Search NASA⌕ Search

SEARCH · Search NASA

Results for “shape approximation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Investigation of arcjet nozzle performance

An investigation is performed to examine the feasibility of improving arcjet performance through the use of contoured nozzle designs. The results of preliminary experiments performed on two different nozzle configurations, a 19 degree half-angle cone and a 'bell' shaped nozzle, are described. A unique experimental arcjet apparatus, which effectively tests only the change in nozzle contour on arcjet performance is used in this investigation. The preliminary experimental results indicate approximately an 8 percent improvement in thrust and specific impulse for operation at 15 kW with an ammonia flow rate of 0.20 g/s for a 'bell' shaped nozzle compared to a conical nozzle.

Brophy, J. R.↗

Stratospheric Meteorological Conditions for the 3-12 Nov. 1994 ATMOS/ATLAS-3 Measurements

During the ATLAS-3 mission (3-12 Nov 1994), United Kingdom Meteorological Office fields show that the SH vortex was still strong below about 700 K (approximately 16 hPa), with coherent vortex fragments apparent up to about 1300 K (approximately 3 hPa). The SH vortex was shifted off the pole toward 270 deg E throughout ATLAS-3, although its shape varied from day to day. SH temperatures were increasing during ATLAS-3; temperatures below 188 K were last seen 35-45 days before the mission, but were below 195 K as late as 2 Nov 1994. The NH polar vortex had developed at levels above about 550 K (approximately 35 hPa). Simulated high-resolution potential vorticity (PV) fields clearly show low latitude air being drawn up around the polar vortices in both hemispheres. These fields indicate that meteorological analyses underestimate the amount of atmospheric variability, including the strength of local PV gradients, and small-scale structure. Structure such as that in the simulated fields can result in apparent discrepancies between tracer measurements and PV fields.

Manney, G. L.↗

Characterization of a Silicon photo-multiplier summing breakout board for photo-multiplier tube replacement

We present the relative timing and pulse-shape discrimination performance of a H1949-50 photomultiplier tube to SensL ArrayX-B0B6_64S coupled to a SensL ArrayC-60035-64P- PCB Silicon Photomultiplier array. The goal of this work is to enable the replacement of photomultiplier readout of scintillators with Silicon Photomultiplier devices, which are more robust and have higher particle detection efficiency. The report quantifies the degradation of these performance parameters using commercial off the shelf summing circuits, and motivates the development of an improved summing circuit: the pulse-shape descrimination figure-of-merit drops from 1.7 at 500 keVee to 1.4, and the timing resolution (σ) is 288 ps for the photomultiplier readout and approximately 1 ns for the Silicon Photomultiplier readout. A degradation of this size will have a large negative impact on any device that relies on timing coincidence or pulse-shape discrimination to detect neutron interactions, such as neutron kinematic imaging or multiplicity measurements.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Off-center blast in a shocked medium

When multiple blasts occur at different times, the situation arises in which a blast wave is propagating into a medium that has already been shocked. Determining the evolution in shape of the second shock is not trivial, as it is propagating into air that is not only non-uniform, but also non-stationary. To accomplish this task, we employ the method of Kompaneets to determine the shape of a shock in a non-uniform media. We also draw from the work of Korycansky [1] on an off-center explosion in a medium with radially varying density. Extending this to treat non-stationary flow, and making use of approximations to the Sedov solution for the point blast problem, we are able to determine an analytic expression for the evolving shape of the second shock. Specifically, we consider the case of a shock in air at standard ambient temperature and pressure, with the second shock occurring shortly after the original blast wave reaches it, as in a sympathetic detonation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Time-Dependent Density Functional Theory Description of 238 U⁡(n,f), 240,242 Pu⁢(n,f), and 237 Np(n,f) Reactions

