Search NASA⌕ Search

SEARCH · Search NASA

Results for “electrode interface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Hole transport layer selection for stable and efficient carbon electrode-based perovskite solar cells

Perovskite solar cell (PSC) technology has achieved remarkable progress, with champion power conversion efficiencies (PCE) exceeding 26%. However, the long-term stability of PSCs remains a significant barrier to their widespread commercialization. Carbon-based PSCs (C-PSCs) have gained attention as a promising cost-effective and scalable production solution, replacing expensive metal electrodes and offering improved stability. Despite these advantages, C-PSCs face challenges in matching the performance of noble metal-based PSCs, particularly in terms of carrier extraction efficiency and reduced carrier recombination at the carbon/perovskite interface. The selection of hole transport materials (HTMs) is crucial for optimizing this interface, but comprehensive studies on HTM selection for C-PSCs are limited. This study systematically investigated three commonly used hole transport layers (HTLs): Spiro-OMeTAD, CuSCN, and PTAA. Our results show that Spiro-OMeTAD-based C-PSCs exhibit the best overall performance, achieving a PCE of 19.29%. CuSCN-based devices, while lower in efficiency (11.94% PCE), demonstrated superior stability, retaining approximately 60% of their initial performance after 500 hours under ambient conditions. PTAA-based devices achieved a PCE of 12.92% but exhibited significant degradation, maintaining only ∼35% of their original efficiency over the same duration. These findings highlight the importance of selecting HTLs that balance performance and stability and emphasize the need for further optimization to enhance the commercial viability of C-PSCs.

14 SOLAR ENERGY↗
NASA NTRS1974

Casting copper to tungsten for high-power arc lamp cathodes

Voids forming at interface when copper is cast onto tungsten can be eliminated by adding wetting agent during casting process. Small amount of copper and nickel are cast onto thoriated tungsten insert, insert is recast with more copper to form electrode. Good thermal conductance results in long-lived cathode.

Will, H. A.↗
DOE OSTI2017

Photoelectrochemical Properties and Stability of Nanoporous p-Type LaFeO 3 Photoelectrodes Prepared by Electrodeposition

LaFeO 3 is a p-type oxide that has an ideal bandgap and band edge positions for overall solar water splitting. This study reports an electrochemical synthesis method to produce LaFeO 3 as a high surface area, nanoporous photocathode. The resulting electrode generated a photocurrent density of 0.1 mA/cm 2 at a potential as positive as 0.73 V vs. RHE for photoelectrochemical oxygen reduction with a photocurrent onset potential very close to its flatband potential of 1.45 V vs. RHE. Furthermore, without a protection layer it showed a stable photocurrent generation with no sign of photocorrosion. Due to the poor catalytic nature of the LaFeO 3 surface for water reduction, photocurrent obtained for water reduction was not substantial. Furthermore, its photostability and its ability to achieve a photovoltage for water reduction greater than 1.2 V encourage further studies on doping to enhance electron-hole separation as well as interfacing appropriate hydrogen evolution catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Bipolar Membranes for Ion Management in (Photo)Electrochemical Energy Conversion

