Search NASA⌕ Search

SEARCH · Search NASA

Results for “AIRFOILS - CASCADES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Comparison of the experimental aerodynamic characteristics of theoretically and experimentally designed supercritical airfoils

A lifting airfoil theoretically designed for shockless supercritical flow utilizing a complex hodograph method has been evaluated in the Langley 8-foot transonic pressure tunnel at design and off-design conditions. The experimental results are presented and compared with those of an experimentally designed supercritical airfoil which were obtained in the same tunnel.

Harris, C. D.↗

Aerodynamic Characteristics of a 14-Percent-Thick NASA Supercritical Airfoil Designed for a Normal-Force Coefficient of 0.7

This report documents the experimental aerodynamic characteristics of a 14 percent thick supercritical airfoil based on an off design sonic pressure plateau criterion. The design normal force coefficient was 0.7. The results are compared with those of the family related 10 percent thick supercritical airfoil 33. Comparisons are also made between experimental and theoretical characteristics and composite drag rise characteristics derived for a full scale Reynolds number of 40 million.

Harris, C. D.↗

Measuremants in the wake of an infinite swept airfoil

This is a report of the measurements in the trailing edge region as well as in the report of the developing wake behind a swept NACA 0012 airfoil at zero incidence and a sweep angle of 30 degrees. The measurements include both the mean and turbulent flow properties. The mean flow velocities, flow inclination and static pressure are measured using a calibrated three-hole yaw probe. The measurements of all the relevant Reynolds stress components in the wake are made using a tri-axial hot-wire probe and a digital data processing technique developed by the authors. The development of the three dimensional near-wake into a nearly two dimensional far-wake is discussed in the light of the experimental data. A complete set of wake data along with the data on the initial boundary layer in the trailing edge region of the airfoil are tabulated in an appendix to the report.

Novak, C. J.↗

Analysis of unswept and swept wing chordwise pressure data from an oscillating NACA 0012 airfoil experiment. Volume 1: Technical Report

The unsteady chordwise force response on the airfoil surface was investigated and its sensitivity to the various system parameters was examined. A further examination of unsteady aerodynamic data on a tunnel spanning wing (both swept and unswept), obtained in a wind tunnel, was performed. The main body of this data analysis was carried out by analyzing the propagation speed of pressure disturbances along the chord and by studying the behavior of the unsteady part of the chordwise pressure distribution at various points of the airfoil pitching cycle. It was found that Mach number effects dominate the approach to and the inception of both static and dynamic stall. The stall angle decreases as the Mach number increases. However, sweep dominates the load behavior within the stall regime. Large phase differences between unswept and swept responses, that do not exist at low lift coefficient, appear once the stall boundary is penetrated. It was also found that reduced frequency is not a reliable indicator of the unsteady aerodynamic response in the high angle of attack regime.

St.hilaire, A. O.↗

The structure of separated flow regions occurring near the leading edge of airfoils, including transition

Data was obtained for the NACA 663-018 airfoil in order to assess the advantages of tripping the boundary layer very near the leading edge for chord Reynolds numbers between 40,000 and 200,000. Single element trips were made from tape 2.5 mm wide and 0.15 mm thick. The unmodified tape trip in five thicknesses was placed across the span at 1.1% chord and the results of lift and drag measurements compared with the smooth airfoil case. Saw tooth geometry trips were also cut from tape and studied using five thicknesses. The saw tooth trips were placed across the span with the sharp points facing upstream at 1.1% chord and with the valley of the teeth at the 2.5% chord position. A large number of bumps and wiggles were produced in the lift coefficient versus angle of attack curves with various combinations of Reynolds number, thickness, and type of trips. The main result in the drag coefficient was an increase in C sub d min with increase in trip thickness.

