Search NASA⌕ Search

SEARCH · Search NASA

Results for “selenium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Ab-initio study of the structural, linear and nonlinear optical properties of CdAl{sub 2}Se{sub 4} defect-chalcopyrite

The complex density functional theory (DFT) calculations of structural, electronic, linear and nonlinear optical properties for the defect chalcopyrite CdAl{sub 2}Se{sub 4} compound have been reported using the full potential linearized augmented plane wave (FP-LAPW) method as implemented in the WIEN2k code. We employed the Wu and Cohen generalized gradient approximation (GGA-WC), which is based on exchange-correlation energy optimization to calculate the total energy. Also we have used the Engel-Vosko GGA formalism, which optimizes the corresponding potential for band structure, density of states and the spectral features of the linear and nonlinear optical properties. This compound has a wide direct energy band gap of about 2.927 eV with both the valence band maximum and conduction band minimum located at the center of the Brillouin zone. The ground state quantities such as lattice parameters (a, c, x, y and z), bulk modulus B and its pressure derivative B' are evaluated. We have calculated the frequency-dependent complex epsilon(omega), its zero-frequency limit epsilon{sub 1}(0), refractive index n(omega), birefringence DELTAn(omega), the reflectivity R(omega) and electron energy loss function L(omega). Calculations are reported for the frequency-dependent complex second-order nonlinear optical susceptibilities. We find opposite signs of the contributions of the 2omega and 1omega inter/intra-band to the imaginary part for the dominant component through the wide optical frequency range. - Graphical abstract: Calculated band structure and total density of CdAl{sub 2}Se{sub 4}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Single-crystal structures of uranium and neptunium oxychalcogenides AnOQ (An=U, Np; Q=S, Se)

The compounds UOS, UOSe, NpOS, and NpOSe have been synthesized and their structures determined by means of single-crystal X-ray diffraction methods. The results provide more detailed crystallographic information, including more precise interatomic distances, than earlier determinations from powder diffraction data. These isostructural compounds adopt the PbFCl structure type. Each An atom is surrounded by four O and five Q atoms in a distorted monocapped square-antiprismatic arrangement. - Graphical abstract: View down [010] of the structure of AnOQ.

36 MATERIALS SCIENCE↗

Effect of Fe excess on structural, magnetic and superconducting properties of single-crystalline Fe{sub 1+x}Te{sub 1-y}Se{sub y}

Single crystals of Fe{sub 1+x}Te{sub 1-y}Se{sub y} have been grown with a controlled Fe excess and Se doping, and the crystal structure has been refined for various compositions. The systematic investigation of magnetic and superconducting properties as a function of the structural parameters shows how the material can be driven into various ground states, depending on doping and the structural modifications. Our results prove that the occupation of the additional Fe site, Fe2, enhances the spin localization. By reducing the excess Fe, the antiferromagnetic ordering is weakened, and the superconducting ground state is favored. We have found that both Fe excess and Se doping in synergy determine the properties of the material and an improved 3-dimensional phase diagram is proposed. - Single crystals of Fe{sub 1+x}Te{sub 1-y}Se{sub y} have been grown with a controlled Fe off-stoichiometry and Se doping and the crystal structure has been refined for various compositions, thus proving the effect of both Fe excess and Se-substitutions on the structural properties. Either antiferromagnetic or superconducting ground state is driven by doping and related structural modifications. An improved 3-D phase diagram is proposed.

36 MATERIALS SCIENCE↗

Crystal structure investigations of ZrAs{sub x}Se{sub y} (x>y, x+y{<=}2) by single crystal neutron diffraction at 300 K, 25 K and 2.3 K