Conspectus (Photo)electrochemical energy conversion is important in the development of a carbon-neutral energy economy because it can provide a pathway for mitigating the intermittency of renewable energy sources such as wind and solar. In order to operate efficiently, these technologies, which include photoelectrochemical cells, water and CO 2 electrolyzers, fuel cells, and redox flow batteries, require fast charge transfer kinetics at the electrode/electrolyte interface as well as robust ion management in the electrolyte. In conventional electrolyzers and fuel cells, the electrolyte is strongly acidic or basic and ionic current is carried by H + or OH – ions. In contrast, photoelectrodes and electrocatalysts for water splitting are often studied in buffered solutions. The question of ion balance in these systems led us to analyze the polarization losses due to ion concentration gradients in cells that employed various buffer–membrane combinations. Continuously driving the buffer ions across an ionomer membrane not only lowers the buffer capacity of an aqueous electrolyte but also introduces pH gradients that result in significant energy losses. To address the problem, we and other groups have studied the use of reverse-biased bipolar membranes (BPMs) in (photo)electrolytic cells. BPMs consist of an anion exchange layer (AEL) laminated with a cation exchange layer (CEL) and are usually equipped with a catalytic layer in between to accelerate the water dissociation reaction. At the AEL/CEL interface, water dissociates into protons and hydroxide ions, which replenish those consumed at the cathode and anode. Compared to conventional water electrolyzers with proton/anion exchange membranes (PEM/AEM), BPM electrolyzers provide the unique advantage of continuously operating the cathode and anode under different pH conditions, which is desirable when the two electrode reactions have different pH requirements. BPMs also enable the use of buffered electrolytes at pH values that are optimized for electrode stability and product selectivity in applications such as CO 2 electrolysis. Product crossover losses and CO 2 pumping can be dramatically reduced in BPM-based CO 2 electrolyzers, relative to conventional alkaline membranes, by electrostatic repulsion (of anionic products) and electroosmotic drag (for neutral products). BPM-based gas fed CO 2 electrolyzers can achieve high current density, but they suffer from low Faradaic efficiency (FE) due to the acidic local environment of the CEL. This problem can be mitigated by adding an aqueous buffering layer or by creating a weak acid cation exchange film on the CEL face of the membrane. The use of BPMs in fuel cells and redox flow batteries offers some interesting advantages. Configurations with both reverse and forward bias have been studied, but forward bias has been favored due to material compatibility, reaction kinetics, and thermodynamic considerations. The net reaction at the AEL/CEL interface is the acid–base neutralization reaction, which has a high inherent reaction rate constant, but in the BPM is limited to a nanometric space-charge layer and requires efficient catalysis to achieve high current density. Understanding the mechanism of the acid–base neutralization and the opposite process, the water dissociation reaction, will be essential for improving the performance of forward-biased BPMs. In conclusion, this Account reviews our current understanding of the working mechanisms of BPMs and discusses how we can use them to effectively manage ions for various (photo)electrochemical applications.

Yan, Zhifei↗
DOE OSTI2023

Substrate-Driven Catalyst Reducibility for Oxygen Evolution and Its Effect on the Operation of Proton Exchange Membrane Water Electrolyzers

To increase the efficiency of hydrogen production by proton exchange membrane water electrolyzers (PEMWEs), the relationships between the specific activity and stability of the membrane–electrode assembly (MEA) must be clarified. Ir oxide electrodeposited on Ti substrate is used as an oxygen electrode, and its electronic properties and electrochemical behavior in PEMWE operation are observed. The electrode, fabricated through a facile strategy based on annealing in the air atmosphere, enhances the specific oxygen evolution reaction (OER) activity and stability in PEMWE operation. Furthermore, the electronic catalyst–substrate interactions associated with different reducibilities in the heteroatom system are studied. The morphology, electronic properties, and chemical state of the oxygen electrode are investigated through X-ray spectroscopy, microscopy techniques, and computational analyses. Thermal treatment of the catalyst-coated substrate decreases the bulk oxidation state of Ir and increases the surface oxidation state. According to the electrochemical and physical behavior analyses of PEMWEs, the oxygen content in the Ir oxide structure, which defines the OER activity and its stability, is influenced by the crystalline structure and formation of a stable interface between the catalyst and substrate. The outcomes can facilitate the development of strategies for enhancing the performance of PEMWEs and designing rational MEAs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Fabrication of CdSe nanoparticles sensitized TiO2 nanotube arrays via pulse electrodeposition for photoelectrochemical application

