Search NASA⌕ Search

SEARCH · Search NASA

Results for “dynamic diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Element-specific ultrafast lattice dynamics in FePt nanoparticles

Light–matter interaction at the nanoscale in magnetic alloys and heterostructures is a topic of intense research in view of potential applications in high-density magnetic recording. While the element-specific dynamics of electron spins is directly accessible to resonant x-ray pulses with femtosecond time structure, the possible element-specific atomic motion remains largely unexplored. We use ultrafast electron diffraction (UED) to probe the temporal evolution of lattice Bragg peaks of FePt nanoparticles embedded in a carbon matrix following excitation by an optical femtosecond laser pulse. The diffraction interference between Fe and Pt sublattices enables us to demonstrate that the Fe mean square vibration amplitudes are significantly larger that those of Pt as expected from their different atomic mass. Both are found to increase as energy is transferred from the laser-excited electrons to the lattice. Contrary to this intuitive behavior, we observe a laser-induced lattice expansion that is larger for Pt than for Fe atoms during the first picosecond after laser excitation. This effect points to the strain-wave driven lattice expansion with the longitudinal acoustic Pt motion dominating that of Fe.

36 MATERIALS SCIENCE↗
DOE OSTI2021

FMX – the Frontier Microfocusing Macromolecular Crystallography Beamline at the National Synchrotron Light Source II

Two new macromolecular crystallography (MX) beamlines at the National Synchrotron Light Source II, FMX and AMX, opened for general user operation in February 2017 [Schneider et al. (2013). J. Phys. Conf. Ser. 425 , 012003; Fuchs et al. (2014). J. Phys. Conf. Ser. 493 , 012021; Fuchs et al. (2016). AIP Conf. Proc. SRI2015 , 1741 , 030006]. FMX, the micro-focusing Frontier MX beamline in sector 17-ID-2 at NSLS-II, covers a 5–30 keV photon energy range and delivers a flux of 4.0 × 10 12 photons s −1 at 1 Å into a 1 µm × 1.5 µm to 10 µm × 10 µm (V × H) variable focus, expected to reach 5 × 10 12 photons s −1 at final storage-ring current. This flux density surpasses most MX beamlines by nearly two orders of magnitude. The high brightness and microbeam capability of FMX are focused on solving difficult crystallographic challenges. The beamline's flexible design supports a wide range of structure determination methods – serial crystallography on micrometre-sized crystals, raster optimization of diffraction from inhomogeneous crystals, high-resolution data collection from large-unit-cell crystals, room-temperature data collection for crystals that are difficult to freeze and for studying conformational dynamics, and fully automated data collection for sample-screening and ligand-binding studies. FMX's high dose rate reduces data collection times for applications like serial crystallography to minutes rather than hours. With associated sample lifetimes as short as a few milliseconds, new rapid sample-delivery methods have been implemented, such as an ultra-high-speed high-precision piezo scanner goniometer [Gao et al. (2018). J. Synchrotron Rad. 25 , 1362–1370], new microcrystal-optimized micromesh well sample holders [Guo et al. (2018). IUCrJ , 5 , 238–246] and highly viscous media injectors [Weierstall et al. (2014). Nat. Commun. 5 , 3309]. The new beamline pushes the frontier of synchrotron crystallography and enables users to determine structures from difficult-to-crystallize targets like membrane proteins, using previously intractable crystals of a few micrometres in size, and to obtain quality structures from irregular larger crystals.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Machine-learning-assisted analysis of transition metal dichalcogenide thin-film growth

In situ reflective high-energy electron diffraction (RHEED) is widely used to monitor the surface crystalline state during thin-film growth by molecular beam epitaxy (MBE) and pulsed laser deposition. With the recent development of machine learning (ML), ML-assisted analysis of RHEED videos aids in interpreting the complete RHEED data of oxide thin films. The quantitative analysis of RHEED data allows us to characterize and categorize the growth modes step by step, and extract hidden knowledge of the epitaxial film growth process. In this study, we employed the ML-assisted RHEED analysis method to investigate the growth of 2D thin films of transition metal dichalcogenides (ReSe2) on graphene substrates by MBE. Principal component analysis (PCA) and K-means clustering were used to separate statistically important patterns and visualize the trend of pattern evolution without any notable loss of information. Using the modified PCA, we could monitor the diffraction intensity of solely the ReSe2 layers by filtering out the substrate contribution. These findings demonstrate that ML analysis can be successfully employed to examine and understand the film-growth dynamics of 2D materials. Further, the ML-based method can pave the way for the development of advanced real-time monitoring and autonomous material synthesis techniques.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Analysis of harmonically seeded Free-Electron Laser

