Search NASA⌕ Search

SEARCH · Search NASA

Results for “semiconductor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Inter atomic force constants of binary and ternary tetrahedral semiconductors

In this paper, we present the expressions relating the inter atomic force constants like as bond-stretching force constant (α in N/m) and bond-bending force constant (β in N/m) for the binary (zinc blende structure) and ternary (chalcopyrite structure) semiconductors with the product of ionic charges (PIC) and crystal ionicity (f{sub i}). Interatomic force constants of these compounds exhibit a linear relationship; when plot a graph between Interatomic force constants and the nearest neighbor distance d (Å) with crystal ionicity (f{sub i}), but fall on different straight lines according to the product of ionic charges of these compounds. A fairly good agreement has been found between the observed and calculated values of the α and β for binary and ternary tetrahedral semiconductors.

36 MATERIALS SCIENCE↗

Features of conductivity mechanisms in heavily doped compensated V{sub 1–x}Ti{sub x}FeSb Semiconductor

The crystal and electronic structure and also the energy and kinetic properties of n-VFeSb semiconductor heavily doped with the Ti acceptor impurity are investigated in the temperature and Ti concentration ranges of T = 4.2–400 K and N{sub A}{sup Ti} ≈ 9.5 × 10{sup 19}–3.6 × 10{sup 21} cm{sup –3} (x = 0.005–0.20), respectively. The complex mechanism of the generation of acceptor and donor structural defects is established. It is demonstrated that the presence of vacancies at Sb atomic sites in n-VFeSb gives rise to donor structural defects (“a priori doping”). Substitution of the Ti dopant for V in VFeSb leads simultaneously to the generation of acceptortype structural defects, a decrease in the number of donor defects, and their removal in the concentration range of 0 ≤ x ≤ 0.03 via the occupation of vacancies by Sb atoms, and the generation of donor defects due to the occurrence of vacancies and an increase in their number. The result obtained underlies the technique for fabricating new n-VFeSb-based thermoelectric materials. The results are discussed in the context of the Shklovsky–Efros model for a heavily doped compensated semiconductor.

36 MATERIALS SCIENCE↗

Ultrafast Dynamics of Photoinduced Electron–Hole Plasma in Semiconductor Nanowires

Experimental results obtained in a study of the effect of electron–hole plasma on the generation of terahertz (THz) radiation in semiconductor nanowires grown by metal-organic vapor-phase epitaxy (MOVPE) are presented. It is shown that the temporal dynamics of photoexcited charge carriers in semiconductor nanowires is determined by the transport of carriers, both electrons and holes, and by the time of capture of electrons and holes at surface levels.

36 MATERIALS SCIENCE↗

Matrix Calculation of the Spectral Characteristics of AII–BVI Semiconductors Doped with Iron-Group Ions

A method for the matrix calculation of the spectral characteristics of AII–BVI semiconductors doped with iron-group ions is proposed, which takes into account all possible interactions in the ion and the effect of intramolecular surrounding fields of different symmetries. A technique for calculating the oscillator strength on the basis of eigenfunctions of the resulting states of 3d{sup 7}, 3d{sup 8}, and 3d{sup 6} electron configurations is developed. The spectral regularities of the Co{sup 2+}, Ni{sup 2+}, and Fe{sup 2+} energy structures for the ZnO, ZnS, ZnSe, ZnTe, CdO, CdS, CdSe, and CdTe materials are studied. All possible spectral bands in iron-group ions implanted in AII–BVI semiconductors in the range of 1.3–3 μm are established. The possibility of implementing the laser effect on these materials is estimated.

36 MATERIALS SCIENCE↗

Polarization Properties of Photoluminescence of Anisotropic Polymer Films Containing Aligned Au Nanorods and Semiconductor Nanoparticles of Various Shape

Anisotropic polymer films containing aligned Au nanorods and semiconductor nanoparticles of various shape were fabricated. The photoluminescence of semiconductor nanoparticles in these films is partially polarized. The value of the photoluminescence polarization degree of quantum dots embedded in an anisotropic PVA-film after 4.5-fold stretching P = 0.27 has been obtained.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mechanism and Features of Field Emission in Semiconductors

The field electron emission from individual grains on the surface of Si and III–V semiconductors, namely, gallium arsenide, indium arsenide, and indium antimonide is investigated by scanning tunneling microscopy. From the correspondence of the functional dependence of the I–V characteristic to the theory, the emission mechanism is determined as direct tunneling through a depleted or enriched subsurface layer at the voltages V < 1 V and the tunneling emission from the surface electronic states at the voltages V > 1 V. A field-emission threshold of (1–5) × 10{sup 6} V/cm is obtained, which is significantly lower than the values for metals and carbon. The determining factors of this emission mechanism are the Schottky effect, the localization and size quantization of “light” electrons in the surface area of III–V semiconductors, and the presence of a subsurface depletion layer in silicon. According to the data obtained for the values of the field-emission threshold, indium antimonide in the form of submicron grain particles is the most efficient field emitter.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermoelectric Properties of Semimetal and Semiconductor Bi{sub 1 –x}Sb{sub x} Foils and Wires