Large single crystals of ZrAs{sub x}Se{sub y} (x>y, x+y{<=}2, PbFCl type of structure, space group P4/nmm) were grown by Chemical Transport. Structural details were studied by single crystal neutron diffraction techniques at various temperatures. One single crystal specimen with chemical composition ZrAs{sub 1.595(3)}Se{sub 0.393(1)} was studied at ambient temperature (R1=5.10 %, wR2=13.18 %), and a second crystal with composition ZrAs{sub 1.420(3)}Se{sub 0.560(1)} was investigated at 25 K (R1=2.70%, wR2=5.70 %) and 2.3 K (R1=2.30 %, wR2=4.70 %), respectively. The chemical compositions of the crystals under investigation were determined by wavelength dispersive X-ray spectroscopy. The quantification of trace elements was carried out by Laser Ablation-Inductively Coupled Plasma-Mass Spectrometry. According to the crystal structure refinements the crystallographic 2a site is occupied by As, together with a significant amount of vacancies. One of the 2c sites is fully occupied by As and Se (random distribution). With respect to the fractional coordinates of the atoms, the crystal structure determinations based on the data obtained at 25.0 K and 2.3 K did not show significant deviations from ambient temperature results. The temperature dependence of the displacement parameters indicates a static displacement of As on the 2a sites (located on the (0 0 1) planes) for all temperatures. No indications for any occupation of interstitial sites or the presence of vacancies on the Zr (2a) site were found. - Graphical abstract: Large single crystals of ZrAs{sub x}Se{sub y} grown by Chemical Transport to study structural details as the As-Se order scheme by single crystal neutron diffraction.

36 MATERIALS SCIENCE↗

Syntheses, crystal structures, and properties of three new metal selenites Na{sub 2}Co{sub 2}(SeO{sub 3}){sub 3}, Na{sub 2}Co{sub 1.67}Ni{sub 0.33}(SeO{sub 3}){sub 3}, and Na{sub 2}Ni{sub 2}(SeO{sub 3}){sub 3}

Three new sodium cobalt (nickel) selenite compounds, namely, Na{sub 2}Co{sub 2}(SeO{sub 3}){sub 3}, Na{sub 2}Co{sub 1.67}Ni{sub 0.33}(SeO{sub 3}){sub 3}, and Na{sub 2}Ni{sub 2}(SeO{sub 3}){sub 3} have been hydro-/solvothermally synthesized in the mixed solvents of acetonitrile and water. Single-crystal X-ray diffraction analyses reveal that these isostructural compounds belong to the orthorhombic Cmcm space group and their structures feature three-dimensional open frameworks constructed by the two-dimensional layers of [MSeO{sub 3}] pillared by the [SeO{sub 3}]{sup 2-} groups. The two different types of Na{sup +} ions reside in the intersecting two-dimensional channels parallel to the a- and c-axes, respectively. Their thermal properties have been investigated via TGA-DSC. The magnetic measurements indicate the existence of the antiferromagnetic interactions in these compounds. - Graphical abstract: Three new isostructural metal selenites, Na{sub 2}Co{sub 2}(SeO{sub 3}){sub 3}, Na{sub 2}Co{sub 1.67}Ni{sub 0.33}(SeO{sub 3}){sub 3}, and Na{sub 2}Ni{sub 2}(SeO{sub 3}){sub 3} have been hydro-/solvothermally synthesized and characterized. Their structures feature three-dimensional open frameworks with Na{sup +}-occupied channels.

36 MATERIALS SCIENCE↗

Structural investigation of the Cu{sub 2}Se-In{sub 2}Se{sub 3}-Ga{sub 2}Se{sub 3} phase diagram, X-ray photoemission and optical properties of the Cu{sub 1-z}(In{sub 0.5}Ga{sub 0.5}){sub 1+z/3}Se{sub 2} compounds

Structures of compounds in the Cu{sub 2}Se-In{sub 2}Se{sub 3}-Ga{sub 2}Se{sub 3} system have been investigated through X-ray diffraction. Single crystal structure studies for the so-called stoichiometric compounds Cu(In,Ga)Se{sub 2} (CIGSe) confirm that the chalcopyrite structure (space group I4-bar 2d) is very flexible and can adapt itself to the substitution of Ga for In. On the other hand a structure modification is evidenced in the Cu{sub 1-z}(In{sub 0.5}Ga{sub 0.5}){sub 1+z/3}Se{sub 2} series when the copper vacancy ratio (z) increases; the chalcopyrite structure turns to a modified-stannite structure (I4-bar 2m) when z{>=}0.26. There is a continuous evolution of the structure from Cu{sub 0.74}(In{sub 0.5}Ga{sub 0.5}){sub 1.09}Se{sub 2} to Cu{sub 0.25}(In{sub 0.5}Ga{sub 0.5}){sub 1.25}Se{sub 2} ((i.e. Cu(In{sub 0.5}Ga{sub 0.5}){sub 5}Se{sub 8}), including Cu{sub 0.4}(In{sub 0.5}Ga{sub 0.5}){sub 1.2}Se{sub 2} (i.e. Cu(In{sub 0.5}Ga{sub 0.5}){sub 3}Se{sub 5}). From this single crystal structural investigation, it is definitively clear that no ordered vacancy compound exists in that series. X-ray photoemission spectroscopy study shows for the first time that the surface of powdered Cu{sub 1-z}(In{sub 0.5}Ga{sub 0.5}){sub 1+z/3}Se{sub 2} compounds (z{ne}0) is more copper-poor than the bulk. The same result has often been observed on CIGSe thin films material for photovoltaic applications. In addition, optical band gaps of these non-stoichiometric compounds increase from 1.2 to 1.4 eV when z varies from 0 to 0.75. - Abstract: Pseudo-ternary diagram in the Cu{sub 2}Se-In{sub 2}Se{sub 3}-Ga{sub 2}Se{sub 3} system showing the composition of all the synthesized compounds. The crystal structure of the compounds corresponding to red circles are presented in this study.

