Search NASA⌕ Search

SEARCH · Search NASA

Results for “high modulus”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Asymmetric Cracking in Mar-M247 Alloy Builds During Electron Beam Powder Bed Fusion Additive Manufacturing

In the electron beam powder bed fusion (EB-PBF) process, a substantial number of high-gamma prime Ni-based superalloys are considered as non-printable due to a high propensity to form cracks. In this research, we focused on computational modeling framework to predict solidification-related cracking phenomena in EB-PBF processes. The cracking analysis was performed on cylindrical overhang structures where the cracks are observed only on one side of the part. Comprehensive microstructural characterization correlated the cracking tendency to low-melting point liquid-film formation along columnar grain boundaries with high misorientation angles due to partitioning of alloying elements. Uncoupled numerical thermal and mechanical models were used to rationalize the relationship between process parameters, build geometry, and cracking. The simulations showed asymmetric temperature distributions and associated asymmetric tensile thermal stresses over a cross section due to differences in section modulus and periodic changes in beam scanning directions. Here, the results provide a potential pathway based on spatially varying beam scanning strategies to reduce the cracking tendency during additive manufacturing of complex geometries on the overhang structure in high-gamma prime nickel-based superalloys.

36 MATERIALS SCIENCE↗

High-performance molded composites using additively manufactured preforms with controlled fiber and pore morphology

Here, large-scale multimaterial preforms produced by additive manufacturing (AM) underwent compression molding (CM) to produce high-performance thermoplastic composites reinforced with short carbon fibers. AM and CM techniques were integrated to control the fiber orientation (microstructure) and to reduce void content for the improved mechanical performance of the composite. The new integrated manufacturing technique is termed “additive manufacturing-compression molding” (AM-CM). For the present study, the most common materials were used for large-scale printing, i.e., acrylonitrile butadiene styrene (ABS), carbon fiber (CF)–filled ABS (CF/ABS) and glass fiber (GF)–filled ABS (GF/ABS). Three different manufacturing processes; (a) AM (b) extrusion compression molding (ECM), and (c) AM-CM were used to prepare four different panel configurations: (1) neat ABS, (2) CF/ABS, (3) overmold (CF/ABS over neat ABS), and (4) sandwich (neat ABS between two CF/ABS layers). The mechanical properties (tensile and flexural strength and modulus, and Izod impact energy) of samples prepared via all three manufacturing processes were compared. X-ray microcomputer tomography was employed to evaluate the fiber orientation distribution and the volumetric porosity content. The preform maintained high fiber alignment (≈ 82% of fibers within the range of 0–20° in the deposition direction), and the volumetric porosity was reduced by 50% from 3.79% to 1.91% after compression. The alignment of long pores along the deposition direction was also observed. The mechanical properties are discussed with correlation to the fiber alignment and void content in the samples. CF/ABS samples prepared by AM-CM showed significant improvement of 11.15%, 35.27%, 28.6%, and 74.3% in the tensile strength, tensile modulus, flexural strength, and flexural modulus, respectively, when compared with samples prepared by ECM. Unique aspects of this study are the demonstration of large-scale multimaterial AM and the use of multimaterials as preforms to make high-performance composites.

36 MATERIALS SCIENCE↗

Highly stretchable polymer semiconductor films through the nanoconfinement effect

Soft and conformable wearable electronics require stretchable semiconductors, but existing ones typically sacrifice charge transport mobility to achieve stretchability. We explore a concept based on the nanoconfinement of polymers to substantially improve the stretchability of polymer semiconductors, without affecting charge transport mobility. The increased polymer chain dynamics under nanoconfinement significantly reduces the modulus of the conjugated polymer and largely delays the onset of crack formation under strain. As a result, our fabricated semiconducting film can be stretched up to 100% strain without affecting mobility, retaining values comparable to that of amorphous silicon. The fully stretchable transistors exhibit high biaxial stretchability with minimal change in on current even when poked with a sharp object. Lastly, we demonstrate a skinlike finger-wearable driver for a light-emitting diode.

