Search NASA⌕ Search

SEARCH · Search NASA

Results for “cell integration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Quantification of [MTBD][beti] loading and its effects on Pt/HSC electrode performance in hydrogen fuel cells

High surface area carbon-supported platinum catalysts (Pt/HSC) are widely used in polymer electrolyte membrane fuel cells but often suffer from limited proton and oxygen transport within porous domains. To address these challenges, we integrate the ionic liquid [MTBD][beti] into Pt/HSC catalyst layers using two deposition methods-one-pot and sequential deposition-to tune IL distribution within micropores and mesopores. A combination of ex situ and in operando techniques were employed to elucidate electrode structure-performance relationships across a range of IL loadings. Sequential deposition achieved more efficient pore filling and higher IL retention at lower IL:C ratios, enabling enhanced proton conductivity and protection of active sites. Compared to the IL-free Pt/HSC, IL-modified electrodes demonstrated up to 28% improvement in mass activity and enhanced high-current-density performance under low relative humidity, while maintaining comparable performance under humidified conditions. Electrochemical impedance spectroscopy and CO displacement experiments reveal that improvements are linked to reduced ionic resistance and lower sulfonate adsorption on Pt sites, rather than changes in electrochemical surface area. However, excessive IL loading leads to mass transport losses. These results highlight the importance of selective pore filling and efficient IL distribution in achieving kinetic gains without compromising ionic and gas transport.

08 HYDROGEN↗
DOE OSTI2025

Turbulence and transport in mirror geometries in the Large Plasma Device

Thanks to advances in plasma science and enabling technology, mirror machines are being reconsidered for fusion power plants and as possible fusion volumetric neutron sources. However, cross-field transport and turbulence in mirrors remains relatively understudied compared with toroidal devices. Turbulence and transport in mirror configurations were studied utilizing the flexible magnetic geometry of the Large Plasma Device (LAPD). Multiple mirror ratios from $M=1$ to $M=2.68$ and three mirror-cell lengths from $L=3.51$ to $L=10.86$ m were examined. Langmuir and magnetic probes were used to measure profiles of density, temperature, potential and magnetic field. The electric field-fluctuation-driven ${\tilde {\boldsymbol{E}}} \times {\boldsymbol{B}}$ particle flux, where $\boldsymbol{B}$ is the background field, was calculated from these quantities. Two probe correlation techniques were used to infer wavenumbers and two-dimensional structure. Cross-field particle flux and density fluctuation power decreased with increased mirror ratio. Core density and temperatures remain similar with mirror ratio, but radial line-integrated density increased. The physical expansion of the plasma in the mirror cell by using a higher field in the source region may have led to reduced density fluctuation power through the increased gradient scale length. This increased scale length reduced the growth rate and saturation level of rotational interchange and drift-like instabilities. Despite the introduction of magnetic curvature, no evidence of mirror-driven instabilities – interchange, velocity space or otherwise – were observed. For curvature-induced interchange, many possible stabilization mechanisms were present, suppressing the visibility of the instability.

Travis, Phil (ORCID:0000000343170432)↗
DOE OSTI2025

Optimizing energy yield of monolithic perovskite/silicon tandem solar cells in real-world Conditions: The impact of luminescent coupling

Efficient light management is key to maximizing power conversion efficiency (PCE) in monolithic perovskite/silicon tandem solar cells. Achieving peak efficiency requires closely matched current generation in all junctions, especially in integrated configurations. However, real-world conditions vary significantly due to factors such as sunlight spectrum, diffuse-to-direct sunlight ratio, angular distribution of light, subcell temperature coefficients, and ground reflection. This study introduces a comprehensive optical and device simulation to optimize perovskite/silicon tandem cells, considering experimental luminescent coupling (LC) efficiency and its dependence on working conditions, alongside variations in radiative recombination, effect of temperature on absorptivity spectra, and cloud cover. Our results show potential energy yield improvements of up to 1.4 % with LC, based on current perovskite radiative recombination records, and up to 4 % with direct bandgap materials. Although radiative recombination's dependence on excitation intensity reduces output power and requires thicker absorbers, LC compensates for these losses. LC also lowers the optimized bandgap for the perovskite top cell from 1.72 eV to 1.64–1.68 eV, or even lower in regions with redshifted irradiance. Additionally, optimization revealed that thinner silicon bottom cells require a higher perovskite top cell bandgap, impacting the balance between fabrication cost and cell stability.