36 MATERIALS SCIENCE↗

Synthesis and phase width of new quaternary selenides Pb{sub x}Sn{sub 6-x}Bi{sub 2}Se{sub 9} (x=0-4.36)

Quaternary chalcogenides Pb{sub x}Sn{sub 6-x}Bi{sub 2}Se{sub 9} (x=0-4.36) were synthesized with solid-state methods; their structures were determined from the X-ray diffraction of single crystals. Pb{sub x}Sn{sub 6-x}Bi{sub 2}Se{sub 9} crystallizes in an orthorhombic space group Cmcm (No. 63); the structure features a three-dimensional framework containing slabs of NaCl-(3 1 1) type that exhibits identical layers containing seven octahedra units, which expand along the direction [0 1 0]. Each slab contains fused rectangular units that are connected to each other with M-Se contacts in a distorted octahedral environment. Calculations of the band structure, measurements of Seebeck coefficient and electrical conductivity confirm that these compounds are n-type semiconductors with small band gaps and large electrical conductivities. - Graphical abstract: SYNOPSIS TOC New quaternary selenides, Pb{sub x}Sn{sub 6-x}Bi{sub 2}Se{sub 9} (x=0-4.36), were synthesized and their structure consisting layers of seven octahedra wide slabs expanding along the direction [0 1 0]. Display Omitted

36 MATERIALS SCIENCE↗

Lithium ions in the van der Waals gap of Bi{sub 2}Se{sub 3} single crystals

Insertion/extraction of lithium ions into/from Bi{sub 2}Se{sub 3} crystals was investigated by means of cyclic voltammetry. The process of insertion is reflected in the appearance of two bands on voltammograms at {approx}1.7 and {approx}1.5 V, corresponding to the insertion of Li{sup +} ions into octahedral and tetrahedral sites of the van der Waals gap of these layered crystals. The process of extraction of Li{sup +} ions from the gap results in the appearance of four bands on the voltammograms. The bands 1 and 2 at {approx}2.1 and {approx}2.3 V correspond to the extraction of a part of Li{sup +} guest ions from the octahedral and tetrahedrals sites and this extraction has a character of a reversible intercalation/deintercalation process. A part of Li{sup +} ions is bound firmly in the crystal due to the formation of negatively charged clusters of the (LiBiSe{sub 2}.Bi{sub 3}Se{sub 4}{sup -}) type. A further extraction of Li{sup +} ions from the van der Waals gap is associated with the presence of bands 3 and 4 placed at {approx}2.5 and {approx}2.7 V on the voltammograms as their extraction needs higher voltage due to the influence of negative charges localized on these clusters. -- Graphical abstract: Insertion/extraction of lithium ions into/from Bi{sub 2}Se{sub 3} layered crystals was investigated by cyclic voltammetry. The extraction of Li{sup +} results in the appearance of four bands on the voltammograms. The first two bands have a character of a reversible process. A part of Li{sup +} ions is bound firmly in the crystal due to the formation of negatively charged clusters of the (LiBiSe{sub 2}.Bi{sub 3}Se{sub 4}{sup -}) type. Their extraction needs higher voltage due to the negative charge. Display Omitted