We revisit Free-Electron Laser (FEL) equations in the presence of a planar undulator to investigate effects on longitudinal FEL dynamics upon seeding by a harmonic for both low-gain and high-gain cases. Then, we extend the FEL equations in 3D to include electron beam emittance and radiation diffraction effects.

43 PARTICLE ACCELERATORS↗
NASA NTRS2004

Reducing the Cation Exchange Capacity of Lithium Clay to Form Better Dispersed Polymer-Clay Nanocomposites

Polymer-clay nanocomposites have exhibited superior strength and thermo- oxidative properties as compared to pure polymers for use in air and space craft; however, there has often been difficulty completely dispersing the clay within the matrices of the polymer. In order to improve this process, the cation exchange capacity of lithium clay is first lowered using twenty-four hour heat treatments of no heat, 130 C, 150 C, or 170 C to fixate the lithium ions within the clay layers so that they are unexchangeable. Generally, higher temperatures have generated lower cation exchange capacities. An ion exchange involving dodecylamine, octadecylamine, or dimethyl benzidine (DMBZ) is then employed to actually expand the clay galleries. X-ray diffraction and transmission electron microscopy can be used to determine whether the clay has been successfully exfoliated. Finally, resins of DMBZ with clay are then pressed into disks for characterization using dynamic mechanical analyzer and oven- aging techniques in order to evaluate their glass transition, modulus strength, and thermal-oxidative stability in comparison to neat DMBZ. In the future, they may also be tested as composites for flexural and laminar shear strength.

Liang, Maggie↗
DOE OSTI2025

Applied-field magnetic structure and spectroscopy shifts of the effective spin-$\frac{1}{2}$ 𝑋⁢𝑌-like magnet Li 2 ⁢CoCl 4

Insulators containing chains of magnetic transition metal cations provide platforms for probing spin-$\frac{1}{2}$ dynamics and quantum critical behavior. Li 2 ⁢ CoCl 4 contains edge-sharing CoCl 6 octahedra that form chains along the crystallographic 𝑐 axis and orders antiferromagnetically at zero field, but questions remain about its applied-field magnetic structure and the Co 2+ spin state. Here, in this study, we show with neutron diffraction on a polycrystalline sample how the antialigned chains of cobalt moments begin to transition to a ferromagnetic state above 1.6 T. Further, using magnetic resonance absorption measurements and noninteracting spin models, we reveal the strongly anisotropic nature of the Co 2+ ion's 𝑋⁢𝑌-like magnetic behavior (𝑔 ∥ = 2.77 and 𝑔 ⊥ = 5.23) and its 𝐽 = $\frac{1}{2}$ ground state. We therefore supply the magnetic structures and anisotropic description needed to explore the dynamics of the field-driven magnetic phases, laying the foundation for further experimental and theoretical studies.

Riedel, Zachary W. [Univ. of Illinois at Urbana-Ch↗
DOE OSTI2017

In situ dynamic observations of perovskite crystallisation and microstructure evolution intermediated from [PbI 6 ] 4– cage nanoparticles

Hybrid lead halide perovskites have emerged as high-performance photovoltaic materials with their extraordinary optoelectronic properties. In particular, the remarkable device efficiency is strongly influenced by the perovskite crystallinity and the film morphology. Here, we investigate the perovskites crystallisation kinetics and growth mechanism in real time from liquid precursor continually to the final uniform film. We utilize some advanced in situ characterisation techniques including synchrotron-based grazing incident X-ray diffraction to observe crystal structure and chemical transition of perovskites. The nano-assemble model from perovskite intermediated [PbI 6 ] 4– cage nanoparticles to bulk polycrystals is proposed to understand perovskites formation at a molecular- or nano-level. A crystallisation-depletion mechanism is developed to elucidate the periodic crystallisation and the kinetically trapped morphology at a mesoscopic level. Based on these in situ dynamics studies, the whole process of the perovskites formation and transformation from the molecular to the microstructure over relevant temperature and time scales is successfully demonstrated.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Out-of-equilibrium dynamics of a grid-like Fe( II ) spin crossover dimer triggered by a two-photon excitation