In nuclei with an odd nucleon number the nonvanishing spin number density is the source of a pseudomagnetic field, which favors the splitting of the nucleon Cooper pairs. Such a pseudomagnetic field is generated always in the dynamics of any nucleus, but its effects on Cooper pairs are significantly enhanced in the dynamic evolution of nuclei with an odd number of nucleons. We present for the first time a microscopic study of the induced fission of the odd neutron compound nuclei 239 U, 241,243 Pu, and the odd proton, odd neutron compound nucleus 238 Np, performed within the time-dependent density functional theory extended to superfluid fermion systems, without any simplifying assumptions, with controlled numerical approximations, and for a very large number of initial conditions. Because of the presence of the unpaired odd nucleon(s), the time-reversal symmetry of the fission compound nucleus is spontaneously broken, an aspect routinely neglected in the most advanced microscopic approaches of the past. The emerging fission fragment properties are quite similar to the properties of fission fragments of neighboring even-even nuclei. The time from saddle-to-scission is often significantly longer in odd-odd or odd-mass nuclei than for even-even nuclei, since systems with unpaired nucleons are easier to excite and the potential energy surfaces of these nuclei have more structure, often resembling a very complicated obstacle course, rather than a more direct evolution of the nuclear shape from the top of the outer fission barrier to the scission configuration. The Pauli blocking approximation, often invoked in the literature, expected to inhibit the fission of nuclei with unpaired nucleons, is surprisingly strongly violated during the fission dynamics.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Template-based automatic breast segmentation on MRI by excluding the chest region

Purpose: Methods for quantification of breast density on MRI using semiautomatic approaches are commonly used. In this study, the authors report on a fully automatic chest template-based method. Methods: Nonfat-suppressed breast MR images from 31 healthy women were analyzed. Among them, one case was randomly selected and used as the template, and the remaining 30 cases were used for testing. Unlike most model-based breast segmentation methods that use the breast region as the template, the chest body region on a middle slice was used as the template. Within the chest template, three body landmarks (thoracic spine and bilateral boundary of the pectoral muscle) were identified for performing the initial V-shape cut to determine the posterior lateral boundary of the breast. The chest template was mapped to each subject's image space to obtain a subject-specific chest model for exclusion. On the remaining image, the chest wall muscle was identified and excluded to obtain clean breast segmentation. The chest and muscle boundaries determined on the middle slice were used as the reference for the segmentation of adjacent slices, and the process continued superiorly and inferiorly until all 3D slices were segmented. The segmentation results were evaluated by an experienced radiologist to mark voxels that were wrongly included or excluded for error analysis. Results: The breast volumes measured by the proposed algorithm were very close to the radiologist's corrected volumes, showing a % difference ranging from 0.01% to 3.04% in 30 tested subjects with a mean of 0.86% ± 0.72%. The total error was calculated by adding the inclusion and the exclusion errors (so they did not cancel each other out), which ranged from 0.05% to 6.75% with a mean of 3.05% ± 1.93%. The fibroglandular tissue segmented within the breast region determined by the algorithm and the radiologist were also very close, showing a % difference ranging from 0.02% to 2.52% with a mean of 1.03% ± 1.03%. The total error by adding the inclusion and exclusion errors ranged from 0.16% to 11.8%, with a mean of 2.89% ± 2.55%. Conclusions: The automatic chest template-based breast MRI segmentation method worked well for cases with different body and breast shapes and different density patterns. Compared to the radiologist-established truth, the mean difference in segmented breast volume was approximately 1%, and the total error by considering the additive inclusion and exclusion errors was approximately 3%. This method may provide a reliable tool for MRI-based segmentation of breast density.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Neutrino induced coherent pion production

We discuss different parameterizations of the C{sub 5}{sup A}(q{sup 2}) NDELTA form factor, fitted to the old Argonne bubble chamber data for pion production by neutrinos, and we use coherent pion production to test their low q{sup 2} behavior. We find moderate effects that will be difficult to observe with the accuracy of present experiments. We also discuss the use of the Rein-Sehgal model for low energy coherent pion production. By comparison to a microscopic calculation, we show the weaknesses some of the approximations in that model that lead to very large cross sections as well as to the wrong shapes for differential ones. Finally we show that models based on the partial conservation of the axial current hypothesis are not fully reliable for differential cross sections that depend on the angle formed by the pion and the incident neutrino.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Empirical Investigations of the Opportunity Limits of Automatic Residential Electric Load Shaping

