Search NASA⌕ Search

SEARCH · Search NASA

Results for “test correlation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Test to Extract Soil Properties Using the Seismic HammerTM Active Seismic Source

Geologic material properties are necessary parameters for ground motion modeling and are difficult and expensive to obtain via traditional methods. Alternative methods to estimate soil properties require a measurement of the ground's response to a force. A possible method of obtaining these measurements is active-source seismic surveys, but measurements of the ground response at the source must also be available. The potential of seismic sources to obtain soil properties is limited, however, by the repeatability of the source. Explosives, and hammer surveys are not repeatable because of variable ground coupling or swing strength. On the other hand, the Seismic Hammer TM (SH) is consistent in the amount of energy it inputs into the ground. In addition, it leaves large physical depressions as a result of ground compaction. The volume of ground compaction varies by location. Here, we hypothesize that physical depressions left in the earth by the SH correlate to energy recorded by nearby geophones, and therefore are a measurement of soil physical properties. Using measurements of the volume of shot holes, we compare the spatial distribution of the volume of ground compacted between the different shot locations. We then examine energy recorded by the nearest 50 geophones and compare the change in amplitude across hits at the same location. Finally, we use the percent difference between the energy recorded by the first and later hits at a location to test for a correlation to the volume of the shot depressions. We find that: * Ground compaction at the shot-depression does cluster geographically, but does not correlate to known surface features. * Energy recorded by nearby geophones reflects ground refusal after several hits. * There is no correlation to shot volume and changes in energy at particular shot locations. Deeper material properties (i.e. below the depth of surface compaction) may be contributing to the changes in energy propagation. * Without further processing of the data, shot-depression volumes are insufficient to understanding ground response to the SH. Without an accurate understanding of the ground response, we cannot extract material properties in conjunction with the SH survey. Additional processing including picking direct arrivals and static corrections may yield positive results.

58 GEOSCIENCES↗

Digital Twin Model for Advanced Manufacture of a Rotating Detonation Engine Injector

A digital twin material model (DTMM) of an additive manufacturing (AM) process was created to advance the state of the art in rotating detonation engine (RDE) injector design. Current RDE injectors are designed with large pressure drops, enabling a stable and repeatable combustion process. However, this comes at the cost of system efficiency. For the technology to transition to commercial fossil-based power generation, it is important to develop injectors with reduced flow losses. Low-loss injectors are difficult to design and manufacture with conventional manufacturing techniques. AM enables new design options, but the AM manufacturing process must be thoroughly understood to result in a robust design. A DTMM provides the necessary insight by defining the cause-effect relationships between process parameters, microstructure features, and properties. Therefore, a DTMM to support the design and manufacturing process was developed and applied to the design of a new additively manufactured low-loss injector. The injector combustion behavior was characterized through hot-fire tests, and mechanical performance was compared to the DTMM predictions. The two project goals were the successful development of the DTMM and the demonstration of an improved RDE injector design. The RDE injector design and DTMM developments occurred on parallel but dependent paths. The injector was designed to reduce pressure drop by increasing the cross-sectional flow area ratio between the injector air passages and the combustor annulus. This resulted in less structural material, raising the concern that thin members would be susceptible to high-cycle fatigue (HCF) under the periodic loading inherent to an RDE. It was most important for the DTMM to predict behavior in these features; therefore, the injector design concept guided the material thicknesses used in fatigue tests. The DTMM development started by manufacturing a series of coupons over the range of possible AM process variations. A design-of-experiment approach was used to select which process variable combinations gave the most efficient coverage relevant to the injector design space. The microstructure in each of these coupons was characterized, and then computational methods were used to create a numerical model of the correlation between process variables and microstructure. Next, a set of HCF samples were tested to calibrate existing models that map microstructure to HCF performance. Together, these two links formed the DTMM that calculates HCF behavior from AM process variables. Two injector prototypes were additively manufactured. The first injector design strategy aggressively pursued low-loss performance by substantially increasing the oxidizer flow area. The combination of manufacturing lead times and the fatigue testing schedule meant that the DTMM was not available when building this first prototype. Therefore, its process parameters were chosen based on a manual review of the available coupon data. This prototype was built successfully and evaluated in 58 combustion tests. Sustained detonation was achieved with remarkably reduced pressure loss, and some tests even displayed pressure loss characteristics similar to conventional gas turbine combustors. This achieved the project goal of improving RDE injector design. The second injector was manufactured according to the optimized parameters predicted by the DTMM. The flow area modifications of this injector were less aggressive than the first injector since demonstrating low pressure loss was not an objective of the second hot-fire test series. Rather, the test objective was to cause high cycle fatigue failure in the part due to periodic loading from the rotating detonation wave. The observed number of cycles to failure was to be compared to the number predicted by the DTMM and thereby assess the utility of the DTMM in component design. However, the required level of vibration was not obtained during combustion. Therefore, high cycle fatigue was not experienced in the hot-fire tests of the second injector. Fatigue data was obtained by further testing the second injector in a conventional HCF test apparatus. The injector demonstrated HCF strength above the DTMM prediction. In fact, it did not fail and testing was only discontinued due to reaching the end of the period of performance. This points to some success in the project’s primary goal of successfully developing and applying the DTMM to a component design. Implementing the DTMM recommendations for optimal processing parameters led to a part with acceptable properties. The DTMM was also shown to be an efficient correlator of data and to provide insight into the relationship between process settings, microstructure, and property performance. However, the failure of the DTMM prediction to match the experimental result of the injector fatigue test also points to the need to include significantly more data in the model development. In this project, coupons made with identical processing parameters exhibited drastically different properties from each other and from the injector part, which clearly influences the accuracy of a model that predicts performance based on parameters. Uncertainties in the build process must be quantified to develop more robust models. A denser and broader matrix of coupon process and geometry variations, several repeated builds of every point, more in-situ build process measurements, and direct observation of tensile and HCF sample microstructure (as opposed to separate microstructure specimens) are recommendations to improve future AM modeling efforts.

