Search NASA⌕ Search

SEARCH · Search NASA

Results for “emission factor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Direct uranium enrichment assay in gaseous uranium hexafluoride with laser induced breakdown spectroscopy

A set of eleven U atomic emission lines, between 421.099 and 421.460 nm, were characterized for direct enrichment assay of gaseous UF 6 samples with laser induced breakdown spectroscopy (LIBS). Several iterative, multivariate nonlinear spectral-fitting algorithms were evaluated for their efficacies to extract the enrichment information from the measured LIBS spectra. Furthermore, wavelength-dependent weight factors, which take into consideration of the spectral-line position in the fitting model, the determined isotopic ratio, and the isotopic shift of the emission line, are essential for the spectral-fitting model to function adequately. The analytical accuracies and precision were typically within 0.5% in absolute [ 235 U/( 235 U + 238 U)] ratios.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
NASA NTRS1978

Uhuru observations of X-ray emission from Seyfert galaxies

A point summation technique has been used to analyze systematically the Uhuru data for X-ray emission from the 88 Seyfert galaxies listed by Weedman (1977), plus MCG 8-11-11 reported by the Ariel 5 group. In addition to measuring the average X-ray intensity for 15 sources reported in the 4U and 2A catalogs, three new candidate sources are found. X-ray variability has previously been reported for NGC 4151, 3C 390.3, and MCG 8-11-11; Mrk 279 is now also found to vary. Furthermore, significant flaring activity from NGC 4151 was observed with as much as a factor of 10 increase in intensity on a time possibly as short as 730 seconds. The local X-ray volume emissivity of Seyfert galaxies is measured, and it is found, with standard assumptions, that from 6% to 25% of the diffuse 2-10-keV X-ray background can be attributed to emission from Seyfert galaxies. The data show that the luminosity function for X-ray Seyferts is rather steep.

Tananbaum, H.↗
DOE OSTI2022

Continental United States may lose 1.8 petagrams of soil organic carbon under climate change by 2100

Abstract Aims High‐resolution information on soils’ vulnerability to climate‐induced soil organic carbon (SOC) loss can enable environmental scientists, land managers, and policy makers to develop targeted mitigation strategies. This study aims to estimate baseline and decadal changes in continental US surface SOC stocks under future emission scenarios. Location Continental United States. Time period 2014–2100. Methods We used recent SOC field observations ( n = 6,213 sites), environmental factors ( n = 32), and an ensemble machine learning (ML) approach to estimate baseline SOC stocks in surface soils across the continental United States at 100‐m spatial resolution, and decadal changes under the projected climate scenarios of Coupled Model Intercomparison Project Phase Six (CMIP6) earth system models (ESMs). Results Baseline SOC projections from ML approaches captured more than 50% of variability in SOC observations, whereas ESMs represented only 6–16% of observed SOC variability. ML estimates showed a mean total loss of 1.8 Pg C from US surface soils under the high‐emission scenario by 2100, whereas ESMs showed no significant change in SOC stocks with wide variation among ESMs. Both ML and ESM predictions agree on the direction of SOC change (net emissions or sequestration) across 46–51% of continental US land area. These differences are attributable to the high‐resolution site‐specific data used in the ML models compared to the relatively coarse grid represented in CMIP6 ESMs. Main conclusions Our high‐resolution estimates of baseline SOC stocks, identification of key environmental controllers, and projection of SOC changes from US land cover types under future climate scenarios suggest the need for high‐resolution simulations of SOC in ESMs to represent the heterogeneity of SOC. We found that the SOC change is sensitive to key soil related factors (e.g. soil drainage and soil order) that have not been historically considered as input parameters in ESMs, because currently more than 95% variability in the SOC of CMIP6 ESMs is controlled by net primary productivity, temperature, and precipitation. Using additional environmental factors to estimate the baseline SOC stocks and predict the future trajectory of SOC change can provide more accurate results.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2012

Fire-induced Carbon Emissions and Regrowth Uptake in Western U.S. Forests: Documenting Variation Across Forest Types, Fire Severity, and Climate Regions