Residential electric load shaping is often modeled as infrequent, utility-initiated, short-duration deferral of peak demand through direct load control. In contrast, modeled herein is the potential for frequent, transactive, intraday, consumer-configurable load shaping for storage-capable thermostatically controlled electric loads (TCLs), including refrigerators, freezers, and hot water heaters. Unique to this study are 28 months of 15-minute-interval observations of usage in 101 homes in the Pacific Northwest United States that specify exact start, duration, and usage patterns of approximately 25 submetered loads per home. The magnitudes of the load shift from voluntarily-participating TCL appliances are aggregated to form hourly upper and lower load-shaping limits for the coordination of electrical generation, transmission, distribution, storage, and demand. Empirical data are statistically analyzed to define metrics that help quantify load-shaping opportunities.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Microscopic nuclear mass table with high-performance computing

We overview the methodology behind the large-scale mass table calculations based on the nuclear density functional theory (DFT) with Skyrme energy density functionals (EDFs). The calculations employing massively parallel computers are done in a large configuration space of an axially deformed harmonic oscillator. Nuclear mass tables tabulating global nuclear properties such as binding energies, radii, shape deformations, and pairing gaps are obtained for several Skyrme EDFs augmented by a mixed-type pairing functional, using an approximate particle number projection before variation. Specialty visualization tools have been developed to analyze the results. As an illustrative example of our current capabilities, we show some results for a wide range of even-even nuclei with Z ≤ 120 and N ≤ 300.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Simulating higher-dimensional geometries in GADRAS using approximate one-dimensional solutions.

The Gamma Detector Response and Analysis Software (GADRAS) software package is capable of simulating the radiation transport physics for one-dimensional models. Spherical shells are naturally one-dimensional, and have been the focus of development and benchmarking. However, some objects are not spherical in shape, such as cylinders and boxes. These are not one-dimensional. Simulating the radiation transport in two or three dimensions is unattractive because of the extra computation time required. To maintain computational efficiency, higher-dimensional geometries require approximations to simulate them in one-dimension. This report summarizes the theory behind these approximations, tests the theory against other simulations, and compares the results to experimental data. Based on the results, it is recommended that GADRAS users always attempt to approximate reality using spherical shells. However, if fissile material is present, it is imperative that the shape of the one-dimensional model matches the fissile material, including the use of slab and cylinder geometry.

Thoreson, Gregory G.↗

Synthesis and electrochemical capacitance of long tungsten oxide nanorod arrays grown vertically on substrate

Highlights: ► Growth of long amorphous tungsten oxide nanorods on a substrate. ► Formation of single-crystalline tungsten oxide nanorods by a heat-treatment. ► High electrochemical pseudocapacitance of 2.8 mF cm{sup −2}. ► Excellent cyclability of psuedocapacitance up to 1000 cycles. -- Abstract: Long tungsten oxide nanorods are vertically grown on Al/W/Ti coated silicon substrates using a two-step anodization process. The first anodization of the Al film forms a mesh-like mask of anodic aluminum oxide, and the second anodization of the W film results in the formation of a buffer layer, a bottom nanorod, and a top nanorod of amorphous tungsten oxide. A pore-widening process prior to the second anodization leads to the enhancement of nanorod length above approximately 500 nm. After a heat-treatment, the tungsten oxide nanorods are crystallized to form a single crystalline structure while the buffer layer forms a polycrystalline structure. The crystalline tungsten oxide nanorods show a cyclic voltammogram retaining the quasi-rectangular shape of an electrochemically reversible faradaic redox reaction, i.e., a typical pseudocapacitive behavior. The maximum electrochemical capacitance per apparent surface area reaches approximately 2.8 mF cm{sup −2} at the voltage scan rate of 20 mV s{sup −1}, and the excellent cyclability of charge–discharge process is maintained up to 1000 cycles.

