Search NASA⌕ Search

SEARCH · Search NASA

Results for “composite cathode”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Products of Dissociative Recombination in the Ionosphere

SRI International undertook a novel experimental measurement of the product states formed by dissociative recombination (DR) of O2(+), NO(+), and N2(+) as a function of both electron energy and reactant ion vibrational level. For these measurements we used a recently developed experimental technique for measuring dissociation product distributions that allows both the branching ratios to be accurately determined and the electronic and rovibrational state composition of the reactant ions to be specified. DR is the dominant electron loss mechanism in all regions of the ionosphere. In this process, electron attachment to the molecular ion produces an unstable neutral molecule that rapidly dissociates. For a molecular ion such as O2(+), the dissociation recombination reaction is (1) O2(+) + e yields O + O + W. The atomic products of this reaction, in this case two oxygen atoms, can be produced in a variety of excited states and with a variety of kinetic energies, as represented by W in Eq. (1). These atoms are not only active in the neutral chemistry of the ionosphere, but are also especially important because their optical emissions are often used to infer in situ concentrations of the parent molecular ion and ambient electron densities. Many laboratory measurements have been made of DR reaction rates under a wide range of electron temperatures, but very little is known about the actual distributions among the final states of the atomic products. This lack of knowledge seriously limits the validity and effectiveness of efforts to model both natural and man-made ionospheric disturbances. Bates recently identified major deficiencies in the currently accepted branching ratios for O2(+) as they relate to blue and green line emission measurements in the nocturnal F-region. During our two-year effort, we partially satisfied our ambitious goals. We constructed and operated a variable pressure, electron-impact ion source and a high pressure, hollow-cathode discharge ion source for O2(+), NO(+), and N2(+) beams. Translational spectroscopy of the products of dissociative charge transfer in Cs vapor was used to accurately assay the composition of the O2(+) and NO(+) beams and to develop a methodology for the vibrationally controlled preparation of the ground state ion beams. Attempts to assay the N2(+) beam revealed a novel two-electron process in the charge transfer reactions. A coaxial electron gun for the DR measurements was constructed following an extensive numerical design of the fields. Tests of the gun, however, found substantial perturbations of the magnetic fields by the soft iron (CMI-C) assembly containing the Langmuir probe that locates the electron beam. Hydrogen annealing of the iron failed to eliminate the field perturbations, necessitating the removal of the probe assembly. During this work on the coaxial electron gun, we discovered that predissociated high Rydberg states of O2 could be produced by subjecting the molecules to a sudden perturbation by an electromagnetic field. This technique allowed a measurement of the product branching to the atomic limits for the lowest seven vibrational levels of O2(+).

Cosby, Philip↗

Synthesis and Mg 2+ deintercalation in manganese spinel nanocrystals

Transition metal oxides are promising materials as cathodes for divalent batteries with high capacity under high voltage. A major challenge is the sluggish kinetics of intercalation of divalent cations into the oxide host. Tailoring of the size, composition and crystal structure of oxides is a necessary strategy to alleviate these barriers, which challenges our control of their synthesis. In this work, we selectively synthesize spinel-type Mg x Mn 3-x O 4 nanocrystals with different Mg/Mn ratios and investigate their ability to electrochemically shuttle Mg 2+ ions. Crystal-chemical characterization of the reaction outcomes was conducted with X-ray diffraction, X-ray absorption spectroscopy, electron microscopy, and elemental analysis. Both 5 nm thick MgMn 2 O 4 nanosheets and 10 nm Mg 0.41 Mn 2.59 O 4 nanocubes underwent reversible Mg 2+ deintercalation, yet no obvious reaction was observed in 60 nm Mg 1.2 Mn 1.8 O 4 nanocubes. Our results suggest that both the size of the spinel nanocrystals and the Mg/Mn ratios play a role in the observed behaviour. The advances in the synthesis of spinel oxide nanocrystals achieved, and their correlation with Mg 2+ deintercalation, pave the way toward the precise synthesis of multivalent cathode materials that fundamentally overcome barriers to practical application.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hybrid Doping Strategy with High‐Entropy Cu/Fe Surface Modification and Zr Bulk Incorporation for Ni‐Rich Cathodes