The application of two-photon excitation (TPE) in the study of light-responsive materials holds immense potential due to its deeper penetration and reduced photodamage. Despite these benefits, TPE has been underutilised in the investigation of the photoinduced spin crossover (SCO) phenomenon. Here, we employ TPE to delve into the out-of-equilibrium dynamics of a SCO Fe II dimer of the form [Fe II (HL) 2 ] 2 (BF 4 ) 4 ·2MeCN (HL = 3,5-bis{6-(2,2'-bipyridyl)}pyrazole). Optical transient absorption (OTA) spectroscopy in solution proves that the same dynamics take place under both one-photon excitation (OPE) and TPE. The results show the emergence of the photoinduced high spin state in less than 2 ps and with a lifetime of 147 ns. Time-resolved photocrystallography (TRXRD) reveals a single molecular reorganisation within the first 500 ps following TPE. Additionally, variable temperature single crystal X-ray diffraction (VTSCXRD) and magnetic susceptibility measurements confirm that the thermal transition is silenced by the solvent. While the results of the OTA and TRXRD utilising TPE are intriguing, the high pump fluencies required to excite enough metal centres to the high spin state may impair its practical application. Nonetheless, this study sheds light on the potential of TPE for the investigation of the out-of-equilibrium dynamics of SCO complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Analysis of strain in ion implanted 4H-SiC by fringes observed in synchrotron X-ray topography

A novel high energy implantation system has been successfully developed to fabricate 4H-SiC superjunction devices for medium and high voltage via implantation of dopant atoms with multi-energies ranging from 13 to 66 MeV. The significantly higher levels of energy used compared to conventional implantation processes, necessitates detailed characterization of the lattice damage caused by implantation. To achieve this by employing the novel high energy system, 4H-SiC wafer with 12 μm epilayers were blanket implanted by 13.8–65.7 MeV Al atoms. The lattice damages induced by the implantation were primarily characterized by Synchrotron X-ray Plane Wave Topography (SXPWT) and Reciprocal Space Mapping (RSM). Topographs reveal fringe contrast akin to multiple asymmetric diffraction peaks with an angular separation of only 2″ (arcseconds) observed on rocking curves, indicating inhomogeneous strain distribution across the implanted layer. The strain profile of the implanted layer was extracted from the fringe contrast by applying Rocking-curve Analysis by Dynamical Simulation (RADS). In conclusion, the maximum strain value is similar to that measured on the RSM.

A1. Characterization↗
DOE OSTI2023

High‐Entropy Lithium Argyrodite Solid Electrolytes Enabling Stable All‐Solid‐State Batteries

Abstract Superionic solid electrolytes (SEs) are essential for bulk‐type solid‐state battery (SSB) applications. Multicomponent SEs are recently attracting attention for their favorable charge‐transport properties, however a thorough understanding of how configurational entropy (ΔS conf ) affects ionic conductivity is lacking. Here, we successfully synthesized a series of halogen‐rich lithium argyrodites with the general formula Li 5.5 PS 4.5 Cl x Br 1.5‐x (0≤x≤1.5). Using neutron powder diffraction and 31 P magic‐angle spinning nuclear magnetic resonance spectroscopy, the S 2− /Cl − /Br − occupancy on the anion sublattice was quantitatively analyzed. We show that disorder positively affects Li‐ion dynamics, leading to a room‐temperature ionic conductivity of 22.7 mS cm −1 (9.6 mS cm −1 in cold‐pressed state) for Li 5.5 PS 4.5 Cl 0.8 Br 0.7 (ΔS conf =1.98R). To the best of our knowledge, this is the first experimental evidence that configurational entropy of the anion sublattice correlates with ion mobility. Our results indicate the possibility of improving ionic conductivity in ceramic ion conductors by tailoring the degree of compositional complexity. Moreover, the Li 5.5 PS 4.5 Cl 0.8 Br 0.7 SE allowed for stable cycling of single‐crystal LiNi 0.9 Co 0.06 Mn 0.04 O 2 (s‐NCM90) composite cathodes in SSB cells, emphasizing that dual‐substituted lithium argyrodites hold great promise in enabling high‐performance electrochemical energy storage.