36 MATERIALS SCIENCE↗

The Polarimetric Radar Scattering Properties of Oriented Aggregates

The scattering properties of aggregates are studied herein. Early aggregates (<7 monomers) of branched planar crystals and mature aggregates (up to 100 monomers) of columns are randomly generated with varying assumptions about the monomer attachment processes and the orientation behavior during collection. The resulting physical properties of the aggregates correspond well with prior in situ and retrieved sizes and shapes. Assumed azimuthally uniform orientations during collection and monomer pivoting upon attachment resulted in flatter and denser aggregates. The column aggregates had lower density and more spherical shapes than the branched planar crystal aggregates. The scattering properties were calculated using the discrete dipole approximation for a set of orientation angles and transformed to spectral coefficients representing modes of orientation angle variability. The zeroth- and second-order coefficients dominate this variability, with the zeroth-order coefficients representing the scattering properties for randomly oriented particles. The second-order coefficients for backscatter showed differences between horizontal and vertical polarization increasing with density, and these coefficients for specific differential phase increase with both mass and density. Similarly, coefficients for the copolar covariance decreased with density. Rapid changes in the contributions to the radar moments from the second-order coefficients from low to moderate density were observed, likely due to the increasing presence of horizontally aligned monomers in the aggregate structure. Differences in how differential reflectivity and correlation coefficient evolve with the orientation distribution parameters suggest that these measurements, along with specific differential phase and reflectivity, provide complementary information about aggregate sizes, shapes, and orientation distributions.

Cloud microphysics↗

Understanding the Long-Term Spectral Variability of Cygnus X-1 with Burst and Transient Source Experiment and All-Sky Monitor Observations

We present a comprehensive analysis of all observations of Cyg X-1 by the Compton Gamma Ray Observatory Burst and Transient Source Experiment (BATSE; 20-300 keV) and by the Rossi X-Ray Timing Explorer all-sky monitor (ASM; 1.5-12 keV) until 2002 June, including approximately 1200 days of simultaneous data. We find a number of correlations between fluxes and hardnesses in different energy bands. In the hard (low) spectral state, there is a negative correlation between the ASM 1.5-12 keV flux and the hardness at any energy. In the soft (high) spectral state, the ASM flux is positively correlated with the ASM hardness but uncorrelated with the BATSE hardness. In both spectral states, the BATSE hardness correlates with the flux above 100 keV, while it shows no correlation with the 20-100 keV flux. At the same time, there is clear correlation between the BATSE fluxes below and above 100 keV. In the hard state, most of the variability can be explained by softening the overall spectrum with a pivot at approximately 50 keV. There is also another, independent variability pattern of lower amplitude where the spectral shape does not change when the luminosity changes. In the soft state, the variability is mostly caused by a variable hard (Comptonized) spectral component of a constant shape superposed on a constant soft blackbody component. These variability patterns are in agreement with the dependencies of the rms variability on the photon energy in the two states. We also study in detail recent soft states from late 2000 until 2002. The last of them has lasted thus far for more than 200 days. Their spectra are generally harder in the 1.5-5 keV band and similar or softer in the 3-12 keV band than the spectra of the 1996 soft state, whereas the rms variability is stronger in all the ASM bands. On the other hand, the 1994 soft state transition observed by BATSE appears very similar to the 1996 one. We interpret the variability patterns in terms of theoretical Comptonization models. In the hard state, the variability appears to be driven mostly by changing flux in seed photons Comptonized in a hot thermal plasma cloud with an approximately constant power supply. In the soft state, the variability is consistent with flares of hybrid, thermal/nonthermal, plasma with variable power above a stable cold disk. The spectral and timing differences between the 1996 and 2000-2002 soft states are explained by a decrease of the color disk temperature. Also, on the basis of broadband pointed observations simultaneous with those of the ASM and BATSE, we find the intrinsic bolometric luminosity increases by a factor of approximately 3-4 from the hard state to the soft one, which supports models of the state transition based on a change of the accretion rate.

Zdziarski, Andrzej A.↗

Basic Theoretical Methods in Microwave Plasma Polarimetry: Quasi-Isotropic Approximation, Stokes Vector Formalism and Complex Polarization Angle Method

