Search NASA⌕ Search

SEARCH · Search NASA

Results for “zircon”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Semi-insulating Sn-Zr-O: Tunable resistance buffer layers

Highly resistive and transparent (HRT) buffer layers are critical components of solar cells and other opto-electronic devices. HRT layers are often undoped transparent conducting oxides. However, these oxides can be too conductive to form an optimal HRT. Here, we present a method to produce HRT layers with tunable electrical resistivity, despite the presence of high concentrations of unintentionally or intentionally added dopants in the film. This method relies on alloying wide-bandgap, high-k dielectric materials (e.g., ZrO{sub 2}) into the host oxide to tune the resistivity. We demonstrate Sn{sub x}Zr{sub 1−x}O{sub 2}:F films with tunable resistivities varying from 0.001 to 10 Ω cm, which are controlled by the Zr mole fraction in the films. Increasing Zr suppresses carriers by expanding the bandgap almost entirely by shifting the valence-band position, which allows the HRT layers to maintain good conduction-band alignment for a low-resistance front contact.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Centrality measures highlight proton traps and access points to proton highways in kinetic Monte Carlo trajectories

A centrality measure based on the time of first returns rather than the number of steps is developed and applied to finding proton traps and access points to proton highways in the doped perovskite oxides: AZr{sub 0.875}D{sub 0.125}O{sub 3}, where A is Ba or Sr and the dopant D is Y or Al. The high centrality region near the dopant is wider in the SrZrO{sub 3} systems than the BaZrO{sub 3} systems. In the aluminum-doped systems, a region of intermediate centrality (secondary region) is found in a plane away from the dopant. Kinetic Monte Carlo (kMC) trajectories show that this secondary region is an entry to fast conduction planes in the aluminum-doped systems in contrast to the highest centrality area near the dopant trap. The yttrium-doped systems do not show this secondary region because the fast conduction routes are in the same plane as the dopant and hence already in the high centrality trapped area. This centrality measure complements kMC by highlighting key areas in trajectories. The limiting activation barriers found via kMC are in very good agreement with experiments and related to the barriers to escape dopant traps.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of Zr{sup 4+} doping on structural and electrical properties of SrBi{sub 4}Ti{sub 4}O{sub 15} ceramic

This article reports a systematic study of doping effects on the structural and electrical properties of layer structured strontium bismuth titanate ceramic. In this study monophasic SrBi{sub 4}Ti{sub 4-x}Zr{sub x}O{sub 15} with x=0.00, 0.05, 0.10, 0.15, 0.20, 0.25 ceramics were synthesized from the solid-state reaction route. X-ray diffraction analysis shows that the Zr-modified SBT ceramics have a pure four-layer Aurivillius phase structure. Dielectric properties revealed that the diffuseness of phase transition increases where as corresponding permittivity value decrease with increasing Zr content. Piezoelectric properties of SBTZ ceramics were improved by the modification of Zirconium ion. Moreover, the reason behind for improvement of piezoelectric properties of modified SBTZ ceramics was also discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Elastic properties of perovskite ATiO{sub 3} (A = Be, Mg, Ca, Sr, and Ba) and PbBO{sub 3} (B = Ti, Zr, and Hf): First principles calculations

The mechanical properties of perovskite oxides depend on two metal oxide lattices that are intercalated. This provides an opportunity for separate tuning of hardness, Poisson's ratio (transverse expansion in response to the compression), and shear strength. The elastic constants of series of perovskite oxides were studied by first principles approach. Both A-site and B-site cations were systematically varied in order to see their effects on the elastic parameters. To study the effects of A-site cations, we studied the elastic properties of perovskite ATiO{sub 3} for A being Be, Mg, Ca, Sr, or Ba, one at a time. Similarly, for B-site cations, we studied the elastic properties of PbBO{sub 3} for B being Ti, Zr, or Hf, one at a time. The density functional first principles calculations with local density approximation (LDA) and generalized gradient approximation (GGA) were employed. It is found that the maximum C{sub 11} elastic constant is achieved when the atomic size of the cations at A-site and B-site are comparable. We also found that C{sub 12} elastic constant is sensitive to B-site cations while C{sub 44} elastic constant is more sensitive to A-site cations. Details and explanations for such dependencies are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Atomic disorder in Gd 2 Zr 2 O 7 pyrochlore

Gd 2 Zr 2 O 7 pyrochlore with different degrees of cation disorder were synthesized by isothermal annealing at various temperatures (1100–1550 °C), and the related changes in the structure were investigated by ambient and high pressure x-ray diffraction (XRD) measurements. Unit cell parameters increase almost linearly with increasing treatment temperature. The degree of cation order in pyrochlore also increases with the increase of temperature, but saturates at ~60%. The compressibility of the pyrochlore structures decreases when the degree of cation order increases. Lastly, high pressure XRD measurements also indicate that the phase stability of Gd 2 Zr 2 O 7 is not very sensitive to the degree of atomic disorder in the pyrochlore structure.