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure and vibrational modes of AgI-doped AsSe glasses: Raman scattering and ab initio calculations

We report an investigation of the structure and vibrational modes of (AgI){sub x} (AsSe){sub 100-x}, bulk glasses using Raman spectroscopy and first principles calculations. The short- and medium-range structural order of the glasses was elucidated by analyzing the reduced Raman spectra, recorded at off-resonance conditions. Three distinct local environments were revealed for the AsSe glass including stoichiometric-like and As-rich network sub-structures, and cage-like molecules (As{sub 4}Se{sub n}, n=3, 4) decoupled from the network. To facilitate the interpretation of the Raman spectra ab initio calculations are employed to study the geometric and vibrational properties of As{sub 4}Se{sub n} molecular units that are parts of the glass structure. The incorporation of AgI causes appreciable structural changes into the glass structure. AgI is responsible for the population reduction of molecular units and for the degradation of the As-rich network-like sub-structure via the introduction of As-I terminal bonds. Ab initio calculations of mixed chalcohalide pyramids AsSe{sub m}I{sub 3-m} provided useful information augmenting the interpretation of the Raman spectra. -- Graphical abstract: Raman scattering and ab initio calculations are employed to study the structure of AgI-AsSe superionic glasses. The role of mixed chalcohalide pyramidal units as illustrated in the figure is elucidated. Display Omitted Research highlights: {yields} Doping binary As-Se glasses with AgI cause dramatic changes in glass structure. {yields} Raman scattering and ab initio calculations determine changes in short- and medium-range order. {yields} Three local environments exist in AsSe glass including a network sub-structure and cage-like molecules. {yields} Mixed chalcohalide pyramids AsSe{sub m}I{sub 3-m} dominate the AgI-doped glass structure.

36 MATERIALS SCIENCE↗

Palladium site ordering and the occurrence of superconductivity in Bi{sub 2}Pd{sub 3}Se{sub 2-x}S{sub x}

The crystallographic and electronic structures of compounds related to parkerite (Bi{sub 2}Ni{sub 3}S{sub 2}) are investigated with respect to the recently reported occurrence (Bi{sub 2}Pd{sub 3}Se{sub 2}) and absence (Bi{sub 2}Pd{sub 3}S{sub 2}) of superconductivity. Similarities and differences of the crystal structures are discussed within the series of solid solutions Bi{sub 2}Pd{sub 3}S{sub 2-x}Se{sub x} from powder and single crystal diffraction data. From crystal structure refinements, the question of different structures and settings of parkerite is discussed. Similar and different 2D and 3D partial Pd-Ch (Ch=S, Se) structures are related to half antiperovskite ordering schemes. To investigate the relation of low dimensional structures and the occurrence of superconductivity, electronic structures are analyzed by scalar-relativistic DFT calculations, including site projected DOS, ECOV and Fermi surfaces. -- Graphical abstract: Structure relations for perovskite type BiPd{sub 3}C, BiPd{sub 3/2}Se and BiPd{sub 3/2}S. Display Omitted Research highlights: {yields} Merging crystallographic and electronic structures studies to understand chalcogenides related to parkerite (Bi{sub 2}Ni{sub 3}S{sub 2}). {yields} Investigation in view of recently reported occurrence (Bi{sub 2}Pd{sub 3}Se{sub 2}) and absence (Bi{sub 2}Pd{sub 3}S{sub 2}) of superconductivity. {yields} Relationship of half perovskites with perovskites.

36 MATERIALS SCIENCE↗

Seed-mediated synthesis, properties and application of {gamma}-Fe{sub 2}O{sub 3}-CdSe magnetic quantum dots