20 FOSSIL-FUELED POWER PLANTS↗

ωB97X-V: A 10-parameter, range-separated hybrid, generalized gradient approximation density functional with nonlocal correlation, designed by a survival-of-the-fittest strategy

A 10-parameter, range-separated hybrid (RSH), generalized gradient approximation (GGA) density functional with nonlocal correlation (VV10) is presented in this paper. Instead of truncating the B97-type power series inhomogeneity correction factors (ICF) for the exchange, same-spin correlation, and opposite-spin correlation functionals uniformly, all 16 383 combinations of the linear parameters up to fourth order (m = 4) are considered. These functionals are individually fit to a training set and the resulting parameters are validated on a primary test set in order to identify the 3 optimal ICF expansions. Through this procedure, it is discovered that the functional that performs best on the training and primary test sets has 7 linear parameters, with 3 additional nonlinear parameters from range-separation and nonlocal correlation. The resulting density functional, ωB97X-V, is further assessed on a secondary test set, the parallel-displaced coronene dimer, as well as several geometry datasets. Finally and furthermore, the basis set dependence and integration grid sensitivity of ωB97X-V are analyzed and documented in order to facilitate the use of the functional.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Investigating the process of white etching crack initiation in bearing steel

White etching cracks (WECs) have been identified as a dominant mode of premature failure within wind turbine gearbox bearings. Though WECs have been reported in the field for over a decade, the conditions leading to WECs, and the process by which this failure culminates, are both highly debated. In previously published work, the generation of WECs on a benchtop scale was linked to sliding at the surface of the test sample, it was also postulated that the generation of WECs was dependent on the cumulative energy that had been applied to the sample over the entirety of the test. In this paper, a three ring on roller bench top test rig is used to systematically alter the cumulative energy that a sample experiences through changes in normal load, sliding, and run time, in an attempt to correlate cumulative energy with the formation of WECs. It was determined that, in the current test setup, the presence of WECs can be predicted by this energy criterion. The authors then used this information to study the process by which WECs initiate. Lastly, it was found that, under the current testing conditions, the formation of a dark etching microstructure precedes the formation of a crack, and a crack precedes the formation of white etching microstructure.

