Search NASA⌕ Search

SEARCH · Search NASA

Results for “sintering temperature”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Al insertion and additive effects on the thermoelectric properties of yttrium boride

The aluminoboride Y{sub x}Al{sub y}B{sub 14} (x ∼ 0.57, 0.41 ≤ y ≤ 0.63) has been found to show striking p-n control of the thermoelectric properties through variations of the y occupancy of the Al site. The effect of Al was investigated in further extremes. Polycrystalline samples of Al-free Y{sub x}B{sub 14}(x ∼ 0.55; “YB{sub 25}”) were successfully synthesized in sufficient amounts for bulk spark plasma sintering (SPS) samples and their thermoelectric properties were investigated. Y{sub 0.56}Al{sub 0.57}B{sub 14} was also prepared in comparison, and further Al was added to the samples through SPS treatment. We observed that Y{sub 0.55}B{sub 14} exhibits large positive Seebeck coefficients, ∼1000 μV K{sup −1}, around room temperature and the absolute value of the Seebeck coefficient largely decreases with increase of temperature while that of Y{sub 0.56}Al{sub 0.57}B{sub 14} is proportional to T{sup −1/2}, indicating a strong effect of Al on the electronic structure around the Fermi level. Y{sub 0.55}B{sub 14} was found to be strongly disordered with a relatively low thermal conductivity and short localization length of 0.65 Å which is close to that previously determined for the disordered and thermally glass-like compound YB{sub 66}. Occupancy of Al could not be increased further for the Al-rich sample, although Al was discovered to act as a sintering aid to enhance density and ZT could be significantly improved by 50%.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cluster size effects on sintering, CO adsorption, and implantation in Ir/SiO{sub 2}

A series of planar model catalysts have been prepared via deposition of Ir{sub n}{sup +} on thermally grown amorphous SiO{sub 2}/Si(100) and ion scattering spectroscopy was used to probe surface structure as a function of cluster size, impact energy, and surface temperature. Deposition of Ir{sub 2} or Ir{sub 10} at low energies and room temperature results in stable clusters forming one- or two-dimensional single layer islands on the oxide surface. Heating the samples to 750 K leads to agglomeration, forming multilayer structures on the surface. Ir{sub 1} deposited under similar conditions sinters into large clusters at room temperature. Deposition at 110 K at least partially stabilizes the Ir atoms with respect to diffusion and sintering. At higher deposition energies, partial implantation into the surface is observed, but this appears to be insufficient to stabilize the clusters against sintering at elevated temperature. At low temperatures, substrate-mediated adsorption of CO is found to be highly efficient, leading to near saturation coverages of CO bound atop the Ir{sub n} clusters. The CO can be removed by careful He{sup +} sputtering. The deposition/binding behavior of Ir{sub n} on SiO{sub 2} is quite different from Ir{sub n}/TiO{sub 2}(110), for which the clusters bind in three-dimensional morphology, starting at Ir{sub 5}. That system also shows substrate-mediated adsorption of CO, but the CO preferentially binds at the periphery of the clusters rather than on top.

36 MATERIALS SCIENCE↗

Significant enhancement of thermoelectric properties and metallization of Al-doped Mg{sub 2}Si under pressure

We report results of investigations of electronic transport properties and lattice dynamics of Al-doped magnesium silicide (Mg{sub 2}Si) thermoelectrics at ambient and high pressures to and beyond 15 GPa. High-quality samples of Mg{sub 2}Si doped with 1 at. % of Al were prepared by spark plasma sintering technique. The samples were extensively examined at ambient pressure conditions by X-ray diffraction studies, Raman spectroscopy, electrical resistivity, magnetoresistance, Hall effect, thermoelectric power (Seebeck effect), and thermal conductivity. A Kondo-like feature in the electrical resistivity curves at low temperatures indicates a possible magnetism in the samples. The absolute values of the thermopower and electrical resistivity, and Raman spectra intensity of Mg{sub 2}Si:Al dramatically diminished upon room-temperature compression. The calculated thermoelectric power factor of Mg{sub 2}Si:Al raised with pressure to 2–3 GPa peaking in the maximum the values as high as about 8 × 10{sup −3} W/(K{sup 2}m) and then gradually decreased with further compression. Raman spectroscopy studies indicated the crossovers near ∼5–7 and ∼11–12 GPa that are likely related to phase transitions. The data gathered suggest that Mg{sub 2}Si:Al is metallized under moderate pressures between ∼5 and 12 GPa.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of the U{sub 3}O{sub 8} effect on MOX fuel sintering mechanisms