36 MATERIALS SCIENCE↗

Effect of vanadium oxide addition on thermomechanical behaviors of borosilicate glasses: Toward development of high crack resistant glasses for nuclear waste disposal

The effect of of V2O5 additions (up to 8 mol%) on the physical properties (e.g., density, glass transition temperature and refractive indices) and mechanical behaviors (e.g., hardness, fracture toughness, elastic modulus) of a soda-lime borosilicate glass with a composition of 60.2SiO(2)-16.0B(2)O(3)-12.6Na(2)O-3.8Al(2)O(3)-5.7CaO-1.7ZrO(2) (mol%) have been investigated systematically. It was found that introducing V2O5 decreases the glass transition temperature and hardness while increases the refractive index and crack initiation load. Composition-property relationships, especially on mechanical properties, were examined in order to provide insights for the development of new glass materials with outstanding mechanical properties. The results show that V2O5 can be a glass component for engineering and insuring high crack resistant glasses and glasses with long-term stability. Additionally, elastic properties as a function of temperature were studied using Brillouin light scattering and temperature-independent elastic moduli behaviors were observed.

Lu, Xiaonan↗

ASSESSMENT OF HIGH-VOLUME HARVESTED FLY ASH BLENDS FOR USE IN PRECAST CONSTRUCTION

Declining supplies of fresh fly ashes in some regions have further driven the importance of using harvested fly ash as a supplementary cementitious material and thus replacement for more energy-intensive ordinary Portland cement (OPC). Higher replacement rates of OPC with fly ash in general has traditionally been limited in precast operations due to stringent early-age strength requirements necessitated by initial prestress and lifting/handling of hardened components – often well within 24 hours after fresh concrete placement. Therefore, a series of mix designs were developed, as part of a larger framework for reassessing high-volume fly ash (HVFA) use in the context of precast construction, to demonstrate the feasibility of using larger fractions of harvested fly ash in concrete formulations suitable for precast fabrication demands. More specifically, a target minimum 24-hour compressive strength of 24.1 MPa (3500 psi) was set, in accordance with conventional precast structural design checks, while increasing the fly ash content to 40% replacement of OPC – at least a 15% increase above the traditional limit of 25%. The effect of using more sustainable Type IL cement in contrast to conventional Type III Portland cement (the traditional standard for precast use) – both in conjunction with HVFA use – was also examined. Early-age mechanical properties including compressive strength, modulus of rupture, and modulus of elasticity were evaluated within the aforementioned early-age window. Lastly, corresponding design equations were then reassessed for their applicability with respect to the high-early strength HVFA mixes examined herein.

Gombeda, Matthew J.↗

Rate dependent response and failure of a ductile epoxy and carbon fiber reinforced epoxy composite

An extensive characterization suite has been performed on the response and failure of a ductile epoxy 55A and uniaxial carbon fiber reinforced epoxy composite of IM7 fibers in 55A resin from the quasistatic to shock regime. The quasistatic and intermediate strain rate response, including elastic modulus, yield and failure have are characterized by quasistatic, SHPB, and DMA measurements as a function of fiber orientation and temperature. The high strain rate shock effect of fiber orientation in the composite and response of the pure resin are presented for plate impact experiments. It has previously been shown that at lower impact velocities the shock velocity is strongly dependent on fiber orientation but at higher impact velocity the in-plane and through thickness Hugoniots converge. The current results are compared with previous studies of the shock response of carbon fiber composites with more conventional brittle epoxy matrices. The spall response of the composite is measured and compared with quasistatic fracture toughness measurements.

36 MATERIALS SCIENCE↗

Assessment and Response of Treated Cocos nucifera Reinforced Toughened Epoxy Composite Towards Fracture and Viscoelastic Properties