17 WIND ENERGY↗

Relativistic generalization of Bell's inequalities in Wigner's form

A relativistic generalization of Bell's inequalities in Wigner's form was obtained for the decays of a pseudoscalar and a scalar particle to two particles having a nonzero spin (fermions and photons). Both inequalities involving a full anticorrelation of final-particle spins and having a nonrelativistic analog and inequalities involving a full correlation of spins are considered. It is shown that Bohr's complementarity principle may be tested experimentally in the relativistic region.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Multi-Channel Correlation Detectors: Accounting for and Reducing Non-target Detections [Slides]

Overwhelming non-target detections require more representative hypothesis test to target real events. Implicit signal model with convex-cone geometry includes both target waveforms and non-targets. New detector screens target waveforms from convex cone members that correlation detectors return. Proto-type detector returns analyst-equivalent detections, requires minimal modification from correlation detector, and has quantifiable detection performance, and satisfies all solution requirements to reduce false detections for GNDD.

54 ENVIRONMENTAL SCIENCES↗

Detection of thermal SZ-CMB lensing cross-correlation in Planck nominal mission data

The nominal mission maps from the Planck satellite contain a wealth of information about secondary anisotropies in the cosmic microwave background (CMB), including those induced by the thermal Sunyaev-Zel'dovich (tSZ) effect and gravitational lensing. As both the tSZ and CMB lensing signals trace the large-scale matter density field, the anisotropies sourced by these processes are expected to be correlated. We report the first detection of this cross-correlation signal, which we measure at 6.2σ significance using the Planck data. We take advantage of Planck's multifrequency coverage to construct a tSZ map using internal linear combination techniques, which we subsequently cross-correlate with the publicly-released Planck CMB lensing potential map. The cross-correlation is subject to contamination from the cosmic infrared background (CIB), which is known to correlate strongly with CMB lensing. We correct for this contamination via cross-correlating our tSZ map with the Planck 857 GHz map and confirm the robustness of our measurement using several null tests. We interpret the signal using halo model calculations, which indicate that the tSZ-CMB lensing cross-correlation is a unique probe of the physics of intracluster gas in high-redshift, low-mass groups and clusters. Our results are consistent with extrapolations of existing gas physics models to this previously unexplored regime and show clear evidence for contributions from both the one- and two-halo terms, but no statistically significant evidence for contributions from diffuse, unbound gas outside of collapsed halos. We also show that the amplitude of the signal depends rather sensitively on the amplitude of fluctuations (σ{sub 8}) and the matter density (Ω{sub m}), scaling as σ{sub 8}{sup 6.1}Ω{sub m}{sup 1.5} at ℓ = 1000. We constrain the degenerate combination σ{sub 8}(Ω{sub m}/0.282){sup 0.26} = 0.824±0.029, a result that is in less tension with primordial CMB constraints than some recent tSZ analyses. We also combine our measurement with the Planck measurement of the tSZ auto-power spectrum to demonstrate a technique that can in principle constrain both cosmology and the physics of intracluster gas simultaneously. Our detection is a direct confirmation that hot, ionized gas traces the dark matter distribution over a wide range of scales in the universe ( ∼ 0.1–50 Mpc/h)

79 ASTRONOMY AND ASTROPHYSICS↗

Non-Gaussianity constraints with anisotropic μ distortion measurements from Planck

ABSTRACT Primordial non-Gaussianity can source μ-distortion anisotropies that are correlated with the large-scale temperature and polarization signals of the cosmic microwave background (CMB). A measurement of μT and μE correlations can therefore be used to constrain it on wavelengths of perturbations not directly probed by the standard CMB anisotropies. We carry out a first rigorous search for μ-distortion anisotropies with Planck data, applying the well-tested constrained ILC component-separation method combined with the needlet framework. We correlate the reconstructed μ map with the CMB anisotropies to derive constraints on the amplitude fNL of the local form bispectrum, specifically on the squeezed configurations with effective wavenumbers $k_s \simeq {740}\, \mathrm{Mpc^{-1}}$ and $k_L \simeq {0.05}\, \mathrm{Mpc^{-1}}$, improving previously estimated constraints by more than an order of magnitude. This enhancement is owing to the fact that we are able to use the full multipole information by carefully controlling biases and systematic effects in the analysis. We also for the first time incorporate constraints from measurements of μE correlations, which further tighten the limits. A combination of the derived Planck μT and μE power spectra yields |fNL| ≲ 6800 (95 per cent c.l.) on this highly squeezed bispectrum. This is only ≃3 times weaker than the anticipated constraint from Litebird. Furthermore we show that a combination of Litebird with Planck can improve the expected future constraint by ${\simeq}20{{\%}}$. These limits can be used to constrain multifield inflation models and primordial black hole formation scenarios, thus providing a promising novel avenue forward in CMB cosmology.