Three different theoretical approaches are presented: quasi-isotropic approximation (QIA), Stokes vector formalism and complex polarization angle method, which allow describing polarization of electromagnetic waves in weakly anisotropic plasma. QIA stems directly from the Maxwell equations under assumption of weak anisotropy and has a form of coupled differential equations for the transverse components of the electromagnetic wave field. Being applied to high frequency (microwave or IR) electromagnetic waves in magnetized plasma, QIA describes combined action of Faraday and Cotton-Mouton phenomena. QIA takes into account curvature and torsion of the ray, describes normal modes conversion in the inhomogeneous plasma and allows specifying area of applicability of the method.In distinction to QIA, Stokes vector formalism (SVF) deals with quantities, quadratic in a wave field. It is shown (and this is the main result of the paper) that equation for Stokes vector evolution can be derived directly from QIA. This evidences deep unity of two seemingly different approaches. In fact QIA suggests somewhat more information than SVF; in particular, it describes the phases of both transverse components of the electromagnetic field, whereas SVF operates only with the phase difference.At last, the coupled equations of the quasi-isotropic approximation can be reduced to a single equation for complex polarization angle (CPA), which describes both the shape and orientation of the polarization ellipse. In turn, equation for CPA allows obtaining equations for traditional parameters of polarization ellipse, which in fact are equivalent to the equation for Stokes vector evolution. It is pointed out that every method under discussion has its own advantages plasma polarimetry.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

On the theory of conductivity of anisotropic composites: A linear-concentration approximation of inclusions

A general approach is proposed for calculating the conductivity of anisotropic composites with a low concentration of inclusions of an arbitrary shape. The contribution to effective conductivity {sigma}{sub e} , which is linear in concentration, is expressed in terms of the polarizability of the inclusion defined in a certain transformed system in which the inclusion is surrounded by an isotropic matrix. A transition to this system is performed using a symmetry transformation that does not change the equations for direct current.

36 MATERIALS SCIENCE↗

Observation of Associated Near-Side and Away-Side Long-Range Correlations in s N N =5.02 TeV Proton-Lead Collisions with the ATLAS Detector

CERN-LHC. Two-particle correlations in relative azimuthal angle, Delta(phi), and pseudorapidity, Delta(eta), are measured in sqrt(sNN) = 5.02 TeV p+Pb collisions recorded in September 2012 using the ATLAS detector at the LHC. The measurements are performed using approximately 1 mub^1 of data as a function of transverse momentum (pT) and the transverse energy summed over 3.1 < eta < 4.9 in the direction of the Pb beam. The correlation function, constructed from charged particles, exhibits a long-range (2 < |Delta(eta)| < 5) near-side (Delta(phi) ~ 0) correlation that grows rapidly with increasing transverse energy. A long-range away-side (Delta(phi) ~ pi) correlation, obtained by subtracting the expected contributions from recoiling dijets and other sources estimated using events with small transverse energy, is found to match the near-side correlation in magnitude, shape (in Delta(eta) and Delta(phi)) and transverse energy dependence. The resultant Delta(phi) correlation is approximately symmetric about pi/2, and is consistent with a dominant cos(2*Delta(phi)) modulation for all transverse energy ranges and particle pT.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Modeling of a Non-Dilute Alloy Solidification Under Terrestrial and Microgravity Conditions

A general finite element model of non-dilute alloy solidification was used to simulate growth of HgCdTe from the melt. 2-D and 3-D models with and without Oberbeck-Boussinesq (O-B) approximation were used. Verification of the 3-D model was based on experimental data. The location and the shape of the interface were determined using melting temperatures obtained from the HgCdTe liquidus curve. Double-diffusive convection in the melt is caused by radial temperature gradients and by rejection at the solid-melt interface of the heavier HgTe-rich solute. Because of these complicating factors, dimensional rather than non-dimensional modeling was performed. Models based on complete set of Navier-Stokes equations for compressible media are superior to the O-B approximation in microgravity, because they provide more accurate estimation of convection.

Bune, Andris V.↗

Collective neutrino oscillations in nonspherical geometry

The rich phenomenology of collective neutrino oscillations has been studied only in one-dimensional or spherically symmetric systems. Motivated by the nonspherical example of coalescing neutron stars, presumably the central engines of short gamma-ray bursts, we use the Liouville equation to formulate the problem for general source geometries. Assuming the neutrino ensemble displays self-maintained coherence, the problem once more becomes effectively one-dimensional along the streamlines of the overall neutrino flux. This approach for the first time provides a formal definition of the 'single-angle approximation' frequently used for supernova neutrinos and allows for a natural generalization to nonspherical geometries. We study the explicit example of a disk-shaped source as a proxy for coalescing neutron stars.

79 ASTRONOMY AND ASTROPHYSICS↗