Seed-mediated growth of fluorescent CdSe quantum dots (QDs) around {gamma}-Fe{sub 2}O{sub 3} magnetic cores was performed at high temperature (300 deg. C) in the presence of organic surfactants. Bi-functional magnetic quantum dots (MQDs) with tunable emission properties were successfully prepared. The as-synthesized MQDs were characterized by high-resolution transmission electron microscopy (HRTEM) and dynamic light scattering (DLS), which confirmed the assembly of heterodimers. When a longer growth period was employed, a homogeneous dispersion of QDs around a magnetic nanoparticle was obtained. The magnetic properties of these nanocomposites were examined. The MQDs were superparamagnetic with a saturation magnetization of 0.40 emu/g and a coercivity of 138 Oe at 5 K. To demonstrate their potential application in bio-labeling, these MQDs were coated with a thin silica shell, and functionalized with a polyethylene glycol (PEG) derivative. The functionalized MQDs were effectively used for the labeling of live cell membranes of 4T1 mouse breast cancer cells and HepG2 human liver cancer cells. - Graphical abstract: (a) HRTEM image of oleic acid capped MPs. The size of MPs ranges from 8 to 10 nm. (b) XRD pattern of {gamma}-Fe{sub 2}O{sub 3} MPs. Highlights: > The fabrication of MQDs through a seed-mediated approach has been demonstrated. > The formation and assembly of these bi-functional nanocomposites have been elucidated. > The MQDs exhibit superparamagnetism and tunable emissions characteristic of the components. > MQDs with thin silica coating were successfully employed in the labeling of cancer cell membranes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal and electronic structure study of AgPd{sub 3}Se

The AgPd{sub 3}Se compound was synthesised from individual elements by solid-state chemical reactions and structurally characterized by powder X-ray diffraction data. AgPd{sub 3}Se displays cubic symmetry, space group Pa3-bar , unit cell parameter a=8.6289(1) A and Z=8. Double-Friauf polyhedra (DFP), defined by Pd and Se atoms, form the basic structural building block of the AgPd{sub 3}Se crystal structure. The Ag atoms occupy the centres of DFPs forming an Ag-Ag dimer (2.792(2) A). The packing of DFPs forms two kinds of interpenetrating networks that show similar features as three-dimensional Penrose tiles. AgPd{sub 3}Se is isostructural with CaAu{sub 3}Ga. The electric resistivity as well as the electronic structure calculation suggests metallic behaviour. - Graphical abstract: (a) Prolate rhombohedron formed by Pd and Se atoms, (b) oblate rhombohedron formed by Ag atoms and (c) their interpenetration at unit cell level. (d) 3D network of prolate and oblate rhombohedra. Highlights: > Crystal structure of AgPd{sub 3}Se was determined from powder X-ray diffraction data. > Double-Friauf polyhedra form the basic structural block of the AgPd{sub 3}Se structure. > Packing of double-Friauf polyhedra produces two kinds of interpenetrating networks. > Metallic behavior was observed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Syntheses and crystal structures of the quaternary uranium lanthanide oxyselenides UYb{sub 2}O{sub 2}Se{sub 3} and U{sub 2}Ln{sub 2}O{sub 4}Se{sub 3} (Ln=Pr, Sm, Gd)

Single crystals of the new uranium lanthanide oxyselenide compounds UYb{sub 2}O{sub 2}Se{sub 3} and U{sub 2}Ln{sub 2}O{sub 4}Se{sub 3} (Ln=Pr, Sm, Gd) have been synthesized from an Sb{sub 2}Se{sub 3} flux. The structures have been determined from single-crystal X-ray diffraction data. UYb{sub 2}O{sub 2}Se{sub 3} is isostructural to UYb{sub 2}O{sub 2}S{sub 3}. The structure comprises layers of edge-sharing YbSe{sub 6} octahedra and double layers of disordered (U/Ln)O{sub 4}Se{sub 4} square antiprisms. The U{sub 2}Ln{sub 2}O{sub 4}Se{sub 3} (Ln=Pr, Sm, Gd) compounds are isostructural to U{sub 2}Ln{sub 2}O{sub 4}S{sub 3} (Ln=La-Gd) whose structure had been deduced previously from X-ray powder diffraction data. In the structure a dodecahedron of four O atoms and four Se atoms surrounds a site primarily occupied by U and a distorted bicapped octahedron of five Se atoms and three O atoms surrounds a site primarily occupied by the lanthanide. These compounds represent the first examples of quaternary uranium oxyselenides. - Graphical abstract: The U{sub 2}Ln{sub 2}O{sub 4}Se{sub 3} (Ln=Pr, Sm, Gd) structure: primarily U sites are in black, primarily Ln sites are in blue, O red, Se orange. Highlights: Black-Right-Pointing-Pointer Single crystals of the new compounds UYb{sub 2}O{sub 2}Se{sub 3} and U{sub 2}Ln{sub 2}O{sub 4}Se{sub 3} (Ln=Pr, Sm, Gd) have been synthesized. Black-Right-Pointing-Pointer These compounds represent the first examples of quaternary uranium oxyselenides. Black-Right-Pointing-Pointer U is surrounded by a dodecahedron or square prism of four O atoms and four Se atoms