A hybrid doping strategy combining Zr 4+ bulk doping with high-entropy Cu 2+ /Fe 3+ surface doping is developed to enhance the structural and interfacial stability of Ni-rich layered oxide cathodes. Cu and Fe are selectively introduced at the particle surface via a surface-selective ion-exchange process, forming a ≈15 nm Fe-rich layer while preserving the layered framework. Compared to the pristine cathode, the hybrid sample exhibits significantly improved electrochemical performance in both half-cell and full-cell configurations. In half-cells, the hybrid retains 88.5% and 90.2% after 100 cycles at 1C under 4.6 and 4.5 V, respectively. During high-voltage full-cell cycling, the hybrid cathode maintains over 80% capacity retention, whereas the pristine counterpart retains less than 10% under identical conditions over the same cycling period. XPS, EELS, and DEMS analyses confirm improved oxygen retention, suppressed gas evolution, and stable surface chemistry, while DFT calculations indicate enhanced Me–O bonding in the selected Fe 0.75 Cu 0.25 (Mn 1/16 Co 2/16 Ni 13/16 )O 2 surface composition, which is identified through DFT-calculated mixing energy reaching a minimum at this ratio, indicating the most thermodynamically favorable configuration. In conclusion, these results demonstrate the effectiveness of this hybrid doping strategy in mitigating coupled degradation pathways in Ni-rich cathodes.

15 GEOTHERMAL ENERGY↗

Chemical Evolution in Silicon–Graphite Composite Anodes Investigated by Vibrational Spectroscopy

Silicon–graphite composites are under development for the next generation of high-capacity lithium-ion anodes, and vibrational spectroscopy is a powerful tool to identify the different mechanisms that contribute to performance loss. With alloy anodes, the underlying causes of cell failure are significantly different in half-cells with lithium metal counter electrodes compared to full cells with standard cathodes. However, most studies which take advantage of vibrational spectroscopy have only examined half-cells. In this work, a combination of FTIR and Raman spectroscopy describes several factors that lead to degradation in full pouch cells with LiNi 0.5 Mn 0.3 Co 0.2 O 2 (NMC532) cathodes. The spectroscopic signatures evolve after longer term cycling compared to the initial formation cycles. Several side-reactions that consume lithium ions have clear FTIR signatures, and comparison to a library of reference compounds facilitates identification. Raman microspectroscopy combined with mapping shows that the composite anodes are not homogeneous but segregate into graphite-rich and silicon-rich phases. Lithiation does not proceed uniformly either. A basis analysis of Raman maps identifies electrochemically inactive regions of the anodes. In conclusion, the spectroscopic results presented here emphasize the importance of improving electrode processing and SEI stability to enable practical composite anodes with high silicon loadings.

25 ENERGY STORAGE↗

Strong, Tough Glass Composites Developed for Solid Oxide Fuel Cell Seals

A fuel cell is an electrochemical device that continuously converts the chemical energy of a fuel directly into electrical energy. It consists of an electrolyte, an anode, and a cathode. Various types of fuel cells are available, such as direct methanol fuel cells, alkaline fuel cells, proton-exchange-membrane fuel cells, phosphoric acid fuel cells, molten carbonate fuel cells, and solid oxide fuel cells (SOFCs). The salient features of an SOFC are all solid construction and high-temperature electrochemical-reaction-based operation, resulting in clean, efficient power generation from a variety of fuels. SOFCs are being developed for a broad range of applications, such as portable electronic devices, automobiles, power generation, and aeronautics.

Bansal, Narottam P.↗

Development and Characterization of High Performance and Robust Mixed Conducting Cathodes Supportive of Lower Cost Solid Oxide Fuel Cells (Final Report)