14 SOLAR ENERGY↗
DOE OSTI2022

Representative-cell-based Modeling of HTTF in SAM

Although the current nuclear power market is primarily occupied by the light water reactors (LWRs), the TRISO-fueled helium-cooled graphite-moderated high temperature gas reactors (HTGRs) are drawing growing attention as the nuclear power industry marches towards more advanced systems. Compared to that of conventional LWRs, the thermal hydraulics of HTGR cores show extra complexity from their multi-scale heat transfer mechanisms with varying importance during different operation modes or transient stages. The modeling of HTGR cores for the system analysis purpose therefore faces the challenge of reaching reasonable fidelity and accuracy while maintaining sufficient simplicity. Previous development and validation efforts have demonstrated that a “2-D ring model” with reasonable performance can be implemented in the System Analysis Module (SAM) for prismatic HTGR cores. In the current project, an alternative modeling methodology based on “representative cells” is proposed for the typical prismatic core of HTGRs. Different from the previous ring model approach, the proposed methodology first separately models and then combines the small- and large-scale thermal conductions, by connecting representative local heat transfer units (cells) with effective core- wise thermal resistance. A modeling practice for an integral high-temperature test facility (HTTF) elaborates the modeling details. Steady-state validation of the resultant candidate model is performed against a higher-resolution benchmark from a 3D-1D coupled simulation, which shows satisfactory prediction with reasonably captured global parameters and well-represented temperature fields. A postulated pressurized conduction cooldown (PCC) is also simulated and analyzed, demonstrating the model’s capability of transient prediction with physically captured phenomena resolved in both small and large temporal and spatial scales. In general, the current work achieves a preliminary success in proposing a methodology using representative cells to model prismatic HTGR cores in SAM. Future efforts are envisioned with more validation activities and with potential modeling improvements to eventually achieve the high confidence on a high-fidelity robust modeling methodology with reasonable accuracy.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2019

Advanced Bottom‐Up Engineering of Living Architectures

Abstract Bottom‐up tissue engineering is a promising approach for designing modular biomimetic structures that aim to recapitulate the intricate hierarchy and biofunctionality of native human tissues. In recent years, this field has seen exciting progress driven by an increasing knowledge of biological systems and their rational deconstruction into key core components. Relevant advances in the bottom‐up assembly of unitary living blocks toward the creation of higher order bioarchitectures based on multicellular‐rich structures or multicomponent cell–biomaterial synergies are described. An up‐to‐date critical overview of long‐term existing and rapidly emerging technologies for integrative bottom‐up tissue engineering is provided, including discussion of their practical challenges and required advances. It is envisioned that a combination of cell–biomaterial constructs with bioadaptable features and biospecific 3D designs will contribute to the development of more robust and functional humanized tissues for therapies and disease models, as well as tools for fundamental biological studies.

Gaspar, Vítor M.↗
NASA NTRS1975

Design automation techniques for custom LSI arrays

The standard cell design automation technique is described as an approach for generating random logic PMOS, CMOS or CMOS/SOS custom large scale integration arrays with low initial nonrecurring costs and quick turnaround time or design cycle. The system is composed of predesigned circuit functions or cells and computer programs capable of automatic placement and interconnection of the cells in accordance with an input data net list. The program generates a set of instructions to drive an automatic precision artwork generator. A series of support design automation and simulation programs are described, including programs for verifying correctness of the logic on the arrays, performing dc and dynamic analysis of MOS devices, and generating test sequences.

