Search NASA⌕ Search

SEARCH · Search NASA

Results for “mapping variables”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Visual Systems Mapping to Define and Compare Woody Biomass LCAs for Sustainable Systems

The challenge addressed in this research centres on the need to choose between several biomass sources and energy production processes, while supporting rural economies and resilience of forest systems. A key barrier to effective decision-making for strategies using biomass is the lack of standardized and transparent life cycle assessment (LCA) baselines. These baselines are critical for assessing the impacts of biomass strategies but often vary due to regional factors and chosen simplifying assumptions of the LCAs. However, omitting key variables can mean the LCA omits key feedback and balancing loops relevant to fully assessing impacts of the change or test scenario. To address these complexities, this project employs a systems engineering approach: visual systems mapping. This technique is used to define the boundaries and dynamic behaviours of LCA baselines, enhancing transparency. By examining five literature sources and their documented baseline scenarios, the systems mapping case-studies demonstrates an approach to documenting and archiving these baselines. Recommendations are that visual systems mapping should be used to document key assumptions, such as baselines, of LCAs. Further, where possible open data repositories should hold key information about LCA baselines and reproducible workflows (e.g., using open-source tools) should be used to improve transparency and comparability in LCAs. Given the consensus within the broader scientific community on the importance of replicable data practices, this research reinforces the need for standardized frameworks and systems engineering tools in LCAs. This research demonstrates a pathway to more transparent, standardized, and comparable LCAs, that may bolster decisions for biomass systems.

Davis, Maggie [ORNL] (ORCID:0000000181319328)↗

Implementation and application of the peak scaling method for temperature measurement in the laser heated diamond anvil cell

In this work, a new design for a double-sided high-pressure diamond anvil cell laser heating set-up is described. The prototype is deployed at beamline 12.2.2 of the Advanced Light Source at Lawrence Berkeley National Lab. Our compact design features shortened mechanical lever arms, which results in more stable imaging optics, and thus more user friendly and more reliable temperature measurements based on pyrometry. A modification of the peak scaling method was implemented for pyrometry, including an iterative method to determine the absolute peak temperature, thus allowing for quasi-real time temperature mapping of the actual hotspot within a laser-heated diamond anvil cell without any assumptions on shape, size, and symmetry of the hotspot and without any assumptions to the relationship between fitted temperature and peak temperature. This is important since we show that the relationship between peak temperature and temperature obtained by fitting the Planck function against the thermal emission spectrum averaged over the entire hotspot is not constant but depends on variable fitting parameters (in particular, the size and position of the fitting window). The accuracy of the method is confirmed through measuring melting points of metal wires at ambient pressure. Having absolute temperature maps in real time allows for more differentiated analyses of laser heating experiments. Finally, we present such an example of the pressure variations within a heated hotspot of AgI at a loaded base pressure of 3.8 GPa.

42 ENGINEERING↗

Variability of ozone near the tropopause from GASP data

The first 22 months of ozone data from the Global Atmospheric Sampling Program are summarized. Variations in space and time were examined at nearly all scales permitted by the data. Case studies in the tropics suggest that local ozone maxima may be found in or near clouds. Preliminary seasonal mean maps of ozone during spring are presented for the Northern Hemisphere. In the troposphere over the United States during summer there is a distinct midcontinental ozone maximum. There is a diurnal variation in ozone in the upper troposphere and the daily range is about 5 ppbv. Correlations between ozone and other variables are given for the synoptic-scale and on a hemispheric scale. The possible bearing of these results on ozone transport computations is discussed.

Nastrom, G. D.↗

WHONDRS laboratory time series moisture manipulative experiment from soil core layers across eastern contiguous US: time series aerobic respiration, geochemistry, and aggregates

