Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural defects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Ab initio study of the effects of dilute defects on the local structure of unalloyed δ-plutonium

We used density functional theory to examine the effects impurities and vacancies in the dilute limit in order to explore the effects on the local structure of the unalloyed face centered cubic δ-Pu lattice. The impurities considered are the radioactive daughter U or stabilizers in δ-phase stabilizer Ga. These impurities were placed at various interstitial sites, including octahedral, tetrahedral, and split interstitial along the (100) direction, as well as substitutional lattice sites. Self-interstitials, mono and di-vacancies were also considered. In addition we examined impurity-vacancy complexes at first and second nearest neighboring distances from each other. Radial distribution functions were plotted to gauge the local structural variations around the defect within the lattice and volume change with structural variation quantifies influence on thermodynamics. These local distortions will be discussed in this report.

36 MATERIALS SCIENCE↗

Linking the Codependence of Grain Boundary Structure and Density to Defect Evolution Mechanisms during Radiation Damage

There is little understanding of the direct link between grain boundary character and density, and defect denuded zones. For example, the role of reduced grain size to the nanocrystalline regime and subsequent increase in grain boundary density is not fully understood in the context of dislocation or void behavior near grain boundaries. In addition, little is understood experimentally on how defect absorption changes the structure of the grain boundary during irradiation and may play a role in the migration of defects and solutes. This work aims to define a framework for understanding the origin of radiation damage mechanisms in model BCC and FCC nanocrystalline materials, on which a foundation of radiation tolerant material development can be built. The key questions that will be addressed by this work are: 1. What is the influence of GB density and GB character (GBC) on radiation damage accumulation near grain boundaries in model nanocrystalline FCC and BCC alloys; how are these two effects connected? 2. In the context of radiation induced segregation (RIS), what effect does species dependent interstitial diffusion have on the GB chemistry in light of these two dependencies? 3. How does grain boundary sink efficiency evolve with radiation over time? In situ and analytical transmission electron microscopy techniques are used to study both pure and alloy nanocrystalline materials under irradiation. TEM samples prepared from thin films will be irradiated in-situ, allowing for dynamic observation of the behavior of the alloy under ion irradiation. The key findings from this program were (1) the control of thin film texture via sputtering; (2) the development of characterization tools for defects and grain boundary quantification; (3) the development of new techniques for defect characterization toward high throughput analysis; (4) a mapped out parameter space for defect evolution as a function of grain size and grain boundary character; and finally (5) an indication of sink efficiency and its stability during irradiation.

36 MATERIALS SCIENCE↗

Structure constants of defect changing operators on the 1/2 BPS Wilson loop

We study three-point functions of operators on the 1/2 BPS Wilson loop in planar N = 4 super Yang-Mills theory. The operators we consider are 'defect changing operators', which change the scalar coupled to the Wilson loop. We first perform the computation at two loops in general set-ups, and then study a special scaling limit called the ladders limit, in which the spectrum is known to be described by a quantum mechanics with the SL(2,R) symmetry. In this limit, we resume the Feynman diagrams using the Schwinger-Dyson equation and determine the structure constants at all order in the rescaled coupling constant. Besides providing an interesting solvable example of defect conformal field theories, our result provides invaluable data for the integrability-based approach to the structure constants.

1/N Expansion↗

Nanoscale Strain and Octahedral Tilting Removes Structural and Nonradiative Defects in 2D-Templated FAPbI 3

The halide perovskite formamidinium lead iodide (FAPbI 3 ) is a prime candidate for photovoltaics due to its excellent optoelectronic properties, but its application has been limited due to its structural instability. The large size of the FA cation results in metastability of the photoactive cubic phase and a facile degradation into thermodynamically stable hexagonal phases at room temperature. Recently, the incorporation of two-dimensional (2D) Ruddlesden-Popper halide perovskite seeds into a FAPbI 3 precursor solution was shown to template the growth of and stabilize cubic FAPbI 3 . Here, in this study, we investigate the nanoscale structural and optoelectronic mechanisms behind the observed bulk stabilization using synchrotron-based X-ray microscopies. Nanoprobe X-ray diffraction reveals 2D-templated FAPbI 3 films exhibit an average compressive strain normal to the substrate of -3.3%, 2-fold larger than that of MACl-stabilized FAPbI 3 . This compression creates locally templated regions composed of tetragonal-phase FAPbI 3 distributed nonuniformly throughout the film with fewer crystalline defects than purely cubic regions. Scanning X-ray excited optical luminescence (X-ray analog of photoluminescence) reveals that this local templating results in increased radiative recombination and red-shifted band edge and emission. Our results provide insight into the microscopic mechanism for the phase stabilization of FAPbI 3 using 2D perovskites as templates.