Highlights: • Anodization method approach for the synthesis of TiO{sub 2} nanotubes. • CdSe nanoparticle/TiO{sub 2} nanotube arrays were assembled via pulse electrochemical deposition technique. • Duty cycles were applied in order to enhance the properties of CdSe/TiO{sub 2} nanostructure. • PEC analysis verified that CdSe/TiO{sub 2} structure prepared at 50% duty cycle gave best photocurrent response. • Photoconversion efficiency of CdSe/TiO{sub 2} nanostructure was approximately 59 times greater than TiO{sub 2} nanotubes. - Abstract: Solar energy is an alternative sustainable energy resource that can be harvested using photoelectrochemical cell comprised of inorganic sensitized nanostructured oxide semiconductor electrode. In this work, pulse electrodeposition was used to deposit CdSe onto titanium dioxide nanotube arrays (TiO{sub 2} NTAs). TiO{sub 2} NTAs are commonly used in the nanostructured photoelectrochemical cells due to their high surface area, fewer interfacial grain boundaries and excellent charge transfer between interfaces. Duty cycle of pulse electrodeposition played an important role in the formation of CdSe nanoparticles. A significant enhancement in the photoelectrochemical performance was observed for the heterostructure of CdSe/TiO{sub 2} NTAs. CdSe/TiO{sub 2} NTAs prepared at 50% duty cycle exhibited maximum photocurrent of 1.94 mA cm{sup −2} and photoconversion efficiency of 1.18% which was 59 times higher than bare TiO{sub 2} NTAs. These results demonstrated that significant enhancement in the photoconversion efficiency could be obtained by incorporating CdSe as sensitizer into the TiO{sub 2} nanotube arrays via pulse electrodeposition technique.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Geobacter sulfurreducens Immobilized Boron-Doped Diamond Electrodes for Uranium(VI) in Water Electrochemical Bioremediation

The proliferation of nuclear science and technology has resulted in an increase in nuclear waste containing uranium, posing significant risks to both human and environmental health. This study proposes the use of Geobacter sulfurreducens (G. sulfurreducens) modified boron-doped diamond electrodes to facilitate the reduction and removal of uranium(VI) from aqueous media. The bioremediation process involves electrochemically immobilizing the bacteria on a boron-doped diamond electrode (BDD). The immobilization process requires applying reduction potentials ranging from −0.40 to −0.70 V (vs Ag/AgCl (3 M NaCl)), with −0.60 V identified as the optimal potential for effective bacterial modification. The uranium source is provided by a 2.0 mM uranyl acetate solution in G. sulfurreducens growth medium. Scanning electron microscopy (SEM) reveals a highly uniform layer of uranium on the electrode surface. Energy-dispersive X-ray fluorescence spectroscopy (EDS) and cyclic voltammetry (CV) studies confirm the presence of uranium in the system. Raman spectroscopy and X-ray photoelectron spectroscopy (XPS) successfully elucidate the reduction process of U(VI) to predominantly U(IV) using a bacteria-electrode coupled system. Additionally, a comparison is made with the electrochemical removal of uranyl ions using the electrodeposition method on unmodified BDD. Results demonstrate the presence of three uranium oxide species (UO 2 , UO 3 , and U 3 O 8 ) on the BDD electrode after experimentation, in contrast to the G. sulfurreducens/BDD assembly, which achieves the predominant reduction of UO 2 2+ to UO 2 with a small quantity of UO 3 as the final species. This study highlights the efficient electrochemical removal of uranyl ions from aqueous media at the G. sulfurreducens/BDD interface through chronoamperometry, presenting a promising approach for remediating sites contaminated with radioactive materials. The findings contribute to the exploration of sustainable alternatives for managing nuclear waste, emphasizing the potential of this electrochemical bioremediation strategy.

Bacteria↗
DOE OSTI2017

Ternary Organic Solar Cells with Minimum Voltage Losses

Abstract A new strategy for designing ternary solar cells is reported in this paper. A low‐bandgap polymer named PTB7‐Th and a high‐bandgap polymer named PBDTTS‐FTAZ sharing the same bulk ionization potential and interface positive integer charge transfer energy while featuring complementary absorption spectra are selected. They are used to fabricate efficient ternary solar cells, where the hole can be transported freely between the two donor polymers and collected by the electrode as in one broadband low bandgap polymer. Furthermore, the fullerene acceptor is chosen so that the energy of the positive integer charge transfer state of the two donor polymers is equal to the energy of negative integer charge transfer state of the fullerene, enabling enhanced dissociation of all polymer donor and fullerene acceptor excitons and suppressed bimolecular and trap assistant recombination. The two donor polymers feature good miscibility and energy transfer from high‐bandgap polymer of PBDTTS‐FTAZ to low‐bandgap polymer of PTB7‐Th, which contribute to enhanced performance of the ternary solar cell.