Chemistry↗
DOE OSTI2018

Spatially-correlated Site Occupancy in the Nonstoichiometric Meta-stable ε -Al 60 Sm 11 Phase during Devitrification of Al-10.2 at.% Sm Glasses

A metastable ε-Al 60 Sm 11 phase appears during the initial devitrification of as-quenched Al-10.2 at.% Sm glasses. The ε phase is nonstoichiometric in nature since Al occupation is observed on the 16 f Sm lattice sites. Scanning transmission electron microscopic images reveal profound spatial correlation of Sm content on these sites, which cannot be explained by the “average crystal” description from Rietveld analysis of diffraction data. Thermodynamically favorable configurations, established by Monte Carlo (MC) simulations based on a cluster-expansion model, also give qualitatively different correlation functions from experimental observations. On the other hand, molecular dynamics simulations of the growth of ε-Al 60 Sm 11 in undercooled liquid show that when the diffusion range of Sm is limited to ~4 Å, the correlation function of the as-grown crystal structure agrees well with that of the scanning transmission electronic microscopy (STEM) images. Furthermore, our results show that kinetic effects, especially the limited diffusivity of Sm atoms plays the fundamental role in determining the nonstoichiometric site occupancies of the ε-Al 60 Sm 11 phase during the crystallization process.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Unusual Redox Behavior of Ceria and Its Interaction with Hydrogen

The reaction between ceria and hydrogen has been subject to numerous theoretical and experimental studies because of its importance as a catalytic material. Here, we present dynamic and reversible evolution of the cerium oxidation states observed through X-ray absorption spectroscopy experiments in addition to the investigation of associated lattice expansion and contraction through X-ray diffraction and PDF methods. Employing a novel calculation of the temperature dependence of the Gibbs free energy through consideration of the relationship between the instantaneous thermal lattice expansion and the rate of change of the cerium oxidation state, the unusual redox chemistry is reported here. Furthermore, this unusual behavior is interpreted to be due to the formation of a metastable cerium oxyhydride as suggested.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

X-ray Free Electron Laser Radiation Damage through the S-State Cycle of the Oxygen-Evolving Complex of Photosystem II

The oxygen-evolving complex (OEC) catalyzes water-splitting through a reaction mechanism that cycles the OEC through the “S-state” intermediates. Understanding structure/function relationsships of the S-states is crucial for elucidating the water-oxidation mechanism. Serial femtosecond X-ray crystallography has been used to obtain radiation damage-free structures. However, it remains to be established whether “diffraction-before-destruction” is actually accomplished or if significant changes are produced by the high-intensity X-ray pulses during the femtosecond scattering measurement. Here, we use ab initio molecular dynamics simulations to estimate the extent of structural changes induced on the femtosecond time scale. We found that the radiation damage is dependent on the bonding and charge of each atom in the OEC, in a manner that may provide lessons for XFEL studies of other metalloproteins. The maximum displacement of Mn and oxygen centers is 0.25 and 0.39 Å, respectively, during the 50 fs pulse, which is significantly smaller than the uncertainty given the 1.9 Å resolution of the current PSII crystal structures. However, these structural changes might be detectable when comparing isomorphous Fourier differences of electron density maps of the different S-states. Lastly, one conclusion is that pulses shorter than 15 fs should be used to avoid significant radiation damage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Charge correlations and magnetoelastic coupling in intercalated transition metal dichalcogenides

