Search NASA⌕ Search

SEARCH · Search NASA

Results for “delta method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

The Transition Density Formalism in the First Compton Computation on $^4$He

The method and results of the first theory description of 4He Compton scattering at nuclear energies is presented, with a focus on figures. It uses the same Compton kernels familiar from proton, deuteron and 3He Compton scattering in Chiral Effective Field Theory with explicit Delta degrees of freedom, applicable between about 50 and 130MeV. The result compares well to data from HIγS, MAXlab and Illinois. The sensitivity of the cross section on the (static) scalar-isoscalar polarisabilities of the nucleon is explored. The project is part of the synergetic international effort of experimentalists and theorists in Compton scattering on one- and few-nucleon systems.

Griesshammer, Harald [The George Washington Univer↗

Treatment of conical and nonconical supersonic flows by an implicit marching scheme applied to the full potential equation

An aerodynamic prediction technique based on the full potential equation in conservation form is developed for the treatment of supersonic flows. This technique bridges the gap between simplistic linear theory methods and complex Euler solvers. A novel local density linearization concept and a second order accurate retarded density scheme, both producing the correct artificial viscosity, are introduced in developing an implicit marching scheme for solving the scalar potential. Results for conical flows over delta wings and a wing-body combination and for non-conical flows over bodies of revolution at angles of attack are compared with Euler and nonconservative full potential calculations and experimental data. The present formulation requires an order of magnitude less computer time and significantly less computer memory over Euler codes and exhibits a considerable improvement in computational efficiency and generality over an existing nonconservative full potential code.

Shankar, V.↗

Manned Mars mission transfer from Mars parking orbit to Phobos or Deimos

This paper addresses the problem of orbit transfers from a Mars parking orbit with an inclination of 165 degrees to the Mars moons. The transfer can be accomplished using a three impulse transfer. The current 1999 baseline manned Mars mission requires a Mars parking orbit with an inclination of 165 degrees. This orbit inclination is necessary due to the direction of the Mars arrival and departure asymptotes of the interplanetary trajectory. The selection of this inclination for the parking orbit minimized the delta velocity requirements at Mars arrival and departure. This presents a problem In making transfers from this orbit to either Phobos or Deimos since it is a retrograde orbit. It is possible to make this transfer efficiently using a three impulse transfer and an intermediate transfer orbit with a very large apogee altitude. This paper will show how the intermediate transfer orbit apogee can be determined based on a preselected transfer time, the delta velocities required as a function of transfer time, and the propellant required as a function of mission module weight for a transfer time of 5 days. The data presented in this paper Is specifically for the 1999 opposition class mission but the methods outlined are applicable to any other mission which requires a high inclination parking orbit.

Jack Mulqueen↗

Research in computational fluid dynamics

The numerical integration of quasi-one-dimensional unsteady flow problems which involve finite rate chemistry are discussed, and are expressed in terms of conservative form Euler and species conservation equations. Hypersonic viscous calculations for delta wing geometries is also examined. The conical Navier-Stokes equations model was selected in order to investigate the effects of viscous-inviscid interations. The more complete three-dimensional model is beyond the available computing resources. The flux vector splitting method with van Leer's MUSCL differencing is being used. Preliminary results were computed for several conditions.

Murman, Earll M.↗

Sonic boom predictions for three generic models using a solution-adaptive full-potential code

The TranAir full-potential code, which utilizes a solution-adaptive, unstructured Cartesian grid, was used to compute near-field pressure signatures of three generic supersonic configurations: a cone-cylinder, a low aspect ratio rectangular wing, and a delta-wing/body. TranAir pressure signatures are extrapolated to near- and mid-field distances using a quasi-linear extrapolation technique. Results are compared with existing wind tunnel data and, where possible, with extrapolated experimental data and quasi-linear Whitham-method results. In general, the extrapolated TranAir data is in good agreement with experimental and Whitham-method pressure signatures, but peak pressures are slightly under-predicted. It is thought that computed data obtained too near to the model was the main reason for the discrepancies. Flow-field grid structure was also found to be important in obtaining accurate offbody data.

Madson, Michael D.↗

Formation of a metastable ferromagnetic tau phase during containerless melt processing in Mn-Al-C alloys

This paper reports the production of a metastable ferromagnetic tau phase directly from the melt in Mn(0.55)Al(0.433)C(0.017), using a containerless processing method involving levitation melting followed by quenching. Using the results from differential thermal analysis measurements and an analysis of the phase equilibria, it was found that the minimum amount of undercooling level required for ferromagnetic metastable tau phase formation in this alloy was Delta T = 87 K. The attainment of this undercooling may be facilitated by the application of containerless melt processing.