This dataset supports a broader study examining the effects of wetting and drying on soil layers across the eastern contiguous United States (CONUS). The dataset provides data generated from a laboratory moisture manipulation experiment. The contents include time series aerobic respiration and moisture; dissolved oxygen; sediment geochemistry data; and field metadata. Samples were collected as part of a collaboration between WHONDRS (Worldwide Hydrobiogeochemistry Observation Network for Dynamic River Systems; https://whondrs.pnnl.gov) and MONet (Molecular Observation Network; https://www.emsl.pnnl.gov/monet). The field samples (soil cores) were labeled as MEL_##_COR and subsequent subsamples begin with MEL_##. Additional subsamples were taken for the laboratory experiment and were labeled as EL_##. The labels from the MEL field samples and the EL subsamples can be mapped directly based on the digits following the prefix and underscore (i.e., EL_01 is a subsample from MEL_01). See the critical details section below for more details on sample naming and experimental design.For details on how to navigate this data package, see this infographic from the River Corridor SFA https://data.ess-dive.lbl.gov/portals/PNNLRiverCorridorSFA/About.In addition to this readme, this data package also includes a file-level metadata (FLMD) file that describes each file and a data dictionary (DD) that describes all column/row headers and variable definitions.This dataset is comprised of (1) a folder containing environmental context photos; (2) file-level metadata; (3) data dictionary; (4) field metadata; (5) readme; (6) international generic sample number (IGSN) mapping file; and (7) a subfolder with soil sample data from field samples and the incubation experiment. The sample data subfolder contains (1) effect size; (2) gravimetric moisture from field samples and incubation experiment; (3) respiration rates, raw dissolved oxygen values, and plots; (4) specific conductance, pH, and temperature from the incubation; (5) soil aggregates; (6) a summary containing median values of each data type for each treatment (wet and dry) in the incubation; (7) a summary containing averages for each data type of each soil layer; and (8) methods codes. All files are .csv, .pdf, .jpeg, or .jpg.

54 ENVIRONMENTAL SCIENCES↗

A GRACE ‐based assessment of interannual groundwater dynamics in the C ommunity L and M odel

Abstract The estimation of groundwater storage variations is important for quantifying available water resources and managing storage surpluses to alleviate storage deficiencies during droughts. This is particularly true in semi‐arid regions, where multiyear droughts can be common. To complement the local information provided by soil moisture and well level measurements, land models such as the Community Land Model (CLM) can be used to simulate regional scale water storage variations. CLM includes a bulk aquifer model to simulate saturated water storage dynamics below the model soil column. Aquifer storage increases when it receives recharge from the overlying soil column, and decreases due to lateral flow (i.e., base flow) and capillary rise. In this study, we examine the response of the CLM aquifer model to transitions between low and high recharge inputs, and show that the model simulates unrealistic long‐period behavior relative to total water storage (TWS) observations from the Gravity Recovery and Climate Experiment (GRACE). We attribute the model's poor response to large wetting events to the lack of a finite lower boundary in the bulk aquifer model. We show that by removing the bulk aquifer model and adding a zero‐flux boundary condition at the base of the soil column, good agreement with GRACE observations can be achieved. In addition, we examine the sensitivity of simulated total water storage to the depth at which the zero‐flux boundary is applied, i.e., the thickness of the soil column. Based on comparisons to GRACE, an optimal soil thickness map is constructed. Simulations using the modified CLM with the derived soil thickness map are shown to perform as well or better than standard CLM simulations. The improvements in simulated, climatically induced, long‐period water storage variability will reduce the uncertainty in GRACE‐based estimates of anthropogenic groundwater depletion.

Swenson, S. C.↗

Systems of Functions Orthogonal Over the Domain and Their Application in Boundary-Value Problems of Mathematical Physics

We formulate a boundary-value problem for eigenvalues and eigenfunctions of the Helmholtz equation in a complex domain with the use of mutually conjugated complex variables. The obtained systems of functions are orthogonal in this domain and constructed by using the Bessel functions and powers of the conformal mappings of the analyzed domains onto a circle. The solutions of boundary-value problems for the principal equations of mathematical physics (hyperbolic, parabolic and elliptic types) are obtained in the form of the sums of series in the systems of functions orthogonal over the domain.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The beamline ID32 at the ESRF for soft X-ray high energy resolution resonant inelastic X-ray scattering and polarisation dependent X-ray absorption spectroscopy