X-ray diffraction↗

Be₂C as a neutron moderator for molten salt reactors: A first-principles study of structural, electronic, and defect properties

Beryllium carbide (Be 2 C), valued for its high neutron moderation efficiency and low absorption cross section, is a promising high-temperature neutron moderator for molten salt reactors. Its practical adoption, however, demands significant technological maturation, requiring comprehensive theoretical and experimental studies of its response to different conditions, including high temperature and irradiation. Here, we report initial results on the fundamental properties and radiation-induced defects of Be 2 C, focusing on antisites, vacancies, interstitial atoms, and Frenkel pairs in the Be and C sublattices. Using density functional theory (DFT) and ab initio molecular dynamics (AIMD), we calculate the defects formation and binding energies, evaluating their dependence on the supercell size, charge states, and chemical environment. In general, carbon defects exhibit higher formation energies, greater sensitivity to cell size, and stronger impacts on the density of states compared to beryllium defects, with charged state the effects being more pronounced. Static DFT reveals multiple metastable interstitial configurations, while AIMD identifies ground states as C-C <100> dumbbells and octahedral Be interstitials. In conclusion, the diversity of metastable configurations and defect states complicates the diffusion mechanisms, requiring further molecular dynamics analysis to elucidate the mechanisms and rates of radiation-induced atomic transport, as well as the structural stability of Be2C.

Ab initio modeling↗

Molecular and Structural Probes of Defect States in Quantum Dots for Photoconversion

The objective of this research on quantum confined nanocrystals is to develop a fundamental understanding of the chemical properties of ligand-nanocrystal interfaces that will enable the control of defect-driven charge recombination in these systems. With this control, quantum confined nanocrystals may represent a cost effective means of absorbing light over the full solar spectrum for the production of electricity and fuels from sunlight. New spectroscopic techniques will be developed in this project that allow a direct correlation of molecular structural information about the ligand-nanocrystal interactions with the corresponding density and energetic distribution of surface defects and the influence that these defects have on charge transport and recombination. The insight that is gained will provide a molecular basis for the rational development of novel pathways for the of use quantum dots in systems for solar energy transduction.

14 SOLAR ENERGY↗

Stabilization of Ca1-dFe2-xMnxO4 (0.44 lt x lt 2) with CaFe2O4-type Structure and Ca2plus Defects in 1D Channels

Solid solutions of Ca{sub 1-{delta}}Fe{sub 2-x}Mn{sub x}O{sub 4} (0.45 {<=} x {<=} 2) were synthesized from CaCl{sub 2} as flux at 850 C in air. The entire series, even with x = 2, crystallizes in the CaFe{sub 2}O{sub 4}-type structure (Pnma), rather than in the CaMn{sub 2}O{sub 4}-type structure (Pbcm). Rietveld refinements confirmed mixed-valency Mn{sup 3+}/Mn{sup 4+} and a substantial level of Ca{sup 2+} deficiency ({delta} {approx} 0.25) at high x. With increasing x, the unit-cell dimensions a and b decrease, while that of c increases. Detailed structural analyses, together with Mn K-edge X-ray absorption and {sup 57}Fe Moessbauer spectroscopy studies, revealed that the stabilization of CaFe{sub 2}O{sub 4}-type structure, even at high values of x, is due to the existence of non-Jahn-Teller active Mn{sup 4+} (and Fe{sup 3+}), which is compensated by the formation of the Ca{sup 2+} deficiencies in the one-dimensional (1D) channels of Ca{sub 1-{delta}}Fe{sub 2-x}Mn{sub x}O{sub 4} during the flux synthesis. Antiferromagnetic (AFM) long-range ordering is achieved for all compounds at low temperature, because of strong AFM interactions between Mn{sup 3+}/Mn{sup 4+} and Fe{sup 3+}. In addition, a spin (or cluster) glass component was also observed, as expected, because of the extensive Mn/Fe structural and Mn{sup 3+}/Mn{sup 4+} charge disordering.

