Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface morphologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Preparation of highly ordered growth of single-crystalline Gd{sub 2}O{sub 2}S:Eu{sup 3+} nanostructures

Graphical abstract: Fabrication of highly ordered single-crystalline Gd{sub 2}O{sub 2}S:Eu{sup 3+} nanostructures over a porous anodized aluminum oxide (AAO) template via hydrothermal method is described. Well aligned non-collapsed Gd{sub 2}O{sub 2}S:Eu{sup 3+} nanostructures are ideal functional components for next generation luminescent devices. Research highlights: {yields} Synthesis of highly ordered Gd{sub 2}O{sub 2}S:Eu{sup 3+} nanotubes, nanorods and nanoflowers. {yields} Using template-assisted (AAO) hydrothermal method. {yields} Well aligned nanostructures for next generation luminescent devices. {yields} Detailed structural, morphology and the phase composition were studied. -- Abstract: A simple and facile template-assisted hydrothermal route has been demonstrated for the shape-selective preparation of highly ordered single-crystalline Gd{sub 2}O{sub 2}S:Eu{sup 3+} nanostructures, such as nanotubes, nanorods and nanoflowers. These fabricated nanostructures possess desirable atomic structures, surfaces, morphologies and properties to meet the growing demands and specific requirements of new technologies. The concentration of precursor chemicals, the temperature, the reaction time, and the use of a capping agent are key factors in the morphological control of Gd{sub 2}O{sub 2}S:Eu{sup 3+} nanostructures. The morphology and the phase composition of the prepared nanostructures were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), energy disperse spectroscopy (EDS) and photoluminescence (PL). We believe this technique will be readily adopted in realizing other forms of various nanostructured materials.

36 MATERIALS SCIENCE↗

Study on mechanically alloyed tin telluride screen-printed films for optoelectronic device applications

Narrow band gap semiconductor tin telluride (SnTe) was synthesized by mechanical alloying and its film was deposited on glass substrates by the economically and commercially feasible screen-printing technique. Deposition of the film was followed by sintering. Different analytical techniques were utilized to study the structure, surface morphology, elemental, optical and electrical characteristics of the film. X-ray diffraction analysis confirms that the film is polycrystalline in nature and exhibits rock salt type structure with preferred orientation of grains along (200) direction. EDAX spectrum confirms the presence of Sn and Te elements in the film. SEM image shows that the film exhibits uniform surface. The energy band gap of the film was determined by reflection spectra. The film is found to have a direct band gap of 0.37 eV. The dark electrical conductivity and activation energy of the film were measured in temperature range 300–380 K. Hall Effect measurement indicates that the film has p-type electrical conductivity.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Nanocrystalline immobilised ZnO photocatalyst for degradation of benzoic acid and methyl blue dye

Highlights: • ZnO thin films were successfully prepared with the help of chemical spray pyrolysis technique. • Study the effect of thickness variation(solution quantity) onto the various properties of film. • Film prepared at 1.65 μm thickness showsthe maximum photoelectrochemical performance in 0.1 M NaOH electrolyte. • The flat band potential of optimized ZnO thin film is –0.86 V/SCE. • Study degradation result of benzoic acidand methyl blue dye using ZnO photoelectrode under UV light illumination. - Abstract: ZnO thin films were deposited with different solution quantities using spray pyrolysis technique. The effect of thickness variations on photoelectrochemical (PEC), structural, morphological and optical properties are studied. PEC measurements showed maximum photo response about I{sub sc} = 0.485 mA and V{sub oc} = 632 mV at 1.65 μm film thickness. X-ray diffraction study confirms that the films are polycrystalline with hexagonal crystal structure. Hexagonal shaped grains are observed conformed from surface morphology. The estimated bandgap energy of ZnO films are varies between 3.23 to 3.29 eV. Finally large area (10 × 10 cm{sup 2}) deposited ZnO photoelectrode were used to study the photocatalytic and photoelectrocatalytic degradation of benzoic acid (BA) and methyl blue (MB) dye under UV radiation. Photoelectrocatalytic degradation result shows 65.7% degradation of BA and for colorant organic compound such as MB dye is about 98.1% is possible. The mineralization of pollutants are studied by measuring chemical oxygen demand (COD) values.

