Search NASA⌕ Search

SEARCH · Search NASA

Results for “program implementation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Flight-test experience in digital control of a remotely piloted vehicle.

The development of a remotely piloted vehicle system consisting of a remote pilot cockpit and a ground-based digital computer coupled to the aircraft through telemetry data links is described. The feedback control laws are implemented in a FORTRAN program. Flight-test experience involving high feedback gain limits for attitude and attitude rate feedback variables, filtering of sampled data, and system operation during intermittent telemetry data link loss is discussed. Comparisons of closed-loop flight tests with analytical calculations, and pilot comments on system operation are included.

Edwards, J. W.↗

Users manual for Streamtube Curvature Analysis: Analytical method for predicting the pressure distribution about a nacelle at transonic speeds, volume 2

A special version of the Streamtube Curvature Analysis (STC) was been constructed to include a detached bow shock upstream of a plane or axisymmetric inlet. The bow wave is modeled using the method of Moeckel in conjunction with an approximate definition of the shock stand-off distance. A description of the Moeckel method and its implementation in the STC program are given.

Ferguson, D. R.↗

Numerical integration of shell equations using the field method.

The 'field method' for the numerical solution of even-order linear boundary-value problems in ordinary differential equations is formulated. This method converts the boundary-value problem into two successive initial-value problems, which may be solved by standard forward integration techniques. The method has been implemented in a computer program to calculate the static response of ring-stiffened branched shells of revolution to asymmetric loads. For such problems the field method eliminates the well-known numerical problem of 'long subintervals' and also executes operations significantly faster than other numerical integration methods.

Cohen, G. A.↗

A preliminary design and implementation of the low-thrust simulation and trajectory search program (LOWTRAJ)

The results are presented of one phase of research conducted for the JPL Solar Electric Propulsion (SEP) Navigation Software System development program. It deals only with the problem of designing the flight quality trajectory program, which is a major subset of the entire navigation software system. In this phase of research (breadboard development phase), attempts were made to assess the SEP trajectory software functional requirements, to investigate the program design method satisfying these requirements, to identify the primary anticipated problem areas, and to provide solutions to these problem areas. These efforts culminated in the development of a compact breadboard program. A functional description and the mathematical formulation of the program are presented.

Yen, C. L.↗

A study of gust response for a rotor-propeller in cruising flight

Equations of motion for a rotor-propeller aircraft in cruising flight have been developed and implemented in a computer program. The formulation is based on Galerkin's method using coupled mode shapes for the blade and wing. This procedure is applied to the analysis of two types of rotors, gimballed rotor and hingeless. The results are evaluated by means of eigenvalue analysis of the stability of the system and frequency response analysis of the gust and control response.

Yasue, M.↗

Earth Observatory Satellite system definition study. Report no. 7: EOS system definition report. Appendixes A through D

An analysis of the systems involved in the operation and support of the Earth Observatory Satellite (EOS) is presented. Among the systems considered are the following: (1) the data management system, (2) observatory to primary ground station communications links, (3) local user system, (4) techniques for recognizing ground control points, (5) the central data processing-implementation concept, and (6) program effectiveness analysis.

Source record↗

The initiatives of the Los Alamos Scientific Laboratory in the transfer of a new excavation technology

A system for making vertical or horizontal holes in rock or soil by progressive local melting is described. In one operation the three major tasks of excavation are performed with the Subterrene concept: (1) rock fracturing; (2) debris removal; and (3) wall stabilization. Potential applications of the Subterrene system are indicated, with emphasis on extraction of geothermal energy and development of superconduction transmission lines for electrical power. A program in technology dissemination implemented by the staff members is described. It is indicated that a large scale commercial utilization of the technology is required to complete the transfer of technology.

Hanold, R. J.↗

NASA plans for space-processing experiments on sounding rockets

Planning for sounding rocket space processing experiments in the second half of 1975 is reported. Currently operational sounding rocket systems are capable of carrying payloads containing more than 50 kg of experimental apparatus on trajectories including between 5 and 10 min of coasting flight above 100 km altitude. When equipped with stabilization systems to nullify angular velocities in their rotational degrees of freedom, these vehicles can provide an environment in which accelerations are less than 1 mm/sec per 2. The cost of flight operations to implement a rocket experiment program will be of the order of 2000 dollars per kg of discretionary payload, and within the next two years newly operational systems are expected to reduce the cost to about 700 dollars per kg.

Bredt, J. H.↗

Design-to-cost

Attempts made to design to costs equipment, vehicles and subsystems for various space projects are discussed. A systematic approach, based on mission requirement analysis, definition of a mission baseline design, benefit and cost analysis, and a benefit-cost analysis was proposed for implementing the cost control program.

Bradley, F. E.↗

Computer analysis of multicircuit shells of revolution by the field method

The field method, presented previously for the solution of even-order linear boundary value problems defined on one-dimensional open branch domains, is extended to boundary value problems defined on one-dimensional domains containing circuits. This method converts the boundary value problem into two successive numerically stable initial value problems, which may be solved by standard forward integration techniques. In addition, a new method for the treatment of singular boundary conditions is presented. This method, which amounts to a partial interchange of the roles of force and displacement variables, is problem independent with respect to both accuracy and speed of execution. This method was implemented in a computer program to calculate the static response of ring stiffened orthotropic multicircuit shells of revolution to asymmetric loads. Solutions are presented for sample problems which illustrate the accuracy and efficiency of the method.