Wang, Chuanfei↗
DOE OSTI2025

Spontaneous sodium ion storage behaviors of reduced graphene oxide anodes exceeding 100% Coulombic efficiency by modulated ion solvation

Rechargeable batteries are essential energy storage devices that power portable devices and electrical vehicles throughout the world. In general, it is thought that the electrochemical performance of rechargeable batteries is mostly determined by the electrodes within them and that the electrolyte plays a relatively passive role. However, ion transport and storage can be greatly influenced by the electrolyte solution structure, specifically, ion solvation within the bulk and ion desolvation across the electrode/electrolyte interfaces. Herein, we studied the role of the electrolyte as an active component of electrochemical energy storage devices. We found that with an appropriate electrolyte formulation, ion storage in disordered carbonaceous anode materials can occur spontaneously without externally supplied electrical energy. Reduced graphene oxide (RGO) in an ether-based electrolyte demonstrates ‘spontaneous' ion storage behaviors of adsorbing and inserting the solvated ions utilizing facilitated permeability and wettability of RGO, which results in Coulombic efficiency of ~145% due to additional charging capacity of ~180 mAh g -1 during electrochemical processes. The unexpected spontaneous ion storage behavior was extensively investigated using a combination of electrochemical analyses and diagnostics, advanced characterizations, and computational simulation. In conclusion, we believe the spontaneous ion storage behavior offers a new way to further improve the energy efficiency of practical rechargeable batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Tunable surface acoustic wave device using semiconducting MgZnO and piezoelectric NiZnO dual-layer structure on glass

Tunable surface acoustic wave (SAW) devices have attracted considerable interests due to its applications in emerging fields, such as secured wireless communication, adaptive signal processing, and smart sensing systems. We report a dual-input-voltage-controlled tunable SAW built on glass, which uses a ZnO-based dual-layer structure consisting of a piezoelectric Ni- doped ZnO (NZO) and semiconducting Mg-doped ZnO (MZO). The interdigital (IDT) electrodes are buried in the piezoelectric NZO layer to form the delay line for SAW propagation, while the semiconductor MZO layer serves as the channel of a thin film transistor (TFT) to modulate the conductivity. Results show the interface between MZO channel and SiO 2 gate dielectric layer of the TFTT significantly impacts on SAW tuning performances due to Zn diffusion from MZO into SiO 2 . The TFT-SAW device using an ultra-thin MgO layer as interface modification enables SAW frequency tuning of 0.53% under solely V gs control with 0–12 V. The required voltage range is significantly reduced compared regular MZO-NZO TFT-SAW counterpart (Δf/f c ~ 0.25%; V gs –30 to –14 V) without interface modification. With additional control of V ds , the SAW frequency tunability is further expanded from 0.46% to 0.63%. As a result, this dual-input voltage-controlled frequency tuning device on glass is promising for low-voltage, low-cost portable smart sensors and voltage-controlled reconfigurable radio-frequency identification tags.

36 MATERIALS SCIENCE↗
NASA NTRS1981

NASA preprototype redox storage system for a photovoltaic stand-alone application

A 1-kW preprototype redox storage system that has undergone characterization tests and been operated as the storage device for a 5-kW (peak) photovoltaic array is described and performance data are presented. Loss mechanisms are discussed, and simple design changes leading to appreciable increases in efficiency are suggested. The effects on system performance of nonequilibrium between the predominant species of complexed chromic ion in the negative electrode reactant solution are summarized. It is noted that with the aid of the prototype system, control concepts have been shown to be valid and trouble free and some insight has been gained into interactions at the mutual interfaces of the redox system, the photovoltaic array, the load, and the control devices.

