Search NASA⌕ Search

SEARCH · Search NASA

Results for “improved microstructures and properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

DE-FE0026098 Final Report - Advanced Materials and Manufacturing Processes for SOFC Power Systems Revision 1

The aim of the project is to qualify an integrated material set and processing solution for selected metallic components of an advanced integrated stack block. As the integrated stack block is the “engine” of the solid oxide fuel cell power system, the project will also support significant cost reductions, increased reliability, and improved performance of the LG Fuel Cell Systems Inc. (“LGFCS”) cell and stack technology to be included in the initial commercial product offering. In the proposed work an integrated material set, and processing solution will be developed using powder metals processing which has been proven to be an enabling technology capable of delivering net or near net shape components, as well as for creating compositions, microstructures, and properties that are otherwise unattainable. Several advanced manufacturing processes will be screened to select one or more that are most advantageous for the selected metallic components when produced at commercial volumes. This work will be accomplished through the integration of metallurgists and processing engineers from Carpenter Technology, with the product design and cost engineers from LGFCS. The expected outcome of the proposed work is an optimized material set and processing solution that will reduce the current cost.

03 NATURAL GAS↗

Assessment and Planning of HFIR Test Articles

Burnable absorbers (BAs) are introduced into nuclear fuels to aid in controlling the activity of the irradiated fuel at the beginning of life in a light water reactor (LWR). This improves the efficiency of the reactor since it allows for higher enrichments (> 5 % 235 U) to be used in a LWR, which increases the burnup limit and therefore the cycle length. The purpose of the BA is to absorb neutrons to prevent power peaking, and the concentration of BA is consumed under irradiation. In order to understand the effect of the BAs on the microstructure and thermophysical properties of the fresh and irradiated fuel, neutron irradiation tests will be carried out at the High Flux Isotope Reactor (HFIR). These tests will include Gd 2 O 3 doped UO 2 fuels with concentrations that vary from 4 to 10 weight % Gd 2 O 3 .

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Citric Acid Functionalized Natural Fibers to Enhance Thermal Stability and Moisture Resistance in Polylactic Acid Composites

Cellulosic fibers can impart many unique benefits into composite applications, such as reduced weight or structural reinforcement; however, these materials also increase hygroscopicity and decrease thermal stability, restricting broader applications. The present work adapted an experimental process for functionalizing the cellulose surface using citric acid (CA) for three fibers: a 100% cellulose bleached soft Kraft pulp (e.g., creafill) and two natural fibers with similar composition but different fiber morphology, flax fiber and banana fiber. The process uses CA with a sodium hypophosphite (SHP) catalyst to chemically functionalize fiber surfaces, and the reaction mechanism was investigated through Fourier Transform Infrared Spectroscopy (FTIR), which suggested a grafting mechanism rather than a surface-based crosslinking between neighboring sites. Functionalized fibers were compounded into polylactic acid (PLA) at 20 wt.% to better understand how this functionalization might impact critical performance properties like thermal stability, crystallization, thermal mechanical properties, and water uptake of these composites. The study demonstrated varying levels of efficacy for the functionalization of cellulosic fibers with CA/SHP and the fiber with the most open microstructure, e.g., banana fiber, exhibited the largest change in its properties with a 38% reduction in water uptake compared to untreated banana fiber composites. Parallel evaluation of the functionalization process for different fibers demonstrates the importance of fiber morphology on surface modification and can enable their use in composites by demonstrating the efficacy of this potentially low-cost, low-toxicity method for reducing hygroscopicity and improving thermal stability.

citric acid↗

An oxide dispersion strengthened Ni-W-Al alloy with superior high temperature strength

Oxide dispersion strengthened alloys based on the WAZ-20 nickel-base alloy were prepared by the mechanical alloying process described by Benjamin (1973), and evaluated. The results of microstructural examinations and mechanical property determinations are discussed. It is shown that WAZ-20, a high gamma-prime fraction alloy having a high gamma-prime solvus temperature, can be effectively dispersion strengthened. The strengths obtained were outstanding, especially at 1150 and 1205 C. The strength is attributed to a combination of highly alloyed matrix, elongated grain structure, and hard phase dispersion. Tensile ductility can be improved by post-recrystallization heat treatment. The new alloy shows some potential for low stress post-extrusion forming.