The forest area in the western United States that burns annually is increasing with warmer temperatures, more frequent droughts, and higher fuel densities. Studies that examine fire effects for regional carbon balances have tended to either focus on individual fires as examples or adopt generalizations without considering how forest type, fire severity, and regional climate influence carbon legacies. This study provides a more detailed characterization of fire effects and quantifies the full carbon impacts in relation to direct emissions, slow release of fire-killed biomass, and net carbon uptake from forest regrowth. We find important variations in fire-induced mortality and combustion across carbon pools (leaf, live wood, dead wood, litter, and duff) and across low- to high-severity classes. This corresponds to fire-induced direct emissions from 1984 to 2008 averaging 4 TgC/yr and biomass killed averaging 10.5 TgC/yr, with average burn area of 2723 sq km/yr across the western United States. These direct emission and biomass killed rates were 1.4 and 3.7 times higher, respectively, for high-severity fires than those for low-severity fires. The results show that forest regrowth varies greatly by forest type and with severity and that these factors impose a sustained carbon uptake legacy. The western U.S. fires between 1984 and 2008 imposed a net source of 12.3 TgC/yr in 2008, accounting for both direct fire emissions (9.5 TgC/yr) and heterotrophic decomposition of fire-killed biomass (6.1 TgC yr1) as well as contemporary regrowth sinks (3.3 TgC/yr). A sizeable trend exists toward increasing emissions as a larger area burns annually.

Forest↗
DOE OSTI2023

Quantifying uncertainty in Pareto estimates of global lake area

Abstract Size is a critical factor determining the rate and occurrence of specific lake processes such as carbon sequestration and greenhouse gas emissions and emerging evidence suggests that small lakes in particular have particularly large CO 2 flux rates. Because we do not have a complete census of all lakes, upscaling estimates of such processes to small lakes at broad spatial scales requires the use of lake size‐abundance distributions rather than empirical measurements of area. Existing lake census efforts are incomplete such that as lakes become smaller, they are more likely to be omitted either because they are too small to be resolved from remote sensing products or because of limited ground surveying effort (i.e., “censoring” of small lakes relative to large lakes). The present study explores one potential shortcoming of prior approaches estimating global lake area using lake size‐abundance distributions. Namely, that these prior approaches rely on frequentist curve fitting techniques combined with an ad‐hoc cutoff determination strategy (visual inspection to determine a likely censoring point). This yields an over‐exact lake area estimate that is typically reported with no uncertainty bounds. I show how these shortcomings can be addressed with a Bayesian model that produces larger estimates of lake area uncertainty relative to the typical approach. When used as part of a sensitivity analysis, such an approach has the potential to enable more robust intercomparisons among studies of aquatic processes upscaling.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Emerging Technologies for Decarbonizing Silicon Production

Abstract Silicon (Si) is an important material for alloying, solar photovoltaics, and electronics. However, current methods of producing silicon require energy consumption of around 11–13 kWh/kg Si and direct carbon emissions are 4.7–5 tons CO 2 per ton Si which conflicts with global efforts to limit climate change. In this work, we discuss several promising methods for reducing or eliminating carbon emissions from the silicon production process. Such methods include using biocarbon, integrating the current process with carbon capture and utilization/storage (CCU/CCS), metallothermic reduction, hydrogen reduction, and molten salt electrolysis. We present the positive aspects and challenges of each approach. Biocarbon coupled with CCU/CCS is the most industrially mature technology and can be carbon–neutral or -negative but is not carbon-free. Hydrogen directly reducing silicon dioxide is not thermodynamically favorable, but it may be viable to use hydrogen in conjunction with other processes to reduce emissions. Metallothermic and electrochemical methods of production are promising and have the potential to create high-purity silicon with no reduction-related carbon emissions but have only been demonstrated at lab scale. Economic viability will likely be the next determining factor for which technologies are more widely researched and implemented. Graphical Abstract