Kim, Y. J.↗

The Delta x B = 0 Constraint Versus Minimization of Numerical Errors in MHD Simulations

The MHD equations are a system of non-strictly hyperbolic conservation laws. The non-convexity of the inviscid flux vector resulted in corresponding Jacobian matrices with undesirable properties. It has previously been shown by Powell et al. (1995) that an 'almost' equivalent MHD system in non-conservative form can be derived. This non-conservative system has a better conditioned eigensystem. Aside from Powell et al., the MHD equations can be derived from basic principles in either conservative or non-conservative form. The Delta x B = 0 constraint of the MHD equations is only an initial condition constraint, it is very different from the incompressible Navier-Stokes equations in which the divergence condition is needed to close the system (i.e., to have the same number of equations and the same number of unknown). In the MHD formulations, if Delta x B = 0 initially, all one needs is to construct appropriate numerical schemes that preserve this constraint at later time evolutions. In other words, one does not need the Delta x B condition to close the MHD system. We formulate our new scheme together with the Cargo & Gallice (1997) form of the MHD approximate Riemann solver in curvilinear grids for both versions of the MHD equations. A novel feature of our new method is that the well-conditioned eigen-decomposition of the non-conservative MHD equations is used to solve the conservative equations. This new feature of the method provides well-conditioned eigenvectors for the conservative formulation, so that correct wave speeds for discontinuities are assured. The justification for using the non-conservative eigen-decomposition to solve the conservative equations is that our scheme has a better control of the numerical error associated with the divergence of the magnetic condition. Consequently, computing both forms of the equations with the same eigen-decomposition is almost equivalent. It will be shown that this approach, using the non-conservative eigensystem when solving the conservative equations, also works well in the context of standard shock-capturing schemes.

Yee, H. C.↗

Gamma-ray timing of redback PSR J2339–0533: Hints for gravitational quadrupole moment changes

We present the results of precision gamma-ray timing measurements of the binary millisecond pulsar PSR J2339–0533, an irradiating system of the “redback” type, using data from the Fermi Large Area Telescope. We describe an optimized analysis method to determine a long-term phase-coherent timing solution spanning more than six years, including a measured eccentricity of the binary orbit and constraints on the proper motion of the system. A major result of this timing analysis is the discovery of an extreme variation of the nominal 4.6 hr orbital period P{sub orb} over time, showing alternating epochs of decrease and increase. We inferred a cyclic modulation of P{sub orb} with an approximate cycle duration of 4.2 yr and a modulation amplitude of ΔP{sub orb}/P{sub orb}=2.3×10{sup −7}. Considering different possible physical causes, the observed orbital-period modulation most likely results from a variable gravitational quadrupole moment of the companion star due to cyclic magnetic activity in its convective zone.

79 ASTRONOMY AND ASTROPHYSICS↗

CFD flowfield simulation of Delta Launch Vehicles in a power-on configuration

This paper summarizes recent work at McDonnell Douglas Aerospace (MDA) to develop and validate computational fluid dynamic (CFD) simulations of under expanded rocket plume external flowfields for multibody expendable launch vehicles (ELVs). Multi engine reacting gas flowfield predictions of ELV base pressures are needed to define vehicle base drag and base heating rates for sizing external nozzle and base region insulation thicknesses. Previous ELV design programs used expensive multibody power-on wind tunnel tests that employed chamber/nozzle injected high pressure cold or hot-air. Base heating and pressure measurements were belatedly made during the first flights of past ELV's to correct estimates from semi-empirical engineering models or scale model tests. Presently, CFD methods for use in ELV design are being jointly developed at the Space Transportation Division (MDA-STD) and New Aircraft Missiles Division (MDA-NAMD). An explicit three dimensional, zonal, finite-volume, full Navier-Stokes (FNS) solver with finite rate hydrocarbon/air and aluminum combustion kinetics was developed to accurately compute ELV power-on flowfields. Mississippi State University's GENIE++ general purpose interactive grid generation code was chosen to create zonal, finite volume viscous grids. Axisymmetric, time dependent, turbulent CFD simulations of a Delta DSV-2A vehicle with a MB-3 liquid main engine burning RJ-1/LOX were first completed. Hydrocarbon chemical kinetics and a k-epsilon turbulence model were employed and predictions were validated with flight measurements of base pressure and temperature. Zonal internal/external grids were created for a Delta DSV-2C vehicle with a MB-3 and three Castor-1 solid motors burning and a Delta-2 with an RS-27 main engine (LOX/RP-1) and 9 GEM's attached/6 burning. Cold air, time dependent FNS calculations were performed for DSV-2C during 1992. Single phase simulations that employ finite rate hydrocarbon and aluminum (solid fuel) combustion chemistry are currently in progress. Reliable and efficient Eulerian algorithms are needed to model two phase (solid-gas) momentum and energy transfer mechanisms for solid motor fuel combustion products.