Cohen, G. A.↗

EUV and X-ray spectroheliograph study

The results of a program directed toward the definition of an EUV and X-ray spectroheliograph which has significant performance and operational improvements over the OSO-7 instrument are documented. The program investigated methods of implementing selected changes and incorporated the results of the study into a set of drawings which defines the new instrument. The EUV detector performance degradation observed during the OSO-7 mission was investigated and the most probable cause of the degradation identified.

Knox, E. D.↗

Developing processing techniques for Skylab data

The author has identified the following significant results. The effects of misregistration and the scan-line-straightening algorithm on multispectral data were found to be: (1) there is greatly increased misregistration in scan-line-straightening data over conic data; (2) scanner caused misregistration between any pairs of channels may not be corrected for in scan-line-straightened data; and (3) this data will have few pure field center pixels than will conic data. A program SIMSIG was developed implementing the signature simulation model. Data processing stages of the experiment were carried out, and an analysis was made of the effects of spatial misregistration on field center classification accuracy. Fifteen signatures originally used for classifying the data were analyzed, showing the following breakdown: corn (4 signatures), trees (2), brush (1), grasses, weeds, etc. (5), bare soil (1), soybeans (1), and alfalfa (1).

Nalepka, R. F.↗

A numerical method for solving the Navier-Stokes equations with application to shock-boundary layer interactions

A numerical method for solving the compressible form of the unsteady Navier-Stokes equations is described. This method was originally presented in 1970 and has since been modified during the development of computer programs at Ames for implementing models that account for the effects of turbulence in shock-induced separated flows. Although this paper does not describe the turbulence models themselves, a complete description of the basic numerical method is given with emphasis on the choice of a computational mesh for high Reynolds number flows, finite-difference approximations for mixed partial derivatives, extension of the Courant-Friedrichs-Lewy stability condition for viscous flows, mesh boundary conditions, and numerical smoothing for strong shock-wave calculations.

Maccormack, R. W.↗

COMOC: a finite-element algorithm for the Navier-Stokes equations

Finite-element algorithm devised to facilitate solution of two-dimensional Navier-Stokes equations governing kinematics and thermodynamics of variable-viscosity, compressible, multiple-species fluid. Algorithm has been implemented into existing computer program system.

Baker, A. J.↗

Citizen's actions

The various ways in which energy may be conserved by individual citizens as consumers were explored. The following barriers against citizens implementing an effective conservation program were described: credibility gap between producers and consumers, consumptive lifestyles, inverted rate structure, low fuel costs, and initial costs compared to life cycle costs. The following indices for saving energy were identified: time to develop alternatives, scarcity of fuels, reduction of dependence on imports, and decreasing environmental pollution. The various approaches to encourage energy conservation by individuals were described, followed by specific conclusions and recommendations.

Source record↗

Microwave power transmission system studies. Volume 4: Sections 9 through 14 with appendices

The microwave rectifier technology, approaches to the receiving antenna, topology of rectenna circuits, assembly and construction, ROM cost estimates are discussed. Analyses and cost estimates for the equipment required to transmit the ground power to an external user. Noise and harmonic considerations are presented for both the amplitron and klystron and interference limits are identified and evaluated. The risk assessment discussion is discussed wherein technology risks are rated and ranked with regard to their importance in impacting the microwave power transmission system. The system analyses and evaluation are included of parametric studies of system relationships pertaining to geometry, materials, specific cost, specific weight, efficiency, converter packing, frequency selection, power distribution, power density, power output magnitude, power source, transportation and assembly. Capital costs per kW and energy costs as a function of rate of return, power source and transportation costs as well as build cycle time are presented. The critical technology and ground test program are discussed along with ROM costs and schedule. The orbital test program with associated critical technology and ground based program based on full implementation of the defined objectives is discussed.

Maynard, O. E.↗

Standardization and program effect analysis (Study 2.4). Volume 3: Design-to-cost analysis

The program procedures that were incorporated into an on-going "design-to-cost" spacecraft program are examined. Program procedures are the activities that support the development and operations of the flight unit: contract management, documents, integration meetings, engineering, and testing. This report is limited to the program procedures that were implemented, with emphasis on areas that may depart from normal satellite development practices.

Shiokari, T.↗

Cargo transportation by airships: A systems study

A systems engineering study of a lighter than air airship transportation system was conducted. The feasibility of the use of airships in hauling cargo was demonstrated. Social, legal, environmental and political factors were considered as well as the technical factors necessary to design an effective airship transportation system. In order to accomplish an effective airship transportation program two phases of implementation were recommended. Phase I would involve a fleet of rigid airships of 3.5 million cubic feet displacement capable of carrying 25 tons of cargo internal to the helium-filled gas bag. The Phase I fleet would demonstrate the economic and technical feasibility of modern-day airships while providing a training capability for the construction and operation of larger airships. The Phase II portion would be a fleet of rigid airships of 12 million cubic feet displacement capable of carrying a cargo of 100 tons a distance of 2,000 miles at a cruising speed of 60 mph. An economic analysis is given for a variety of missions for both Phase I and Phase II airships.

Huang, C. J.↗