Here, the ID32 Soft X-ray Beamline line is an ESRF upgrade beamline for X-ray absorption (XAS) and Resonant Inelastic X-ray Scattering (RIXS) spectroscopic studies. It was opened to Users in October 2014 and provides polarised soft X-rays in the 400–1600 eV energy range. It has two branches: One branch has been designed for X-ray magnetic dichroism experiments, both linear (XMLD) and circular (XMCD), with high sensitivity, reproducibility, flexibility, user friendliness and the capability for fast energy scanning. The X-ray beam is available in two experimental areas, one with a dedicated superconducting high field magnet and a sample preparation facility, the second area being open for User instruments. The other branch is dedicated to very high energy resolution Resonant Inelastic X-ray Scattering experiments with a combined resolving power up to 30 000 around 930 eV. A scattering arm which is continuously variable under UHV vacuum over 100 degrees and a four-circle sample goniometer allows accurate positioning of the sample to enable 3D mapping of q space. Combined with the possibility of polarisation analysis of the outgoing photons the beamline provides a state-of-the-art soft X-ray RIXS facility.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

GEMINI MULTI-OBJECT SPECTROGRAPH SPECTROSCOPY OF EXO 0748-676 (=UY Vol) IN OUTBURST

We present a phase-resolved, optical, spectroscopic study of the eclipsing low-mass X-ray binary, EXO 0748-676 = UY Vol. The sensitivity of Gemini, combined with our complete phase coverage, makes for the most detailed blue spectroscopic study of this source obtained during its extended 24 year period of activity. We identify 12 optical emission lines and present trailed spectra, tomograms, and the first modulation maps of this source in outburst. The strongest line emission originates downstream of the stream-impact point, and this component is quite variable from night to night. Underlying this is weaker, more stable axisymmetric emission from the accretion disk. We identify weak, sharp emission components moving in phase with the donor star, from which we measure K{sub em} = 329 {+-} 26 km s{sup -1}. Combining all the available dynamical constraints on the motion of the donor star with our observed accretion disk velocities, we favor a neutron star mass close to canonical (M{sub 1} {approx_equal} 1.5 M{sub Sun }) and a very low mass donor (M{sub 2} {approx_equal} 0.1 M{sub Sun }). We note, however, that there is no evidence for CNO processing, which is often associated with undermassive donor stars. A main-sequence donor would require both a neutron star more massive than 2 M{sub Sun }, and substantially sub-Keplerian disk emission.

79 ASTRONOMY AND ASTROPHYSICS↗

Following dynamic nuclear wave packets in N{sub 2},O{sub 2}, and CO with few-cycle infrared pulses

We study the evolution of nuclear wave packets launched in molecular nitrogen, oxygen, and carbon monoxide by intense 8-fs infrared pulses. We use velocity map imaging to measure the momentum of the ion fragments when these wave packets are interrogated by a second such pulse after a variable time delay. Both quasibound and dissociative wave packets are observed. For the former, measurements of bound-state oscillations are used to identify the participating states and, in some cases, extract properties of the relevant potential-energy surfaces. Vibrational structure is resolved in both energy and oscillation frequencies for the cations of oxygen and carbon monoxide, displaying the same quantum wave-packet motion in both energy and time domains. In addition, vibrational structure is seen in the dication of carbon monoxide in a situation where the energy resolution by itself is inadequate to resolve the structure.

74 ATOMIC AND MOLECULAR PHYSICS↗

Lefschetz thimble quantum Monte Carlo for spin systems

Monte Carlo simulations are useful tools for modeling quantum systems, but in some cases they suffer from a sign problem, leading to an exponential slow down in their convergence to a value. While solving the sign problem is generically NP hard, many techniques exist for mitigating the sign problem in specific cases; in particular, the technique of deforming the Monte Carlo simulation's plane of integration onto Lefschetz thimbles (complex hypersurfaces of stationary phase) has seen significant success in the context of quantum field theories. We extend this methodology to spin systems by utilizing spin coherent state path integrals to reexpress the spin system's partition function in terms of continuous variables. Using some toy systems, we demonstrate its effectiveness at lessening the sign problem in this setting, despite the fact that the initial mapping to spin coherent states introduces its own sign problem. The standard formulation of the spin coherent path integral is known to make use of uncontrolled approximations; despite this, for large spins they are typically considered to yield accurate results, so it is somewhat surprising that our results show significant systematic errors. Furthermore, possibly of independent interest, our use of Lefschetz thimbles to overcome the intrinsic sign problem in spin coherent state path integral Monte Carlo enables a novel numerical demonstration of a breakdown in the spin coherent path integral.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The ongoing destabilization of the mosul dam as observed by synthetic aperture radar interferometry