The current research work is dedicated to addressing the fibre orientation problem and environmental issues through the development of micron-sized coir particle reinforced epoxy composite with enhanced fracture toughness and viscoelastic properties. A ‘specific grade’ standard epoxy adhesive based polymer composite is produced with reinforcement of surface modified coir particle filler. The surface modification on raw coir filler is carried out by NaOH and confirmed by Fourier transform infrared spectroscopy (FTIR), X-ray diffractogram and thermogravimetric analysis (TGA). The reduced intensity of hydroxide functional group as well as the enhanced thermal stability of surface modified coir filler is observed by FTIR and TGA respectively. The properties of produced composite samples are investigated by tensile test with low to high strain rate, fracture toughness test and dynamic mechanical analysis. The investigation revealed an improvement in tensile strength, fracture toughness and storage modulus values of toughened coir–epoxy composite with filler loading. The maximum value of ultimate tensile strength, modulus of elasticity and fracture toughness were 27.58 MPa, 0.738 GPa and 1.792 MPa m{sup 1/2}. The constraints like strain rate and filler content demarcated some critical effects on tensile strength, Young’s modulus and modulus of rupture. The research work suggests the applicability of the developed material as household items, replacement of timber product for indoor and outdoor decorations.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of lattice anharmonicity in the structural phase transformation of Laves phase HfV2 alloy: A first-principles investigation

First-principles theory was developed to study the structural phase transformations in the Laves phase HfV2 alloy. We explored the energy landscape and established the role of lattice anharmonicity underlying the structural phase transitions. Our approach is based on a phenomenological Landau theory for the structural phase transition and a mean-field approximation for the free energy. First-principles calculations were utilized to obtain the distortion energy as a function of relevant deformations, and to deduce parameters for constructing the free energy. Our result for the phase transition temperature of HfV2 is in good agreement with experiment. We find that the high-temperature cubic C15 phase is stabilized by the effect of lattice anharmonicity. The theory also predicts an anomalous increase in shear modulus with increasing temperature for systems where the anharmonicity is pronounced.

Krcmar, Maja↗

Mechanically and thermally robust microporous copolymer separators for lithium ion batteries

Next generation, multifunctional separators can enhance energy storage, power, and safety performance of lithium ion batteries but must be simple to fabricate and incorporate with existing roll-to-roll manufacturing. Here, this study presents a strategy to facilely prepare these separators using UV-initiated polymerization-induced phase separation (PIPS), wherein microporous polymer separators are fabricated directly from constituent monomers and ethylene carbonate (EC) porogen. This enables a wide compositional design space as co-monomers with specific chemical functionality can be readily incorporated into the PIPS precursor mixture. Herein, 1,4-butanediol diacrylate (BDDA) was copolymerized with poly(ethylene glycol) diacrylate (PEGDA) to increase the acrylate conversion in the photopolymerization and improve mechanical properties. By tuning the ratio of PEGDA and EC, separators with high porosity (41.3%) and effective ionic conductivity (2.09 mS cm –1 ) were prepared. Inclusion of PEGDA was essential to increasing the elastic modulus to > 345 MPa, which is required for cell assembly by roll-to-roll manufacturing. All separators prepared were shown to enable reversible cycling of lithium metal/LiNi 0.5 Mn 0.3 Co 0.2 O 2 half-cells for 100 cycles. Unlike conventional polyolefin separators, which were shown to melt at 160 °C and shrink by up to 29.8% at elevated temperatures, the PIPS separators possess exceptional, safety-enhancing thermomechanical properties, undergoing no phase transitions or thermal shrinkage.

25 ENERGY STORAGE↗

Probing the Damage Zone at Parkfield

Rocks are heterogeneous materials that exhibit nonlinear elastic (anelastic) behavior at scales ranging from the laboratory to Earth. In the laboratory, typical, complex relationships exist between stress and strain that include hysteresis, finite relaxation times, strain rate, and history dependence. These behaviors are linked to important characteristics such as stress, porosity, permeability, material integrity, and material failure. In this work, we adopted a “pump-probe” type experiment common in laboratory studies, using solid earth tides as the low-frequency pump and empirical Green's function as the high-frequency probe. By probing the velocity at different points in the pump cycle, we constrained important information about the strain-modulus relationship. Near the San Andreas Fault, we observed strongly nonlinear elastic behavior that characterizes the damage zone. We also constrained important aspects of hysteretic behavior that are related to damage properties and possibly pore pressure. Away from the fault, the nonlinear behavior is diminished.