36 MATERIALS SCIENCE↗

Strategy for stabilization of the antiferroelectric phase (Pbma) over the metastable ferroelectric phase (P2{sub 1}ma) to establish double loop hysteresis in lead-free (1−x)NaNbO{sub 3}-xSrZrO{sub 3} solid solution

A new lead-free antiferroelectric solid solution system, (1−x)NaNbO{sub 3}-xSrZrO{sub 3}, was rationalized through noting the crystal chemistry trend, of decreasing the tolerance factor and an increase in the average electronegativity of the system. The SrZrO{sub 3} doping was found to effectively stabilize the antiferroelectric (P) phase in NaNbO{sub 3} without changing its crystal symmetry. Preliminary electron diffraction and polarization measurements were presented which verified the enhanced antiferroelectricity. In view of our recent report of another lead-free antiferroelectric system (1−x)NaNbO{sub 3}-xCaZrO{sub 3} [H. Shimizu et al. “Lead-free antiferroelectric: xCaZrO{sub 3} - (1−x)NaNbO{sub 3} system (0 ≤ x ≤ 0.10),” Dalton Trans. (published online)], the present results point to a general strategy of utilizing tolerance factor to develop a broad family of new lead-free antiferroelectrics with double polarization hysteresis loops. We also speculate on a broad family of possible solid solutions that could be identified and tested for this important type of dielectric.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thickness dependence of La 0.7 Sr 0.3 MnO 3 /PbZr 0.2 Ti 0.8 O 3 magnetoelectric interfaces

Magnetoelectric materials have great potential to revolutionize electronic devices due to the coupling of their electric and magnetic properties. Thickness varying La 0.7 Sr 0.3 MnO 3 (LSMO)/PbZr 0.2 Ti 0.8 O 3 (PZT) heterostructures were built and measured in this article by valence sensitive x-ray absorption spectroscopy. The sizing effects of the heterostructures on the LSMO/PZT magnetoelectric interfaces were investigated through the behavior of Mn valence, a property associated with the LSMO magnetization. Here, we found that Mn valence increases with both LSMO and PZT thickness. Piezoresponse force microscopy revealed a transition from monodomain to polydomain structure along the PZT thickness gradient. The ferroelectric surface charge may change with domain structure and its effects on Mn valence were simulated using a two-orbital double-exchange model. The screening of ferroelectric surface charge increases the electron charges in the interface region, and greatly changes the interfacial Mn valence, which likely plays a leading role in the interfacial magnetoelectric coupling. The LSMO thickness dependence was examined through the combination of two detection modes with drastically different attenuation depths. The different length scales of these techniques' sensitivity to the atomic valence were used to estimate the depth dependence Mn valence. Finally, a smaller interfacial Mn valence than the bulk was found by globally fitting the experimental results.

36 MATERIALS SCIENCE↗

Fast crystallization of amorphous Gd{sub 2}Zr{sub 2}O{sub 7} induced by thermally activated electron-beam irradiation

We investigate the ionization and displacement effects of an electron-beam (e-beam) on amorphous Gd{sub 2}Zr{sub 2}O{sub 7} synthesized by the co-precipitation and calcination methods. The as-received amorphous specimens were irradiated under electron beams at different energies (80 keV, 120 keV, and 2 MeV) and then characterized by X-ray diffraction and transmission electron microscopy. A metastable fluorite phase was observed in nanocrystalline Gd{sub 2}Zr{sub 2}O{sub 7} and is proposed to arise from the relatively lower surface and interface energy compared with the pyrochlore phase. Fast crystallization could be induced by 120 keV e-beam irradiation (beam current = 0.47 mA/cm{sup 2}). The crystallization occurred on the nanoscale upon ionization irradiation at 400 °C after a dose of less than 10{sup 17} electrons/cm{sup 2}. Under e-beam irradiation, the activation energy for the grain growth process was approximately 10 kJ/mol, but the activation energy was 135 kJ/mol by calcination in a furnace. The thermally activated ionization process was considered the fast crystallization mechanism.