The objective of the proposed research is to advance an existing partnership between the University of South Carolina (USC) and LG Fuel Cell Systems, Inc. (LGFCS) to research and develop mixed electronic and ionic conducting cathode materials for durable and robust low-cost solid oxide fuel cells (SOFCs). The first task is to develop mixed ionic and electronic conducting doped (Pr,Nd)NiO 4 (PNNO)-based cathodes. This task is built on a prior collaborative work with LG Fuel Cell System, which showed that doped PNNO could exhibit phase stability at high temperatures. The initial focus will be on investigating the durability and endurance of its electrochemical performance and the temporal evolution of microstructures. In-situ high temperature neutron diffraction and x-ray diffraction will be used to study the structures of these phase stable compounds. PNNO doped with Ca and transition metal elements will be synthesized. Physical properties of these materials with respect to coefficient of thermal expansion, electrical conductivity, diffusion coefficient, and nonstoichiometry will be measured. The benefits of dense versus porous barriers will be studied and the role of barrier layer will be identified and a guideline will be provided to choose the maximum porosity for durable and robust cathode performance with co-doped PNNO as the cathodes. LSCF6428 will be used to compare its power density with that of co-doped PNNO in the absence of Cr, but some studies comparing Cr tolerance will be performed towards the end of the project. The conditions at which preferred nickelate phases are stable will be defined, including sintering temperature, operating temperature, and composition range. The second task will focus on the investigation of the location of degradation by using differential relaxation time (DRT) analysis, coupled with least squares fitting and systematical post analyses. DRT analysis can provide (1) a direct access to the kinetic parameters of the underlying processes in both cathode and anode, and (2) a clearer picture of SOFC operation, which allows loss factors to the changes of microstructures or activities of either electrode to be distinguished, and a better target fuel cell development to be enabled. The third task aims at applying the accelerated testing protocol to investigate the microstructural evolution of the cathode candidates identified in this research. Technical approaches will be developed to mitigate and improve the durability of cathode materials by choosing the right chemistry and tuning cathode microstructures.

36 MATERIALS SCIENCE↗

Synthesis, structure and electrochemical properties of polyaniline/MoO{sub 3} nanobelt composite for lithium battery

Graphical abstract: Hydrothermal method was introduced for the synthesis of MoO{sub 3} nanobelts and polyaniline (PANI)/MoO{sub 3} nanobelt composites. The structure and morphology of the samples were studied by X-ray diffraction (XRD), Fourier transform infrared radiation (FTIR), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analysis. We can see the presence of polyaniline on the MoO{sub 3} nanobelts surface in the TEM pictures as shown in Fig. (a). The pure MoO{sub 3} nanobelts exhibit the initial specific capacity 276 mAhg{sup −1}, whereas PANI/MoO{sub 3} nanobelt composite shows little low initially 228 mAhg{sup −1} after that it has more stabilized specific capacity with increasing cycle numbers as shown in Fig. (b). The cyclic voltammograms of the PANI/MoO{sub 3} nanobelt composite show better cyclic performance compared to pure MoO{sub 3} nanobelts. The electrochemical impedance spectres were studied for both the pure and PANI/MoO{sub 3} samples at 2.0 and 3.5 potentials. The role of the PANI polymeric component of the composite material seems to be the stabilization of the specific capacity due to probable homogeneous distribution of the induced stress during cycling. Display Omitted Highlights: ► Hydrothermal synthesis of MoO{sub 3}, PANI/MoO{sub 3} nanobelts. ► Samples were characterised by XRD, FTIR, DSC, SEM, TEM, CV and impedance. ► MoO{sub 3} nanobelts cathode battery shows initial specific capacity 276 mAhg{sup −1}. ► PANI/MoO{sub 3} nanobelts show initial specific capacity 228 mAhg{sup −1} but high stability. ► PANI/MoO{sub 3} sample studies by impedance at the potentials of 2.0 and 3.5 V. -- Abstract: The MoO{sub 3} nanobelts and polyaniline (PANI)/MoO{sub 3} nanobelt composite were synthesized using hydrothermal method. The crystal structure and morphology of the samples were studied by X-ray diffraction (XRD), Fourier transform infrared radiation (FTIR), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Differential scanning calorimetric (DSC) and thermo gravimetric (TG) measurements were carried out for PANI/MoO{sub 3} nanobelt composite. The pure MoO{sub 3} nanobelts exhibit the initial specific capacity 276 mAhg{sup −1}, whereas PANI/MoO{sub 3} nanobelt composite showed little low initially 228 mAhg{sup −1} after that it has more stabilized specific capacity with increasing cycle numbers at constant current density of 30.7 mAg{sup −1} in the potential range 1.0–4.0 V vs. Li/Li{sup +}. The electrochemical impedance profiles were also studied. The cyclic voltammograms of the PANI/MoO{sub 3} nanobelt composite showed better cyclic performance as compared with pure MoO{sub 3} nanobelts, this is due to the role of PANI polymeric component stabilization of the specific capacity by homogeneous distribution within nanobelts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, Structure, and Electrochemical Performance of High Capacity Li 2 Cu 0.5 Ni 0.5 O 2 Cathodes

