Search NASA⌕ Search

SEARCH · Search NASA

Results for “scale of effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Effect of Environment on the Scale Formed on ODS FeCrAl at 1050 C and 1100 C

The surface scale formed on specimens of a commercial oxide dispersion strengthened (ODS) FeCrAl alloy (PM2000{trademark}) exposed for 1 and 500 h at 1050 C in dry O{sub 2}, Air + 10%H{sub 2}O and Ar + 10%H{sub 2}O consisted of a two-layer {alpha}-Al{sub 2}O{sub 3} structure with a columnar grain inner layer and a finer grain outer layer. The alumina scales formed in Air + 10%H{sub 2}O and Ar + 10%H{sub 2}O were slightly more than half of the thickness of the scale formed in dry O{sub 2}. The same two-layer structure was also observed after exposure for 500 h at 1100 C in dry O{sub 2} and 50%CO{sub 2} + 50%H{sub 2}O. The alumina scales formed in both atmospheres were similar in thickness. Oxides rich in Y and Ti at the gas - scale interface grew in size and number with time in each case. Using analytical transmission electron microscopy, alumina grain boundary segregation of both Y and Ti was evident near the gas interface but only Y segregation was detected near the metal interface. This difference was attributed to Ti depletion in the adjacent metal and the rapid outward flux of the smaller Ti ion through the scale.

36 MATERIALS SCIENCE↗

A regularized deconvolution method for turbulent closure modeling in implicitly filtered large-eddy simulation

Turbulence closure models that are based on a regularized deconvolution method (RDM) are proposed for application to implicitly filtered Large-Eddy Simulation (LES). This method reconstructs sub-grid scale contributions by approximately recovering filtered quantities through an optimization approach. Physical principles on the boundedness and conservation of reconstructed quantities are preserved by constraining the optimization problem. Further, to account for effects of scales that are not resolved in implicitly filtered LES, a reconstruction method is proposed that combines sub-grid projection and energy-similarity to enrich unresolved scales. With this method, closure models are developed for turbulent scalar fluxes and turbulence–chemistry interaction that are intrinsically consistent with the LES formulation. These closure models are evaluated in application to a piloted turbulent jet flame with inhomogeneous inlet composition, in which combustion is represented by a two-scalar manifold model. The RDM-formulation is benchmarked against simulations obtained using a presumed PDF method and eddy diffusivity closure model. In partially-premixed flame regions, it is observed that RDM improves the prediction of turbulent mixing, and faster grid convergence is observed for results with RDM compared to simulations employing a presumed PDF method.

42 ENGINEERING↗

Graviton confinement inside hypermonopoles of any dimension

We show the generic existence of metastable massive gravitons in the four-dimensional core of self-gravitating hypermonopoles in any number of infinite-volume extra-dimensions. Confinement is observed for Higgs and gauge bosons couplings of the order unity. Provided these resonances are light enough, they may realise the Dvali-Gabadadze-Porrati mechanism by inducing a four-dimensional gravity law on some intermediate length scales. The effective four-dimensional Planck mass is shown to be proportional to a negative power of the graviton mass. As a result, requiring gravity to be four-dimensional on cosmological length scales may solve the mass hierarchy problem.

79 ASTRONOMY AND ASTROPHYSICS↗

Experimental investigation of gamma effects on heat transfer to a 0.006 scale Shuttle Orbiter at Mach 6

Real-gas effects on heating to the windward centerline of the Shuttle Orbiter and shock shape were simulated by testing a 0.006-scale Orbiter model in Mach 6 air and CF4 flows. The range of free-stream Reynolds number, based on model length, was 0.4 x 10 to the 6th to 5.3 x 10 to the 6th for air, resulting in laminar and turbulent heating. The Reynolds number for CF4 was 0.3 x 10 to the 6th and gamma was equal to 1.13, corresponding to a normal shock density ratio of 12 as compared to 5.25 in air. Angle of attack was varied from 15 deg to 45 deg in 5 deg increments. Centerline heating distributions were compared for the two gases, and to Mach 8 wind-tunnel data, predictions, and flight (STS-1 and STS-2) data. The present results revealed a significant increase in heating with increasing density ratio and decreasing Reynolds number at the lower angles of attack; the effects of density ratio and Reynolds number diminished with increasing angle of attack and were relatively small at the angles of attack for the hypersonic portion of Space Shuttle Orbiter flights STS-1 and STS-2. Wind-tunnel and flight heating distributions were in relatively good agreement, and the present heating rates in air were accurately predicted by a local infinite swept cylinder analysis.