Pavish, D. L.↗

THE ACS LCID PROJECT. II. FAINT VARIABLE STARS IN THE ISOLATED DWARF IRREGULAR GALAXY IC 1613

We present the results of a new search for variable stars in the Local Group (LG) isolated dwarf galaxy IC 1613, based on 24 orbits of F475W and F814W photometry from the Advanced Camera for Surveys (ACS) on board the Hubble Space Telescope. We detected 259 candidate variables in this field, of which only 13 (all of them bright Cepheids) were previously known. Out of the confirmed variables, we found 90 RR Lyrae stars, 49 classical Cepheids (including 36 new discoveries), and 38 eclipsing binary stars for which we could determine a period. The RR Lyrae include 61 fundamental (RRab) and 24 first-overtone (FO, RRc) pulsators, and five pulsating in both modes simultaneously (RRd). As for the majority of LG dwarfs, the mean periods of the RRab and RRc (0.611 and 0.334 days, respectively) as well as the fraction of overtone pulsators (f{sub c} = 0.28) place this galaxy in the intermediate regime between the Oosterhoff types. From their position on the period-luminosity diagram and light-curve morphology, we can unambiguously classify 25 and 14 Cepheids as fundamental and FO mode pulsators, respectively. Another two are clearly second-overtone Cepheids, the first ones to be discovered beyond the Magellanic Clouds. Among the remaining candidate variables, five were classified as delta-Scuti and five as long-period variables. Most of the others are located on the main sequence, the majority of them likely eclipsing binary systems, although some present variations similar to pulsating stars. We estimate the distance to IC 1613 using various methods based on the photometric and pulsational properties of the Cepheids and RR Lyrae stars. The values we find are in very good agreement with each other and with previous estimates based on independent methods. When corrected to a common reddening of E(B - V) = 0.025 and true Large Magellanic Cloud (LMC) distance modulus of (m-M){sub LMC,0} = 18.515 +- 0.085, we find that all the distance determinations from the literature converge to a common value of (m-M){sub 0} = 24.400 +- 0.014 (statistical) or 760 kpc. The parallel WFPC2 field, which lies within three core radii, was also searched for variable stars. We discovered nine RR Lyrae stars (four RRab, four RRc, and one RRd) and two Cepheids, even though the lower signal-to-noise ratio of the observations did not allow us to measure their periods as accurately as for the variables in the ACS field of view. We provide their coordinates and approximate properties for completeness.

79 ASTRONOMY AND ASTROPHYSICS↗

KEPLER OBSERVATIONS OF RAPID OPTICAL VARIABILITY IN THE BL LACERTAE OBJECT W2R1926+42

We present the first Kepler monitoring of a strongly variable BL Lac, W2R1926+42. The light curve covers 181 days with {approx}0.2% errors, 30 minute sampling and >90% duty cycle, showing numerous {delta}I/I > 25% flares over timescales as short as a day. The flux distribution is highly skewed and non-Gaussian. The variability shows a strong rms-flux correlation with the clearest evidence to date for nonlinearity in this relation. We introduce a method to measure periodograms from the discrete autocorrelation function, an approach that may be well-suited to a wide range of Kepler data. The periodogram is not consistent with a simple power-law, but shows a flattening at frequencies below 7 Multiplication-Sign 10{sup -5} Hz. Simple models of the power spectrum, such as a broken power law, do not produce acceptable fits, indicating that the Kepler blazar light curve requires more sophisticated mathematical and physical descriptions than currently in use.