The results of experimental investigations into the thermoelectric properties (electrical conductivity, thermoelectric power, and thermal conductivity) of microtextured foils and single-crystal wires based on semimetal and semiconductor Bi{sub 1 –x}Sb{sub x} alloys are presented in the temperature range of 4.2–300 K. It is found that the band gap ΔE in Bi–17 at % Sb wires increases with decreasing wire diameter d, which is a manifestation of the quantum-size effect. At low temperatures (T < 50 K), in the wires with d < 400 nm, the electrical conductivity increases due to the significant contribution of highly conductive surface states characteristic of topological insulators. It is found for the first time that the thermal conductivity of semimetal Bi–3 at % Sb foils at low temperatures is two orders of magnitude lower, and that of semiconductor Bi–16 at % Sb foils one order of magnitude lower, than that in bulk samples of the corresponding composition due to significant phonon scattering at grain boundaries and surfaces. This effect leads to considerable enhancement of the thermoelectric figure-of-merit ZT and can be used in miniature low-temperature thermoelectric energy converters.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Exciton Spectroscopy of Semiconductors by the Method of Optical Harmonics Generation (Review)

Nonlinear optical phenomena are widely used for the study of semiconductor materials. The paper presents an overview of experimental and theoretical studies of excitons by the method of optical second and third harmonics generation in various bulk semiconductors (GaAs, CdTe, ZnSe, ZnO, Cu{sub 2}O, (Cd,Mn)Te, EuTe, EuSe), and low-dimensional heterostructures ZnSe/BeTe. Particular attention is paid to the role of external electric and magnetic fields that modify the exciton states and induce new mechanisms of optical harmonics generation. Microscopic mechanisms of harmonics generation based on the Stark effect, the spin and orbital Zeeman effects, and on the magneto-Stark effect specific for excitons moving in an external magnetic field are considered. This approach makes it possible to study the properties of excitons and to obtain new information on their energy and spin structure that is not available when the excitons are investigated by linear optical spectroscopy. As a result of these studies, a large amount of information was obtained, which allows us to conclude on the establishing of a new field of research—exciton spectroscopy by the method of optical harmonics generation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Localization of the Wannier–Mott Exciton on a Langmuir-Film/CdS Organic Semiconductor Interface

The low-temperature (T = 2 K) light reflectance spectra of organic semiconductor structures produced by depositing Langmuir–Blodgett films on a cadmium sulfide (CdS) crystal surface are studied. The spectra were studied in the region of the resonant frequency of the exciton state A{sub n} {sub = 1} in CdS. The spectra were analyzed within a multilayer medium model with allowance for the spatial dispersion and an exciton-free “dead” layer near the crystal surface contacting with the film. A conclusion is made that, as a result of the deposition of an organic film on a semiconductor crystal surface, the Wanier–Mott exciton is spatially localized near the film–crystal interface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomic Force Microscopy Measurement of the Resistivity of Semiconductors

The surface of silicon substrates has been studied experimentally and theoretically by the method of atomic force microscopy spreading resistance imaging, and measuring techniques for the spreading resistance of semiconductors have been developed based on these data. It has been shown that the resistivity of silicon can be determined reliably if the force with which the probe is pressed against the substrate exceeds some threshold. The influence of the environment on the values of currents in the probe–substrate system has been studied. It has been found that the electrical performance of semiconductors can be properly determined by atomic force microscopy spreading resistance imaging under high-vacuum conditions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Features of the Frequency Dependence of Capacitance–Voltage Characteristics of a Semiconductor Structure of a Photoelectric Converter Based on a p–n Junction with an Antireflective Film of Porous Silicon

The frequency dependence of capacitance–voltage characteristics of a semiconductor structure with an antireflective film of porous silicon, which was formed by electrochemical etching above a p–n junction, is studied. Photoluminescence spectra of layers of porous silicon of the experimental samples are also examined. It is demonstrated that the capacitance–voltage curves are shaped by competing influences of capacitances of the p–n junction and the surface structure forming in a porous Si film due to its inhomogeneity. A structural model of layers of the studied semiconductor structure and a capacitance equivalent circuit are proposed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mechanisms of Current Transfer in Electrodeposited Layers of Submicron Semiconductor Particles

Current–voltage (I–V) characteristics of conductance in multigrain layers of submicron particles of silicon, gallium arsenide, indium arsenide, and indium antimonide have been studied. Nanoparticles of all semiconductors were obtained by processing initial single crystals in a ball mill and applied after sedimentation onto substrates by means of electrodeposition. Detailed analysis of the I–V curves of electrodeposited layers shows that their behavior is determined by the mechanism of intergranular tunneling emission from near-surface electron states of submicron particles. Parameters of this emission process have been determined. The proposed multigrain semiconductor structures can be used in gas sensors, optical detectors, IR imagers, etc.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Plasma Reflection in Multigrain Layers of Narrow-Bandgap Semiconductors