58 GEOSCIENCES↗

High‐Pressure and High‐Temperature Single‐Crystal Elasticity of Cr‐Pyrope: Implications for the Density and Seismic Velocity of Subcontinental Lithospheric Mantle

Abstract Single‐crystal X‐ray diffraction and Brillouin spectroscopy experiments were performed on a natural Cr‐pyrope (Prp 71.0 Alm 12.6 Sps 0.7 Grs 3.5 Uvr 12.2 ) at high pressure and high temperature up to 11.0 GPa and 800 K. Fitting the collected data to the third‐order finite strain equation yields bulk modulus ( K S 0 ), shear modulus ( G 0 ), their pressure ((∂ K S /∂ P ) T and (∂ G /∂ P ) T ) and temperature (( ∂K S /∂T ) P and ( ∂G/∂T ) P ) derivatives, K S 0 = 167.7(8) GPa, G 0 = 91.5(5) GPa, (∂ K S /∂ P ) T = 4.3(1), (∂ G /∂ P ) T = 1.4(1), ( ∂K S /∂T ) P = − 0.0175(1) GPa/K and ( ∂G/∂T ) P = − 0.0073(1) GPa/K. Using the obtained results, we examined whether the elastic properties of the Cr‐pyrope can be accurately calculated from those of endmembers including pyrope, almandine, grossular, and uvarovite assuming a linear relationship between elastic properties and composition (end‐member model). The results indicate that the end‐member model provides a sufficient approximation for the elastic properties of Cr‐pyrope in calculating the density and velocity of the subcontinental lithospheric mantle (SCLM). We modeled the densities and velocities of three typical types of SCLM (Archon, Proton, and Tecton) in order to investigate how the variation of chemical composition influences the SCLM. We obtained that the compositional change from the Archon to the Tecton increases the density of the SCLM significantly, which can be an important prerequisite for SCLM delamination. However, the compositional variation only slightly changes the velocity of the SCLM and the change is within the uncertainty of the calculation. Moreover, in comparison to the velocity, ρ / V P and ρ / V S are much more sensitive to the compositional change of the SCLM.

Xu, Jingui↗

Structural and electronic properties of thallium compounds

The tight binding linear muffin-tin-orbital (TB-LMTO) method within the local density approximation (LDA has been used to calculate structural and electronic properties of thallium pnictides TlX (X=Sb, Bi) at high pressure. As a function of volume, the total energy is evaluated. Apart from this, the lattice parameter (a{sub 0}), bulk modulus (B{sub 0}), band structure (BS) and density of states (DOS) are calculated. From energy band diagram we observed metallic behaviour in TlSb and TlBi compounds. The values of equilibrium lattice constants and bulk modulus are agreed well with the available data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Simulated Space Environment Effects on a Candidate Solar Sail Material

For long duration missions of solar sails, the sail material needs to survive harsh space environments and the degradation of the sail material controls operational lifetime. Therefore, understanding the effects of the space environment on the sail membrane is essential for mission success. In this study, we investigated the effect of simulated space environment effects of ionizing radiation, thermal aging and simulated potential damage on mechanical, thermal and optical properties of a commercial off the shelf (COTS) polyester solar sail membrane to assess the degradation mechanisms on a feasible solar sail. The solar sail membrane was exposed to high energy electrons (about 70 keV and 10 nA/cm2), and the physical properties were characterized. After about 8.3 Grad dose, the tensile modulus, tensile strength and failure strain of the sail membrane decreased by about 20 ~ 95%. The aluminum reflective layer was damaged and partially delaminated but it did not show any significant change in solar absorbance or thermal emittance. The effect on mechanical properties of a pre-cracked sample, simulating potential impact damage of the sail membrane, as well as thermal aging effects on metallized PEN (polyethylene naphthalate) film will be discussed.

Kang, Jin Ho↗

An Investigation of the Structural Phase Transition of Ammonia Borane

A detailed anelastic spectroscopy study of the structural phase transition of ammonia borane was conducted for the first time. The transformation from the tetragonal high temperature phase into the orthorhombic low temperature one is detected on cooling around 220K by a huge drop of the elastic modulus and a spike of the elastic energy dissipation.We find clear indications of a hysteresis, which led us to conclude that the transition is of first-order. The kinetics of the transitionwas investigated in detail. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy.

