Search NASA⌕ Search

SEARCH · Search NASA

Results for “preparation methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Anomalous random correlations of force constants on the lattice dynamical properties of disordered Au-Fe alloys

Here, gold iron (Au-Fe) alloys are of immense interest due to their biocompatibility, anomalous Hall conductivity, and applications in various medical treatments. However, irrespective of the method of preparation, they often exhibit a high level of disorder with properties sensitive to the thermal or magnetic annealing temperatures. We calculate the lattice dynamical properties of Au 1–x Fe x alloys using density functional theory methods where, being multisite properties, reliable interatomic force constant (IFC) calculations in disordered alloys remain a challenge. We follow a twofold approach: an accurate IFC calculation in an environment with nominally zero chemical pair correlations to mimic the homogeneously disordered alloy and a configurational averaging for the desired phonon properties (e.g., dispersion, density of states, and entropy). We find an anomalous change in the IFC's and phonon dispersion (split bands) near x=0.19, which is attributed to the local stiffening of the Au-Au bonds when Au is in the vicinity of Fe. Other results based on mechanical and thermophysical properties reflect a similar anomaly: Phonon entropy, e.g., becomes negative below x=0.19, suggesting a tendency for chemical unmixing, reflecting the onset of a miscibility gap in the phase diagram. Our results match fairly well with reported data wherever available.

36 MATERIALS SCIENCE↗

Additive Manufacturing of High-Entropy Alloys: A Review

Owing to the reduced defects, low cost, and high efficiency, the additive manufacturing (AM) technique has attracted increasingly attention and has been applied in high-entropy alloys (HEAs) in recent years. It was found that AM-processed HEAs possess an optimized microstructure and improved mechanical properties. However, no report has been proposed to review the application of the AM method in preparing bulk HEAs. Hence, it is necessary to introduce AM-processed HEAs in terms of applications, microstructures, mechanical properties, and challenges to provide readers with fundamental understanding. Specifically, we reviewed (1) the application of AM methods in the fabrication of HEAs and (2) the post-heat treatment effect on the microstructural evolution and mechanical properties. Compared with the casting counterparts, AM-HEAs were found to have a superior yield strength and ductility as a consequence of the fine microstructure formed during the rapid solidification in the fabrication process. The post-treatment, such as high isostatic pressing (HIP), can further enhance their properties by removing the existing fabrication defects and residual stress in the AM-HEAs. Furthermore, the mechanical properties can be tuned by either reducing the pre-heating temperature to hinder the phase partitioning or modifying the composition of the HEA to stabilize the solid-solution phase or ductile intermetallic phase in AM materials. Moreover, the processing parameters, fabrication orientation, and scanning method can be optimized to further improve the mechanical performance of the as-built-HEAs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Greener process to synthesize water-soluble Mn.sup.2+-doped CdSSe(ZnS) core(shell) nanocrystals for ratiometric temperature sensing, nanocrystals, and methods implementing nanocrystals

Novel Mn.sup.2+-doped quantum dots are provided. These Mn.sup.2+-doped quantum dots exhibit excellent temperature sensitivity in both organic solvents and water-based solutions. Methods of preparing the Mn.sup.2+-doped quantum dots are provided. The Mn.sup.2+-doped quantum dots may be prepared via a stepwise procedure using air-stable and inexpensive chemicals. The use of air-stable chemicals can significantly reduce the cost of synthesis, chemical storage, and the risk associated with handling flammable chemicals. Methods of temperature sensing using Mn.sup.2+-doped quantum dots are provided. The stepwise procedure provides the ability to tune the temperature-sensing properties to satisfy specific needs for temperature sensing applications. Water solubility may be achieved by passivating the Mn.sup.2+-doped quantum dots, allowing the Mn.sup.2+-doped quantum dots to probe the fluctuations of local temperature in biological environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cathode catalysts for fuel cells

A method of preparation of metal-chalcogen-nitrogen-carbon (M-Ch-N—C) catalytic material utilizing a sacrificial support approach and using inexpensive and readily available precursors is described. Furthermore, the catalytic materials synthesized using the disclosed methods include multiple types of active sites.

Serov, Alexey↗

Multijunction organic photovoltaics incorporating solution and vacuum deposited active layers

There is disclosed an organic photovoltaic device comprising at least one first subcell comprising at least one first small molecular weight material deposited by solution processing, and at least one second subcell comprising a weight at least one second small molecular material deposited by vacuum evaporation. Also disclosed herein is a method for preparing an organic photovoltaic device comprising at least one first subcell comprising at least one first small molecular weight material and at least one second subcell comprising at least one second small molecular weight material, the method comprising depositing at least one first small weight material by solution processing; and depositing at least one second small weight material by vacuum evaporation.