36 MATERIALS SCIENCE↗

Influence of O2-induced surface roughening on the chemistry of water on TiO2(110)

The impact of oxygen induced regrowth of TiO2 on the reduced rutile TiO2(110) surface has been studied using temperature programmed desorption (TPD) of adsorbed water multilayers. Pre-exposure of UHV annealed TiO2(110) surfaces to O2 at temperatures from 300 to 850 K induced changes in subsequent water TPDs that were interpreted in terms of the rougher surface morphologies resulting from the regrowth process. Water TPD from TiO2(110) previously oxidized at 300 K exhibited a new peak at *312 K due to reaction of water with O adatoms. These O adatoms were produced by dissociative adsorption of O2 at O-vacancy sites. Additionally, oxygen reacted (slowly) with surface Ti2O3 strands at RT. Water TPD from surfaces pre-oxidized at higher temperatures (P500 K) exhibited features reflective of desorption from rough surfaces, namely loss of peak resolution and eventual merger of the second layer and ice peaks, formation of a high temperature tail on the second layer peak, and broadening of the first layer TPD peak. The multiplicity of kinetically different adsorption sites on the roughened TiO2(110) surfaces contributed to the widening of the desorption features. Published by Elsevier B.V.

36 MATERIALS SCIENCE↗

TiN diffusion barrier for stable W/SiC(0001) interfaces in inert ambient at high temperature

The effect of high-temperature annealing on tungsten (W) films deposited on silicon carbide (SiC) with and without a titanium nitride (TiN) diffusion barrier was examined as a function of time. Evolutions in phase composition, surface morphology, and roughness from annealing at 1273 K were investigated for up to 24 h. Without a TiN diffusion barrier, solid state reactions between the W film and SiC substrate led to the formation of W 5 Si 3 , W 2 C, and WC species and the rise of an inhomogeneous surface structure that was initially web-like and later discontinuous. Severe roughening on the order of the initial film thickness was observed. Incorporation of a 100 nm TiN diffusion barrier suppressed the formation of W 5 Si 3 and W 2 C and only trace WC could be detected due to species diffusion through TiN grain boundaries. Changes in the surface structure and roughness were minimal. Our results warrant consideration of TiN as an effective diffusion barrier for W on SiC systems where structural stability at high temperatures is highly desired.

36 MATERIALS SCIENCE↗

Structural and magnetic properties of NiZn-ferrite thin films prepared by radio frequency magnetron sputtering

Polycrystalline NiZn-ferrite thin films were deposited on Si(100) substrate by rf magnetron sputtering, using targets with a nominal composition of Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4}. The effects of substrate condition, sputtering pressure, and postannealing on the structure and magnetic properties of thin films have been investigated. Our results show that the preferred orientation of the NiZn spinel film changed from (311) to (400) with increasing the Ar pressure from 0.8 to 1.6 Pa, meanwhile, the grain size also increased. Atomic force microscopy analysis indicates that perfect surface morphology of the film can be obtained at a relatively lower sputtering pressure of 1.0 Pa. The relative percentage of residual oxygen increases significantly on a condition of lower sputtering pressure, and plays an important role in film structure due to the strong molecular adsorption tendency of oxygen on the film surface during the deposition process. A thin film with a typical thickness of 1 {mu}m, a saturation magnetization of 150 emu/cm{sup 3}, and a coercivity of 8.8 kA/m has been obtained after annealing at 800 deg. C, which has the potential application in magnetic integrated circuits.

36 MATERIALS SCIENCE↗

Enhanced Magneto-optical and Photocatalytic Properties of Ferromagnetic Mg{sub 1−y}Ni{sub y}Fe{sub 2}O{sub 4} (0.0 ≤ y ≤ 1.0) Spinel Nano-ferrites