We present a detailed survey here on the ongoing destabilization process of the Mosul dam. The dam is located on the Tigris river and is the biggest hydraulic structure in Iraq. From a geological point of view the dam foundation is unstable due to the underlying geology that is formed by alternate and variable strata of highly soluble materials such as gypsum, anhydrite, marl and limestone. We present the first comprehensive multi-sensor cumulative deformation map for the dam generated from space-based synthetic aperture radar (SAR) measurements from the Italian constellation COSMO-SkyMed and the European Sentinel-1a satellite. We compared 2014-2016 data to an historic dataset spanning 2004-2010 acquired with the Envisat ASAR sensor. We found that deformation was rapid during 2004-2010, slowed down in 2012-2014, and restarted in August 2014 when grouting operations stopped due to the temporary capture of the dam by the self proclaimed Islamic State in Iraq and Syria (ISIS). We took advantage of the availability of data from multiple SAR satellites to infer the deformation at the dam in great spatial and temporal detail and shed new light on the processes of the ongoing destabilization. This study highlights how new constellations of SAR sensors together with the availability of historical datasets are leading to important advances in deformation monitoring of small scale geologic and manmade features.

58 GEOSCIENCES↗

New River Geothermal Exploration (Ram Power Inc.)

The New River Geothermal Exploration (DOE Award No. EE0002843) is located approximately 25km south of the Salton Sea, near town of Brawley in Imperial County and approximately 150km east of San Diego, California. A total of 182 MT Logger sites were completed covering the two separate Mesquite and New River grids. The data was collected over a frequency range of 320Hz to 0.001Hz with variable site spacing. A number of different inversion algorithms in 1D, 2D and 3D were used to produce resistivity-depth profiles and maps of subsurface resistivity variations over the survey area. For 2D inversions, a total of eighteen lines were constructed in east-west and north-south orientations crossing the entire survey area. For MT 3D inversion, the New River property was divided in two sub-grids, Mesquite and New River areas. The report comprises of two parts. For the first part, inversions and geophysical interpretation results are presented with some recommendations of the potential targets for future follow up on the property. The second part of the report describes logistics of the survey, survey parameters, methodology and the survey results (data) in digital documents. The report reviews a Spartan MT survey carried out by Quantec Geoscience Limited over the New River Project in California, USA on behalf of Ram Power Inc. Data was acquired over a period of 29 days from 2010/06/26 to 2010/07/24.

15 GEOTHERMAL ENERGY↗

A deep X-ray view of the bare AGN Ark 120. II. Evidence for Fe K emission transients

We report on the results from a large observational campaign on the bare Seyfert galaxy Ark 120, jointly carried out in 2014 with XMM-Newton, Chandra, and NuSTAR. The fortunate line of sight to this source, devoid of any significant absorbing material, provides an incomparably clean view to the nuclear regions of an active galaxy. Here we focus on the analysis of the iron fluorescence features, which form a composite emission pattern in the 6–7 keV band. The prominent Kα line from neutral iron at 6.4 keV is resolved in the Chandra High-Energy Transmission Grating spectrum to a full-width at half maximum of 4700{sub −1500}{sup +2700} km s{sup −1}, consistent with an origin from the optical broad-line region. Excess components are detected on both sides of the narrow Kα line: the red one (6.0–6.3 keV) clearly varies in strength in about one year, and hints at the presence of a broad, mildly asymmetric line from the accretion disk; the blue one (6.5–7.0 keV), instead, is likely a blend of different contributions, and appears to be constant when integrated over long enough exposures. However, the Fe K excess emission map computed over the 7.5 days of the XMM-Newton monitoring shows that both the red and blue features are actually highly variable on timescales of ∼10–15 hr, suggesting that they might arise from short-lived hotspots on the disk surface, located within a few tens of gravitational radii from the central supermassive black hole and possibly illuminated by magnetic reconnection events. Any alternative explanation would still require a highly dynamic, inhomogeneous disk/coronal system, involving clumpiness and/or instability.