Glasgow, T. K.↗

Code Qualification of Structural Materials for AFCI Advanced Recycling Reactors

This report summarizes the further findings from the assessments of current status and future needs in code qualification and licensing of reference structural materials and new advanced alloys for advanced recycling reactors (ARRs) in support of Advanced Fuel Cycle Initiative (AFCI). The work is a combined effort between Argonne National Laboratory (ANL) and Oak Ridge National Laboratory (ORNL) with ANL as the technical lead, as part of Advanced Structural Materials Program for AFCI Reactor Campaign. The report is the second deliverable in FY08 (M505011401) under the work package 'Advanced Materials Code Qualification'. The overall objective of the Advanced Materials Code Qualification project is to evaluate key requirements for the ASME Code qualification and the Nuclear Regulatory Commission (NRC) approval of structural materials in support of the design and licensing of the ARR. Advanced materials are a critical element in the development of sodium reactor technologies. Enhanced materials performance not only improves safety margins and provides design flexibility, but also is essential for the economics of future advanced sodium reactors. Code qualification and licensing of advanced materials are prominent needs for developing and implementing advanced sodium reactor technologies. Nuclear structural component design in the U.S. must comply with the ASME Boiler and Pressure Vessel Code Section III (Rules for Construction of Nuclear Facility Components) and the NRC grants the operational license. As the ARR will operate at higher temperatures than the current light water reactors (LWRs), the design of elevated-temperature components must comply with ASME Subsection NH (Class 1 Components in Elevated Temperature Service). However, the NRC has not approved the use of Subsection NH for reactor components, and this puts additional burdens on materials qualification of the ARR. In the past licensing review for the Clinch River Breeder Reactor Project (CRBRP) and the Power Reactor Innovative Small Module (PRISM), the NRC/Advisory Committee on Reactor Safeguards (ACRS) raised numerous safety-related issues regarding elevated-temperature structural integrity criteria. Most of these issues remained unresolved today. These critical licensing reviews provide a basis for the evaluation of underlying technical issues for future advanced sodium-cooled reactors. Major materials performance issues and high temperature design methodology issues pertinent to the ARR are addressed in the report. The report is organized as follows: the ARR reference design concepts proposed by the Argonne National Laboratory and four industrial consortia were reviewed first, followed by a summary of the major code qualification and licensing issues for the ARR structural materials. The available database is presented for the ASME Code-qualified structural alloys (e.g. 304, 316 stainless steels, 2.25Cr-1Mo, and mod.9Cr-1Mo), including physical properties, tensile properties, impact properties and fracture toughness, creep, fatigue, creep-fatigue interaction, microstructural stability during long-term thermal aging, material degradation in sodium environments and effects of neutron irradiation for both base metals and weld metals. An assessment of modified versions of Type 316 SS, i.e. Type 316LN and its Japanese version, 316FR, was conducted to provide a perspective for codification of 316LN or 316FR in Subsection NH. Current status and data availability of four new advanced alloys, i.e. NF616, NF616+TMT, NF709, and HT-UPS, are also addressed to identify the R&D needs for their code qualification for ARR applications. For both conventional and new alloys, issues related to high temperature design methodology are described to address the needs for improvements for the ARR design and licensing. Assessments have shown that there are significant data gaps for the full qualification and licensing of the ARR structural materials. Development and evaluation of structural materials require a variety of experimental facilities that have been seriously degraded in the past. The availability and additional needs for the key experimental facilities are summarized at the end of the report. Detailed information covered in each Chapter is given.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Chemical bonding, optical constants, and electrical resistivity of sputter-deposited gallium oxide thin films