Miller, C. G.↗

Numerical simulation of filling a magnetic flux tube with a cold plasma: Anomalous plasma effects

Large-scale models of plasmaspheric refilling have revealed that during the early stage of the refilling counterstreaming ion beams are a common feature. However, the instability of such ion beams and its effect on refilling remain unexplored. In order to learn the basic effects of ion beam instabilities on refilling, we have performed numerical simulations of the refilling of an artificial magnetic flux tube. (The shape and size of the tube are assumed so that the essential features of the refilling problem are kept in the simulation and at the same time the small scale processes driven by the ion beams are sufficiently resolved.) We have also studied the effect of commonly found equatorially trapped warm and/or hot plasma on the filling of a flux tube with a cold plasma. Three types of simulation runs have been performed.

Singh, Nagendra↗

Electric propulsion interactive effects with spacecraft science payloads.

Interactive effects between electric thruster units and a Solar Electric Pioneer (SEP) spacecraft science payload are investigated. Studied effects include magnetic contamination (steady state), electric contamination (steady state and time varying) and particle contamination of regions in and around the spacecraft. Conducted electromagnetic interference is measured for thrusters powered with prototype power processing units and radio frequency interference effects between the thruster and the omnidirectional low gain antenna are determined. Material deposition and transport of thruster propellant ions and atoms and charge exchange metal ions and atoms are also experimentally determined. Large scale environmental effects between the plasma thrust beam and the particles and fields in interplanetary space are discussed. Contaminant reduction techniques are proposed, and both laboratory and in-space interactive effects tests are suggested.

Sellen, J. M., Jr.↗

Global satellite triangulation and trilateration results

Summary of the results of the Ohio State University geometric adjustment for the coordinates at 158 satellite tracking stations. In the solution the origin of the coordinate system is defined through the 'inner' adjustment procedure, whereas the orientation is through the Conventional International Origin and the Greenwich Mean Astronomical Meridian, both as defined by the Bureau International de l'Heure. The scale is implemented through Secor observations and weighted height constraints. Chord distances derived from C-band radar observations and from electronic distance measurements are also included, but they seem to have very little effect. The scale selected corresponds to a best fitting ellipsoid of a = 6,378,142 m and 1/f = 298.25. The average standard deviation of a single coordinate is 3.9 m.

Mueller, I. I.↗

The Effect of Stochastically Varying Creep Parameters on Residual Stresses in Ceramic Matrix Composites

Constituent properties, along with volume fraction, have a first order effect on the microscale fields within a composite material and influence the macroscopic response. Therefore, there is a need to assess the significance of stochastic variation in the constituent properties of composites at the higher scales. The effect of variability in the parameters controlling the time-dependent behavior, in a unidirectional SCS-6 SiC fiber-reinforced RBSN matrix composite lamina, on the residual stresses induced during processing is investigated numerically. The generalized method of cells micromechanics theory is utilized to model the ceramic matrix composite lamina using a repeating unit cell. The primary creep phases of the constituents are approximated using a Norton-Bailey, steady state, power law creep model. The effect of residual stresses on the proportional limit stress and strain to failure of the composite is demonstrated. Monte Carlo simulations were conducted using a normal distribution for the power law parameters and the resulting residual stress distributions were predicted.

residual stress↗

The Effect of Stochastically Varying Creep Parameters on Residual Stresses in Ceramic Matrix Composites

Constituent properties, along with volume fraction, have a first order effect on the microscale fields within a composite material and influence the macroscopic response. Therefore, there is a need to assess the significance of stochastic variation in the constituent properties of composites at the higher scales. The effect of variability in the parameters controlling the time-dependent behavior, in a unidirectional SCS-6 SiC fiber-reinforced RBSN matrix composite lamina, on the residual stresses induced during processing is investigated numerically. The generalized method of cells micromechanics theory is utilized to model the ceramic matrix composite lamina using a repeating unit cell. The primary creep phases of the constituents are approximated using a Norton-Bailey, steady state, power law creep model. The effect of residual stresses on the proportional limit stress and strain to failure of the composite is demonstrated. Monte Carlo simulations were conducted using a normal distribution for the power law parameters and the resulting residual stress distributions were predicted.

