Search NASA⌕ Search

SEARCH · Search NASA

Results for “linear dynamical system”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Wetting Behavior of TiO{sub 2} by Calcium Ferrite Slag at 1523 K

The wetting behaviors of a TiO{sub 2} substrate by calcium ferrite (CF) series slags were investigated using an improved sessile drop method at 1523 K (1250 °C). The initial contact angles were in the range 35 to 50 deg, the final equilibrium apparent contact angles were < 20 deg, and the spreading durations were in the range 75 to 180 seconds. The CF-TiO{sub 2} system showed reactive wetting, which was categorized into four dynamic stages. Stage I: physical spreading, stage II: slow linear spreading, stage III: fast linear spreading, and stage IV: equilibrium. Interfacial reactions yielded CaTiO{sub 3} during reactive spreading, thereby transitioning TiO{sub 2} wetting into CaTiO{sub 3} wetting and then forming Fe{sub 2}TiO{sub 5} and FeTiO{sub 3} owing to the excess Fe{sub 2}O{sub 3} and FeO that had accumulated in the interfacial zone. Although stage III spreading was faster than stage II spreading, adding MgO to the slag slowed stage III spreading. The interfacial microstructure of the residual slag was roughly divided into three layers owing to the different densities of the slag and solid products. The top layer was composed of CaTiO{sub 3} and Fe{sub 2}O{sub 3}, the middle one was composed of CaTiO{sub 3} and Fe{sub 2}TiO{sub 5}, and the bottom one was composed of Fe{sub 2}TiO{sub 5} and FeTiO{sub 3}. Adding TiO{sub 2} to the slag produced a dense CaTiO{sub 3}-containing interfacial layer, resulting in CF being detected in the residual slag.

36 MATERIALS SCIENCE↗

Extrapolation of thermal conductivity in non-equilibrium molecular dynamics simulations to bulk scale

Predictions of the bulk scale thermal conductivity of solids using non-equilibrium molecular dynamics (MD) simulations have relied on the linear extrapolation of the thermal resistivity versus the reciprocal of the system length in the simulations. Several studies have reported deviation of the extrapolation from linearity near the micro-scale, raising a concern of its applicability to large systems. To investigate this issue, present work conducted extensive MD simulations of silicon with two different potentials (EDIP and Tersoff-II) for unprecedented length scales up to 10.3 μm and simulation times up to 530 ns. For large systems ≥0.35 μm in size the non-linearity of the extrapolation of the reciprocal of the thermal conductivity is mostly due to ignoring the dependence of the thermal conductivity on temperature. To account for such dependence, the present analysis fixes the temperature range for determining the gradient for calculating the thermal conductivity values. However, short systems ≤0.23 μm in size show significant non-linearity in the calculated thermal conductivity values using a temperature window of 500 ± 10 K from the simulations results with the EDIP potential. Since these system sizes are shorter than the mean phonon free path in EDIP (~0.22 μm), the nonlinearity may be attributed to phonon transport. For the MD simulations with the Tersoff-II potential there is no significant non-linearity in the calculated thermal conductivity values for systems ranging in size from 0.05 to 5.4 μm.

42 ENGINEERING↗

Simulation of radiation damping in rings, using stepwise ray-tracing methods

The ray-tracing code Zgoubi computes particle trajectories in arbitrary magnetic and/or electric field maps or analytical field models. It includes a built-in fitting procedure, spin tracking many Monte Carlo processes. The accuracy of the integration method makes it an efficient tool for multi-turn tracking in periodic machines. Energy loss by synchrotron radiation, based on Monte Carlo techniques, had been introduced in Zgoubi in the early 2000s for studies regarding the linear collider beam delivery system. However, only recently has this Monte Carlo tool been used for systematic beam dynamics and spin diffusion studies in rings, including eRHIC electron-ion collider project at the Brookhaven National Laboratory. Some beam dynamics aspects of this recent use of Zgoubi capabilities, including considerations of accuracy as well as further benchmarking in the presence of synchrotron radiation in rings, are reported here.