Gallium oxide (Ga{sub 2}O{sub 3}) thin films were made by sputter deposition employing a Ga{sub 2}O{sub 3} ceramic target for sputtering. The depositions were made over a wide range of substrate temperatures (T{sub s}), from 25 to 600 °C. The effect of T{sub s} on the chemical bonding, surface morphological characteristics, optical constants, and electrical properties of the grown films was evaluated using X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), spectroscopic ellipsometry (SE), and four-point probe measurements. XPS analyses indicate the binding energies (BE) of the Ga 2p doublet, i.e., the Ga 2p{sub 3/2} and Ga 2p{sub 1/2} peaks, are located at 1118.0 and 1145.0 eV, respectively, characterizing gallium in its highest chemical oxidation state (Ga{sup 3+}) in the grown films. The core level XPS spectra of O 1s indicate that the peak is centered at a BE ∼ 531 eV, which is also characteristic of Ga-O bonds in the Ga{sub 2}O{sub 3} phase. The granular morphology of the nanocrystalline Ga{sub 2}O{sub 3} films was evident from AFM measurements, which also indicate that the surface roughness of the films increases from 0.5 nm to 3.0 nm with increasing T{sub s}. The SE analyses indicate that the index of refraction (n) of Ga{sub 2}O{sub 3} films increases with increasing T{sub s} due to improved structural quality and packing density of the films. The n(λ) of all the Ga{sub 2}O{sub 3} films follows the Cauchy's dispersion relation. The room temperature electrical resistivity was high (∼200 Ω-cm) for amorphous Ga{sub 2}O{sub 3} films grown at T{sub s} = RT-300 °C and decreased to ∼1 Ω-cm for nanocrystalline Ga{sub 2}O{sub 3} films grown at T{sub s} ≥ 500–600 °C. A correlation between growth conditions, microstructure, optical constants, and electrical properties of Ga{sub 2}O{sub 3} films is derived.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Solidification, growth mechanisms, and associated properties of Al-Si and magnesium lightweight casting alloys

Continually rising energy prices have inspired increased interest in weight reduction in the automotive and aerospace industries, opening the door for the widespread use and development of lightweight structural materials. Chief among these materials are cast Al-Si and magnesium-based alloys. Utilization of Al-Si alloys depends on obtaining a modified fibrous microstructure in lieu of the intrinsic flake structure, a process which is incompletely understood. The local solidification conditions, mechanisms, and tensile properties associated with the flake to fiber growth mode transition in Al-Si eutectic alloys are investigated here using bridgman type gradient-zone directional solidification. Resulting microstructures are examined through quantitative image analysis of two-dimensional sections and observation of deep-etched sections showing three-dimensional microstructural features. The transition was found to occur in two stages: an initial stage dominated by in-plane plate breakup and rod formation within the plane of the plate, and a second stage where the onset of out-of-plane silicon rod growth leads to the formation of an irregular fibrous structure. Several microstructural parameters were investigated in an attempt to quantify this transition, and it was found that the particle aspect ratio is effective in objectively identifying the onset and completion velocity of the flake to fiber transition. The appearance of intricate out-of-plane silicon instability formations was investigated by adapting a perturbed-interface stability analysis to the Al-Si system. Measurements of silicon equilibrium shape particles provided an estimate of the anisotropy of the solid Si/liquid Al-Si system and incorporation of this silicon anisotropy into the model was found to improve prediction of the instability length scale. Magnesium alloys share many of the benefits of Al-Si alloys, with the added benefit of a 1/3 lower density and increased machinability. Magnesium castings often contain additions of heavier elements, such as zinc, zirconium, and rare earth elements, which significantly improve high temperature performance. However, additions of these elements can lead to macrosegregational effects in castings, which are detectable by radiographic scans. The effect of these flow-line indications on alloy mechanical properties is not well quantified. An examination of these flow-line indications and their effects on mechanical properties in three magnesium-based casting alloys was performed here in order to determine the best practice for dealing with affected castings. Preliminary results suggest the flow-lines do not measurably impact bulk material properties. Three additional methods of characterizing three-dimensional material structures are also presented: a minimum spanning tree analysis is utilized to quantify local structure in Cu-Zr liquid phase simulations obtained from molecular dynamics; the radial distribution function is applied to directionally solidified Al-Si structures in an attempt to extract local spacing data; and the critical diameter measurement is also defined and applied to irregular eutectic Al-Si structures.

36 MATERIALS SCIENCE↗

Properties and features of structure formation CuCr-contact alloys in electron beam cladding

The microstructure and properties of the contact CuCr alloy produced by electron-beam cladding have been investigated. The effect of the electron beam cladding parameters and preheating temperature of the base metal on the structure and the properties of the coatings has been determined. The bimodal structure of the cladding coating has been established. The short circuit currents tests have been carried out according to the Weil-Dobke synthetic circuit simulating procedure developed for vacuum circuit breakers (VCB) test in real electric circuits. Test results have shown that the electron beam cladding (EBC) contact material has better breaking capacity than that of commercially fabricated sintered contact material. The application of the technology of electron beam cladding for production of contact material would significantly improve specific characteristics and reliability of vacuum switching equipment.