08 HYDROGEN↗
DOE OSTI2024

Dynamics of self-hybridized exciton–polaritons in 2D halide perovskites

Abstract Excitons, bound electron–hole pairs, in two-dimensional hybrid organic inorganic perovskites (2D HOIPs) are capable of forming hybrid light-matter states known as exciton-polaritons (E–Ps) when the excitonic medium is confined in an optical cavity. In the case of 2D HOIPs, they can self-hybridize into E–Ps at specific thicknesses of the HOIP crystals that form a resonant optical cavity with the excitons. However, the fundamental properties of these self-hybridized E–Ps in 2D HOIPs, including their role in ultrafast energy and/or charge transfer at interfaces, remain unclear. Here, we demonstrate that >0.5 µm thick 2D HOIP crystals on Au substrates are capable of supporting multiple-orders of self-hybridized E–P modes. These E–Ps have high Q factors (>100) and modulate the optical dispersion for the crystal to enhance sub-gap absorption and emission. Through varying excitation energy and ultrafast measurements, we also confirm energy transfer from higher energy E–Ps to lower energy E–Ps. Finally, we also demonstrate that E–Ps are capable of charge transport and transfer at interfaces. Our findings provide new insights into charge and energy transfer in E–Ps opening new opportunities towards their manipulation for polaritonic devices.

42 ENGINEERING↗
DOE OSTI2024

Resonance plasmonic coupling: selective enhancement of band edge emission over trap state emission of CdSe quantum dots

The photoluminescence properties of quantum dots (QDs) are often enhanced by eliminating surface trap states through chemical methods. Alternatively, a physical approach is presented here for improving photoluminescence purity in QDs by employing frequency-specific plasmon resonance coupling. Emitter-bound plasmonic hybrids are designed by electrostatically binding negatively charged QDs in water to positively charged gold nanoparticles having a thin polymer coating. Herein, two types of QDs are used: (i) bare CdSe, which exhibits both band edge and trap state emission, and (ii) CdSe overcoated with a ZnS shell (CdSe/ZnS) devoid of trap state emission. Tuning the extinction spectrum of the plasmonic system to match the band edge emission of CdSe enables the selective enhancement of band edge emission over trap state emission. Excellent match in the extinction spectrum of the gold nanoparticle with both, experimentally calculated photoluminescence enhancement factor and theoretically calculated radiative rate enhancement signifies the role of frequency-specific plasmon resonance coupling. Plasmon-coupled photoluminescence of CdSe/ZnS is further investigated by varying the number density of emitter on the surface of plasmonic nanoparticle. An enhancement in the photoluminescence is observed at a lower emitter density of CdSe/ZnS and the photoluminescence enhancement factor closely follows the plasmon resonance. However, photoluminescence quenching occurs with an increase in CdSe/ZnS due to plasmon-assisted nonradiative energy transfer between nearby QDs, as indicated by a red shift in the PL maximum. These studies establish that resonance plasmonic coupling is a convenient physical strategy for tuning the intrinsic photoluminescence properties of QDs for various optoelectronic applications.

Paul, Livin↗
DOE OSTI2022

Microgap breakdown with floating metal rod perturbations

Here, we report the characterization of microgap breakdown with perturbations from a metal rod floating between anode and cathode electrodes. The effects of the metal rod on the electric field distribution and the field enhancement factor are evaluated by numerical simulation and the conformal mapping method, and they indicate that the field emission regime is not reached. The breakdown voltages in the Townsend discharge regime are determined based on the voltage–current characteristics, which are obtained from two-dimensional fluid simulations. It is found that the breakdown characteristics can be significantly modulated by the floating metal rod, and the breakdown curve (breakdown voltage vs the net gap distance) is no longer U-shaped, which deviates from the conventional Paschen's law. The underlying physical mechanisms are related to the electric field enhancement, curved breakdown path, and nonuniform ion flux caused by the electric shielding effect. The results provide insights into breakdown characteristics in microscale discharges, which may promote conventional investigation of simplified clean gaps toward more complex conditions (e.g., with floating microparticles) in miniaturized plasma devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Liquid Salt Combined-Cycle Pilot Plant Design