Qualitatively similar spectral characteristics of plasma-resonance reflection in the region of 15–25 μm were obtained for layers of electrodeposited submicron particles of InSb, InAs, and GaAs and plates of these semiconductors ground with M1-grade diamond powder. The most narrow-bandgap semiconductor InSb (intrinsic absorption edge ∼7 μm) is characterized by an absorption band at 2.1–2.3 μm, which is interpreted in terms of the model of optical excitation of electrons coupled by the Coulomb interaction. The spectra of a multigrain layer of chemically deposited PbS nanoparticles (50–70 nm) exhibited absorption maxima at 7, 10, and 17 μm, which can be explained by electron transitions obeying the energy-quantization rules for quantum dots.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Conversion of Semiconductor Nanoparticles to Plasmonic Materials by Targeted Substitution of Surface-Bound Organic Ligands

Plasmonic nanoparticles have become a popularly accepted research tool in optoelectronics, photonics, and biomedical applications. The relatively recently appearing semiconductor plasmonic nanoparticles, as opposed to metal ones, are characterized by infrared plasmonic optical transitions and their application has a great future. In this work, the possibility of conversion of semiconductor (excitonic) fluorescence nanocrystals, i.e., quantum dots of the CuInS{sub 2} composition, to plasmonic nanoparticles by postsynthetic treatment without changes in the chemical composition of inorganic part of the nanocrystals was demonstrated for the first time ever.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

An Asymptotic Preserving Discontinuous Galerkin Method for a Linear Boltzmann Semiconductor Model

A key property of the linear Boltzmann semiconductor model is that as the collision frequency tends to infinity, the phase space density $f$ = $f$ ($x, v, t$) converges to an isotropic function $M (v)$$ρ$$(x, t)$, called the drift-diffusion limit, where $M$ is a Maxwellian and the physical density $ρ$ satisfies a second-order parabolic PDE known as the drift-diffusion equation. Numerical approximations that mirror this property are said to be asymptotic preserving. In this paper we build a discontinuous Galerkin method to the semiconductor model, and we show this scheme is both uniformly stable in $ε$, where 1/$ε$ is the scale of the collision frequency, and asymptotic preserving. Here in particular, we discuss what properties the discrete Maxwellian must satisfy in order for the schemes to converge in $ε$ to an accurate $h$-approximation of the drift-diffusion limit. Discrete versions of the drift-diffusion equation and error estimates in several norms with respect to $ε$ and the spacial resolution are also included.

97 MATHEMATICS AND COMPUTING↗

Pseudopotential Theory of Electronic Excitations in Semiconductor Nanostructures

The calculation of the optical and electronic properties of semiconductor nanostructures is still based for the most part on highly approximated, continuum-like models such as the effective-mass approximation, which do not take into account the atomistic structure of the nanostructures. We present here an atomistic pseudopotential approach to the calculation of excited states in semiconductor nanostructures. The single-particle Schroedinger equation is solved using O(N) methods. The electronic excited states (such as excitons, charged excitons, multi-excitons, etc.) are then calculated by solving the many-particle Schroedinger equation in a basis set of Slater determinants obtained by promoting one or more electrons from the valence band to the conductions band (configuration interaction expansion). Applications of this method to predict the excitonic fine structure and the optical emission spectra of neutral and charged excitons, bi-excitons, and tri-excitons in CdSe colloidal nanocrystals are presented.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Excitons in atomically thin 2D semiconductors and their applications

The research on emerging layered two-dimensional (2D) semiconductors, such as molybdenum disulfide (MoS 2 ), reveals unique optical properties generating significant interest. Experimentally, these materials were observed to host extremely strong light-matter interactions as a result of the enhanced excitonic effect in two dimensions. Thus, understanding and manipulating the excitons are crucial to unlocking the potential of 2D materials for future photonic and optoelectronic devices. Here in this review, we unravel the physical origin of the strong excitonic effect and unique optical selection rules in 2D semiconductors. In addition, control of these excitons by optical, electrical, as well as mechanical means is examined. Finally, the resultant devices such as excitonic light emitting diodes, lasers, optical modulators, and coupling in an optical cavity are overviewed, demonstrating how excitons can shape future 2D optoelectronics.

36 MATERIALS SCIENCE↗

Optically Active 3-Dimensional Semiconductor Quantum Dot Assemblies in Heterogeneous Nanoscale Hosts

Synthesis of semiconductor nanomaterials by low-cost, solution-based methods is shown to lead to new classes of thin film light emitting materials. These materials have been integrated to demonstrative compact laser device testbeds to illustrate their potential for coherent emitters across the visible spectrum to disrupt established photonics technologies, particularly semiconductor lasers?

36 MATERIALS SCIENCE↗