36 MATERIALS SCIENCE↗

Radiation Tolerance and Mechanical Properties of Nanostructured Amorphous-Ceramic/Metal Composites

The objective of this work was to use a radically non-traditional approach to design amorphous-ceramic/metal composites for service in extreme irradiation environments. The project was built on a strong integration among four research teams for materials synthesis and characterization, ion irradiation, mechanical evaluation, and atomic scale modeling. Rather than try to prevent microstructure changes in polycrystalline aggregates, the research team worked to evolve composite systems where one of the constituents is intentionally synthesized in a non-crystalline or “amorphous” state. Because amorphous materials possess no translational symmetry, such alloys do not contain conventional crystal defects such as vacancies, interstitials, or dislocations. These materials offer the possibility of eliminating the root cause responsible for radiation damage in polycrystalline solids - namely the production of point defects and clusters thereof in collision cascades - and could serve as the basis for developing a new class of structural materials with unprecedented resistance to radiation. The amorphous alloys were used to develop advanced amorphous-ceramic/metal composites with greatly improved radiation tolerance and stability above 500oC, and improved mechanical performance by combining the good properties of amorphous materials (high strength and elastic limit) with those of crystalline materials (high toughness, strain hardening). The ceramic component of the composite consisted of a high crystallization temperature and radiation tolerant amorphous alloy composed of Si-O-C, silicon oxycarbide, while the metal layer was Fe and Fe(Cr), chosen to serve as model materials for steel. A prime hypothesis that drove this work is that the composite interface, together with the composite constituents, would provide significantly enhanced radiation tolerance, similar to or superior to those observed in metallic nanolayered structures, in a more engineering relevant material system. As our experimental data and modeling show, we have successfully developed a new class of ceramic/metal composites that can be adapted for engineering applications, thus significantly impacting improved materials performance for advanced nuclear reactors.

36 MATERIALS SCIENCE↗

Nanoscale calcium aluminate coated graphite for improved performance of alumina based monolithic refractory composite

Graphical abstract: - Highlights: • Sol–gel Ca-doped γ-Al{sub 2}O{sub 3} accomplished graphite retention. • Nanocoating considerably improved matrix-aggregate bonding. • Less porous simulated matrix upgraded slag resistance. - Abstract: The synthesis and properties of high alumina castable containing nanostructured calcium aluminate coated graphite were studied in terms of slag resistance and overall physical characteristics. Raman spectroscopy, BET surface area and field emission scanning electron microscopy (FESEM) were performed to exclusively understand the coating characteristics and its compatibility in refractory composite. The coating not only secured graphite in castable for prolonged period but also noticeably improved matrix to aggregate contact. The microstructural aspects of castables were investigated, with special emphasis on a representative matrix prepared and infiltrated with slag at elevated temperature. Scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) of fired composite containing surface-treated graphite was quite prospective. It circumvented the problems of incorporating as-received graphite in castables and should be in the attention of refractory researchers and producers.

36 MATERIALS SCIENCE↗

Effect of thermal annealing on the properties of transparent conductive In–Ga–Zn oxide thin films

Amorphous In–Ga–Zn oxide (IGZO) thin films were prepared using radio frequency magnetron sputtering at room temperature. Upon thermal annealing at temperatures even up to 500 °C, the amorphous characteristics were still maintained, but the electronic properties could be considerably enhanced. This could be ascribed to the increased optical band gap and the increased oxygen vacancies, as corroborated by the microstructure characterizations. In addition, the surface became smoother upon thermal annealing, guaranteeing good interface contact between electrode and a-IGZO. The optical transmittance at 400–800 nm exceeded 90% for all samples. All in all, thermal annealing at appropriate temperatures is expected to improve the performances of relevant a-IGZO thin film transistors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Creep Performance of Novel Composite Heating Elements for Reheat Furnace Electrification

The iron and steel industry is critical for the modern world but is also very energy intensive and is a low margin industry. Hot rolling requires reheating steel slabs to ~1250 °C for hot rolling and involves yield loss due to scale formation. Electrification of this process using resistive heating could improve yield but is currently not possible due to the poor creep resistance of MoSi2 heating elements, which need to be operated well below their maximum temperatures when mounted horizontally. To solve this problem, novel MoSi2 composite heating elements with SiBCN ceramic reinforcements are being developed using high energy ball milling and spark plasma sintering. The creep performance of different heating elements and their corresponding microstructures and electrical properties will be presented.