Mueller, T. J.↗

Design and construction of 2 transonic airfoil models for tests in the NASA Langley C.3-M TCT

As part of a NASA/DFVLR cooperation program two transonic airfoils were tested in the NASA Langley 0.3-m TCT. Model design and construction was carried out by DFVLR. The models designed and constructed performed extremely well under cryogenic conditions. Essentially no permanent changes in surface quality and geometric dimensions occurred during the tests. The aerodynamic results from the TCT tests which demonstrate the large sensitivity of the airfoil CAST 10-Z/DOAZ to Reynolds number changes compared well with results from other facilities at ambient temperatures.

Schaechterle, G.↗

Laser holographic interferometry for an unsteady airfoil in dynamic stall

Laser holographic interferometry was used to study a two-dimensional NACA 0012 airfoil undergoing dynamic stall. The airfoil, fabricated from graphite fiber and epoxy, was tested at Mach numbers of 0.3 to 0.6, at Reynolds numbers of 500,000-2,000,000, at reduced frequencies of 0.015 to 0.15, and at mean angles of attack of 0-10 deg with amplitudes of 10 deg. Density and pressure fields were obtained from dual-plate interferograms. Double-pulse interferograms, which seemed to show the wake boundaries better, were also taken. Comparisons of pressures with orifice pressures were good for the attached flow cases. For the separated flow cases, which had a vortex enbedded in the flow, the comparisons were poor. Vortices, wake structures, and the dynamic stall process can be seen by holographic interferometry.

Lee, G.↗

An experimental investigation of the low Reynolds number performance of the Lissaman 7769 airfoil

A Lissaman 7769 airfoil, used on the Gossamer Condor and Gossamer Albatross human-powered aircraft, was tested in a low turbulence subsonic wind tunnel. Lift and drag data were collected at chord Reynolds numbers of 100,000, 150,000, 200,000, 250,000, and 300,000; at angles of attack from -10 to +20 deg by using an external strain gage force balance. Lift curves, drag curves, and drag polars were generated from both uncorrected data and data corrected for wind tunnel blockage effects. A flow visualization study was performed to correlate with the force data. The results of the investigation have shown that the airfoil exhibits a significant degradation in performance for chord Reynolds numbers below 150,000.

Conigliaro, P. E.↗

Computational fluid dynamics of airfoils and wings

It is pointed out that transonic flow is one of the fields where computational fluid dynamics turns out to be most effective. Codes for the design and analysis of supercritical airfoils and wings have become standard tools of the aircraft industry. The present investigation is concerned with mathematical models and theorems which account for some of the progress that has been made. The most successful aerodynamics codes are those for the analysis of flow at off-design conditions where weak shock waves appear. A major breakthrough was achieved by Murman and Cole (1971), who conceived of a retarded difference scheme which incorporates artificial viscosity to capture shocks in the supersonic zone. This concept has been used to develop codes for the analysis of transonic flow past a swept wing. Attention is given to the trailing edge and the boundary layer, entropy inequalities and wave drag, shockless airfoils, and the inverse swept wing code.

Garabedian, P.↗

Numerical simulation of airfoil ice accretion

A mathematical model of glaze and rime ice accretion on a two-dimensional airfoil is presented. The model employs standard methods for calculating the flow field and cloud droplet trajectories. This data is used as input to a thermodynamic analysis of the ice accretion process which includes liquid runback. The structure of the model allows for dynamic updating of the droplet collection efficiency and heat and mass transfer processes as the accreted ice shape changes. This results in the improved shape prediction over previously described methods. Simulations made with the model are compared to experimental results obtained for a NACA 0012 airfoil in the NASA/Lewis Icing Research Tunnel. The agreement with experiment is found to be generally satisfactory for some cases, but a need for improvements is indicated by others. Suggestions for improvements are made.

Macarthur, C. D.↗

Design and true Reynolds number 2-D testing of an advanced technology airfoil

A NASA-industry program has been conducted to determine the accuracy of available 2-D airfoil analysis procedures over a wide range of Reynolds numbers. The program also served to develop and demonstrate effective wind tunnel model designs for use in a cryogenic environment. A Lockheed design, CRYO 12X, supercritical, shockfree airfoil was configured using a continuous curvature analytical definition of the ordinates. Test results show a very close ordinate tolerance was necessary to realize the intended pressure distribution. Correlation of test with Korn-Garabedian 2-D analysis pressure data were generally good. GRUMFOIL analysis with a sidewall correction gave a better correlation.