The work described in this report is responsive to the Office of Fossil Energy program ‘Energy Storage for Fossil Power Generation.’ This Phase I report has been prepared by Pintail Power LLC, with support from Nexant ECA, Electric Power Research Institute (EPRI) and Southern Company Services as a deliverable for the U.S. Department of Energy for NETL Award DE-FE-00320016. The Liquid Salt Combined Cycle™ (LSCC™) technology provides large-scale energy storage integrated with Fossil Electric Generating Units (FEGUs) to meet critical needs in the energy transition by providing: • the lowest cost large-scale storage for time-shifting of renewable energy, • superior fuel efficiency to reduce GHGs from dispatchable resources, • flexible capacity and ramping to balance variability of wind and solar resources, • essential grid stability services to assure reliability of a low-carbon grid. The LSCC approach: • employs equipment that has already been proven in utility service, • uses safe, non-toxic, non-degrading, perpetual-life storage medium, • leverages and repurposes existing FEGU assets, • expands the value stack of energy storage to reduce market, financing, and commodity risks. Pintail Power has developed the LSCC technology to meet the need for reliable, efficient, and cost-effective integration of Variable Renewable Energy (VRE) into a low-carbon electric grid by coupling proven thermal energy storage with proven gas turbines, steam turbines, and heat transfer equipment. This novel approach is intended to address the key issues facing the grid and operators of renewable and fossil generating units including: • Overgeneration and curtailment of renewables, • Need for fast ramping dispatchable resources, • Improved efficiency and flexibility of fossil units, • Additional peaking capacity to support electrification of transportation and heating, • Provision of reliability services to support high penetration of VRE, especially synchronous inertia and fast frequency response. A Technology Readiness assessment by EPRI confirmed that LSCC technology consists of commercially proven hardware used in industrial and utility applications. Although the novel LSCC approach has not yet been demonstrated as a complete system, interfaces between major components have been conservatively specified. A Phase III pilot is planned to demonstrate equipment integration and operation. The patented innovation is removal of the evaporator section from the exhaust heat recovery system, with the evaporation performed by stored energy in a separate steam generator. This arrangement couples renewable and fossil power generation via long-duration energy storage to deliver cost, performance, and operational synergies, including superior charging and discharging flexibility, reduced fuel consumption and lower CO 2 emissions compared to conventional Combined Cycle Power Plants, and low-cost, large-scale energy storage. The LSCC technology is composed of proven equipment integrated with gas turbine exhaust heat in a novel system. During charging, electric heaters raise the salt temperature as it flows from the Cold Salt Tank to the Hot Salt Tank. During discharging, hot salt produces steam from feedwater that is heated with gas turbine exhaust, which also superheats steam to drive a steam turbine. LSCC technology can be added to any combustion-turbine to integrate renewable energy, provide needed grid services, and increase the value of fossil electric generating units based on the technology’s following attributes: • Long-duration storage enables time-shifting of VRE to avoid curtailment and impairment of renewable assets. • Long storage duration combined with fast-charging capability increases arbitrage opportunities by storing more energy when the price is low and discharging more hours when the price is high. • Long storage duration allows resource adequacy to be supplied across multiple days to increase reliability and reduce risk. • The stored energy reduces fuel heat rate and GHG emissions, and increases merit, so the LSCC dispatches earlier and longer to increase the plant’s capacity factor and asset value. • The stored energy enables pre-heating and startup of the steam cycle, without operating the gas turbine, to enable fast startup and ramping when dispatched for discharge. • The steam turbine can operate without the gas turbine so it can provide valuable synchronous inertia during charging without consuming fuel. • Fast frequency response and regulation services can be provided during charging using solid-state heater and pump controls to vary the charge power input in response to grid signals. • The LSCC system can be configured for resilience including black