Orthorhombic Li 2 NiO 2 , Li 2 CuO 2 , and solid solutions thereof have been studied as potential cathode materials for lithium-ion batteries due to their high theoretical capacity and relatively low cost. While neither endmember shows good cycling stability, the intermediate composition, Li 2 Cu 0.5 Ni 0.5 O 2 , yields reasonably high reversible capacities. A new synthetic approach and detailed characterization of this phase and the parent Li 2 CuO 2 are presented. The cycle life of Li 2 Cu 0.5 Ni 0.5 O 2 is shown to depend critically on the voltage window. The formation of Cu 1+ at low voltage and oxygen evolution at high voltage limit the electrochemical reversibility. In situ X-ray absorption spectroscopy (XAS), in situ Raman spectroscopy, and gas evolution measurements are used to follow the chemical and structural changes that occur as a function of cell voltage.

25 ENERGY STORAGE↗

Role of Surface Chemistry on Catalyst/Ionomer Interactions for Transition Metal–Nitrogen–Carbon Electrocatalysts

The role of the interaction between doped carbon-based materials and ionic conductors is essential in multiple technologies, from fuel cells and energy storage devices to conductive polymer composites. In this paper, we report how the surface chemistry of transition metal–nitrogen–carbon (MNC) electrocatalysts affects catalyst–ionomer interaction and the resulting structure of cathodes. The cathode structure resulting from these interactions is directly related to the performance in membrane electrode assembly (MEA) fuel cells. To advance the development of platinum group metal (PGM)-free electrodes for the oxygen reduction reaction it is necessary to understand the structure of the catalyst layers with focus on chemistry and distribution of active sites and ionomer morphology. To assess catalyst interaction with an ionomer, X-ray photoelectron spectroscopy is applied to study the chemistry of catalyst layers while density functional theory (DFT) is used to calculate adsorption energies of the ionomer side chain on different nitrogen species. We report that a high surface concentration of hydrogenated nitrogen at the surface of MNC catalysts causes inefficient ionomer morphology, while an abundance of surface oxides promotes both an efficient distribution of active sites and an optimal ionomer–catalyst interface. The critical role of protonation of nitrogen within catalytic layers in inhibiting proton transport during fuel cell operation is also suggested. As a result, this is the first report of the effect the surface chemistry of MNC catalysts, in the presence of the ionomer, has on the structure and performance of MEA electrodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multiprincipal Component P2-Na 0.6 (Ti 0.2 Mn 0.2 Co 0.2 Ni 0.2 Ru 0.2 )O 2 as a High-Rate Cathode for Sodium-Ion Batteries

Mixing transition metal cations in nearly equiatomic proportions in layered oxide cathode materials is a new strategy for improving the performances of Na-ion batteries. The mixing of cations not only offers entropic stabilization of the crystal structure but also benefits the diffusion of Na ions with tuned diffusion activation energy barriers. In light of this strategy, a high-rate Na 0.6 (Ti 0.2 Mn 0.2 Co 0.2 Ni 0.2 Ru 0.2 )O 2 cathode was designed, synthesized, and investigated, combining graph-based deep learning calculations and complementary experimental characterizations. This new cathode material delivers high discharge capacities of 164 mA g –1 at 0.1 C and 68 mAh g –1 at a very high rate of 86 C, demonstrating an outstanding high rate capability. Ex situ and operando synchrotron X-ray diffraction were used to reveal the detailed structural evolution of the cathode upon cycling. Using the climbing-image nudged elastic-band calculation and Ab initio molecular dynamics simulations, we show that the optimal transition metal composition enables a percolating network of low barrier pathways for fast, macroscopic Na diffusion, resulting in the observed high rate performance.