Hagedorn, N. H.↗
NASA NTRS2012

An Integrated, Layered-Spinel Composite Cathode for Energy Storage Applications

At low operating temperatures, commercially available electrode materials for lithium-ion batteries do not fully meet the energy and power requirements for NASA fs exploration activities. The composite cathode under development is projected to provide the required energy and power densities at low temperatures and its usage will considerably reduce the overall volume and weight of the battery pack. The newly developed composite electrode material can provide superior electrochemical performance relative to a commercially available lithium cobalt system. One advantage of using a composite cathode is its higher energy density, which can lead to smaller and lighter battery packs. In the current program, different series of layered-spinel composite materials with at least two different systems in an integrated structure were synthesized, and the volumetric and gravimetric energy densities were evaluated. In an integrated network of a composite electrode, the effect of the combined structures is to enhance the capacity and power capabilities of the material to levels greater than what is possible in current state-of-the-art cathode systems. The main objective of the current program is to implement a novel cathode material that meets NASA fs low temperature energy density requirements. An important feature of the composite cathode is that it has at least two components (e.g., layered and spinel) that are structurally integrated. The layered material by itself is electrochemically inactive; however, upon structural integration with a spinel material, the layered material can be electrochemically activated, thereby delivering a large amount of energy with stable cycling. A key aspect of the innovation has been the development of a scalable process to produce submicronand micron-scale particles of these composite materials. An additional advantage of using such a composite electrode material is its low irreversible loss (.5%), which is primarily due to the unique activation of the composite. High columbic efficiency (greater than 99%) upon cycling may indicate the formation of a stable SEI (solid-electrolyte interface) layer, which can contribute to long cycle life. The innovation in the current program, when further developed, will enable the system to maintain high energy and power densities at low temperatures, improve efficiency, and further stabilize and enhance the safety of the cell.

Hagh, Nader↗
DOE OSTI2020

Fabrication of high-performance gas-diffusion-electrode based membrane-electrode assemblies

This paper demonstrates the fabrication and processing steps required to produce high performance fuel cell membrane electrode assemblies (MEAs) based on spray-coated gas-diffusion electrodes (GDEs). It is demonstrated that coating the catalyst layer with a thin layer of ionomer and then hot pressing the GDEs to the membrane is required to achieve comparable catalyst activity and air performance to catalyst-coated-membrane MEAs. We show that there is a critical amount of ionomer required to achieve maximized performance. Using electron microscopy, we show that the combination of the ionomer overlayer and hot-pressing bonds the catalyst layer to the membrane, increasing the interfacial contact area and quality of this interface. We also find that the ionomer overlayer smooths the surface of the GDE and provides increased contact area between the GDE and the membrane. Additionally, we demonstrate that much less ionomer is required for high-performance than has been previously reported. Through model fitting of electrochemical impedance spectroscopy, we show that this improvement in the catalyst layer - membrane interface reduces the effective catalyst layer resistance, which reduces Ohmic losses and increases catalyst utilization.

33 ADVANCED PROPULSION SYSTEMS↗
NASA NTRS2000

Electrolyte and Electrode Passivation for Thin Film Batteries

Passivation films for thin film batteries have been prepared and the conductivity and voltage stability window have been measured. Thin films of Li2CO3 have a large voltage stability window of 4.8V, which facilitates the use of this film as a passivation at both the lithium anode-electrolyte interface at high cathodic potentials.

passivation thin film batteries↗
DOE OSTI2023

Robust Interfacial Effect in Multi-interface Environment through Hybrid Reconstruction Chemistry for Enhanced Energy Storage

Electrochemical-oxidation-driven reconstruction has emerged as an efficient approach for developing advanced materials, but the reconstructed microstructure still faces challenges including inferior conductivity, unsatisfying intrinsic activity, and active-species dissolution. In this report we present hybrid reconstruction chemistry that synergistically couples electrochemical oxidation with electrochemical polymerization (EOEP) to overcome these constraints. During the EOEP process, the metal hydroxides undergo rapid reconstruction and dynamically couple with polypyrrole (PPy), resulting in an interface-enriched microenvironment. We observe that the interaction between PPy and the reconstructed metal center (i.e., Mn > Ni, Co) is strongly correlated. Theoretical calculation results demonstrate that the strong interaction between Mn sites and PPy breaks the intrinsic limitation of MnO 2 , rendering MnO 2 with a metallic property for fast charge transfer and enhancing the ion-adsorption dynamics. Operando Raman measurement confirms the promise of EOEP-treated Mn(OH) 2 (E-MO/PPy) to stably work under a 1.2 V potential window. The tailored E-MO/PPy exhibits a high capacitance of 296 F g –1 at a large current density of 100 A g –1 . Here our strategy presents breakthroughs in upgrading the electrochemical reconstruction technique, which enables both activity and kinetics engineering of electrode materials for better performance in energy-related fields.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Stabilizing *CO 2 Intermediates at the Acidic Interface using Molecularly Dispersed Cobalt Phthalocyanine as Catalysts for CO 2 Reduction