processing↗

The three-point function as a probe of models for large-scale structure

We analyze the consequences of models of structure formation for higher order (n-point) galaxy correlation functions in the mildly nonlinear regime. Several variations of the standard Omega = 1 cold dark matter model with scale-invariant primordial perturbations have recently been introduced to obtain more power on large scales, R(sub p) is approximately 20/h Mpc, e.g., low matter-density (nonzero cosmological constant) models, 'tilted' primordial spectra, and scenarios with a mixture of cold and hot dark matter. They also include models with an effective scale-dependent bias, such as the cooperative galaxy formation scenario of Bower et al. We show that higher-order (n-point) galaxy correlation functions can provide a useful test of such models and can discriminate between models with true large-scale power in the density field and those where the galaxy power arises from scale-dependent bias: a bias with rapid scale dependence leads to a dramatic decrease of the the hierarchical amplitudes Q(sub J) at large scales, r is greater than or approximately R(sub p). Current observational constraints on the three-point amplitudes Q(sub 3) and S(sub 3) can place limits on the bias parameter(s) and appear to disfavor, but not yet rule out, the hypothesis that scale-dependent bias is responsible for the extra power observed on large scales.

Frieman, Joshua A.↗

Scaling of the anomalous Hall effect in epitaxial antiperovskite Mn{sub 3.5}Dy{sub 0.5}N involving multiple competing scattering mechanisms

Anomalous Hall effect (AHE) has been studied for ferrimagnetic antiperovskite Mn{sub 3.5}Dy{sub 0.5}N film grown by molecular-beam epitaxy. Reflective high energy electron diffraction and transmission electron microscopy demonstrate the high quality of the film. We have used a scaling involving multiple competing scattering mechanisms to distinguish variations of contributions to the AHE by heavily doped Dy. The scaling analysis revealed that the heavily doped Dy has dramatically modified the skew scattering part of the AHE in Mn{sub 4}N and Mn{sub 3.5}Dy{sub 0.5}N has a totally different scattering mechanism from an undoped film.

36 MATERIALS SCIENCE↗

Digitization of scalar fields for quantum computing

Qubit, operator, and gate resources required for the digitization of lattice λΦ 4 scalar field theories onto quantum computers are considered, building upon the foundational work by Jordan et al. [Quantum Inf. Comput. 14, 1014 (2014); Science 336, 1130 (2012)], with a focus towards noisy intermediate-scale quantum devices. The Nyquist-Shannon sampling theorem, introduced in this context by Macridin et al. [Phys. Rev. A 98, 042312 (2018)] building on the work of Somma [Quantum Inf. Comput. 16, 1125 (2016)], provides a guide with which to evaluate the efficacy of two field-space bases, the eigenstates of the field operator, as used by Jordan et al., and eigenstates of a harmonic oscillator, to describe ( 0 + 1 )- and ( d + 1 )-dimensional scalar field theory. We show how techniques associated with improved actions, which are heavily utilized in lattice QCD calculations to systematically reduce lattice-spacing artifacts, can be used to reduce the impact of the field digitization in λΦ 4 , but are found to be inferior to a complete digitization improvement of the Hamiltonian using a quantum Fourier transform. When the Nyquist-Shannon sampling theorem is satisfied, digitization errors scale as | log | log | ε dig | | | ~ n Q (number of qubits describing the field at a given spatial site) for the low-lying states, leaving the familiar power-law lattice-spacing and finite-volume effects that scale as | log | ε latt | | ~ N Q (total number of qubits in the simulation). For localized (delocalized) field-space wave functions, it is found that n Q ~ 4 ( 7 ) qubits per spatial lattice site are sufficient to reduce theoretical digitization errors below error contributions associated with approximation of the time-evolution operator and noisy implementation on near-term quantum devices. Only classical computing resources have been used to obtain the results presented in this work.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Turbofan engine control system design using the LQG/LTR methodology

Application of the linear-quadratic-Gaussian with loop-transfer-recovery methodology to design of a control system for a simplified turbofan engine model is considered. The importance of properly scaling the plant to achieve the desired target feedback loop is emphasized. The steps involved in the application of the methodology are discussed via an example, and evaluation results are presented for a reduced-order compensator. The effect of scaling the plant on the stability robustness evaluation of the closed-loop system is studied in detail.