Spinel Mg{sub 1−y}Ni{sub y}Fe{sub 2}O{sub 4} (0.0 ≤ y ≤ 1.0) ferrite magnetic nanoparticles (MNPs) were synthesized by a sol-gel combustion method using urea as the reducing agent/fuel. Powder X-ray diffraction (XRD) analysis revealed the formation of cubic spinel Mg{sub 1−y}Ni{sub y}Fe{sub 2}O{sub 4} powders and confirmed pure crystalline phase and the average crystalline size of 21.25 to 17.04 nm. Functional group bonds between metal and oxygen (M–O) were confirmed by Fourier transform infrared (FT-IR) spectra. The microstructure of the powders was recorded by high-resolution scanning electron microscope (HR-SEM) and confirmed the particle-like surface morphology with smaller agglomeration, due to the magnetic interaction of the particles. Energy-dispersive X-ray (EDX) results showed the composition of the expected elements and confirmed the phase purity of the products. Vibrating sample magnetometer (VSM) technique recorded at room temperature was used to analyse the magnetic properties of the samples and the hysteresis loops showed the ferromagnetic behaviour. Moreover, the samples Mg{sub 1−y}Ni{sub y}Fe{sub 2}O{sub 4} NPs were tested for the photocatalytic degradation (PCD) of methylene blue (MB) dye and the sample y = 0.6 showed maximum degradation efficiency (96.83 %), due to the smaller particle size with higher surface area than other compositions. Furthermore, spinel Mg{sub 1−y}Ni{sub y}Fe{sub 2}O{sub 4} nano-photocatalysts can be reused several times without change of its catalytic activity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fabrication for multilayered composite thin films by dual-channel vacuum arc deposition

A flexible dual-channel curvilinear electromagnetic filter has been designed and constructed to fabricate multilayered composite films in vacuum arc ion plating. The filter possesses two guiding channels and one mixing unit. Multilayered TiN/AlN and TiAlN composite films can be produced by controlling the frequency or interval of the two cathodes. The x-ray photoelectron spectroscopy and low-angle x-ray diffraction results reveal the periodic Ti and Al structures in the TiN/AlN films. The TiAlN films exhibit a smooth surface morphology confirming effective filtering of macroparticles by the filter. High temperature oxidation conducted at 700 deg. C for an hour indicates that the weight increment in the TiAlN films produced by the dual filter is only half of that of the TiAlN films produced without a filter, thereby showing better resistance against surface oxidation.

36 MATERIALS SCIENCE↗

Large-angle illumination STEM: Toward three-dimensional atom-by-atom imaging

To completely understand and control materials and their properties, it is of critical importance to determine their atomic structures in all three dimensions. Recent revolutionary advances in electron optics – the inventions of geometric and chromatic aberration correctors as well as electron source monochromators – have provided fertile ground for performing optical depth sectioning at atomic-scale dimensions. In this study we theoretically demonstrate the imaging of top/sub-surface atomic structures and identify the depth of single dopants, single vacancies and the other point defects within materials by large-angle illumination scanning transmission electron microscopy (LAI-STEM). The proposed method also allows us to measure specimen properties such as thickness or three-dimensional surface morphology using observations from a single crystallographic orientation.

36 MATERIALS SCIENCE↗

Pb 2+ –Calcite Interactions under Far-from-Equilibrium Conditions: Formation of Micropyramids and Pseudomorphic Growth of Cerussite

The presence of impurity ions is known to significantly influence mineral surface morphology during crystal growth from aqueous solution, but knowledge on impurity ion-mineral interactions during dissolution under far-from equilibrium conditions remains limited. Here we show that calcite (CaCO 3 ) exhibits a rich array of dissolution features in the presence of Pb. During the initial stage, calcite exhibits non-classical surface features characterized as micro pyramids developed spontaneously in acidic Pb-bearing solutions. Subsequent pseudomorphic growth of cerussite (PbCO 3 ) was observed, where nucleation occurred entirely within a pore space created by dissolution at the calcite/substrate interface. Uneven growth rates yielded a cerussite shell made of lath- or dendritic-shaped crystals. The cerussite phase was separated from the calcite by pores of less than 200 nm under transmission X-ray microscopy, consistent with the interface-coupled dissolution-precipitation mechanism. These results show that impurity metal ions exert significant control over the microscale dissolution features found on mineral surfaces and provide new insights into interpreting and designing micro structures observed in naturally-occurring and synthetic carbonate minerals by dissolution. In addition, heterogeneous micro-environments created in transport limited reactions under pore spaces may lead to unusual growth forms during crystal nucleation and precipitation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Annealing effects on structural, electrical and optical properties of antimony-tinoxide thin films deposited by sol gel dip coating technique