The large van der Waals gap in transition metal dichalcogenides (TMDs) offers an avenue to tune the ground state of 2D materials through the intercalation of magnetic atoms. Here, we investigate the charge correlations in Fe 1/3 ⁢TaS 2 , Co 1/3 ⁢TaS 2 , and Fe 0.35 ⁢NbS 2 by combining angle-resolved photoemission spectroscopy (ARPES), x-ray scattering, magnetometry, and density functional theory (DFT). We find that, while short-range charge fluctuations develop in Ta-based compounds, Fe 0.35 ⁢NbS 2 exhibits long-range charge order which is strongly coupled with magnetic order and tunable by external magnetic field. Our electronic structure analysis reveals that intercalation reconstructs the Fermi surface via charge transfer and band renormalization, yet does not generate the nesting conditions compatible with the observed ordering vectors. Complementary phonon calculations further exclude a conventional electron-phonon origin of charge order. Together, these results establish magnetoelastic coupling as the dominant mechanism behind charge ordering in Fe 0.35 ⁢NbS 2 and highlight the contrasting role of Nb and Ta hosts in stabilizing correlated ground states in intercalated TMDs.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Thermal properties of the metallic delafossite PdCo⁢O 2 : A combined experimental and first-principles study

Metallic delafossite materials (e.g., PdCo⁢O 2 , PtCo⁢O 2 ), have attracted much recent attention due to record-high oxide conductivities, the origins of which remain unclear. Relatively little attention has been paid to their related thermal properties, however. Here, we address this via wide temperature range experimental studies of the crystal structure, thermal expansion, and specific heat of single-crystal PdCo⁢O 2 , combined with density-functional theory (DFT) calculations of the electronic and phononic densities of states, and thus thermal properties. PdCo⁢O 2 is shown to retain the $R\bar{3}m$ space group from 12 to 1000 K, exhibiting a- and c-axis thermal expansion in good quantitative agreement with DFT-based lattice dynamics calculations. The Co-O bond lengths additionally elucidate the stability of the low-spin state of the nominally Co 3+ ions, which is a notable difference between the edge-shared Co-O octahedra in PdCo⁢O 2 and the corner-shared octahedra in Co-based perovskites. Measurements of specific heat from 1.9 to 400 K provide accurate values for the Debye temperature and Sommerfeld coefficient, the phononic part being describable via a combined Debye-Einstein approach (accounting for high-frequency oxygen-related optical phonons), with excess intermediate-temperature specific heat due to a prominent low-energy peak in the phonon density of states. Most significantly, all electronic and phononic contributions to the specific heat are shown to be remarkably closely reproduced by DFT-based calculations, establishing quantitative understanding of key thermal properties of the metallic delafossite PdCo⁢O 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2018

Measuring femtometer lattice displacements driven by free carrier diffusion in a polycrystalline semiconductor using time-resolved x-ray scattering

We show that time-resolved x-ray scattering can be applied to polycrystalline materials for the measurement of carrier diffusion. A polycrystalline indium antimonide sample is prepared by high-intensity ultrafast laser surface melting and re-solidification under vacuum to create randomly oriented grains with an average size of 13 nm. Two static diffraction rings are simultaneously observed on a gated pixel array detector. Their centroids move following lower-intensity laser excitation, and utilizing an in-situ angular calibration, the transient lattice spacing is determined with femtometer accuracy, thereby allowing the measurement of charge carrier dynamics. Compared to bulk calculations, we find that carrier diffusion slows by more than one order of magnitude. This result provides evidence for the formation of potential energy barriers at the grain boundaries and demonstrates the capability of time-resolved x-ray scattering to probe nanoscale charge transport in materials other than near-perfect crystals.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Structural response of α-quartz under plate-impact shock compression

Because of its far-reaching applications in geophysics and materials science, quartz has been one of the most extensively examined materials under dynamic compression. Despite 50 years of active research, questions remain concerning the structure and transformation of SiO 2 under shock compression. Continuum gas-gun studies have established that under shock loading quartz transforms through an assumed mixed-phase region to a dense high-pressure phase. While it has often been assumed that this high-pressure phase corresponds to the stishovite structure observed in static experiments, there have been no crystal structure data confirming this. In this study, we use gas-gun shock compression coupled with in situ synchrotron x-ray diffraction to interrogate the crystal structure of shock-compressed α-quartz up to 65 GPa. Our results reveal that α-quartz undergoes a phase transformation to a disordered metastable phase as opposed to crystalline stishovite or an amorphous structure, challenging long-standing assumptions about the dynamic response of this fundamental material.

58 GEOSCIENCES↗