Abstract CO 2 electroreduction (CO 2 R) operating in acidic media circumvents the problems of carbonate formation and CO 2 crossover in neutral/alkaline electrolyzers. Alkali cations have been universally recognized as indispensable components for acidic CO 2 R, while they cause the inevitable issue of salt precipitation. It is therefore desirable to realize alkali‐cation‐free CO 2 R in pure acid. However, without alkali cations, stabilizing *CO 2 intermediates by catalyst itself at the acidic interface poses as a challenge. Herein, we first demonstrate that a carbon nanotube‐supported molecularly dispersed cobalt phthalocyanine (CoPc@CNT) catalyst provides the Co single‐atom active site with energetically localizeddstates to strengthen the adsorbate‐surface interactions, which stabilizes *CO 2 intermediates at the acidic interface (pH=1). As a result, we realize CO 2 conversion to CO in pure acid with a faradaic efficiency of 60 % at pH=2 in flow cell. Furthermore, CO 2 is successfully converted in cation exchanged membrane‐based electrode assembly with a faradaic efficiency of 73 %. For CoPc@CNT, acidic conditions also promote the intrinsic activity of CO 2 R compared to alkaline conditions, since the potential‐limiting step, *CO 2 to *COOH, is pH‐dependent. This work provides a new understanding for the stabilization of reaction intermediates and facilitates the designs of catalysts and devices for acidic CO 2 R.

Chemistry↗
DOE OSTI2021

Parametric analysis of anodic degradation mechanisms for fast charging lithium batteries with graphite anode

In this work, we report the impact of the temperature-driven synergistically-coupled anodic degradation mechanisms on the electrochemical performance of lithium batteries with graphite anode over multiple cycles. Temperature dependence of electrochemical reactions and damage mechanisms, such as solid electrolyte interface (SEI) growth, lithium plating/stripping, dead lithium storage/dissolution, and film cracking are incorporated into the degradation model. Results of a parametric analysis are presented, evaluating the effects of charging rates (1–6 C), operating temperatures (-15 – 45°C) and electrode design parameters, on the relative performance fade in the lithium-ion battery. Thermo-electrochemical process maps are developed to provide insights into the relationship between electrode performance and failure mechanisms. The simulation results predict a severe capacity loss due to lithium plating at low temperatures, which is further aggravated at high charging rates. A common strategy for mitigating lithium plating, through charging at high temperatures, also results in rapid capacity loss due to accelerated SEI formation. Simulation results are used to identify the combination of operating conditions and electrode design parameters that improve the electrochemical performance of the battery. These results demonstrate an opportunity to design safe and high-performance lithium-ion batteries, guided by anodic degradation models.

Battery design↗
DOE OSTI2021

Large mass single electron resolution detector for dark matter and neutrino elastic interaction searches

Large mass single electron resolution solid state detectors are desirable to search for low mass dark matter candidates and to measure coherent elastic neutrino nucleus scattering (CEvNS). In this paper we present results from a novel 100 g phonon-mediated Si detector with a new interface architecture. This detector gives a baseline resolution of ~ 1e - /h + pair and a leakage current on the order of 10 -16 A. This was achieved by removing the direct electrical contact between the Si crystal and the metallic electrode, and by increasing the phonon absorption efficiency of the sensors. The phonon signal amplification in the detector shows a linear increase while the signal to noise ratio improves with bias voltage, up to 240 V. This feature enables the detector to operate at a low energy threshold which is beneficial for dark matter and CEvNS like searches.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