43 PARTICLE ACCELERATORS↗

Non-Markovian master equation for a damped oscillator with time-varying parameters

We derive an exact non-Markovian master equation that generalizes the previous work [Hu, Paz and Zhang, Phys. Rev. D 45, 2843 (1992)] to damped harmonic oscillators with time-varying parameters. This is achieved by exploiting the linearity of the system and operator solution in Heisenberg picture. Our equation governs the non-Markovian quantum dynamics when the system is modulated by external devices. As an application, we apply our equation to parity kick decoupling problems. The time-dependent dissipative coefficients in the master equation are shown to be modified drastically when the system is driven by {pi} pulses. For coherence protection to be effective, our numerical results indicate that kicking period should be shorter than memory time of the bath. The effects of using soft pulses in an ohmic bath are also discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A Frequency Control Method for Islanded Microgrids Using Energy Storage Systems

Islanded microgrids are vulnerable to frequency fluctuations due to the presence of low-inertia distributed energy resources (DERs). Moreover, implementation of both synchronous-based and inverter-based DERs with a significant difference in inertia leads to a power imbalance between generation and consumption during transients. This results in frequency variations which might have severe consequences such as blackouts. This paper develops a control scheme for battery energy storage systems (BESSs) to enhance the dynamic response of islanded microgrids by mitigating the frequency fluctuations. A piecewise linear-elliptic (PLE) droop characteristic is proposed and employed in BESS to achieve a faster power balance between generation and consumption during transients, resulting in enhanced frequency responses. Different case studies are carried out to validate the viability of the proposed approach in improving the dynamics of islanded microgrids.

Pilehvar, Mohsen S.↗

New considerations for pogo prevention on space shuttle

Recommendations for improving the methodology of pogo suppression for the space shuttle include: Consideration of inter-pump location for accumulator or active device, inclusion of tank outflow effects in dynamic structural analysis, the use of simplified transfer functions in systems studies, three phase dynamic testing program for turbopump with development of dynamic flowmeters, and the use of a linearized mathematical model for engine physics studies.

Rubin, S.↗

Design and testing of a coaxial linear magnetic spring with integral linear motor

The design of a coaxial linear magnetic spring which incorporates a linear motor to control axial motion and overcome system damping is presented, and the results of static and dynamic tests are reported. The system has nominal stiffness 25,000 N/m and is designed to oscillate a 900-g component over a 4.6-mm stroke in a Stirling-cycle cryogenic refrigerator being developed for long-service (5-10-yr) space applications (Stolfi et al., 1983). Mosaics of 10 radially magnetized high-coercivity SmCO5 segments enclosed in Ti cans are employed, and the device is found to have quality factor 70-100, corresponding to energy-storage efficiency 91-94 percent. Drawings, diagrams, and graphs are provided.

Patt, P. J.↗

Modal techniques for analyzing airplane dynamics

A series of techniques are presented for analyzing airplane control and output characteristics. State-space matrix equations describing the linear perturbation dynamics are transformed from physical coordinates into scaled, modal coordinates. Techniques for analyzing the impacts of system inputs on the fundamental modes of motion and the appearance of these modes in the system outputs are explained. Scaled modal matrices are used to compute steady-state control inputs which optimize the steady-state response of selected system outputs. Graphics which promote quick understanding of the analysis are presented to display the resulting vectors and matrices. The defined analysis techniques are applied to an example airplane model, illustrating the insight which can be acquired using the described modal techniques.