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Controlling morphology and crystallite size of Cu(In{sub 0.7}Ga{sub 0.3})Se{sub 2} nano-crystals synthesized using a heating-up method

CuIn{sub 0.7}Ga{sub 0.3}Se{sub 2}(CIGS) nano-crystals were successfully synthesized via a heating-up process. The non-coordinating solvent (1-octadecene) and selenium/cations ratio effects on the crystalline phase and crystallite size of CIGS nano-crystallites were investigated. It was observed that the CIGS nano-crystallite morphology changed from sheet into spherical shape as the amount of 1-octadecene addition was increased. CIGS nano-crystals were obtained in 9–20 nm sizes as the selenium/cations ratio increased. These results suggest that the monomer reactivity in the solution can be adjusted by changing the solvent type and selenium/cations ratio, hence affecting the crystallite size and distribution. - Graphical abstract: CuIn{sub 0.7}Ga{sub 0.3}Se{sub 2}(CIGS) nano-crystals were successfully synthesized via a heating-up process in this study. The super-saturation in the solution can be adjusted by changing the OLA/ODE ratio and selenium/cation ratio.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Syntheses, crystal and band structures, and optical properties of a selenidoantimonate and an iron polyselenide

A new selenidoantimonate (CH{sub 3}NH{sub 4})[Mn(phen){sub 2}](SbSe{sub 4})·phen (1, phen=1,10-phenanthroline) and an iron polyselenide [Fe(phen){sub 2}](Se{sub 4}) (2) were obtained under hydro(solvo)thermal conditions. Compound 1 represents the first example of a selenidoantimonate anion as a ligand to a transition-metal π-conjugated ligand complex cation. Compound 2 containing a κ{sup 2}Se{sup 1},Se{sup 4} chelating tetraselenide ligand, represents the only example of a tetraselenide ligand to a Fe complex cation. Compounds 1 and 2 exhibit optical gaps of 1.71 and 1.20 eV, respectively and their thermal stabilities have been investigated by thermogravimetric analyses. The electronic band structure along with the density of states calculated by the DFT method indicate that the optical absorptions mainly originate from the charge transitions from the Se 4p and Mn 3d states to the phen p–π{sup ⁎} orbital for 1 and the Se 4p and Fe 3d states to the phen p–π{sup ⁎} orbital for 2. - Graphical abstract: Two metal–Se complexes, representing the only example of a selenidoantimonate ligand to a TM π-conjugated ligand complex, and a tetraselenide ligand to a Fe complex cation, were synthesized. - Highlights: • The first π-conjugated ligand complex containing selenidoantimonate was isolated. • The first example of a tetraselenide ligand to a Fe complex cation was reported. • We found that phen can adjust the optical band gaps of metal–Se complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, structure and properties of layered iron-oxychalcogenides Nd{sub 2}Fe{sub 2}Se{sub 2−x}S{sub x}O{sub 3}

A new series of sulfur-substituted iron-oxychalcogenides Nd{sub 2}Fe{sub 2}Se{sub 2−x}S{sub x}O{sub 3} (0≤x≤0.4) was synthesized by solid state reaction method, and investigated by structure, transport, magnetic and specific heat measurements. The compounds crystallize in the layered tetragonal structure with I4/mmm space group, and show semiconducting behavior. The large discrepancy between the activation energies for conductivity, E{sub ρ} (152–202 meV), and thermopower, E{sub S} (15.6–39.8 meV), indicates the polaronic transport mechanism of the carrier. The parent compound Nd{sub 2}Fe{sub 2}Se{sub 2}O{sub 3} exhibits a frustrated antiferromagnetic (AFM) ground state, and the S-substitution induces an enhanced ferromagnetic (FM) component and possible increased degree of frustration. - Graphical abstract: The crystal structure of Nd{sub 2}Nd{sub 2}Fe{sub 2}Se{sub 2−x}S{sub x}O{sub 3} is built up by stacking fluorite-like Nd{sub 2}O{sub 2} layers and anti-CuO{sub 2}-type Fe{sub 2}O(Se/S){sub 2} layers with Fe{sup 2+} cations coordinated by two in-plane O{sup 2-} and four Se{sup 2-} above and below the square Fe{sub 2}O plane. - Highlights: • We have synthesized a new series of layered iron-oxychalcogenides Nd{sub 2}Fe{sub 2}Se{sub 2−x}S{sub x}O{sub 3}. • They crystallize in layered tetragonal structure and show semiconducting behavior. • The transport analysis indicates the polaronic transport mechanism of the carrier. • The parent compound shows a frustrated antiferromagnetic (AFM) ground state. • The S-substitution induces an enhanced ferromagnetic (FM) component.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Short- and medium-range order in Sb–Se glasses