36 - MATERIALS SCIENCE↗

Phase Evolution and Mechanical Properties of AlCoCrFeNiSi{sub x} High-Entropy Alloys Synthesized by Mechanical Alloying and Spark Plasma Sintering

In the current investigation, AlCoCrFeNiSi{sub x} (x = 0, 0.3, 0.6 and 0.9 in atomic ratio) high-entropy alloy systems are prepared by mechanical alloying and subsequently consolidated by spark plasma sintering. The microstructural and mechanical properties were analyzed to understand the effect of Si addition in AlCoCrFeNi alloy. The x-ray diffraction analysis reveals the supersaturated solid solution of the body-centered cubic structure after 20 h of ball milling. However, the consolidation promotes the transformation of body-centered phases partially into the face-centered cubic structure and sigma phases. A recently proposed geometric model based on the atomic stress theory has been extended for the first time to classify single phase and multi-phases on the high-entropy alloys prepared by mechanical alloying and spark plasma sintering process. Improved microhardness and better wear resistance were achieved as the Si content increased from 0 to 0.9 in the present high-entropy alloy.

36 MATERIALS SCIENCE↗

Improved ductility of a transformation-induced-plasticity steel by nanoscale austenite lamellae

TRIP (transformation-induced-plasticity) steel with a chemical composition of 0.19C–0.30Si–1.76Mn–1.52Al (weight percentage, wt.%) have been treated by intercritical annealing and austempering process. The microstructures of the obtained samples consist of the ferrite, the bainite and the retained austenite phase. The volume fractions of the bainite and the retained austenite gradually increase with increasing the temperature of the intercritical annealing. Consequently, significantly different mechanical properties have been observed. The sample annealed at 820°C (for 120s) and partitioned at 400°C (for 300s) has the best combination of ultimate tensile strength (UTS, ~682 MPa) and elongation to failure (~70%) with about 26% of bainitic ferrite plates and 17% retained austenite in its microstructure. The retained austenite has a lamella morphology with 100–300 nm in thickness and 2–5 μm in length. On the contrary, the sample annealed at the same temperature without the partitioning process yields much lower UTS and elongation to failure.

mechanical properties↗

Summary Report of Summer Work: High Purity Single Crystal Growth & Microstructure of Ferritic-Martensitic Steels

Harnessing the power of the nuclear sciences for national security and to benefit others is one of Los Alamos National Laboratory’s missions. MST-8 focuses on manipulating and studying how the structure, processing, properties, and performance of materials interact at the atomic level under nuclear conditions. Within this group, single crystal scintillators contribute to the safety and reliability of weapons, provide global security safeguards, and build on scientific principles that carry over to medical fields for cancer detection. Improved cladding materials made of ferritic-martensitic alloys support the mission of DOE-NE’s Fuel Cycle Research and Development program to close the nuclear fuel cycle, aiming to solve nuclear waste management challenges and thereby increase the performance and safety of current and future reactors.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Influence of Thermomechanical Treatment on Structural-Phase Transformations and Mechanical Properties of the Cu–Al–Ni Shape-Memory Alloys