Feller, A.↗
DOE OSTI2023

Observations and Lessons Learned From Installing Residential Roofing-Integrated Photovoltaics

Building-sited solar photovoltaics (PV) could play a key role in decarbonizing the building sector either through racked and mounted PV or through Building-integrated PV (BIPV). BIPV is installed into the building envelope itself, with solar cells and/or modules forming the outer layer of a building structure, thus transforming a single-purpose structure into one that serves the dual purposes of the building envelope and electricity. BIPV can be applied to building roofs, facades, awnings, pergolas, windows, skylights, balustrades, and other external surfaces. Given BIPV products vary widely, the focus of this research is residential roofing integrated PV (RIPV), where solar is incorporated into or otherwise replaces the roofing material. Previous research suggests that residential RIPV could reduce customer acquisition, labor, supply chain, and equipment costs. These products have yet to realize these cost savings and deployment remains significantly less than conventional rooftop PV as a relative share of the addressable market in the US. One potential barrier to broader residential roofing integrated PV deployment may be higher costs relative to conventional rooftop PV, primarily because the design and installation of these products is still evolving. Here, we explore residential RIPV cost-reduction opportunities by analyzing installation processes. Our study documents residential RIPV installations at 2 reroofing sites and the equivalent of 9 new construction sites in California through a methodology known as time and motion study. We also conducted interviews with subject-matter experts to identify barriers and solutions to maximize these products' market penetration. Our time and motion study breaks the RIPV installation process into four steps: 1) staging, unloading, and roof preparation; 2) fire resistant underlayment(s) (synthetic material laid between roof shingles and roof deck); 3) flashings and PV installation; and 4) wiring and monitoring. We measure the time required for each step in terms of worker-hours, representing an hour of labor from a single worker. We further normalize process time by dividing worker-hours by kilowatt (kW) of system capacity. The most time-intensive step was flashings and PV installation, taking around 2.4 worker-hours per kW on average and accounting for around 60% of the process time for an average installation. The total installation process took on average about 6.4 and 3.5 worker-hours per kW at the reroofing sites and new construction sites, respectively. For comparison, a previous time and motion study documented a time of 6.9 worker-hours per kW for conventional rooftop PV. The shorter RIPV installation times are consistent with previous studies suggesting that RIPV could be installed faster than conventional rooftop PV. The time and motion results and feedback from interviewees provide insights into potential residential RIPV cost reduction opportunities. Several interviewees suggested that these products would be more efficient if PV installation was more fully integrated into the roofing/construction industries, which currently use separate supply chains and skillsets. Further integration could reduce supply chain delays and labor force redundancies. Future research could explore specific ways to integrate these industries to help realize the cost savings potential of RIPV.

14 SOLAR ENERGY↗
DOE OSTI2023

ARIES/Flatirons Facility - Hydrogen System Capability Buildout

Under the "Advanced Research on Integrated Energy Systems" (ARIES) initiative, hydrogen system capabilities including a MW-scale electrolyzer, storage system, and MW-scale fuel cell generator will be designed and commissioned at NREL's Flatirons Campus. This hydrogen infrastructure will support H2@Scale goals by enabling integrated systems R&D to study the science of scaling for hydrogen energy systems.The system is designed with flexibility to provide a testbed to demonstrate systems integration, grid services, energy storage, direct renewable hydrogen production, and innovative end use applications (e.g. HD transportation, natural gas blending, etc.).

Advanced Research on Integrated Energy Systems↗
DOE OSTI2022

Multicycle flash sintering of cubic Y 2 O 3 -stabilized ZrO 2 : An in situ energy dispersive synchrotron x-ray diffraction study with high temporal resolution

The current induced unit cell volume changes, (111) Bragg peak full width at half maximum (FWHM) and its integrated intensity in 8 % Y 2 O 3 stabilized ZrO 2 (8 %YSZ) solid state electrolyte was monitored during a triple-flash sintering experiment by in situ energy dispersive x-ray diffraction using a polychromatic synchrotron probe (max, photon energy 200 keV) with 2 second temporal resolution. The first spontaneous singularity in the unit cell volume (+0.54 %) was observed at 899 °C under 15 V/mm applied field intensity, which was associated with 13 mA/mm 2 current draw and an increase in density to 97 %. Following anelastic relaxation of the unit cell volume under open circuit conditions, the same applied field was applied twice in a row which resulted in additional induced singularities at 925 °C (+0.48 %) and 944 °C (+0.42 %). A floating baseline, which was above the thermal expansion baseline, was observed from 833 to 969 °C and was attributed to Joule heating. In conclusion, the singularity at 899 °C is associated with a sharp change in (111) FWHM and a 34 % decrease in integrated peak area that was attributed to changes in the distribution of oxygen vacancies and the changes in their concentration as induced by the applied field in the spontaneous transient stage of flash sintering.