Neutron diffraction measurements were performed to investigate the structure of Sb{sub x}Se{sub 100−x} bulk glasses with x=5, 10, 15, 20 and 25 at% Sb. The total pair distribution functions show two peaks at 2.36 Å and 2.64 Å, which are attributed to Se–Se and Sb–Se bonds, respectively. The coordination numbers calculated from these peaks indicate that Sb atoms are three-coordinated and Se atoms are two-coordinated for all the above compositions. However, the composition dependences of the first two peaks in the structure factors show an obvious change between 15 and 20 at% Sb, indicating that the medium-range structure is changed in this range of Sb content. In order to elucidate the medium-range structure, reverse Monte Carlo simulation was used with coordination number constraints. The structure models consisting of a mixture of the SbSe{sub 3/2} network and Se{sub n} chain clusters were in good agreement with neutron diffraction data for Se-rich glass (5, 10 and 15 at% Sb). On the other hand, a better fit was obtained for Sb{sub 25}Se{sub 75} glass with a model based on the network structure formed by connected SbSe{sub 3} units. - Graphical abstract: A 50 Å slice of the RMC configuration for Sb{sub 15}Se{sub 85} glass. - Highlights: • Sb atoms are three-coordinated and Se atoms are two-coordinated. • The medium-range structure changes between 15 and 20 at%. • The phase-separation tendency is observed in Se-rich glasses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrical and thermal transport properties of layered Bi{sub 2}YO{sub 4}Cu{sub 2}Se{sub 2}

Bi{sub 2}YO{sub 4}Cu{sub 2}Se{sub 2} possesses a low thermal conductivity and high electrical conductivity at room temperature, which was considered as a potential thermoelectric material. In this work, we have investigated the electrical and thermal transport properties of Bi{sub 2}YO{sub 4}Cu{sub 2}Se{sub 2} system in the temperature range from 300 K to 873 K. We found that the total thermal conductivity decreases from ~1.8 W m{sup −1} K{sup −1} to ~0.9 W m{sup −1} K{sup −1}, and the electrical conductivity decreases from ~850 S/cm to ~163 S/cm in the measured temperature range. To investigate how potential of Bi{sub 2}YO{sub 4}Cu{sub 2}Se{sub 2} system, we prepared the heavily Iodine doped samples to counter-dope intrinsically high carrier concentration and improve the electrical transport properties. Interestingly, the Seebeck coefficient could be enhanced to ~+80 μV/K at 873 K, meanwhile, we found that a low thermal conductivity of ~0.7 W m{sup −1} K{sup −1} could be achieved. The intrinsically low thermal conductivity in this system is related to the low elastic properties, such as Young's modulus of 70–72 GPa, and Grüneisen parameters of 1.55–1.71. The low thermal conductivity makes Bi{sub 2}YO{sub 4}Cu{sub 2}Se{sub 2} system to be a potential thermoelectric material, the ZT value ~0.06 at 873 K was obtained, a higher performance is expected by optimizing electrical transport properties through selecting suitable dopants, modifying band structures or by further reducing thermal conductivity through nanostructuring etc. - Highlights: • The total thermal conductivity decreases from 1.8 to 0.9 Wm{sup –1}K{sup –1} at 300–873K. • The electrical conductivity decreased from 850 to 163 S/cm at 300–873K. • The Seebeck coefficients were enhanced through heavily Iodine doping. • The ZT ~0.06 at 873K suggests that Bi{sub 2}YO{sub 4}Cu{sub 2}Se{sub 2} systems are potential thermoelectrical materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