start, islanded/micro-grid operation, and even self-recharging of storage using either gas turbine power or gas turbine exhaust heat. The commercialization plan is to add LSCC technology to existing simple cycle gas turbine power plants with the 50MW GE LM6000 aero-derivative gas turbine as the reference design basis. A Techno-economic assessment of the reference design evaluated the benefits (Levelized Avoided Cost of Energy) and costs (Levelized Cost of Energy). The plant definition included all major systems and budgetary vendor quotes. Pintail Power and NexantECA developed the overall cost estimate for the LSCC plant up to the total plant cost level, following the DOE-NETL cost estimate guidelines at AACE Class 3 (-20%/+30%). This includes the equipment cost, bulk material, direct and indirect labor costs to arrive at the bare erected cost. Engineering costs are factored from the BEC and added to it to arrive at the EPC cost. Process and project contingencies were then factored from the EPC cost and rolled-up to yield the total plant cost of $\$$184 million for 1746 MWh of discharge electricity. • At $\$$105/kWh, the reference plant costs less than any of the Energy Storage Systems evaluated by PNNL in 2020 for the Energy Storage Grand Challenge. Operations and Maintenance cost estimates were scaled from combined cycle practice, assuming that the LSCC unit was co-located with and sharing some labor expense with other units, to arrive at $\$$2.2 million per year. Plant economics were evaluated using prices from the ERCOT Day-Ahead Market for calendar year 2019 (excluding the market disruptions from the COVID pandemic and the February 2020 deep freeze event). Assuming economic dispatch in the ERCOT Day-Ahead market, the reference plant capacity factor would have discharged for 2777 hours at 91.9 MW, a 31.66% capacity factor, with a marginal cost of $\$$25.59/MWh, and a LACE of $\$$82.41/MWh. Fixed charges were calculated according to EIA guidelines to arrive at an LCOE of $\$$83.48. The benefit-to-cost ratio of 0.99 suggests that the reference plant would have been cost-effective and competitive in the market. EPRI interviewed selected utilities to gauge the need for, applicability of and interest in the LSCC system. Several utilities are currently managing increased load growth along with the inclusion of increasing levels of renewable generation, putting pressure on conventional generation by requiring increased turndown requirements and ultimately lower capacity factors. All of the utilities interviewed have CO 2 reduction targets in the 2030-2050 timeframe that will severely limit the participation of fossil generation and require better utilization of carbon free generation. While there is limited opportunity for storage in the current markets, the utilities interviewed stated that there will be a substantial need for long duration energy storage in the future given the expected trends. Utilizing an energy storage system will generally be preferred over new gas capacity in some cases, with the capabilities of the LSCC system being a potential option for retrofit to existing simple cycle gas turbine units, allowing them to deliver greater participation in the market with lower carbon intensity. A technology gap assessment and technology maturation plan identified a pilot-scale demonstration as the final step before commercialization. Key gaps to be addressed during the Phase II FEED (Front-End Engineering Design) are component selection and design, commissioning procedures, and operational procedures and the control system for LSCC charging and discharging. The project team has been expanded to include Wood Group PLC as EPC. The proposed Phase II work leads to a pilot-scale engineering demonstration (TRL 6) to be conducted at Southern Company’s Plant Rowan, where the prototype system will perform “all the functions that will be required of the operational system.” The proposed pilot will facilitate commercialization (TRL-9) by scale-up to utility-scale systems integrated with peaking GTs or directly to facility scale systems using industrial GTs. The conceptual design for the pilot plant focuses on the novel integration aspects of LSCC technology. A slipstream of gas turbine exhaust will feed a waste heat recovery unit coupled to a molten salt steam generator heated by stored energy. The pilot is intended to demonstrate all key operating modes of the LSCC technology during charging, discharging and standby. The pilot equipment will be approximately one-seventh scale of the LM6000 commercial target and is expected to have commercial off-ramp potential for facility-scale applications.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2022