Arbuckle, P. Douglas↗

CSI, optimal control, and accelerometers: Trials and tribulations

New results concerning optimal design with accelerometers are presented. These results show that the designer must be concerned with the stability properties of two Linear Quadratic Gaussian (LQG) compensators, one of which does not explicitly appear in the closed-loop system dynamics. The new concepts of virtual and implemented compensators are introduced to cope with these subtleties. The virtual compensator appears in the closed-loop system dynamics and the implemented compensator appears in control electronics. The stability of one compensator does not guarantee the stability of the other. For strongly stable (robust) systems, both compensators should be stable. The presence of controlled and uncontrolled modes in the system results in two additional forms of the compensator with corresponding terms that are of like form, but opposite sign, making simultaneous stabilization of both the virtual and implemented compensator difficult. A new design algorithm termed sensor augmentation is developed that aids stabilization of these compensator forms by incorporating a static augmentation term associated with the uncontrolled modes in the design process.

Benjamin, Brian J.↗

Recent Updates to the GEOS-5 Linear Model

Global Modeling and Assimilation Office (GMAO) is close to having a working 4DVAR system and has developed a linearized version of GEOS-5.This talk outlines a series of improvements made to the linearized dynamics, physics and trajectory.Of particular interest is the development of linearized cloud microphysics, which provides the framework for 'all-sky' data assimilation.

Adjoint↗

Simulation and Analysis of Technology and Operational Procedures to Reduce the Combined Effects of Emissions and Contrails

The development and evaluation of concepts and technology to support future air traffic management systems require a hierarchy of models ranging from real-time simulations to extensive field evaluations. Air traffic simulation models such as Airspace Concept Evaluation System, Center Tracon Automation System, Future Air traffic management Concept Evaluation Tool and others are used to design air traffic systems balancing the conflicting objectives of maximizing safety, meeting future demands for airports and airspace and increase efficiency of traffic flows in the presence of uncertain weather. The impact of aviation emissions and contrails on climate imposes another constraint on the design of aircraft and aviation operations. The understanding of the complex interaction between physical climate system, the carbon and other greenhouse gas emissions and aviation activity can be improved by the development of integrated assessment models that include emission and climate models together with air traffic simulations. The modeling of aircraft emissions and their interaction with each other to change the concentration levels of different gasses in the atmosphere and the resulting impact of the radiative forcing on the equilibrium of the Earth's atmosphere is complex and requires the use of coupled atmosphere-ocean general circulation models together with three-dimensional models of carbon cycle and chemistry of other non-CO2 greenhouse gases. These models are computationally intensive and unsuitable for studies involving the generation of multiple scenarios. Simple emission and climate models, based on the input-output relations of linear systems, capture the fundamental emission to climate impact behavior by careful selection of key variables and their dynamics. The impact of various greenhouse gases depends on the total concentration, effect per unit change in atmospheric concentration and the spatial distribution of the gas. All these quantities are influenced by the lifetime of the gas. The impact of a greenhouse gas depends on the interval of assessment, which may vary from a few decades to a few centuries. Climate metrics are aimed at providing a common scale to compare different greenhouse gases. If the metrics are to be used as a tool in developing and evaluating aviation operations, they should be transparent and easy to apply. Global Warming Potential and Aggregate Global Temperature Potential are some of the commonly used metrics. This paper integrates a national-level air traffic simulation and optimization capability with simple climate models and carbon cycle models, and climate metrics to assess the impact of aviation on climate. The capability brings together metrics, which are useful in aviation operations together with metrics used in climate studies. The capability can be used to make trade-offs between extra fuel cost and reduction in climate impact. There is considerable uncertainty in our understanding of the radiative forcing associated with emissions and contrails. The parameters in the simulation can be used to evaluate the effect of various uncertainties in emission models and contrails. It can also be used to evaluate the impact of different decision horizons. Alternatively, the optimization results from the simulation can be used as inputs to other tools that monetize global climate impacts like the FAA's Aviation Environmental Portfolio Management Tool for Impacts.

impact of aviation on the environment↗

Computational Intelligence Based Data Fusion Algorithm for Dynamic sEMG and Skeletal Muscle Force Modelling