The manufacturing of uranium-plutonium mixed oxides fuel (also known as MOX) for light water reactor (LWR), starting generally from UO{sub 2} and PuO{sub 2} raw powders and resulting in (U,Pu)O{sub 2} pellets, involves several steps: i) preparation of a UO{sub 2}+PuO{sub 2} master blend with a Pu content of about 25-30 at% by milling and sieving, ii) dilution by mixing the master blend with non-milled UO{sub 2} to reach a Pu content of about 10 at%, iii) pressing and iv) sintering under Ar / 4 % H{sub 2} + H{sub 2}O gas mixture. In this paper, triuranium octoxide (U{sub 3}O{sub 8}) is used as an additional raw powder in the LWR MOX fuel manufacturing. One of the objectives of this work is to understand the sintering behavior of U{sub 3}O{sub 8} under Ar / 4 % H{sub 2} + H{sub 2}O gas mixture and its effect when added to a UO{sub 2}-PuO{sub 2} mixture. A special attention is given on U{sub 3}O{sub 8} reduction, phase transitions, redox reactions and oxygen partial pressure (pO{sub 2}) evolution during shrinkage: the impact of these phenomena on the densification kinetics is discussed, especially the de-densification phenomenon which could occur at high temperature. For that purpose a specific dilatometer, coupled with a zirconia probe implemented at furnace inlet and outlet has been used which allows following continuously and simultaneously the fuel shrinkage and the oxygen partial pressure variation as a function of temperature. The experiments have shown that, contrary to UO{sub 2}, the sintering of milled PuO{sub 2} is accompanied by a de-densification at high temperature. This de-densification phenomenon already occurs with co-milled 71 at% UO{sub 2} + 29 at% PuO{sub 2}, but with a smaller magnitude. When pure milled U{sub 3}O{sub 8} is sintered, no de-densification phenomenon is observed but the low density of the sintered pellet could hide such a phenomenon. The incorporation of U{sub 3}O{sub 8} into a UO{sub 2}-PuO{sub 2} master blend containing 29 at% of plutonium leads to an exacerbation of the de-densification phenomenon with a higher loss on ignition suggesting that U{sub 3}O{sub 8} contributes also to the de-densification phenomenon. This could be due to high temperature reactions involving the initial carbon content of the raw U{sub 3}O{sub 8} powder. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Mechanically Robust High Magnetic Performance Sm-Co Sintered Magnets (Final Report)

Samarium-cobalt based permanent magnets (SmCo 5 and Sm 2 Co 17 ) have excellent magnetic properties, good corrosion resistance, and long-term thermal stability. Sm-Co sintered magnets have been widely used in electric machines, telecommunication, biomedical devices, and magnetic sensors. They are the most preferred magnets for high-temperature applications (200 - 550 °C). However, Sm-Co sintered magnets are brittle. They cannot be used for applications subjected to high stress, vibration, or mechanical shock. Sm-Co sintered magnets are prone to chipping, and fracture in the course of block magnet manufacturing, part machining, assembly, and operation. The brittleness leads to a magnet production loss of up to 20-30% in volume and imposes limitations on part size and shape. Developing mechanically robust high-performance Sm-Co sintered magnets is of great scientific and technical significance. This project is in response to the current market need for mechanically robust high magnetic performance Sm-Co sintered magnets and their novel manufacturing processes. The project will focus on scaling-up, validation, and technology maturation study of the mechanically tough high magnetic performance Sm-Co magnets developed by Ames Laboratory at a lab-scale with the collaboration of the industry partner Electron Energy Corporation (EEC).

36 MATERIALS SCIENCE↗

Dielectric Performance of High Purity HTCC Alumina at High Temperatures - A Comparison Study with Other Polycrystalline Alumina

A very high purity (99.99+) high temperature co-fired ceramic (HTCC) alumina has recently become commercially available. The raw material of this HTCC alumina is very different from conventional HTCC alumina, and more importantly there is no glass additive in this co-fired material. Previously, selected HTCC and LTCC (low temperature co-fired ceramic) alumina materials were evaluated at high temperatures as dielectric and compared to a regularly sintered 96 polycrystalline alumina (96 Al2O3), where 96 alumina was used as the benchmark. A prototype packaging system based on regular 96 alumina with Au thick-film metallization successfully facilitated long term testing of high temperature silicon carbide (SiC) electronic devices for over 10,000 hours at 500C. In order to evaluate this new HTCC alumina for possible high temperature packaging applications, the dielectric properties of this HTCC alumina substrate were measured and compared with those of 96 alumina and a LTCC alumina from room temperature to 550C at frequencies of 120 Hz, 1 KHz, 10 KHz, 100 KHz, and 1 MHz. A parallel-plate capacitive device with dielectric of the HTCC alumina and precious metal electrodes were used for measurements of the dielectric constant and dielectric loss of the co-fired alumina material in the temperature and frequency ranges. The capacitance and AC parallel conductance of the capacitive device were directly measured by an AC impedance meter, and the dielectric constant and parallel AC conductivity of the dielectric were calculated from the capacitance and conductance measurement results. The temperature and frequency dependent dielectric constant, AC conductivity, and dissipation factor of the HTCC alumina substrate are presented and compared to those of 96 alumina. Other technical advantages of this new co-fired material for possible high packaging applications are also discussed.