Rotti, Aditya (ORCID:0000000341245226)↗

Effect of Plastic Deformation on Passivation Characteristics of Type 304 Stainless Steel

Electrochemical response of Type 304 stainless steel, with different levels of plastic deformation, was investigated in solutions containing different amounts of H{sub 2}SO{sub 4} and KSCN at room temperature. Potentiodynamic polarization and double-loop electrochemical potentiokinetic reactivation (DL-EPR) techniques were used to characterize different levels of plastic deformation. The results have indicated that DL-EPR values and passivation current density increased with increase in plastic deformation. The DL-EPR values were correlated well with hardness and fraction of strain-induced martensite. Attack during DL-EPR tests occurred on strain regions within the matrix such as dislocations in austenite and martensite and/or interface between austenite and martensite. No well-defined correlation was observed between the levels of plastic deformation and potentiodynamic polarization behavior.

36 MATERIALS SCIENCE↗

Conduct Performance Validation of the Electrodynamic Shield (EDS) Induced Cleaning Under Realistic Environmental Soiling Conditions: CRADA Number CRD-21-17861 (Cooperative Research and Development Final Report)

NREL will work with the Participant to perform accelerated long-term durability and other standard durability tests for prototypes to help demonstrate the reliability of the technology for PV applications. NREL will test commercially relevant-sized prototypes under realistic environmental soiling conditions to correlate dust removal efficacy for improving the PV output under standard solar conditions. Measurements will include voltage-current characterization in solar simulators before and after dust cleaning.

14 SOLAR ENERGY↗

Direct Feed Low Activity Waste Test Platform - Pretreatment Unit Operations - 18613

The Low-Activity Waste Pretreatment System (LAWPS) facility is planned to pretreat Hanford tank waste supernate by filtering solids and processing through ion exchange columns to remove cesium. Note that cesium ion exchange is not discussed in this paper. The filtration process is achieved through cross flow filtration using a stainless steel Mott filter with a 0.1-micron grade. The goal of this effort was to assess whether a batch, or dead end, filtration (DEF) device replicating the LAWPS cross flow filter could be employed to qualify each feed campaign prior to delivery to LAWPS. The objective for filtration feed qualification is to determine whether the cross flow filters deployed in LAWPS will remove solids while maintaining a de minimis flow rate of permeate. To that end, the DEF was tested with simulants and the results compared with those obtained from cross flow filtration tests. In addition, actual waste samples were retrieved from Hanford Site Tank AP-105 and were composited for testing. These composited samples were first tested with cross flow filtration to determine the filter flux under typical LAWPS conditions. The same material was subsequently tested with DEF to determine a filter flux. While the DEF correctly predicted the cross flow filter's ability to filter solids from the feed, there was limited correlation between DEF and cross flow filtration flux results. This lack of correlation suggests a fundamental difference between cross flow filtration and DEF as used in these tests. Taken in total, these results indicate that DEF is not a good candidate to provide qualification of feed for LAWPS cross flow filtration. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Structure–activity relationship-based chemical classification of highly imbalanced Tox21 datasets