36 MATERIALS SCIENCE↗

Structural and optical analysis on europium doped AZrO{sub 3} (A=Ba, Ca, Sr) phosphor for display devices application

Behavior displayed by europium doped AZrO{sub 3} phosphor which was synthesized by solid state reaction method. For synthesis of BaZrO{sub 3}, SrZrO{sub 3} and CaZrO{sub 3} phosphor with fixed concentration of europium ion was calcination at 1000°C and sintered at 1300°C following intermediate grinding. Synthesized sample was characterized by X-ray diffraction analysis and crystallite sized was calculated by Scherer’s formula. From PL spectra of prepared phosphors shows intense emission centred at 612nm (red emission) with high intensity for SrZrO{sub 3}:Eu{sup 3+}. For europium doped BaZrO{sub 3} and CaZrO{sub 3} (613nm) phosphor shows less intense PL spectra as compared to SrZrO{sub 3}:Eu{sup 3+}. The strong emission peak of AZrO{sub 3}:Eu{sup 3+} phosphor is due to forced electric dipole transition of {sup 5}D{sub 0} to {sup 7}F{sub 2} centered at 612 and 613nm. It is characteristic red emission for europium ion. The excitation spectra of AZrO{sub 3}:Eu{sup 3+} phosphor mainly consists of the charge transfer and (CTB) of Eu{sup 3+} located in 200–350 nm centred at 254nm. The present phosphors can act as single host for red light emission in display devices. The CIE coordinates were calculated by Spectrophotometric method using the spectral energy distribution of the AZrO{sub 3}:Eu{sup 3+} sample.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Transport properties of ceramic fuel cell CaZrO{sub 3}

Effects on temperature on thermal properties of proton conducting perovskite material CaZrO{sub 3} is studied using Modified Rigid Ion Model (MRIM). The computed bulk modulus, specific heat, thermal expansion coefficient and other thermal properties of CaZrO{sub 3} reproduce well with the available experimental data. In addition the cohesive energy (ϕ), molecular force constant (f), reststrahlen frequency (v), Debye temperature (θ{sub D}) and Gruneisen parameter (γ) are also reported and discussed. To our knowledge, some of the properties are being reported for the first report on this material.

36 MATERIALS SCIENCE↗

First principle study of band structure of SrMO{sub 3} perovskites

First principle study of band structure calculations in the local density approximations (LDA) as well as in the generalized gradient approximations (GGA) have been used to determine the electronic structure of SrMO{sub 3} where M stands for Ti, Zr and Mo. Occurrence of band gap proves SrTiO{sub 3} and SrZrO{sub 3} to be insulating. A small band gap is observed in SrMoO{sub 3} perovskite signifies it to be metallic. Band structures are found to compare well with the available data in the literature showing the relevance of this approach. ABINIT computer code has been used to carry out all the calculations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermoluminescence glow curve analysis and CGCD method for erbium doped CaZrO{sub 3} phosphor

The manuscript report the synthesis, thermoluminescence study at fixed concentration of Er{sup 3+} (1 mol%) doped CaZrO{sub 3} phosphor. The phosphors were prepared by modified solid state reaction method. The powder sample was characterized by thermoluminescence (TL) glow curve analysis. In TL glow curve the optimized concentration in 1mol% for UV irradiated sample. The kinetic parameters were calculated by computerized glow curve deconvolution (CGCD) techniaue. Trapping parameters gives the information of dosimetry loss in prepared phosphor and its usability in environmental monitoring and for personal monitoring. CGCD is the advance tool for analysis of complicated TL glow curves.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermodynamical properties of ceramic fuel cell Ba{sub 0.2}Ca{sub 0.8}ZrO{sub 3}

We have investigated the elastic and thermal properties of proton conducting Ba{sub 0.8}Ca{sub 0.2}ZrO{sub 3} at temperature 20 K ≤ T ≤ 700 K by using the Modified Rigid Ion Model (MRIM). We have computed the Second Order Elastic Constants (SOECs) C{sub 11}, C{sub 12}, C{sub 44} in the cubic phase. The cohesive energy (ϕ), molecular force constant (f), reststrahlen frequency (v), Debye temperature (θ{sub D}) and Gruneisen parameter (γ) are also discussed. In addition, the variation of specific heat and volume thermal expansion coefficient with temperature are reported below and above room temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Raman effect, structural and dielectric properties of sol-gel synthesized polycrystalline GaFe{sub 1-x}Zr{sub x}O{sub 3} (0≤x≤0.15)