79 ASTRONOMY AND ASTROPHYSICS↗

Application of LANDSAT data to delimitation of avalanche hazards in Montane Colorado

The author has identified the following significant results. Many avalanche hazard zones can be identified on LANDSAT imagery, but not consistently over a large region. Therefore, regional avalanche hazard mapping, using LANDSAT imagery, must draw on additional sources of information. A method was devised that depicts three levels of avalanche hazards according to three corresponding levels of certainty that active avalanches occur. The lowest level, potential avalanche hazards, was defined by delineating slopes steep enough to support avalanches at elevations where snowfall was likely to be sufficient to produce a thick snowpack. The intermediate level of avalanche hazard was interpreted as avalanche hazard zones. These zones have direct and indirect indicators of active avalanche activity and were interpreted from LANDSAT imagery. The highest level of known or active avalanche hazards was compiled from existing maps. Some landslides in Colorado were identified and, to a degree, delimited on LANDSAT imagery, but the conditions of their identification were highly variable. Because of local topographic, geologic, structural, and vegetational variations, there was no unique landslide spectral appearance.

Knepper, D. H., Jr.↗

Sandqvist 187 - A dense molecular cloud in Norma

Observations of Sandqvist 187, an elongated dust cloud in the southern constellation Norma are presented and discussed. The cloud contains two Herbig-Haro objects, HH 56 and HH 57. HH 57 currently displays on its NE edge a 17th mag variable star of the FU Ori type. Using the Columbia University 1.2 m millimeter-wave telescope at Cerro Tololo, the region is mapped and an extended CO cloud which envelops and is elongated along the optical dust cloud is found. The position of maximum CO emission coincides with HH 56 and HH 57. Assuming a distance of 0.7 kpc, the total mass of the cloud is found to be close to 500 solar masses. The CO spectra show evidence of a molecular flow. Photographs and CCD images obtained mostly with the CTIO 4 m telescope show the detailed optical structure of the dark cloud's core region. The Herbig-Haro object HH 56 appears to be related to an emission-line star embedded in the small nebula Reipurth 13, not to the FU Ori star in HH 57.

Alvarez, H.↗

Optimization of linear, controlled structures

An approach to the integrated design of linear controlled structures, which is being investigated as part of NASA's controlled structures interaction (CSI) methodology development program, is presented. The approach is integrated in the sense that the structure and its controller are simultaneously designed. The design methodology uses constrained nonlinear optimization procedures based on analytically obtained gradients of the structural responses. Design of the controller is based on the so-called Q-parameterization theory, which parameterizes all closed-loop input/output maps achievable with stabiizing linear controllers. Very general objective and constraint functions are possible, and structural shape can be included in the design variables. This method has been partially implemented and demonstrated; early findings are reported.

Hunziker, K. Scott↗

NASA Goddard Space Flight Center Robotic Processing System Program Automation Systems, volume 2

Topics related to robot operated materials processing in space (RoMPS) are presented in view graph form. Some of the areas covered include: (1) mission requirements; (2) automation management system; (3) Space Transportation System (STS) Hitchhicker Payload; (4) Spacecraft Command Language (SCL) scripts; (5) SCL software components; (6) RoMPS EasyLab Command & Variable summary for rack stations and annealer module; (7) support electronics assembly; (8) SCL uplink packet definition; (9) SC-4 EasyLab System Memory Map; (10) Servo Axis Control Logic Suppliers; and (11) annealing oven control subsystem.

Dobbs, M. E.↗

Evaluation of microwave landing system approaches in a wide-body transport simulator

The objective of this study was to determine the suitability of flying complex curved approaches using the microwave landing system (MLS) with a wide-body transport aircraft. Fifty pilots in crews of two participated in the evaluation using a fixed-base simulator that emulated an MD-11 aircraft. Five approaches, consisting of one straight-in approach and four curved approaches, were flown by the pilots using a flight director. The test variables include the following: (1) manual and autothrottles; (2) wind direction; and (3) type of navigation display. The navigation display was either a map or a horizontal situation indicator (HSI). A complex wind that changed direction and speed with altitude, and included moderate turbulence, was used. Visibility conditions were Cat 1 or better. Subjective test data included pilot responses to questionnaires and pilot comments. Objective performance data included tracking accuracy, position error at decision height, and control activity. Results of the evaluation indicate that flying curved MLS approaches with a wide-body transport aircraft is operationally acceptable, depending upon the length of the final straight segment and the complexity of the approach.

Summers, L. G.↗