Abstract The specificity of toxicant-target biomolecule interactions lends to the very imbalanced nature of many toxicity datasets, causing poor performance in Structure–Activity Relationship (SAR)-based chemical classification. Undersampling and oversampling are representative techniques for handling such an imbalance challenge. However, removing inactive chemical compound instances from the majority class using an undersampling technique can result in information loss, whereas increasing active toxicant instances in the minority class by interpolation tends to introduce artificial minority instances that often cross into the majority class space, giving rise to class overlapping and a higher false prediction rate. In this study, in order to improve the prediction accuracy of imbalanced learning, we employed SMOTEENN, a combination of Synthetic Minority Over-sampling Technique (SMOTE) and Edited Nearest Neighbor (ENN) algorithms, to oversample the minority class by creating synthetic samples, followed by cleaning the mislabeled instances. We chose the highly imbalanced Tox21 dataset, which consisted of 12 in vitro bioassays for > 10,000 chemicals that were distributed unevenly between binary classes. With Random Forest (RF) as the base classifier and bagging as the ensemble strategy, we applied four hybrid learning methods, i.e., RF without imbalance handling (RF), RF with Random Undersampling (RUS), RF with SMOTE (SMO), and RF with SMOTEENN (SMN). The performance of the four learning methods was compared using nine evaluation metrics, among which F 1 score, Matthews correlation coefficient and Brier score provided a more consistent assessment of the overall performance across the 12 datasets. The Friedman’s aligned ranks test and the subsequent Bergmann-Hommel post hoc test showed that SMN significantly outperformed the other three methods. We also found that a strong negative correlation existed between the prediction accuracy and the imbalance ratio (IR), which is defined as the number of inactive compounds divided by the number of active compounds. SMN became less effective when IR exceeded a certain threshold (e.g., > 28). The ability to separate the few active compounds from the vast amounts of inactive ones is of great importance in computational toxicology. This work demonstrates that the performance of SAR-based, imbalanced chemical toxicity classification can be significantly improved through the use of data rebalancing.

Idakwo, Gabriel↗

Pyrethroid insecticides: Isoform-dependent hydrolysis, induction of cytochrome P450 3A4 and evidence on the involvement of the pregnane X receptor

Pyrethroids account for more than one-third of the insecticides currently marketed in the world. In mammals, these insecticides undergo extensive metabolism by carboxylesterases and cytochrome P450s (CYPs). In addition, some pyrethroids are found to induce the expression of CYPs. The aim of this study was to determine whether pyrethroids induce carboxylesterases and CYP3A4, and whether the induction is correlated inversely with their hydrolysis. Human liver microsomes were pooled and tested for the hydrolysis of 11 pyrethroids. All pyrethroids were hydrolyzed by the pooled microsomes, but the hydrolytic rates varied by as many as 14 fold. Some pyrethroids such as bioresmethrin were preferably hydrolyzed by carboxylesterase HCE1, whereas others such as bifenthrin preferably by HCE2. In primary human hepatocytes, all pyrethroids except tetramethrin significantly induced CYP3A4. In contrast, insignificant changes were detected on the expression of carboxylesterases. The induction of CYP3A4 was confirmed in multiple cell lines including HepG2, Hop92 and LS180. Overall, the magnitude of the induction was correlated inversely with the rates of hydrolysis, but positively with the activation of the pregnane X receptor (PXR). Transfection of a carboxylesterase markedly decreased the activation of PXR, and the decrease was in agreement with carboxylesterase-based preference for hydrolysis. In addition, human PXR variants as well as rat PXR differed from human PXR (wild-type) in responding to certain pyrethroids (e.g., lambda-cyhalothrin), suggesting that induction of PXR target genes by these pyrethroids varies depending on polymorphic variants and the PXR species identity.

60 APPLIED LIFE SCIENCES↗

Multilevel Monte Carlo simulation of Coulomb collisions

We present a new, for plasma physics, highly efficient multilevel Monte Carlo numerical method for simulating Coulomb collisions. The method separates and optimally minimizes the finite-timestep and finite-sampling errors inherent in the Langevin representation of the Landau–Fokker–Planck equation. It does so by combining multiple solutions to the underlying equations with varying numbers of timesteps. For a desired level of accuracy ε, the computational cost of the method is O(ε{sup −2}) or O(ε{sup −2}(lnε){sup 2}), depending on the underlying discretization, Milstein or Euler–Maruyama respectively. This is to be contrasted with a cost of O(ε{sup −3}) for direct simulation Monte Carlo or binary collision methods. We successfully demonstrate the method with a classic beam diffusion test case in 2D, making use of the Lévy area approximation for the correlated Milstein cross terms, and generating a computational saving of a factor of 100 for ε=10{sup −5}. We discuss the importance of the method for problems in which collisions constitute the computational rate limiting step, and its limitations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Centrality and pseudorapidity dependence of the transverse energy density in p Pb collisions at s N N = 5.02 TeV