Garg, Sanjay↗

Tree-level bispectrum in the effective field theory of large-scale structure extended to massive neutrinos

We compute the tree-level bispectrum of dark matter in the presence of massive neutrinos in the mildly non-linear regime in the context of the effective field theory of large-scale structure (EFTofLSS) . For neutrinos, whose typical free streaming wavenumber (k fs ) is longer than the non-linear scale (k NL ), we solve a Boltzmann equation coupled to the effective fluid equation for dark matter. We solve perturbatively the coupled system by expanding in powers of the neutrino density fraction (fν) and the ratio of the wavenumber of interest over the non-linear scale (k/k NL ) and add suitable counterterms to remove the dependence from short distance physics. For equilateral configurations, we find that the total-matter tree-level bispectrum is approximately 16fν times the dark matter one on short scales (k > k fs ). The largest contribution stems from the back-reaction of massive neutrinos on the dark matter growth factor. As a result, on large scales (k < k fs ) the contribution of neutrinos to the bispectrum is smaller by up to two orders of magnitude.

79 ASTRONOMY AND ASTROPHYSICS↗

Experimental study on vertical scaling of InAs-on-insulator metal-oxide-semiconductor field-effect transistors

We have investigated effects of the vertical scaling on electrical properties in extremely thin-body InAs-on-insulator (-OI) metal-oxide-semiconductor field-effect transistors (MOSFETs). It is found that the body thickness (T{sub body}) scaling provides better short channel effect (SCE) control, whereas the T{sub body} scaling also causes the reduction of the mobility limited by channel thickness fluctuation (δT{sub body}) scattering (μ{sub fluctuation}). Also, in order to achieve better SCEs control, the thickness of InAs channel layer (T{sub channel}) scaling is more favorable than the thickness of MOS interface buffer layer (T{sub buffer}) scaling from a viewpoint of a balance between SCEs control and μ{sub fluctuation} reduction. These results indicate necessity of quantum well channel structure in InAs-OI MOSFETs and these should be considered in future transistor design.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Turbofan engine control system design using the LQG/LTR methodology

Application of the Linear-Quadratic-Gaussian with Loop-Transfer-Recovery methodology to design of a control system for a simplified turbofan engine model is considered. The importance of properly scaling the plant to achieve the desired Target-Feedback-Loop is emphasized. The steps involved in the application of the methodology are discussed via an example, and evaluation results are presented for a reduced-order compensator. The effect of scaling the plant on the stability robustness evaluation of the closed-loop system is studied in detail.

Garg, Sanjay↗

Judgements of relative noisiness of a supersonic transport and several commercial-service aircraft

Two laboratory experiments were conducted on the relative noisiness of takeoff and landing operations of a supersonic transport and several other aircraft in current commercial service. A total of 96 subjects made noisiness judgments on 120 tape-recorded flyover noises in the outdoor-acoustic-simulation experiment; 32 different subjects made judgments on the noises in the indoor-acoustic-simulation experiment. The judgments were made by using the method of numerical category scaling. The effective perceived noise level underestimated the noisiness of the supersonic transport by 3.5 db. For takeoff operations, no difference was found between the noisiness of the supersonic transport and the group of other aircraft for the A-weighted rating scale; however, for landing operations, the noisiness of the supersonic transport was overestimated by 3.7 db. Very high correlation was found between the outdoor-simulation experiment and the indoor-simulation experiment.

Powell, C. A.↗

Review of recent research on the climatic effect of aerosols

A review of recent research on the climatic effects of aerosols is presented. A representative aerosol and climate models were used to study the generation, growth transport, and removal of aerosols. The structure of the radiative-convective models and general circulation models used is described. Large-scale temperature effects, effects on clouds, and local urban effects of trophospheric aerosols are examined. The effects of volcanic eruptions and stratospheric aerosols are also considered. Results indicate that solar radiation backscatter by aerosols increases the planetary albedo. Solar radiation absorption may offset cooling caused by aerosol backscatter but the absorption and emission of terrestrial radiation by aerosols produces a warming effect. It appears that the role of aerosols as cloud condensation nuclei is probably the most significant cause of the radiative effects observed.

Charlock, Thomas P.↗