A Hydro-based MCMC Analysis of SNR 0509–67.5: Revealing the Explosion Properties from Fluid Discontinuities Alone

Using Hubble Space Telescope/ACS Hα images of SNR 0509–67.5 taken ~10 yr apart, we measure the forward shock (FS) proper motions (PMs) at 231 rim locations. The average shock radius and velocity are 3.66 ± 0.036 pc and 6315 ± 310 km s –1 . Hydrodynamic simulations, recast as similarity solutions, provide models for the supernova remnant’s expansion into a uniform ambient medium. These are coupled to a Markov chain Monte Carlo (MCMC) analysis to determine explosion parameters, constrained by the FS measurements. For our baseline model, the MCMC posteriors yield an age of 315.5 ± 1.8 yr, a dynamical explosion center at 5 h 09 m 31. s 16, $-67^\circ 31^{\prime} 17\buildrel{\prime\prime}\over{.} 1$ and ambient medium densities at each azimuth ranging over 3.7–8.0 × 10 –25 g cm –3 . The age uncertainty can be an order of magnitude larger when considering other models, or subsets of the data. We detect stellar PMs corresponding to speeds in the Large Magellanic Cloud ≥ 770 km s –1 . Five stars in the remnant show measurable PMs but none are moving radially from the dynamical center. There are four stars 1."4 from the center, including three faint, previously unidentified ones. Using coronal [Fe XIV ] λ5303 emission as a proxy for the reverse shock location, we constrain the explosion energy (for a compression factor of 4) to a value of E = (1.30 ± 0.41) × 10 51 erg for the first time from shock kinematics alone. Higher compression factors (7 or more) are strongly disfavored based on multiple criteria, arguing for inefficient particle acceleration in the Balmer shocks of SNR 0509–67.5.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1971

Mariner 7 ultraviolet spectrometer experiment - Photometric function and roughness of Mars' polar cap surface.

Review of some of the results of the Mariner 7 ultraviolet spectrometer observations of the south polar cap of Mars. The near ultraviolet polar spectrum shows the predominance of surface reflection over atmospheric scattering. The intensity of the reflected radiation decreased steeply for a change in solar elevation of only about 10 deg. Neither a haze layer nor ground inhomogeneity is considered a likely explanation for this observation. An unusual photometric function of the surface is more probable. An analysis of reflected radiation intensity as a function of incidence and emission angles was made, assuming a photometric function for the surface. The angular inversion revealed a 'smoothness factor' suggestive of an icy or glazed surface. A hypothesis is advanced to explain the observed phenomena and associated polar features.

Pang, K.↗
NASA NTRS1977

Room-temperature-operation visible-emission semiconductor diode lasers

There were two main approaches taken to develop shorter wavelength lasers. (1) Based on (AlGa)As and liquid-phase epitaxy, significant new results were obtained: Properties of these laser diodes (power output, spectra, and beam patterns), materials considerations, laser theory, and growth problems are discussed. The design of (AlGa)As layers is discussed from the vertical point of view, and various design curves are given. Horizontal structural requirements are also discussed. Experimental results from measurements done as a function of hydrostatic pressure are correlated with other results. (2) The first heterojunction laser structures using GaAs sub l-x P sub x and In sub y Ga sub l-y P at compositions, where the lattice constants are matched, were grown using vapor-phase growth technology and are described in detail, including experimental device results. Threshold current densities from 3,000 to 5,000 A per sq cm. and emission wavelengths from 6,520 A to 6,640 A were obtained at 77 K. The limiting factor in these devices is nonradiative recombination at the heterojunctions. Life tests on facet-coated (AlGa)As CW diodes are reported.

Ladany, I.↗
NASA NTRS1979

EUV limb spectra of a surge observed from Skylab

The EUV spectra of a surge observed at plus 8 in. and plus 20 in. above the white light limb from Skylab are examined. The shape of the differential emission measure determined at 8 in. and 20 in. is nearly the same as for a quiet Sun spectrum at 8 in., but the emission measure of the surge at 8 in. is about an order of magnitude greater than for the quiet Sun. At 20 in. the emission measure of the surge is initially close to the quiet Sun distribution, but decreases by a factor of 4 within 6 min. The optically thin lines formed near 10 to the 5th power K show nonthermal broadening at 8 in., and electron densities near this temperature are derived from intersystem to resonance ratios. The volume of the emitting plasma at 8 in. above the limb was determined, concluding that a continuous energy input is required to explain the observations.