High temperature↗

Properties measurements of (U{sub 0.7}Pu{sub 0.3})O{sub 2-x} in PO{sub 2}-controlled atmosphere

The investigation of physical properties of uranium and plutonium mixed oxide (MOX) fuels is important for the development of fast reactor fuels. It is well known that MOX is a nonstoichiometric oxide, and the physical properties change drastically with the Oxygen-to-Metal (O/M) ratio. A control technique for O/M ratio was established for measurements of high temperature properties of uranium and plutonium mixed oxide fuels. Sintering behavior, thermal expansion and O/M change of (U{sub 0.7}Pu{sub 0.3})O{sub 2.00} and (U{sub 0.7}Pu{sub 0.3})O{sub 1.99} were investigated in PO{sub 2}-controlled atmosphere which was controlled by H{sub 2}/H{sub 2}O gas system. Sintering behavior changed drastically with O/M ratio, and shrinkage of (U{sub 0.7}Pu{sub 0.3})O{sub 2.00} was faster and more advanced at lower temperatures as compared with (U{sub 0.7}Pu{sub 0.3})O{sub 1.99}. Thermal expansion was observed to be slightly increased with decreasing O/M ratio. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Spark-plasma-sintering magnetic field assisted compaction of Co{sub 80}Ni{sub 20} nanowires for anisotropic ferromagnetic bulk materials

We developed a two-step process showing the way for sintering anisotropic nanostructured bulk ferromagnetic materials. A new reactor has been optimized allowing the synthesis of several grams per batch of nanopowders via a polyol soft chemistry route. The feasibility of the scale-up has been successfully demonstrated for Co{sub 80}Ni{sub 20} nanowires and a massic yield of ∼97% was obtained. The thus obtained nanowires show an average diameter of ∼6 nm and a length of ∼270 nm. A new bottom-up strategy allowed us to compact the powder into a bulk nanostructured system. We used a spark-plasma-sintering technique under uniaxial compression and low temperature assisted by a permanent magnetic field of 1 T. A macroscopic pellet of partially aligned nanowire arrays has been easily obtained. This showed optimized coercive properties along the direction of the magnetic field applied during compaction (i.e., the nanowires' direction)

36 MATERIALS SCIENCE↗

Optimization of Structurally Enhanced Solder Transient Liquid Phase Bonding

High temperature packaging technologies are a necessity for high temperature capable devices. SAC305 solder has an operational limit of 174°C imposed by creep effects which aligns well with current junction temperature limits of 175°C. Wide band gap semiconductor materials have the potential to reach junction temperatures of up to 800°C that are not currently attainable with significant reliability. Capitalizing on this potential will requires substrates and attachments that can operate well beyond the current 175°C standard. Silver sintering pastes have received widespread interest as a high temperature attachment alternative. However, the process requires high pressure bonding in an inert environment to achieve acceptable bond quality. Transient liquid phase (TLP) sintering is capable of good bond quality without pressure requirements but suffers from low thermal conductivity and only slightly reduced cost compared to silver sintering. SAC305 solder contains the same constituent materials for TLP as available copper-tin TLP sintering paste. By introducing engineered surface structures into the bond, intermetallic formation can be accelerated producing a bond similar to TLP sintering but in an ambient environment and for reduced cost. While this process has been demonstrated, it has not yet been optimized. Currently bonds are formed using a 75 μm stencil on substrate surface structures 24 μm tall, covering 19% of the bonding area. The process takes about 4 hours not including the formation of surface structures. Here, this study will center on the effects of stencil thickness and coating methods. Samples will be analyzed by scanning acoustic microscopy, die shear testing and cross sectional scanning acoustic microscopy.