In this work, an array of three surface Electrography (sEMG) sensors are used to acquired muscle extension and contraction signals for 18 healthy test subjects. The skeletal muscle force is estimated using the acquired sEMG signals and a Non-linear Wiener Hammerstein model, relating the two signals in a dynamic fashion. The model is obtained from using System Identification (SI) algorithm. The obtained force models for each sensor are fused using a proposed fuzzy logic concept with the intent to improve the force estimation accuracy and resilience to sensor failure or misalignment. For the fuzzy logic inference system, the sEMG entropy, the relative error, and the correlation of the force signals are considered for defining the membership functions. The proposed fusion algorithm yields an average of 92.49% correlation between the actual force and the overall estimated force output. In addition, the proposed fusionbased approach is implemented on a test platform. Experiments indicate an improvement in finger/hand force estimation.

42 ENGINEERING↗

Ion Solid Interaction And Surface Modification At RF Breakdown In High-Gradient Linacs

Ion solid interactions have been shown to be an important new mechanism of unipolar arc formation in high-gradient rf linear accelerators through surface self-sputtering by plasma ions, in addition to an intense surface field evaporation. We believe a non-Debye plasma is formed in close vicinity to the surface and strongly affects surface atomic migration via intense bombardment by ions, strong electric field, and high surface temperature. Scanning electron microscope studies of copper surface of an rf cavity were conducted that show craters, arc pits, and both irregular and regular ripple structures with a characteristic length of 2 microns on the surface. Strong field enhancements are characteristic of the edges, corners, and crack systems at surfaces subjected to rf breakdown.

43 PARTICLE ACCELERATORS↗

Dynamic Optimal Dispatch of Energy Systems with Intermittent Renewables and Damage Model

With the increasing penetration of intermittent renewable energy sources into the grid, there is a growing need for process systems-based strategies that integrate dispatchable and variable energy systems for supplying the demand while maintaining grid reliability. The proposed framework corresponds to a dynamic mixed-integer linear programming optimization approach that integrates coal-fired and natural gas-fired power plants, NaS batteries for energy storage, and solar/wind energy to supply the demand. This optimization approach considers an economic goal and constraints to provide power balance while maintaining the overall damage of the natural gas combined cycle (NGCC) power plant drum under a maximum stress as well as avoiding the overheating of the NGCC superheater and reheater. Renewable curtailment levels are also retained at minimum levels. Case studies are analyzed considering different loads and renewable penetration levels. The results show that the demand was met for all cases. Grid flexibility was mostly provided by the NGCC, while the batteries were used sparingly. In addition, considering a CO 2 equivalent analysis, the environmental performance was intrinsically connected to grid flexibility and the level of renewable penetration. Stress analysis results reinforced the necessity for an equipment health-related constraint.