25 ENERGY STORAGE↗

All-solid-state proton battery using gel polymer electrolyte

A proton conducting gel polymer electrolyte system; PMMA+NH{sub 4}SCN+EC/PC, has been prepared. The highest ionic conductivity obtained from the system is 2.5 × 10−4 S cm{sup −1}. The optimized composition of the gel electrolyte has been used to fabricate a proton battery with Zn/ZnSO{sub 4}⋅7H{sub 2}O anode and MnO{sub 2} cathode. The open circuit voltage of the battery is 1.4 V and the highest energy density is 5.7 W h kg−1 for low current drain.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cost-effective Manufacturing and Morphological Stabilization of Nanostructured Cathodes for Commercial SOFCs

The overall goals of the program were to develop methods for preparing and stabilizing SOFC electrodes by infiltration that can be manufactured on a practical scale, then transfer those methods to cells in stacks. Cathodes prepared by infiltration of nanoparticles into a porous scaffold of the electrolyte have demonstrated outstanding electrochemical performance and mechanical strength but are difficult to manufacture due to the large number of infiltration steps required to produce a conductive composite and show poor stability due to sintering of the nanoparticles. At Penn, the main goal was to develop a fabrication method that uses only a small number of infiltration steps. Infiltration with molten salts and electrodeposition were pursued but deemed impractical. A method in which an electronically conductive scaffold consisted of a composite of a mixed conductor, LSF (La 0.9 Sr 0.1 FeO 3 ), with yttria-stabilized zirconia (YSZ) was found to be promising. While some cation mixing between LSF and YSZ was observed during calcination, there was no evidence for new phases in XRD and incorporation of Zr into the perovskite could be minimized by reducing the Sr content of the LSF. To stabilize nanoparticles infiltrated into the LSF-YSZ composite scaffold, the USC team examined the effects of Atomic Layer Deposition with ZrO 2 and infiltrated nanoparticles. Significantly enhanced stability was observed with the infiltrated nanoparticles. The FuelCell Energy team prepared 4”x4” cells in which an LSF-YSZ composite scaffold was cofired with the YSZ electrolyte and infiltrated with LSCF nanoparticles. Apparently because the LSF-YSZ scaffold layer was very thin in this case, the cation mixing that occurred during calcination resulted in a poor scaffold-electrolyte interface which caused reduced performance.

36 MATERIALS SCIENCE↗

Self-assembly of photo-reduced graphene-titania films.

In an aim to develop photo-responsive composites, the UV photo-reduction of aqueous titanium oxide nanoparticle-graphene oxide (TiO{sub 2}-GO) dispersions (Lambert et al. J Phys. Chem. 2010 113 (46), 19812-19823) was undertaken. Photo-reduction led to the formation of a black precipitate as well as a soluble portion, comprised of titanium oxide nanoparticle-reduced graphene oxide (TiO{sub 2}-RGO). When allowed to slowly evaporate, self assembled titanium oxide nanoparticle-graphene oxide (SA-TiO{sub 2}-RGO) films formed at the air-liquid interface of the solution. The thickness of SARGO-TiO{sub 2} films range from {approx}30-100 nm when deposited on substrates, and appear to be comprised of a mosaic assembly of graphene nanosheets and TiO{sub 2}, as observed by scanning electron microscopy. Raman spectroscopy and X-ray photoelectron spectroscopy indicate that the graphene oxide is only partially reduced in the SA-TiO{sub 2}-RGO material. These films were also deposited onto inter-digitated electrodes and their photo-responsive behavior was examined. UV-exposure lead to a {approx} 200 kOhm decrease in resistance across the device, resulting in a cathodically biased film. The cathodic bias of the films was utilized for the subsequent reduction of Ag(NO{sub 3}) into silver (Ag) nanoparticles, forming a ternary Ag-(SA-RGO-TiO{sub 2}) composite. Various aspects of the self assembled films, their photoconductive properties as well as potential applications will be presented.

36 MATERIALS SCIENCE↗

Li 2 S nano spheres anchored to single-layered graphene as a high-performance cathode material for lithium/sulfur cells

Fully lithiated lithium sulfide (Li 2 S) is a promising cathode material for Li/S cells due to its high theoretic capacity (1166 mA h g -1 ) and specific energy (2600 W h kg -1 ). However, low utilization of sulfur and poor rate capability still hinder the practical application of Li/S cells. In this paper, a carbon coated Li 2 S/graphene composite (Li 2 S/G@C) was developed by incorporating Li 2 S nano spheres with single-layered graphene and further forming a durable protective carbon layer on the surface of the Li 2 S particles using a facile CVD method. The high rate capability and remarkable cycle life of the Li 2 S/G@C cathode were demonstrated, which was mainly attributed to the unique structure of the Li 2 S/G@C that can significantly improve not only the electrical conductivity, but also the mechanical stability of the sulfur cathode.