Forrest, Stephen R.↗

Magnetic and dielectric characterization of Co{sub 0.9}Ni{sub 0.1}Fe{sub 2}O{sub 4} prepared by hydroxide co-precipitation method

Co{sub 1–x} Ni{sub x}Fe{sub 2}O{sub 4} (where x=0.1) were prepared by using the hydroxide co-precipitation method. An obtained precipitate was sintered at 1100°C by microwave sintering technique. The structural analysis confirms the single-phase cubic spinel structure with Fd-3m space group. The magnetic characterization was carried out at temperature 300K.Saturation magnetisation and coercivity is 77.22 and 908 Oe. Irreversibility is observed between the ZFC and FC curves at 100 Oe. The variation in the dielectric constant and loss tangent are studied at room temperature with increasing frequency. Continues decrease in the the dielectric constant with increasing frequency shows inverse dependence on frequency. Morphological and elemental studies were done by using the scanning electron microscope with EDAX.

36 MATERIALS SCIENCE↗

Systems and methods to maintain optimum stoichiometry for reactively sputtered films

The present invention relates to systems and methods for preparing reactively sputtered films. The films are generally thin transition metal oxide (TMO) films having an optimum stoichiometry for any useful device (e.g., a sub-stoichiometric thin film for a memristor device). Described herein are systems, methods, and calibrations processes that employ rapid control of partial pressures to obtain the desired film.

Source record↗

Preparation of amyloid-like fibrils containing magnetic iron oxide nanoparticles: Effect of protein aggregation on proton relaxivity

Highlights: Black-Right-Pointing-Pointer Preparation of amyloid materials labeled with magnetic iron oxide nanoparticles. Black-Right-Pointing-Pointer Characterization of amyloid materials by electron tomography. Black-Right-Pointing-Pointer Influence of protein aggregation on the magnetic nanoparticle properties. -- Abstract: A method to prepare amyloid-like fibrils functionalized with magnetic nanoparticles has been developed. The amyloid-like fibrils are prepared in a two step procedure, where insulin and magnetic nanoparticles are mixed simply by grinding in the solid state, resulting in a water soluble hybrid material. When the hybrid material is heated in aqueous acid, the insulin/nanoparticle hybrid material self assembles to form amyloid-like fibrils incorporating the magnetic nanoparticles. This results in magnetically labeled amyloid-like fibrils which has been characterized by Transmission Electron Microscopy (TEM) and electron tomography. The influence of the aggregation process on proton relaxivity is investigated. The prepared materials have potential uses in a range of bio-imaging applications.

60 APPLIED LIFE SCIENCES↗

Creating Functional Oxynitride–Silicon Interfaces and SrNbO 2 N Thin Films for Photoelectrochemical Applications

Photoelectrochemical performance dependence upon absorption length, carrier diffusion length, and surface area of an oxynitride photoabsorber is investigated. How best to fabricate optical-quality thin films of bandgap-tunable oxynitrides is also discussed. We targeted the stoichiometric compound SrNbO 2 N as an optimal wide-bandgap photoabsorber (1.9 eV) for use with silicon (1.1 eV) in a tandem structure photoelectrochemical cell. Preparation of perovskite oxynitrides at high-temperature as isolated powders is often straightforward, but it is difficult to integrate them as thin films in tandem junction devices with low-temperature materials. Here we develop the first method to prepare optical-quality SrNbO 2 N thin-films of tunable thickness and roughness on single-crystal silicon substrate. This achievement required an interfacial layer of ultra-thin TaN to be used as a barrier to reduce the inter-diffusion of silicon and oxygen during oxynitride syn-thesis. We produced a variety of SrNbO 2 N film thicknesses (20-440 nm) on n + -Si(100) surfaces. Roughness factor (0.14-21) scaled with thickness. The intrinsic photoelectrochemical activity of these devices was evaluated using a low-barrier sacrificial electron donor. Photocurrent density and photovoltage revealed a significant (and non-linear) dependence on film thickness and roughness. Furthermore, absorption length, carrier diffusion length, and surface area were each found to play key roles. Balancing these is required for optimally performing devices.

08 HYDROGEN↗

Salts for multivalent ion batteries

Methods for preparing electrolyte salts for alkaline earth metal-ion batteries (e.g., calcium and magnesium ion batteries) are described. The electrolyte salts comprise alkaline earth metal (e.g., Mg or Ca) salts of 3,4-dicyano-2-trifluoromethylimidazole (TDI). The methods comprise contacting TDI with an alkaline earth metal bis(trifluoroacetate) salt in trifluoroacetic acid.

25 ENERGY STORAGE↗

Understanding exceptional thermodynamic and kinetic stability of amorphous sulfur obtained by rapid compression

Amorphous sulfur (a-S) with excellent stability is obtained by rapid compression method. The prepared a-S has a single glassy phase and exhibits a wide supercooled liquid region of 112 K and much high thermal and kinetic stability at room temperature compared to that of conventional a-S fabricated by quenched method. The substantial improved thermal and kinetic stability is attributed to low energy state induced by rapid compressing process. The stable a-S is a model system for facilitating the studies of the nature of glasses and supercooled liquids.