79 ASTRONOMY AND ASTROPHYSICS↗

Baryon transition form factors at the pole

Electromagnetic resonance properties are uniquely defined at the pole and do not depend on the separation of the resonance from background or the decay channel. Photon-nucleon branching ratios are nowadays often quoted at the pole, and we generalize the considerations to the case of virtual photons. In this paper, we derive and compare relations for nucleon to baryon transition form factors both for the Breit-Wigner and the pole positions. Using the MAID2007 and SAID SM08 partial wave analyses of pion electroproduction data, we compare the $G_M$, $G_E$, and $G_C$ form factors for the $\Delta(1232)$ resonance excitation at the Breit-Wigner resonance and pole positions up to $Q^2=5$ GeV$^2$. We also explore the $E/M$ and $S/M$ ratios as functions of $Q^2$. Finally, for pole and residue extraction, we apply the Laurent + Pietarinen method.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The response of an RC line MWPC to primary cosmic rays

A simple 50 x 50 sq cm MWPC plane was arranged as an RC-line and flown on a balloon flight with the MSFC-UAH Cosmic Ray experiment. Positions of primary cosmic ray tracks in the RC-line were determined by the risetime method and compared with the expected position as indicated by a best line fitted through four planes of the conventional MWPC hodoscope. Mean errors were estimated for sea-level muons, and CNO group and iron group particles. It is believed that the delta-rays accompanying the primaries degraded the position resolution. Measured standard deviations allowing for uncertainty in the true track position are of the order of 1 cm or less in the primary charge region between 7 and 26.

Gregory, J. C.↗

Thermal-mechanical fatigue crack growth in Inconel X-750

Thermal-mechanical fatigue crack growth (TMFCG) was studied in a gamma-gamma' nickel base superalloy Inconel X-750 under controlled load amplitude in the temperature range from 300 to 650 C. In-phase (T sub max at sigma sub max), out-of-phase (T sub min at sigma sub max), and isothermal tests at 650 C were performed on single-edge notch bars under fully reversed cyclic conditions. A dc electrical potential method was used to measure crack length. The electrical potential response obtained for each cycle of a given wave form and R value yields information on crack closure and crack extension per cycle. The macroscopic crack growth rates are reported as a function of delta k and the relative magnitude of the TMFCG are discussed in the light of the potential drop information and of the fractographic observations.

Marchand, N.↗

Thermal-mechanical fatigue crack growth in Inconel X-750

Thermal-mechanical fatigue crack growth (TMFCG) was studied in a 'gamma-gamma' nickel base superalloy Inconel X-750 under controlled load amplitude in the temperature range from 300 to 650 C. In-phase (T sub max at sigma sub max), out-of-phase (T sub min at sigma sub max), and isothermal tests at 650 C were performed on single-edge notch bars under fully reversed cyclic conditions. A dc electrical potential method was used to measure crack length. The electrical potential response obtained for each cycle of a given wave form and R value yields information on crack closure and crack extension per cycle. The macroscopic crack growth rates are reported as a function of delta k and the relative magnitude of the TMFCG are discussed in the light of the potential drop information and of the fractographic observations.

Marchand, N.↗

Applications of Euler equations to sharp edge delta wings with leading edge vortices

Studies on the solution of discrete Euler equations past swept delta wing configurations with sharp leding edges are presented. Freestream Mach numbers range from zero to supersonic, although the Mach number normal to the leading edge is subsonic for all cases discussed. A few examples are given to show the application of the numerical methods to representative problems. The major dicussion is directed at the application of Computational Fluid Dynamics to the understanding of the fundamental fluid mechanic mechanisms of this class of flows.

Murman, Earll M.↗

Monitoring small-crack growth by the replication method

The suitability of the acetate replication method for monitoring the growth of small cracks is discussed. Applications of this technique are shown for cracks growing at the notch root in semicircular-edge-notch specimens of a variety of aluminum alloys and one steel. The calculated crack growth rate versus Delta K relationship for small cracks was compared to that for large cracks obtained from middle-crack-tension specimens. The primary advantage of this techinque is that it provides an opportunity, at the completion of the test, to go backward in time towards the crack initiation event and 'zoom in' on areas of interest on the specimen surface with a resolution of about 0.1 micron. The primary disadvantage is the inability to automate the process. Also, for some materials, the replication process may alter the crack-tip chemistry or plastic zone, thereby affecting crack growth rates.

Swain, Mary H.↗

The proper combination of lift loadings for least drag on a supersonic wing

Lagrange's method of undetermined multipliers is applied to the problem of properly combining lift loadings for the least drag at a given lift on supersonic wings. The method shows the interference drag between the optimum loading and any loading at the same lift coefficient to be constant. This is an integral form of the criterion established by Robert T. Jones for optimum loadings. The best combination of four loadings on a delta wing with subsonic leading edges is calculated as a numerical example. The loadings considered have finite pressures everywhere on the plan form. Through the sweepback range the optimum combination of the four nonsingular loadings has about the same drag coefficient as a flat plate with leading-edge thrust.

Grant, Frederick C↗