36 MATERIALS SCIENCE↗
NASA NTRS2012

Demonstration of Passive Fuel Cell Thermal Management Technology

The NASA Glenn Research Center is developing advanced passive thermal management technology to reduce the mass and improve the reliability of space fuel cell systems for the NASA Exploration program. The passive thermal management system relies on heat conduction within highly thermally conductive cooling plates to move the heat from the central portion of the cell stack out to the edges of the fuel cell stack. Using the passive approach eliminates the need for a coolant pump and other cooling loop components within the fuel cell system which reduces mass and improves overall system reliability. Previous development demonstrated the performance of suitable highly thermally conductive cooling plates and integrated heat exchanger technology to collect the heat from the cooling plates (Ref. 1). The next step in the development of this passive thermal approach was the demonstration of the control of the heat removal process and the demonstration of the passive thermal control technology in actual fuel cell stacks. Tests were run with a simulated fuel cell stack passive thermal management system outfitted with passive cooling plates, an integrated heat exchanger and two types of cooling flow control valves. The tests were run to demonstrate the controllability of the passive thermal control approach. Finally, successful demonstrations of passive thermal control technology were conducted with fuel cell stacks from two fuel cell stack vendors.

Burke, Kenneth A.↗
NASA NTRS2010

Acoustic Liner for Turbomachinery Applications

The purpose of this innovation is to reduce aircraft noise in the communities surrounding airports by significantly attenuating the noise generated by the turbomachinery, and enhancing safety by providing a containment barrier for a blade failure. Acoustic liners are used in today's turbofan engines to reduce noise. The amount of noise reduction from an acoustic liner is a function of the treatment area, the liner design, and the material properties, and limited by the constraints of the nacelle or casement design. It is desirable to increase the effective area of the acoustic treatment to increase noise suppression. Modern turbofan engines use wide-chord rotor blades, which means there is considerable treatment area available over the rotor tip. Turbofan engines require containment over the rotors for protection from blade failure. Traditional methods use a material wrap such as Kevlar integrated with rub strips and sometimes metal layers (sandwiches). It is possible to substitute the soft rub-strip material with an open-cell metallic foam that provides noise-reduction benefits and a sacrificial material in the first layer of the containment system. An open-cell foam was evaluated that behaves like a bulk acoustic liner, serves as a tip rub strip, and can be integrated with a rotor containment system. Foams can be integrated with the fan-containment system to provide sufficient safety margins and increased noise attenuation. The major innovation is the integration of the foam with the containment.

Huff, Dennis L.↗
NASA NTRS1986

The effects of gravity level during directional solidification on the microstructure of hypermonotectic Al-In-Sn alloys

Five hypermonotectic Al-In-Sn compositions were directionally solidified in a Bridgman-type furnace at normal gravity and during aircraft low-gravity maneuvers. The tendency of the Al-30In alloy to form an indium-rich band at the start of unidirectional growth (SUG) made it difficult to study the integration of L sub 2 into the solidification interface. Hypermonotectic compositions closer to monotectic slightly hypermonotectic caused only a partial band on L sub 2 to form at SUG and allowed the study of such variables as gravity, composition, and monotectic dome height on integration of excess L sub 2 into the solid plus L sub 2 interface. It was found that formation of aligned composite structures for the Al-In-Sn system is not only a function of G and R but also of the degree to which the composition varies from monotectic. Most of the aligned fibrous structures formed from hypermonotectic Al-In-Sn had spacings that were of the order of irregular fibrous structures reported for on monotectic Al-In-Sn. The spacings for the large fibers and aligned globules found for ground and low-gravity processed Al-In-18-Sn-22, respectively, were significantly larger than the others measured and were of the order expected for cell spacings under the growth conditions utilized. It was found that the integration into the solidification front of excess L sub 2 in low gravity was a function of the Sn composition of the alloy.

