
NASA NTRS1973

The cometary and asteroidal origins of meteors

A quantitative examination of the gravitational and nongravitational changes of orbits shows that for larger interplanetary bodies the perturbations by Jupiter strongly predominate over all other effects, which include perturbations by other planets, splitting of comet nuclei and jet effects of cometary ejections. The structure of meteor streams, indicates that the mutual compensation of the changes in individual elements entering the Jacobian integral, which is characteristic for the comets, does not work among the meteoroids. It appears that additional forces of a different kind must exert appreciable influence on the motion of interplanetary particles of meteoroid size. Nevertheless, the distribution of the Jacobian constant in various samples of meteor orbits furnishes some information on the type of their parent bodies and on the relative contribution of individual sources.

Kresak, L.↗
NASA NTRS2020

Volatile-rich Asteroids in the Inner Solar System

Bennu (101195), target of the Origins, Spectral Interpretation, Resource Identification, Security, Regolith Explorer (OSIRIS-REx) mission, is a type-B asteroid with abundant spectral evidence for hydrated silicates, low thermal inertia “boulders” and frequent bursts of particle emission. We suggest that Bennu’s parent body formed in the outer solar system before it was perturbed into the asteroid belt and then evolved into a near-Earth object. We show that this is consistent with models of planetesimal evolution. Bennu has many characteristics expected for a dormant comet, and could potentially contain a minimum of 1 wt.% adsorbed water if its gross mineralogy is consistent with the Orgueil meteorite. This is in addition to any ice or water contained within the hydrous minerals themselves. Based on this hypothesis, we predict the properties of the samples that will be returned to Earth by the OSIRIS-REx mission, including abundant phyllosilicate minerals, amorphous hydrated silicates and low-density, very high-porosity aggregates, already observed by the OSIRIS-REx instrument suite. We predict enrichments in D/H and 15N/14N, high C/Mg ratios (>∼7 wt%), and a greater range of organic compositions than found in meteorites, including an organic component poor in aromatics, and a more labile organic fraction. Ammonium salts, ranging from NH4Cl to ammonium–organic acid salts could carry much of the nitrogen in comets, yet only NH4CH3COO and heavier salts are sufficiently stable to be found in these returned samples. Water adsorbed onto highly porous grains should also be detected provided that the sample return capsule remains below 300 K during Earth return, and this water should be isotopically heavy.

Joseph A. Nuth, III↗