25 ENERGY STORAGE↗

Encapsulation of LiFePO{sub 4} by in-situ graphitized carbon cage towards enhanced low temperature performance as cathode materials for lithium ion batteries

The severe capacity decay of LiFePO{sub 4} at low temperatures (≤0 °C) limits its wide applications as cathode materials for energy storage batteries. Creating comprehensive carbon network between particles with improved electronic conductivity is a well known solution to this problem. Here, a novel structured LiFePO{sub 4}/C composite was prepared by a facile solid state route, in which nanosized LiFePO{sub 4} spheres were encapsulated by in-situ graphitized carbon cages. With the enhancement in electronic conductivity (2.15e−1 S cm{sup −1}), the composite presented excellent rate performance at room temperature and remarkable capacity retention at −40 °C, with charge transfer resistance much lower than commercial LiFePO{sub 4}. - Graphical abstract: A novel structured LiFePO{sub 4/}C composite was prepared by a facile solid state route, in which nanosized LiFePO{sub 4} spheres were encapsulated by in-situ graphitized carbon cages. - Highlights: • Several nano-sized LiFePO{sub 4} particles are encapsulated in carbon cage. • Carbon is in-situ graphitized with enhanced electronic conductivity. • The as prepared LiFePO{sub 4} exhibits notable capacity retention at −40 °C. • R{sub ct} is lowered by a factor of ∼10 compared with commercial LiFePO{sub 4}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Self-regulating surface chemistry for more robust highly durable solid oxide fuel cell cathodes

In this project we explored the possibility of mitigating silicon poisoning of Pr doped ceria (PCO) electrodes for oxygen reduction in SOFC. The approach was to dope PCO with various amount of lanthanum and study the new compositions in terms of their mixed conduction properties, their oxygen surface exchange kinetics, as well as their resistance to silicon poisoning. The effects of lanthanum doping on the transport properties and oxygen exchange kinetics of La x (Ce 0.9 Pr 0.1 ) 1-x O 2-δ (x=0, 0.1 and 0.2) have been investigated by electrical conductivity on bulk samples and optical relaxation on thin films respectively. Lanthanum substitution was observed to increase the magnitude of ionic conductivity to values comparable to that of single substituted La x Ce 1-x O 2-δ , with a maximum for a La content of x = 0.1, reaching σ = 9.5×10 -3 S·cm -1 at 600 °C and a decrease in activation energy from ≈ 1 eV for Ce 0.9 Pr 0.1 O 2-δ down to ≈ 0.75 eV for the lanthanum substituted compositions. At the same time, a significant electronic contribution to the total conductivity, estimated to be on the order of 10%, supports significant mixed ionic-electronic conductivity.

08 HYDROGEN↗

Quantifying Reaction and Rate Heterogeneity in Battery Electrodes in 3D through Operando X-ray Diffraction Computed Tomography

In composite battery electrode architectures, local limitations in ionic and electronic transport can result in nonuniform energy storage reactions. Understanding such reaction heterogeneity is important to optimizing battery performance, including rate capability and mitigating degradation and failure. Here, we use spatially resolved X-ray diffraction computed tomography to map the reaction in a composite electrode based on the LiFePO 4 active material as it undergoes charge and discharge. Accelerated reactions at the electrode faces in contact with either the separator or the current collector demonstrate that both ionic and electronic transport limit the reaction progress. The data quantify how nonuniformity of the electrode reaction leads to variability in the charge/discharge rate, both as a function of time and position within the electrode architecture. Importantly, this local variation in the reaction rate means that the maximum rate that individual cathode particles experience can be substantially higher than the average, control charge/discharge rate, by a factor of at least 2-5 times. As a result, this rate heterogeneity may accelerate rate-dependent degradation pathways in regions of the composite electrode experiencing faster-than-average reaction and has important implications for understanding and optimizing rate-dependent battery performance. Benchmarking multiscale continuum model parameters against the observed reaction heterogeneity permits extension of these models to other electrode geometries.

25 ENERGY STORAGE↗