Curreri, P. A.↗
NASA NTRS2001

Extracellular signaling through the microenvironment: a hypothesis relating carcinogenesis, bystander effects, and genomic instability

Cell growth, differentiation and death are directed in large part by extracellular signaling through the interactions of cells with other cells and with the extracellular matrix; these interactions are in turn modulated by cytokines and growth factors, i.e. the microenvironment. Here we discuss the idea that extracellular signaling integrates multicellular damage responses that are important deterrents to the development of cancer through mechanisms that eliminate abnormal cells and inhibit neoplastic behavior. As an example, we discuss the action of transforming growth factor beta (TGFB1) as an extracellular sensor of damage. We propose that radiation-induced bystander effects and genomic instability are, respectively, positive and negative manifestations of this homeostatic process. Bystander effects exhibited predominantly after a low-dose or a nonhomogeneous radiation exposure are extracellular signaling pathways that modulate cellular repair and death programs. Persistent disruption of extracellular signaling after exposure to relatively high doses of ionizing radiation may lead to the accumulation of aberrant cells that are genomically unstable. Understanding radiation effects in terms of coordinated multicellular responses that affect decisions regarding the fate of a cell may necessitate re-evaluation of radiation dose and risk concepts and provide avenues for intervention.

NASA Discipline Radiation Health↗
DOE OSTI2023

Controlling Mass Transport in Direct Carbon Dioxide Zero-Gap Electrolyzers via Cell Compression

The development of high-performance CO 2 electrolyzers is crucial for accelerating the sustainable production of fuels and chemicals integrated with renewable energy sources. Here, we introduce a methodology to actively control mass transport inside a realistic zero-gap membrane electrode assembly of a CO 2 electrolyzer by varying the gasket thickness, which consequently changes the cell compression. This allows control over the thickness and porosity of the gas diffusion electrodes, influencing the overall electrolyzer performance, as demonstrated using Ag-deposited electrodes. At low operating voltages (<2.9 V), both high- and low-compression electrolyzers exhibit similar faradaic efficiencies and partial current densities for CO formation. However, at high voltages, the low-compression electrolyzer with high electrode porosity demonstrates superior CO selectivity and activity with suppressed H 2 formation. These experimental results are validated by the computational membrane electrode assembly (MEA) model developed by using the measured in situ electrode thicknesses and electrode porosities. Additionally, liquid electrolyte saturation at the catalyst layer is found to play a dominant role in determining the mass transport, resulting in a decreased electrolyzer performance with low electrode porosity. Finally, the systematic investigation in this study improves the understanding of the transport dynamics in MEA-based devices and provides insights into optimizing device design parameters for industry-relevant CO 2 electrolysis.

30 DIRECT ENERGY CONVERSION↗
NASA NTRS1978

Production technology for high efficiency ion implanted solar cells

Ion implantation is being developed for high volume automated production of silicon solar cells. An implanter designed for solar cell processing and able to properly implant up to 300 4-inch wafers per hour is now operational. A machine to implant 180 sq m/hr of solar cell material has been designed. Implanted silicon solar cells with efficiencies exceeding 16% AM1 are now being produced and higher efficiencies are expected. Ion implantation and transient processing by pulsed electron beams are being integrated with electrostatic bonding to accomplish a simple method for large scale, low cost production of high efficiency solar cell arrays.