Polycrystalline ceramic samples of Zirconium (Zr)-doped GaFeO{sub 3} (GaFe{sub 1-x}Zr{sub x}O{sub 3}) were studied using powder X-ray diffraction, complex impedance spectroscopy and Raman spectroscopic measurements to understand the effect of Zr doping on the structural and dielectric properties. The samples with varying Zr content were prepared by Sol-Gel method. X-ray data analysis confirmed the formation of single phase material without formation of any secondary phases and all are crystallized in Pc2{sub 1}n orthorhombic symmetry. Rietveld refinement of the X-ray data suggested an increase in the lattice constants due to size effect and decreases on x = 0.15 due to the effect of change in interplanner spacing. Impedance studies on the samples showed that the dielectric constant increases while loss tangent decrease as the Zr content increases. Raman scattering on GaFe{sub 1-x}Zr{sub x}O{sub 3} (x = 0, 0.05, 0.10, & 0.15) used to understand the composition dependence on phonon modes at room temperature. On Zr doping, Raman modes frequencies shifts to lower energies consistent with the X-ray data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optimization of BaZrO{sub 3} concentration as secondary phase in superconducting YBa{sub 2}Cu{sub 3}O{sub 7} for high current applications

We report the superconducting state properties of YBa{sub 2}Cu{sub 3}O{sub 7} (YBCO) on introduction of BaZrO{sub 3} (BZO) as a secondary phase. YBCO+xBZO (x= 0, 2, 4, 6, and 10 wt%) composite samples were prepared by solid state reaction method and characterized for structural, morphological and superconducting properties. X-ray diffraction confirms the increased crystallinity and images of scanning electron microscopy measurement show an increase in both grain size and grain connectivity on addition of BZO in YBCO. These effects are well pronounced in an applied magnetic field. Critical current density, J{sub C}, as well as the pinning force peaks at 4% of BZO concentration showed significant difference. A three-fold enhancement in J{sub C} and a six-fold enhancement in pinning force were observed at this optimum BZO concentration. This has been attributed to the pinning of flux lines in YBCO due to introduction of BZO as a secondary phase. These results show that this composite has potential application in high current applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Aspects of fatigue and rapid depolarization in thin film PZT capacitors

Discrepancies in switched polarization values obtained with pulse measurements and hysteresis measurements have been observed in ferroelectric PZT thin film capacitors. We attribute the differences as partially due to the effects of rapid depolarization. To measure rapid depolarization a pulse was applied to pole a ferroelectric capacitor; and then a second identical pulse of the same polarity was applied after a specified time. Significant switched charge was observed after the second pulse. this depolarization was observed to occur in the time frame from microseconds to seconds. Secondly, the effect of cycling voltage on fatigue was studied on several samples processed by different vendors. A strong dependence on voltage was obtained for one sample which can be characterized using a voltage activation approach. A second sample showed no appreciable effect of cycling voltage on fatigue. The difference in behavior demonstrates that the dependence of the fatigue mechanism on voltage can vary significantly depending on sample preparation.

36 MATERIALS SCIENCE↗

Angular distribution of atoms emitted from a SrZrO{sub 3} target by laser ablation under different laser fluences and oxygen pressures

Angular distributions of atoms emitted by laser ablation of perovskite-type oxide SrZrO{sub 3} have been investigated using electron probe microanalysis with wavelength-dispersive spectroscopy and charge-coupled device photography with an interference filter. Each constituent element has been analyzed as a two-modal distribution composed of a broad cos{sup m} {theta} distribution and a narrow cos{sup n} {theta} distribution. The exponent n characterizes the component of laser ablation while the exponent m characterizes that of thermal evaporation, where a larger n or m means a narrower angular distribution. In vacuum, O (n=6) showed a broader distribution than those of Sr (n=16) and Zr (n=17), and Sr{sup +} exhibited a spatial distribution similar to that of Sr. As the laser fluence was increased from 1.1 to 4.4 J/cm{sup 2}, the angular distribution of Sr became narrower. In the laser fluence range of 1.1-4.4 J/cm{sup 2}, broadening of the angular distribution of Sr was observed only at the fluence of 1.1 J/cm{sup 2} under the oxygen pressure of 10 Pa. Monte Carlo simulations were performed to estimate approximately the energy of emitted atoms, focusing on the broadening of the angular distribution under the oxygen pressure of 10 Pa. The energies of emitted atoms were estimated to be 1-20 eV for the laser fluence of 1.1 J/cm{sup 2}, and more than 100 eV for 2.2 and 4.4 J/cm{sup 2}.

36 MATERIALS SCIENCE↗