Doschek, G. A.↗
NASA NTRS1979

High energy X-ray observations of Sco-like sources with Ariel V

Results are reported for observations of Sco X-1 and the similar sources 4U 1702-36 (GX 349+2, Sco X-2), 4U 1813-14 (GX 17+2), and 4U 1758-25 (GX 5-1) by several of the X-ray telescopes aboard the Ariel 5 satellite over the energy range from 2 to approximately 100 keV. The results confirm the existence of a high-energy tail in the spectrum of Sco X-1, demonstrate that 4U 1702-36 has a similar spectrum, and provide evidence for a variation of the 26-56-keV flux from 4U 1702-36 by more than a factor of four with no related change in the 2.9-7.6-keV flux. The high-energy emission from Sco X-1 is found to be one to two orders of magnitude above the extrapolated low-energy emission. Observed X-ray, radio, and optical properties of these four sources, as well as two additional Sco-like sources, are summarized.

Greenhill, J. G.↗
NASA NTRS1984

Observations of the high latitude far ultraviolet background in the 1040-1080 A band

Observations of the far ultraviolet background at high galactic latitudes in a band from 1040-1080 A were carried out with a rocket-borne 1 meter telescope and a 0.23 square degree field of view photometer. The photometer had a sharp cutoff shortward of 1040 A and a sensitivity at hydrogen Lyman alpha of a factor of 0.0001 below its sensitivity at 1060 A. A second photometer monitored geocoronal hydrogen Lyman alpha emission enabling an accurate evaluation of counts due to this background. The hydrogen Lyman alpha flux contributed only 17 percent of the total counts detected in the cosmic background detector. An upper limit to the emission in the 1040-1080 A band of 9700 photons per sq cm-s-sr-A is obtained. This upper limit is compared with previous measurements and theoretical predictions.

Bixler, J.↗
NASA NTRS1986

Thermal infrared opacity of the Mars atmosphere

An analytical technique is presented for the deriving Mars atmosphere opacity from data furnished by the IR Thermal Mapper (IRTM) instruments on the Viking landers. Each IRTM features four telescopes for viewing Mars in six spectral bands and seven spatial fields of view. The present study focuses on 20 microns measurements of the thermal inertia, 0.3-3.0 microns data for the surface albedo, and, finally, the 7, 9, and 15 microns data for the actual opacity derivations. The model takes into account the atmospheric temperature profile, scattering by dust, the surface emissivity and the variation of the surface/atmosphere temperature discontinuity. Analyses are carried out of the possible error factors and the model is used to generate opacity histories for the two Viking Lander sites. The results, when compared with other astronomical data, indicate that the method is sufficiently accurate to use opacity data to analyze the processes of storm genesis and to study local storms.

Martin, T. Z.↗
NASA NTRS1986

Variability of Markarian 1018 - Seyfert 1.9 to Seyfert 1

Simultaneous IUE and optical spectrophotometry of the Seyfert 1.9 galaxy Markarian 1018 is presented. The strength of H-beta(broad) has increased by a factor of 6.6 in 4 yr, and the galaxy now shows strong broad UV and optical line emission similar to that seen in normal Seyfert 1 galaxies, but with markedly asymmetric line profiles. As in other variable Seyfert galaxies, H-alpha emission has also increased but by a lesser amount than H-beta. Furthermore, Ly-alpha (not observed during the first epoch) is now quite strong relative to H-beta and H-alpha. Inspection of the line profiles reveals nearly identical blue asymmetric line profiles in all permitted lines; these show evidence of significant profile evolution over a 1 yr time scale. The present line ratios and the nature of their variability suggest that the enhancement in the broad-line emission is not caused by the removal of obscuring dust but by the 'lighting up' of the broad-line region.

Cohen, Ross D.↗