Kirkpatrick, A. R.↗
DOE OSTI2026

Lattice-Oxygen-Driven Selective Oxidation Strategy for Stable Argyrodite Solid-State Lithium Metal Batteries

All-solid-state lithium metal batteries (ASSLMBs) with Li6PS5Cl argyrodite electrolytes and high-voltage LiNi0.8Mn0.1Co0.1O2 (NMC811) cathodes offer high energy density but suffer from rapid capacity fading due to the layered-to-rock-salt transition of NMC811 and structural degradation of Li6PS5Cl from parasitic interfacial reactions. Here, we demonstrate a catholyte engineering strategy using a Li2S scavenging additive to suppress interfacial reactivity and preserve the structural and electrochemical stability of both NMC811 and Li6PS5Cl. Incorporating 0.10 wt.% Li2S enables exceptional cycling stability, achieving 76% capacity retention after 550 cycles at C/10 and 88% retention after 800 cycles at C/3 at 60 degrees C, compared with rapid failure in pristine cells. Spectroscopic, electrochemical, and morphological analyses confirm that Li2S maintains electrode integrity by sustaining particle contact and suppressing phase decomposition. This work elucidates interfacial degradation pathways in NMC811/argyrodite systems and introduces a low-cost, scalable strategy to stabilize nickel-rich oxide cathodes in ASSLMBs, advancing their practical viability.

25 ENERGY STORAGE↗
DOE OSTI2026

EEPD1 evolved a unique DNA clamping dimer protecting reversed replication forks

Exonuclease/endonuclease/phosphatase (EEP)-fold hydrolases are canonically monomeric phosphodiesterases exemplified by APE1, DNase I, and TDP2 nucleases. While EEP family domain containing protein 1 (EEPD1) acts in DNA stress responses, its proposed nuclease activities are enigmatic. Here, we integrate hybrid structural methods, evolution, biochemistry, cancer genomics, plus molecular and cell biology to define EEPD1 structure, assembly, and function at stalled DNA replication forks. Results imply EEPD1 surprisingly requires both unique EEP domain dimer and distinctive tandem Helix-hairpin-Helix [(HhH) 2 ] domains to clamp double-stranded (ds) DNA at reversed DNA replication forks for fork protection. Small-angle X-ray Scattering (SAXS), crystal, and cryo-EM structures unveil an unprecedented tryptophan handshake dimer, conserved interface di-Trp-Pro pocket, and adjustable “wrist” enabling an open-closed conformational switch. EEPD1 dimer cooperatively binds complex dsDNA replication fork intermediates but alone lacks nuclease activity due to loss of key EEP catalytic residues during Metazoan evolution and atmospheric oxygen buildup. Instead, EEPD1 prevents nucleolytic degradation of reversed replication forks by MRE11. Furthermore, cancer bioinformatics support oxidative damage-dependent EEPD1 association as a significant modulator of overall patient survival. Collective findings uncover unexpected EEP dimer and fork protection function in clamping, not cleaving, reversed replication forks for metazoan oxidative stress responses controlling genome stability and cancer outcomes.

Shen, Runze [Univ. of Texas, Houston, TX (United S↗
DOE OSTI2023

The iron spin transition of deep nitrogen-bearing mineral Fe3N1.2 at high pressure

Abstract Nitrogen is an essential element for life, one of the most abundant volatiles in the atmosphere, and an important component in the Earth’s interior, where iron nitride is an essential host of deep nitrogen. Here, we investigate the pressure-induced electronic spin-pairing transition of iron in siderazot (Fe3N1.2) at pressures up to 45.8 GPa at room temperature, using diamond-anvil cell techniques coupled with synchrotron X-ray emission spectroscopy. The integrated intensity of the satellite emission peak (K′β) decreases upon compression but remains unchanged at pressures greater than 30.5 GPa. In other words, the high-spin to low-spin transition of iron in Fe3N1.2 starts immediately at very low pressures and completes at ~30.5 GPa. The iron spin transition completion pressures increase with the nitrogen concentration of hexagonal close-packed iron nitrides (i.e., Fe3N1.2, Fe7N3, and Fe2N). Moreover, the identity and concentration of light elements in binary iron-rich compounds such as Fe3N, Fe3C, Fe3P, Fe3S, Fe7C3, and Fe7N3, together with their crystal structure, could affect the iron spin transition pressures. The spin transition of iron-rich alloys could alter the bonding nature and the physical properties, including the thermal and electrical conductivity, thereby influencing the thermal state and evolution of planetary interiors.

Geochemistry & Geophysics↗