Using the methods of optical and electron microscopy and electron and X-ray diffraction analyses, the influence of thermomechanical treatment on the mechanical properties, average grain size, and structural and phase transformations is investigated in the Cu–Al–Ni triple alloys exhibiting a shape memory effect. In the alloys under study with a fixed content of 3wt% Ni the concentration of aluminum was varied from 9 to 14 wt%. It is shown that in the alloys subjected to thermal treatment, including forging and homogenizing annealing using controlled recrystallization in the austenitic state followed by quenching, the grain-boundary disintegration and segregation disappear. It is found out that the microstructure of the alloys in the hot-forged and hardened states with the content of aluminum 9–10 wt%. consists of the grains of the average dimensions within 60–80 μm, with the content of aluminum 10–12 wt% – 100–350 μm, while in the alloys with the content of aluminum up to 14 12 wt% the average grain size reaches 1 mm. According to the data of mechanical testing at room temperature, with a decrease in the content of aluminum the ultimate tensile strength (σ{sub UTS}), the yield strength (σ{sub М}) and the relative elongation (δ) increase. An improvement of the mechanical properties of the alloys is attributed to the grain structure refinement of the β{sub 2}-austenite and package substructure of the β'{sub 1}-and γ'{sub 1}-martensites as the content of aluminum in the alloys decreases. For instance, in the fine-grained alloys containing 9.2 and 9.5 wt% Al the value of relative elongation remains at a high level (>10%), while for the other alloys with 10–14 wt% Al it does not exceed 5%. As the content of aluminum in the alloys decreases, the character of the specimen fracture under uniaxial tension changes (from brittle to ductile).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Solidification and crystallographic texture modeling of laser powder bed fusion Ti-6Al-4V using finite difference-monte carlo method

Laser powder bed fusion (LPBF) additive manufacturing makes near-net-shaped parts with reduced material cost and time, rising as a promising technology to fabricate Ti-6Al-4V, a widely used titanium alloy in aerospace and medical industries. However, LPBF Ti-6Al-4V parts produced with 67° rotation between layers, a scan strategy commonly used to reduce microstructure and property inhomogeneity, have varying grain morphologies and weak crystallographic textures that change depending on processing parameters. Here, this study predicts LPBF Ti-6Al-4V solidification at three energy levels using a finite difference-Monte Carlo method and validates the simulations with large-area electron backscatter diffraction (EBSD) scans. The developed model accurately shows that a <001> texture forms at low energy and a <111> texture occurs at higher energies parallel to the build direction but with a lower strength than the textures observed from EBSD. A validated and well-established method of combining spatial correlation and general spherical harmonics representation of texture is developed to calculate a difference score between simulations and experiments. The quantitative comparison enables effective fine-tuning of nucleation density (N 0 ) input, which shows a nonlinear relationship with increasing energy level. Future improvements in texture prediction code and a more comprehensive study of N 0 with different energy levels will further advance the optimization of LPBF Ti-6Al-4V components. These developments contribute a novel understanding of crystallographic texture formation in LPBF Ti-6Al-4V, the development of robust model validation and calibration pipeline methodologies, and provide a platform for mechanical property prediction and process parameter optimization.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Filament Wound Composite Analysis Using the NASA Multiscale Analysis Tool (NASMAT) and Finite Element Analysis

Fiber reinforced composite materials, owing to their tailorable thermomechanical and functional properties, allow one to produce a structure that is stronger, stiffer, and lighter than its metal counterpart while performing the same function, yielding a more efficient structure. This not only allows for the improvement of current technologies like aircraft structures, but also enables new technologies like gaseous hydrogen storage for mobility applications, which are otherwise impractical when manufactured using traditional metals due to weight and space restrictions or material embrittlement. However, the use of composites imposes greater design and manufacturing challenges on an engineer, since they are heterogenous, having a distinct structure across multiple length scale, behave generally anisotropically at the structural level and require complex manufacturing and processing methods. Capturing this complex behavior requires detailed numerical simulations, including the modeling of microstructural features like undulations, voids, and fiber alignment. In this paper, multiple repeating unit cells (RUCs), representing filament wound composites, are developed (via a script provided in the Appendix) and analyzed. The refinement of these RUCs is varied, and the analyses are performed using both the Abaqus finite element software and the NASA Multiscale Analysis Tool (NASMAT). A study is undertaken to compare the predicted effective elastic properties of the wound RUC to a laminate representation of the wound RUC, which neglects the undulations. Additionally, two different sets of periodic boundary conditions (PBCs) have been examined. One approximates the real boundary conditions using a standard approach and the other represents the PBCs exactly through the use of an offset. Lastly, a comparison of the local elastic stress fields is made among the models and approaches. Since wound structures are often approximated as laminated structures, it is important to understand the degree to which this assumption is valid, namely by first comparing the elastic constants and local elastic fields. This will provide, on the one hand, information concerning the bulk mechanical behavior and, on the other hand, insights concerning local load distributions and likely damage initiation sites.

Composites↗