36 MATERIALS SCIENCE↗

Conducting Compositions of Matter

The invention provides conductive compositions of matter, as well as methods for the preparation of the conductive compositions of matter, solutions comprising the conductive compositions of matter, and methods of preparing fibers or fabrics having improved anti-static properties employing the conductive compositions of matter.

Viswanathan, Tito↗

Conducting Compositions of Matter

The invention provides conductive compositions of matter, as well as methods for the preparation of the conductive compositions of matter, solutions comprising the conductive compositions of matter, and methods of preparing fibers or fabrics having improved anti-static properties employing the conductive compositions of matter.

Tito Viswanathan↗

Conducting compositions of matter

The invention provides conductive compositions of matter, as well as methods for the preparation of the conductive compositions of matter, solutions comprising the conductive compositions of matter, and methods of preparing fibers or fabrics having improved anti-static properties employing the conductive compositions of matter.

Viswanathan, Tito↗

Pulse electrodeposited nickel using sulphamate electrolyte for hardness and corrosion resistance

Highlights: • Nickel deposits from sulphamate solutions using pulse method are prepared. • Effect of duty cycle and frequency are studied. • XRD, SEM and AFM of the nickel deposits are characterized. • Corrosion characteristics of the nickel deposit are reported. - Abstract: Nickel deposits have been obtained on mild steel substrate by pulse current (PC) electrodeposition method using nickel sulphamate electrolyte. Micro hardness values increased with decreasing duty cycle and pulse frequency. X-ray diffraction studies revealed that (2 0 0) plane was predominant and the nickel deposit obtained at low duty cycle and low frequency has the smallest grain size. The surface morphology of the coatings was explored by scanning electron microscopy (SEM) and atomic force microscopy. These studies showed that the microstructure of the nickel coatings changed from pyramidal structure to homogeneous structure with increasing duty cycle and pulse frequencies. The corrosion resistance of coatings was evaluated by potentiodynamic polarization and electrochemical impedance studies in 3.5 wt% sodium chloride (NaCl) solutions. An enhancement of the corrosion resistance, charge-transfer resistance and wear resistance has been obtained at low duty cycle and low frequencies.

36 MATERIALS SCIENCE↗

Vanadium oxide (VO) based low cost counter electrode in dye sensitized solar cell (DSSC) applications

Vanadium oxide nanostars were synthesized by chemical method. The prepared Vanadium oxide nanostars are introduced into dye sensitized solar cell (DSSC) as counter electrode (CE) catalyst to replace the expensive platinum (Pt). The products were characterized by X-ray diffractometry (XRD), scanning electron microscopy (SEM), and Brunauer–Emmett–Teller (BET) method. The photovoltaic performance of the VO as counter electrode based DSSC was evaluated under simulated standard global AM 1.5G sunlight (100 mW/cm{sup 2}). The solar to electrical energy conversion efficiency (η) of the DSSC was found to be 0.38%.This work expands the Counter electrode catalyst, which can help to reduce the cost of DSSC and thereby encourage their fundamental research and commercial application.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis and Raman analysis of SnS nanoparticles synthesized by PVP assisted polyol method

SnS film was prepared by a simple drop casting method after synthesizing SnS nanoparticles by using PVP assisted polyol method. Confocal Raman study was carried out for the as deposited and annealed (150, 300 and 400 °C) films at two different excitation wavelengths 514 and 785 nm. At the excitation wavelength of 514 nm, the Raman modes showed for a mixed phase of SnS and SnS{sub 2} up to 150 °C and then only a pure SnS phase was observed up to 400 °C due to the dissociation of SnS{sub 2} in to SnS by releasing S. The increase in intensity of Raman (A{sub g} and B{sub 3g}) as well as IR (B{sub 3u}) active modes of SnS are observed with increasing annealing temperature at excitation wavelength 785 nm due to the increased crystallinity and inactiveness of SnS{sub 2} modes. X-ray diffraction confirming the formation of a single phase of SnS while the greater homogeneity in both size and shape of SnS nanoparticles were confirmed through surface morphology from SEM.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

UV-Resistant Microbes and UV-Blocking Microbial Extract

The present disclosure relates to a composition including an extract from an Acidithiobacillus bacteria or a yeast extracted after exposure of the bacteria to UV radiation. The disclosure further relates to a method of preparing a UV-blocking composition by exposing a culture of Acidithiobacillus or yeast to UV radiation and extracting UV-blocking cellular material produced in response to the UV radiation from the Acidithiobacillus or yeast. The disclosure further relates to a method of protecting an item from UV radiation damage by extracting UV-blocking cellular material from Acidithiobacillus or yeast exposed to UV radiation and covering the item with the UV-blocking cellular material. The disclosure further relates to a UV-resistant yeast cell and a UV-resistant bacterial cell.

Cuero, Raul G.↗