42 ENGINEERING↗

Surface phenomena during the early stages of sintering in steels modified with Fe–Mn–Si–C master alloys

The characteristics of the metallic powder surface play a critical role in the development of strong bonds between particles during sintering, especially when introducing elements with a high affinity for oxygen. In this study, Mn and Si have been combined in a Fe–Mn–Si–C master alloy powder in order to reduce their chemical activity and prevent oxidation during the heating stage of the sintering process. However, when this master alloy powder is mixed with an iron base powder, differences in chemical activity between both components can lead to an oxygen transfer from the iron base powder to the surface of the master alloy particles. The present research is focused on studying the evolution of the master alloy particle surface during the early stages of sintering. Surface characterization by X-ray Photoelectron Spectroscopy (XPS) shows that the master alloy powder surface is mostly covered by a thin easily reducible iron oxide layer (∼ 1 nm). Mn–Si particulate oxides are found as inclusions in specific areas of the surface. Evolution of oxides during sintering was studied on green compacts containing iron powder, graphite and Fe–Mn–Si–C master alloy powder that were heat treated in vacuum (10{sup −6} mbar) at different temperatures (from 400, 600, 800 to 1000 °C) and analyzed by means of XPS. Vacuum sintering provides the necessary conditions to remove manganese and silicon oxides from the powder surface in the range of temperatures between 600 °C and 1000 °C. When sintering in vacuum, since the gaseous products from reduction processes are continuously eliminated, oxidation of master alloy particles due to oxygen transfer through the atmosphere is minimized. - Highlights: • Mn and Si were introduced in sintered steels using a master alloy powder. • Surface of the master alloy is mainly covered by an easily reducible iron oxide. • Temperature ranges for oxidation/reduction are identified. • Vacuum conditions avoid oxygen transfer to oxidation sensitive elements. • Chemical activity of Mn and Si is lowered when combined in a form of master alloy.

36 MATERIALS SCIENCE↗

Reactive flash sintering of powders of four constituents into a single phase of a complex oxide in a few seconds below 700°C

Abstract Recent work on reactive flash sintering of powders of two oxides, bismuth and of iron oxide, into pure single phase bismuth ferrite, which was accomplished in a few seconds at low furnace temperatures, is expanded to four constituents, alumina, lithia, zirconia, and lanthana, to produce reasonably dense polycrystals of a predominantly single phase, cubic LLZO(Al). Transformation and sintering occur concurrently at a furnace temperature near 700°C, in ambient atmosphere, in just a few seconds. The process may simplify the preparation of complex ceramics with new chemistries and dopants, which are predicted from ab intio calculations to have special attributes, not only because the powders sinter quickly at low temperatures, but also because the need for stoichiometric powders as starting materials is obviated.

Avila, Viviana↗

Electronic structure and thermoelectric properties of clathrate compounds Ba{sub 8}Al{sub x}Ge{sub 46-x}

Thermoelectric properties of Al-substituted Ge clathrate compounds Ba{sub 8}Al{sub x}Ge{sub 46-x} were investigated experimentally and theoretically. Polycrystalline Ba{sub 8}Al{sub x}Ge{sub 46-x} (x=12-18) was synthesized by using an arc melting and a spark plasma sintering technique. The obtained samples show the n-type behavior and the carrier concentration decreases with increasing amount of Al composition from x=12 to 16. The reasonably large power factors was obtained: 900-1000 {mu}W/cm K{sup 2} around 900 K. Theoretically electronic structure of Ba{sub 8}Al{sub 16}Ge{sub 30} was calculated by means of a first-principles method and then thermoelectric properties were analyzed on the basis of the result of the calculated electronic structure. The calculated thermoelectric properties agree with the experimental results very well in the wide range of temperature between room temperature and 900 K.

36 MATERIALS SCIENCE↗

Cost-effective solid state reactive sintering method for protonic ceramic fuel cells

The present invention relates to a protonic ceramic fuel cell and a method of making the same. More specifically, the method relates to a cost-effective route which utilizes a single moderate-temperature (less than or equal to about 1400° C.) sintering step to achieve the sandwich structure of a PCFC single cell (dense electrolyte, porous anode, and porous cathode bone). The PCFC layers are stably connected together by the intergrowth of proton conducting ceramic phases. The resulted PCFC single cell exhibits excellent performance (about 450 mW/cm2 at about 500° C.) and stability (greater than about 50 days) at intermediate temperatures (less than or equal to about 600° C.). The present invention also relates to a two step method for forming a PCFC, and the resulting PCFC.