36 MATERIALS SCIENCE↗

High-Strength, Superelastic Compounds

In a previous disclosure, the use of 60- NiTiNOL, an ordered intermetallic compound composed of 60 weight percent nickel and 40 weight percent titanium, was investigated as a material for advanced aerospace bearings due to its unique combination of physical properties. Lessons learned during the development of applications for this material have led to the discovery that, with the addition of a ternary element, the resulting material can be thermally processed at a lower temperature to attain the same desirable hardness level as the original material. Processing at a lower temperature is beneficial, not only because it reduces processing costs from energy consumption, but because it also significantly reduces the possibility of quench cracking and thermal distortion, which have been problematic with the original material. A family of ternary substitutions has been identified, including Hf and Zr in various atomic percentages with varying concentrations of Ni and Ti. In the present innovation, a ternary intermetallic compound consisting of 57.6 weight percent Ni, 39.2 weight percent Ti, and 3.2 weight percent Hf (54Ni-45Ti-1Hf atomic percent) was prepared by casting. In this material, Hf substitutes for some of the Ti atoms in the material. In an alternate embodiment of the innovation, Zr, which is close in chemical behavior to Hf, is used as the substitutional element. With either substitution, the solvus temperature of the material is reduced, and lower temperatures can be used to obtain the necessary hardness values. The advantages of this innovation include the ability to solution-treat the material at a lower temperature and still achieve the required hardness for bearings (at least 50 Rockwell C) and superelastic behavior with recoverable strains greater than 2%. Most structural alloys will not return to their original shape after being deformed as little as 0.2% (a tenth of that possible with superelastic materials like 60 NiTiNOL). Because lower temperatures can be used in the heat treatment process, less energy will be consumed, and there will be less dimensional distortion and quench cracking. This results in fewer scrap parts, less material waste from large amounts of material removal, and fewer machining steps to rework parts that are out of specification. This material has a combination of properties that have been previously unobtainable. The material has a Young s modulus of approximately 95 GPa (about half that of conventional steels), moderate density (10 to 15% lower than conventional steels), excellent corrosion resistance, and high hardness (58 to 62 HRC). These properties make this material uniquely suited for advanced bearings.

Stanford, Malcolm↗

Equations of State and Anisotropy of Fe-Ni-Si Alloys

We present powder X–ray diffraction data on body centered cubic (bcc)– and hexagonal close packed (hcp)–structured Fe 0.91 Ni 0.09 and Fe 0.8 Ni 0.1 Si 0.1 at 300 K up to 167 and 175 GPa, respectively. The alloys were loaded with tungsten powder as a pressure calibrant and helium as a pressure transmitting medium into diamond anvil cells, and their equations of state and axial ratios were measured with high statistical quality. These equations of state are combined with thermal parameters from previous reports to improve the extrapolation of the density, adiabatic bulk modulus, and bulk sound speed to the pressures and temperatures of Earth's inner core. We propagate uncertainties and place constraints on the composition of Earth's inner core by combining these results with available data on light–element alloys of iron and seismic observations. For example, the addition of 4.3 to 5.3 wt% silicon to Fe 0.95 Ni 0.05 alone can explain geophysical observations of the inner core boundary, as can up to 7.5 wt% sulfur with negligible amounts of silicon and oxygen. Our findings favor an inner core with less than ~2 wt% oxygen and less than 1 wt% carbon, although uncertainties in electronic and anharmonic contributions to the equations of state may shift these values. The compositional space widens toward the center of the Earth, considering inner core seismic gradients. Here, we demonstrate that hcp–Fe 0.91 Ni 0.09 and hcp–Fe 0.8 Ni 0.1 Si 0.1 have measurably greater c/a axial ratios than those of hcp–Fe over the measured pressure range. Here, we further investigate the relationship between the axial ratios, their pressure derivatives, and elastic anisotropy of hcp–structured materials.

36 MATERIALS SCIENCE↗