Reaser, J. S.↗

A spectral method for the solution of transonic potential flow about an arbitrary two-dimensional airfoil

The application of a spectral method to the computation of transonic potential flow about an arbitrary lifting airfoil is discussed. An iterative solution algorithm is described, which was found to be robust, fairly efficient, and fit well in a multigrid coontext. Details of the application to the transonic potential flow problem are given. Results from the spectral technique for both subcritical flow and supercritical flow with shocks are given and compared with results from state-of-the-art finite-difference airfoil codes.

Streett, C. L.↗

Comparison of supercritical airfoil flow calculations with wind-tunnel results

Navier-Stokes calculations have been performed for a supercritical airfoil at a transonic design condition and at a subsonic condition. Wind-tunnel pressure-rail measurements were employed as boundary data in the calculations to account for wall-interference effects. A fine mesh was used so that most details of the flows were resolved, particular attention having been given to the trailing-edge region. Detailed comparisons are made with the experimental data. Good agreement was obtained on the airfoil except at the trailing edge where separation occurred. Flow details in the trailing-edge region are examined and differences are shown to be attributable to the turbulence model employed.

King, L. S.↗

The influence of free-stream disturbances on low Reynolds number airfoil experiments

The results of an investigation of the influence of free stream disturbances on the lift and drag performance of the Lissaman 7769 airfoil are presented. The wind tunnel disturbance environment is described using hot-wire anemometer and sound pressure level measurements. The disturbance level is increased by the addition of a 'turbulence screen' upstream of the test section and/or the addition of a flow restrictor downstream of the test section. For the Lissaman airfoil it was found that the problems associated with obtaining accurate wind tunnel data at low chord Reynolds numbers (i.e., below 200,000) are compounded by the extreme sensitivity of the boundary layers to the free stream disturbance environment. The effect of free stream disturbances varies with magnitude, frequency content, and source of the disturbance.

Mueller, T. J.↗

Prediction of boundary-layer characteristics of an oscillating airfoil

The evolution of unsteady boundary layers on oscillating airfoils is investigated by solving the governing equations by the Characteristic Box scheme. The difficulties associated with computing the first profile on a given time line, and the velocity profiles with partial flow reversal are solved. A sample calculation is performed for an external velocity distribution typical of those found near the leading edge of thin airfoils. The viability of the calculation procedure is demonstrated. Previously announced in STAR as N81-28391

Cebeci, T.↗

Family of airfoil shapes for rotating blades

An airfoil which has particular application to the blade or blades of rotor aircraft such as helicopters and aircraft propellers is described. The airfoil thickness distribution and camber are shaped to maintain a near zero pitching moment coefficient over a wide range of lift coefficients and provide a zero pitching moment coefficient at section Mach numbers near 0.80 and to increase the drag divergence Mach number resulting in superior aircraft performance.

Noonan, K. W.↗

Reynolds number tests of an NPL 9510 airfoil in the Langley 0.3-meter transonic cryogenic tunnel

An investigation of the NPL 9510 airfoil was conducted in the Langley 0.3-Meter Transonic Cryogenic Tunnel over the following ranges of test conditions: Mach number of 0.35 to 0.82, total temperature of 94 K to 300 K, total pressure of 1.20 to 5.81 atm, Reynolds number based on airfoil chord of 1.34 x 10 to the 6th power to 48.23 x 10 to the 6th power, and angle of attack of 0 deg to 6 deg. The drag creep previously reported by the British National Physics Laboratory at low Reynolds numbers was also found to be present at high Reynolds numbers; the section drag coefficient continued to decrease even at the highest Reynolds number tested. Tests made close to free-stream saturation did not produce altered aerodynamic coefficients due to condensation effects.

Jenkins, R. V.↗