30 DIRECT ENERGY CONVERSION↗

Metallic phases of cobalt-based catalysts in ethanol steam reforming: The effect of cerium oxide

The catalytic activity of cobalt in the production of hydrogen via ethanol steam reforming has been investigated in its relation to the crystalline structure of metallic cobalt. At a reaction temperature of 350 8C, the specific hydrogen production rates show that hexagonal close-packed (hcp) cobalt possesses higher activity than face-centered cubic (fcc) cobalt. However, at typical reaction temperatures (400– 500 8C) for ethanol steam reforming, hcp cobalt is transformed to less active fcc cobalt, as confirmed by in situ X-ray diffractometry (XRD). The addition of CeO2 promoter (10 wt.%) stabilizes the hcp cobalt structure at reforming temperatures up to 600 8C. Moreover, during the pre-reduction process, CeO2 promoter prevents sintering during the transformation of Co3O4 to hcp cobalt. Both reforming experiments and in situ diffuse-reflectance infrared Fourier transform spectroscopy (DRIFTS) showed that the surface reactions were modified by CeO2 promoter on 10% Ce–Co (hcp) to give a lower CO selectivity and a higher H2 yield as compared with the unpromoted hcp Co.

08 HYDROGEN↗

On fabrication procedures of Li-ion conducting garnets

Ceramic oxides exhibiting high lithium-ion mobility at room temperature receive broad attention as candidate electrolytes for lithium batteries. Lithium-stuffed garnets from the Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12} group seem to be especially promising because of their high ionic conductivity at room temperature and their electrochemical stability. In this work, we discuss factors that affect formation of the garnet in its bulk form or in the form of thick and thin films. We demonstrate that zinc oxide can be applied as a sintering aid that facilitate the formation of the highly conducting cubic Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12} garnet phase in a single-step sintering procedure. Based on our experience with the single-step sintering experiments, we successfully fabricated a thick-film membrane consisting of a garnet solid electrolyte using the tape casting technique. In order to reduce the thickness of the electrolyte even further we investigated the fabrication of a thin-film Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12} electrolyte by means of the pulsed laser deposition technique.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solid-State Sintering of Core-Shell Ceramic Powders Fabricated by Particle Atomic Layer Deposition

The properties of technical ceramics are highly dependent on their microstructure, which evolves during sintering. Sintering is the process by which ceramic parts are subjected to high temperatures to activate chemical diffusion and the consumption of porosity. During the initial stage of sintering, interparticle necks between neighboring particles form and subsequently increase in size, consuming porosity as the particle centers move closer together. To experimentally determine how this process depends on particle surface composition, particle atomic layer deposition (ALD) was used to deposit a thin film of amorphous aluminum oxide (Al2O3) onto yttria-stabilized tetragonal zirconia (3YSZ) particles, producing core-shell structured powders. The uniformity of the Al2O3 film was confirmed with transmission electron microscopy and energy dispersive spectroscopy. Scanning electron microscopy was used to observe microstructural evolution during sintering, and the dihedral angles of Al2O3 and 3YSZ grains were measured to determine the ratio of interfacial energies between the 3YSZ|3YSZ, 3YSZ|Al2O3, and Al2O3|Al2O3 interfaces. Analysis of the densification kinetics revealed that the initial stage of densification is dependent on the material at the surface of the particles (ie, the Al2O3 film) and is controlled by the diffusion of Al3+ cations through Al2O3. Once the Al2O3 film has coalesced, the sintering behavior is controlled by the densification of the core material (3YSZ). Thus, core-shell powders fabricated by particle ALD sinter by a two-step process where the kinetics are dependent on the material present at interparticle contacts.

alumina↗

Effect of B{sub 2}O{sub 3}-Bi{sub 2}O{sub 3}-SiO{sub 2}-ZnO glass on the dielectric and magnetic properties of ferroelectric/ferromagnetic composite for low temperature cofired ceramic technology

Ni-Cu-Zn ferrite/BaTiO{sub 3} composites with different additive amounts of B{sub 2}O{sub 3}-Bi{sub 2}O{sub 3}-SiO{sub 2}-ZnO (BBSZ) glass have been prepared by a conventional solid-reaction method and sintered at 900 deg. C to adapt to low temperature cofired ceramic (LTCC) technology. The dielectric and magnetic properties of the composites can be effectively improved with increasing BBSZ content. Here, the BBSZ glass mainly plays two roles, one is as a sintering aid promoting grain growth and the other is as a low permittivity phase or nonmagnetic phase leading to dilution effect on the dielectric or magnetic properties of the composites. The effect degree of above two roles is related to the variation in BBSZ content and has been discussed combining with the effective medium theory. The lower and upper bounds for the effective permittivity and permeability have been given by the Maxwell-Garnett rules.

36 MATERIALS SCIENCE↗