Antimony-doped tin dioxide possess interesting physical and chemical properties. These properties have a wide range of applications such as catalysis and optoelectronic devices. In the present study, antimony-doped tin oxide (SnO2:Sb) thin films were deposited on the quartz substrates by sol-gel dip coating technique. The films were annealed at temperatures 350°C, 550°C and 850°C in air for 2 hours. The structure and surface morphologies were observed by X-ray diffraction (XRD) and Scanning electron microscopy (SEM). XRD patterns shows tetragonal structure for the SnO2:Sb films annealed at different temperatures. Crystallite size increased from 6 to 14 nm as annealing temperature increased from 350°C to 850°C. SEM studies reveals crack free and smooth surface for all the films. The grains are found to be homogenously distributed for films annealed at higher temperature. The electrical conductivity of the films annealed at 350°C and 550°C decreased and increased for the films annealed at 850°C. The optical properties of the films were investigated in the UV-visible-NIR region (200-900 nm) using UV spectra. The transmittance of the films decreased for films annealed at higher temperature. The optical energy band gap values (4.13 eV-4.83 eV) increased with the increase in annealing temperature.

36 MATERIALS SCIENCE↗

Effect of laser beam parameters on magnetic properties of Nd-Fe-B thick-film magnets fabricated by pulsed laser deposition

The effects of varying the laser power and the spot diameter of a laser beam on the magnetic properties, morphology, and deposition rate of Nd-Fe-B thick-film magnets fabricated by pulsed laser deposition (PLD) were investigated. Reducing the laser fluence on the target reduces the remanence and increases the Nd content and consequently the coercivity of the prepared films. The spot size of the laser beam was found to affect the film surface morphology, the deposition rate, and the reproducibility of the magnetic properties of the prepared films. Reducing the spot size reduces the number of droplets and the reproducibility of the magnetic properties and increases the droplet size. Controlling the spot size of the laser beam enabled us to maximize the deposition rate. Consequently, a coercivity of 1210 kA/m and a remanence of 0.51 T were obtained at a deposition rate of 11.8 {mu}m/(h{center_dot}W). This deposition rate is 30% greater than the highest previously reported deposition rate by PLD.

36 MATERIALS SCIENCE↗

Physical and Electrochemical Characterization of Aluminum Electrodes during Electrocoagulation

Electrocoagulation (EC) of synthetic groundwater was conducted using a sacrificial aluminum electrode in a flow-through EC reactor with short retention times (<1 min) under varying hydrodynamic and electrochemical conditions. The treated water was allowed to settle for 24 h and achieved silicate removal of up to 50 ± 4%, and hardness removal of 11 ± 1%. Physical, chemical, and electrochemical characterization was performed to explore changes in electrode surface morphology and composition. Electrochemical impedance spectroscopy (EIS) showed that chemical reactions at the electrode/water interface are sensitive to changes in the immediate chemical environment. We demonstrate that the most energy-intensive step in EC is aluminum dissolution at the anode, which remained fairly constant due to the continuous renewal of the anode’s surface, a result of aluminum dissolution. At the cathode, a structural change in the oxide layer, from γ-Al 2 O 3 to gibbsite, was detected by grazing-incidence X-ray diffraction, which decreased the resistance to charge transfer at the cathode surface, resulting in decreased electrode resistance. The high flow rate in the system minimized the accumulation of aluminum hydroxide solids and aluminum ions at the electrode/water interface, which minimized the formation of thick scalants and amorphous Al(OH) 3 on the cathode and anode, respectively. In conclusion, it was further demonstrated by EIS that under these conditions the resistance to charge transfer was constant throughout the duration of the experiment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular-Beam Epitaxy of Two-Dimensional GaSe Layers on GaAs(001) and GaAs(112) Substrates: Structural and Optical Properties