36 MATERIALS SCIENCE↗

Luminescence of defects in the structural transformation of layered tin dichalcogenides

Layered tin sulfide semiconductors are both of fundamental interest and attractive for energy conversion applications. Sn sulfides crystallize in several stable bulk phases with different Sn:S ratios (SnS 2 , Sn 2 S 3 , and SnS), which can transform into phases with a lower sulfur concentration by introduction of sulfur vacancies (V S ). How this complex behavior affects the optoelectronic properties remains largely unknown but is of key importance for understanding light-matter interactions in this family of layered materials. In this work, we use the capability to induce V S and drive a transformation between few-layer SnS 2 and SnS by electron beam irradiation, combined with in-situ cathodoluminescence spectroscopy and ab-initio calculations to probe the role of defects in the luminescence of these materials. In addition to the characteristic band-edge emission of the endpoint structures, our results show emerging luminescence features accompanying the SnS 2 to SnS transformation. Comparison with calculations indicates that the most prominent emission in SnS 2 with sulfur vacancies is not due to luminescence from a defect level but involves recombination of excitons bound to neutral V S in SnS 2 . These results provide insight into the intrinsic and defect-related optoelectronic properties of Sn chalcogenide semiconductors.

36 MATERIALS SCIENCE↗

A Finite Difference informed Random Walk solver for simulating radiation defect evolution in polycrystalline structures with strongly inhomogeneous diffusivity

Diffusivity of species and defects on grain boundaries is usually several orders of magnitude larger than that inside grains. Such strongly inhomogeneous diffusivity requires prohibitively high computational demands for modeling microstructural evolution. Here, this paper presents a highly-efficient numerical solver, combining the Finite Difference method and Random Walk model, designed for accurately modeling strongly inhomogeneous diffusion within polycrystalline structures. The proposed solver, termed Finite Difference informed Random Walk (FDiRW), integrates a customized Finite Difference (cFD) scheme tailored for fast diffusion along thin grain boundaries represented by a single-layer of nodes. Numerical experiments demonstrate that the FDiRW solver achieves an impressive efficiency gain of 1560x compared to traditional Finite Difference methods while maintaining accuracy, making it feasible for personal computer machines to handle diffusional systems with strongly inhomogeneous diffusivity across static polycrystalline microstructures. The model has been successfully applied to simulate radiation defect evolution, showcasing its scalability to engineering scales in both length and time dimensions.

36 MATERIALS SCIENCE↗

Temperature dependence of the atomic structure and electrical activity of defects in ZnSb thermoelectric lightly doped with copper

A model for describing the temperature dependence of the defect microstructure in high-efficiency ZnSb thermoelectric with a copper content of 0.1 at % is chosen. The temperature dependences of the chargecarrier density and mobility for thermal cycle I (300–700–300 K) are analyzed taking into account the features of the crystal structure and covalent chemical bond in ZnSb. The basic defect structure (at temperatures of T = 560–605 K) is the state when all Cu atoms are equally distributed between sites of both sublattices and behave as acceptors, and the number of intrinsic donor and acceptor defects is much smaller. The effect of the latter becomes noticeable when the temperature goes beyond the above-mentioned range. At T > 605 K, extra acceptors (antisite Zn{sub Sb}) occur; upon cooling below 560 K, Cu{sub 2} dimers arise and the electrical activity of the impurity lowers. Dimer decay upon heating leads to growth in the concentration with temperature up to saturation in the above-mentioned range. Additional thermal cycles II–VIII are performed; the observed changes in the temperature dependences of the hole concentration and mobility are discussed in the context of the investigated model.

36 MATERIALS SCIENCE↗

Energetics and Concentration of Defects in Gd2Ti2O7 and Gd2ZrO7 Pyrochlore at High Pressure

Using first-principles calculations and complementary experiments, the defect formation energies and defect concentrations were calculated as a function of pressure. The results show that at high pressure, the defect formation energies decrease with pressure for both systems. In Gd{sub 2}Ti{sub 2}O{sub 7}, the dominant defect type is cation anti-site defect, the local structure around a defect is highly distorted, and the energetically favorable defect-defect interactions at shorter distance suggest the possibility of defect clustering. In Gd{sub 2}Zr{sub 2}O{sub 7}, anion Frenkel-pair defects are favored at all pressures and the dominant defect type involving a cation is a coupled defect of a cation anti-site and an anion Frenkel-pair defect. There are only minor distortions around the defects, and the defect-defect interactions are weak, which suggests almost-ideal non-interacting defect formation. Comparison of experimentally observed defect concentrations and those based on the calculated defect formation energies suggests that the defects formed at high pressure are better estimated with a concentrated limit approximation, while those formed at ambient pressure can be evaluated at a dilute limit approximation.

36 MATERIALS SCIENCE↗