97 MATHEMATICS AND COMPUTING↗

The design of a simulated in-line side-coupled 6 MV linear accelerator waveguide

Purpose: The design of a 3D in-line side-coupled 6 MV linac waveguide for medical use is given, and the effect of the side-coupling and port irises on the radio frequency (RF), beam dynamics, and dosimetric solutions is examined. This work was motivated by our research on a linac-MR hybrid system, where accurate electron trajectory information for a clinical medical waveguide in the presence of an external magnetic field was needed. Methods: For this work, the design of the linac waveguide was generated using the finite element method. The design outlined here incorporates the necessary geometric changes needed to incorporate a full-end accelerating cavity with a single-coupling iris, a waveguide-cavity coupling port iris that allows power transfer into the waveguide from the magnetron, as well as a method to control the RF field magnitude within the first half accelerating cavity into which the electrons from the gun are injected. Results: With the full waveguide designed to resonate at 2998.5{+-}0.1 MHz, a full 3D RF field solution was obtained. The accuracy of the 3D RF field solution was estimated through a comparison of important linac parameters (Q factor, shunt impedance, transit time factor, and resonant frequency) calculated for one accelerating cavity with the benchmarked program SUPERFISH. It was found that the maximum difference between the 3D solution and SUPERFISH was less than 0.03%. The eigenvalue solver, which determines the resonant frequencies of the 3D side-coupled waveguide simulation, was shown to be highly accurate through a comparison with lumped circuit theory. Two different waveguide geometries were examined, one incorporating a 0.5 mm first side cavity shift and another with a 1.5 mm first side cavity shift. The asymmetrically placed side-coupling irises and the port iris for both models were shown to introduce asymmetries in the RF field large enough to cause a peak shift and skewing (center of gravity minus peak shift) of an initially cylindrically uniform electron beam accelerating within the waveguide. The shifting and skewing of the electron beam were found to be greatest due to the effects of the side-coupling irises on the RF field. A further Monte Carlo study showed that this effect translated into a 1% asymmetry in a 40x40 cm{sup 2} field dose profile. Conclusions: A full 3D design for an in-line side-coupled 6 MV linear accelerator that emulates a common commercial waveguide has been given. The effect of the side coupling on the dose distribution has been shown to create a slight asymmetry, but overall does not affect the clinical applicability of the linac. The 3D in-line side-coupled linac model further provides a tool for the investigation of linac performance within an external magnetic field, which exists in an integrated linac-MR system.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Operator inference for non-intrusive model reduction with quadratic manifolds

This paper proposes a novel approach for learning a data-driven quadratic manifold from high-dimensional data, then employing this quadratic manifold to derive efficient physics-based reduced-order models. The key ingredient of the approach is a polynomial mapping between high-dimensional states and a low-dimensional embedding. This mapping consists of two parts: a representation in a linear subspace (computed in this work using the proper orthogonal decomposition) and a quadratic component. The approach can be viewed as a form of data-driven closure modeling, since the quadratic component introduces directions into the approximation that lie in the orthogonal complement of the linear subspace, but without introducing any additional degrees of freedom to the low-dimensional representation. Combining the quadratic manifold approximation with the operator inference method for projection-based model reduction leads to a scalable non-intrusive approach for learning reduced-order models of dynamical systems. Further, applying the new approach to transport-dominated systems of partial differential equations illustrates the gains in efficiency that can be achieved over approximation in a linear subspace.

42 ENGINEERING↗

Crossover of the Thermal Escape Problem in Annular Spatially Distributed Systems

The computer simulations of fluctuational dynamics of an annular system governed by the sine-Gordon model with a white noise source are performed. It is demonstrated that the mean escape time (MET) of a phase string for an annular structure can be much larger than for a linear one and has a strongly pronounced maximum as a function of system's length. The location of the MET maximum roughly equals the size of the kink-antikink pair, which leads to evidence of a spatial crossover between two dynamical regimes: when the phase string escapes over the potential barrier as a whole and when the creation of kink-antikink pairs is the main mechanism of the escape process. For large lengths and in the limit of small noise intensity gamma, for both MET and inverse concentration of kinks, we observe the same dependence versus the kink energy E{sub k}: approxexp(2E{sub k}/gamma) for the annular structure and approxexp(E{sub k}/gamma) for the linear one.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dynamic heat capacity of the east model and of a bead-spring polymer model.

In this report we have presented a brief review of the glass transition and one means of characterizing glassy materials: linear and nonlinear thermodynamic oscillatory experiments to extract the dynamic heat capacity. We have applied these methods to the east model (a variation of the Ising model for glass forming systems) and a simple polymeric system via molecular dynamics simulation, and our results match what is seen in experiment. For the east model, since the dynamics are so simple, a mathematical model is developed that matches the simulated dynamics. For the polymeric system, since the system is a simulation, we can instantaneously 'quench' the system - removing all vibrational energy - to separate the vibrational dynamics from dynamics associated with particle rearrangements. This shows that the long-time glassy dynamics are due entirely to the particle rearrangements, i.e. basin jumping on the potential energy landscape. Finally, we present an extension of linear dynamic heat capacity to the nonlinear regime.

36 MATERIALS SCIENCE↗