The results of studies of the structural and optical properties of two-dimensional GaSe layers grown by molecular-beam epitaxy on GaAs(001) and GaAs(112) substrates using a valve cracking cell for the Se source are reported. The influence of the MBE growth parameters (the substrate temperature, Ga flux intensity, Se/Ga incident flux ratio) on the surface morphology of the layers is studied. By means of transmission electron microscopy, electron diffraction technique, and Raman spectroscopy, it is shown that the structure of the GaSe layers corresponds to the γ-GaSe polytype. From X-ray diffraction analysis, it is established that there exist α-Ga{sub 2}Se{sub 3} inclusions in the GaSe layers grown under conditions of high enrichment of the growth surface with Se.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Observation of crystallization and characterizations on thiourea cadmium iodide: A semi-organic optical material

Graphical abstract: - Highlights: • Thiourea cadmium iodide (TCI) was grown by slow evaporation solution technique. • Morphology and growth rate of the grown compound are determined with the help of inverted microscope. • Optical band gap has been determined. • Microstructure analysis has been reported. • Electrical study has been reported and discussed. - Abstract: In this work, the single crystals of thiourea cadmium iodide were grown by slow evaporation solution technique in two different ratios 2:1 and 1:1. During the formation of their single crystals the morphological features and its live growth process were recorded with the help of inverted microscope. Structural studies of the grown crystals have been carried out by powder X-ray diffraction to confirm the crystal system and vibrational modes by Raman spectroscopy. The optical energy band gaps were investigated through UV–vis spectroscopy study. The surface morphology of the grown single crystals was analyzed by using Scanning Electron Microscope and thermal analysis was carried out by using thermogravimetric analysis. The electrical properties were also studied as a function of frequency and the obtained results are discussed.

36 MATERIALS SCIENCE↗

Thermal Degradation of Single Crystal Zinc Oxide and the Growth of Nanostructures

Heat treatment of (0001) single crystal zinc oxide (ZnO) seems to degrade the surface morphology at high temperature. The degradation, however, does not suppress the growth of ZnO nanostructures on selective regions of the single crystal ZnO that have been sputtered with metallic zinc (Zn) and annealed at 800 degree sign C. On the uncoated regions, no growth occurs but the presence of pits suggests material loss from the surface. The formation of ZnO nanostructures on the selective regions could be aided by the preferential loss of oxygen as well as zinc suboxides from the uncoated regions. Indirect evidence of the role of oxygen and zinc suboxides can be inferred from the formation of nickel zinc oxide Ni{sub 0.9}Zn{sub 0.1}O and nickel oxide NiO{sub 2} when Zn is replaced by Ni and annealed under similar conditions.

36 MATERIALS SCIENCE↗

Effect of nitrogen doping on wetting and photoactive properties of laser processed zinc oxide-graphene oxide nanocomposite layers

Zinc oxide-graphene oxide nanocomposite layers were submitted to laser irradiation in air or controlled nitrogen atmosphere using a frequency quadrupled Nd:YAG (λ = 266 nm, τ{sub FWHM} ≅ 3 ns, ν = 10 Hz) laser source. The experiments were performed in air at atmospheric pressure or in nitrogen at a pressure of 2 × 10{sup 4} Pa. The effect of the irradiation conditions, incident laser fluence value, and number of subsequent laser pulses on the surface morphology of the composite material was systematically investigated. The obtained results reveal that nitrogen incorporation improves significantly the wetting and photoactive properties of the laser processed layers. The kinetics of water contact angle variation when the samples are submitted to laser irradiation in nitrogen are faster than that of the samples irradiated in air, the surfaces becoming super-hydrophilic under UV light irradiation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quantification of waste morphology in Martian fretted terrain

Qualitative and quantitative analyses are performed on the northern fretted terrain of the Martian Isnenius Lacus quadrangle to determine the formation processes. The fretted terrain lies between 35-50 deg N latitude and 305-350 deg W longitude and was mapped with Viking orbiter instrumentation. The dominant landforms are a sequence of heavily cratered terrain, scattered flat-floored, fretted valleys, linear waste-covered valleys between flat-topped mesas, circum-mesa debris areas, a transition from mesas to knobby terrain, fewer upland forms, and low-relief, mantled, polar plains. The features spread out from a cratered terrain boundary in a succession of shapes. A principal components analysis characterizes definable spatial variations in the surface morphology and suggests that the features are youngest in the southwest direction. Relationships are also found between neighboring features. The principal components analysis technique is concluded to be a valuable tool for explaining the geomorphic evolution of the Martian surface.

Kochel, R. C.↗