The almost hermetic coverage of the CMS detector is used to measure the distribution of transverse energy, E T , over 13.2 units of pseudorapidity, η, for p Pb collisions at a center-of-mass energy per nucleon pair of s NN = 5.02 TeV. The huge angular acceptance exploits the fact that the CASTOR calorimeter at -6.6 < η < -5.2 is effectively present on both sides of the colliding system because of a switch in the proton-going and lead-going beam directions. This wide acceptance enables the study of correlations between well-separated angular regions and makes the measurement a particularly powerful test of event generators. For minimum bias p Pb collisions the maximum value of dE T / d η is 22GeV, which implies an E T per participant nucleon pair comparable to that of peripheral PbPb collisions at s NN =2.76TeV. The increase of dE T / d η with centrality is much stronger for the lead-going side than for the proton-going side. The η dependence of dE T / d η is sensitive to the η range in which the centrality variable is defined. Several modern generators are compared to these results but none is able to capture all aspects of the η and centrality dependence of the data and the correlations observed between different η regions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

On the multi-temporal correlation between photosynthesis and soil CO2 efflux: reconciling lags and observations.

Although there is increasing evidence of the temporal correlation between photosynthesis and soil CO{sub 2} efflux, no study has so far tested its generality across the growing season at multiple study sites and across several time scales. Here, we used continuous (hourly) data and applied time series analysis (wavelet coherence analysis) to identify temporal correlations and time lags between photosynthesis and soil CO{sub 2} efflux for three forests from different climates and a grassland. Results showed the existence of multi-temporal correlations at time periods that varied between 1 and 16 d during the growing seasons at all study sites. Temporal correlations were strongest at the 1 d time period, with longer time lags for forests relative to the grassland. The multi-temporal correlations were not continuous throughout the growing season, and were weakened when the effect of variations in soil temperature and CO{sub 2} diffusivity on soil CO{sub 2} efflux was taken into account. Multi-temporal correlations between photosynthesis and soil CO{sub 2} efflux exist, and suggest that multiple biophysical drivers (i.e. photosynthesis, soil CO{sub 2} diffusion, temperature) are likely to coexist for the regulation of allocation and transport speed of carbon during a growing season. Future studies should consider the multi-temporal influence of these biophysical drivers to investigate their effect on the transport of carbon through the soil-plant-atmosphere continuum.

54 ENVIRONMENTAL SCIENCES↗

Understanding the EMC effect with tagged DIS measurements

Understanding the modification of quarks in nucleons within nuclei (EMC effect) is a longstanding open question in nuclear physics. Recent experimental results from electron scattering at Jefferson Lab strengthen the correlation between the EMC effect and short- range correlated pairs (SRC) of nucleons in nuclei. That means that the EMC effect is probably driven by the high-momentum highly-virtual nucleons of the SRC pairs. This connection can be tested experimentally by measuring electron deep inelastic scattering from a nucleon and detecting its correlated SRC partner nucleon (tagging). This allows us to measure the quark modification of high-momentum nucleons. Two tagged experiments on deuterium are underway at Jefferson Lab of which one already took data and the other will take data in the upcoming years. In my talk, I will present the current knowledge of the EMC effect and its correlation to SRC pair and the status of the tagged measurements at Jefferson Lab.

Hauenstein, Florian↗

Understanding the EMC effect with tagged DIS measurements

Understanding the modification of quarks in nucleons within nuclei (EMC effect) is a longstanding open question in nuclear physics. Recent experimental results from electron scattering at Jefferson Lab strengthen the correlation between the EMC effect and short- range correlated pairs (SRC) of nucleons in nuclei. That means that the EMC effect is probably driven by the high-momentum highly-virtual nucleons of the SRC pairs. This connection can be tested experimentally by measuring electron deep inelastic scattering from a nucleon and detecting its correlated SRC partner nucleon (tagging). This allows us to measure the quark modification of high-momentum nucleons. Two tagged experiments on deuterium are underway at Jefferson Lab of which one already took data and the other will take data in the upcoming years. In my talk, I will present the current knowledge of the EMC effect and its correlation to SRC pairs, the status of the tagged measurements at Jefferson Lab, and simulation results for tagged measurements at the EIC.

Hauenstein, Florian↗