Search NASA⌕ Search

SEARCH · Search NASA

Results for “BASES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Impact of a Novel Nickel-Based Catalyst and Phenyl-Acrylate-Based Anion-Exchange Membrane in a Direct Urea Fuel Cell

Developing target-specific catalysts and anion-exchange membranes (AEMs) is crucial for direct urea fuel cell (DUFC) performance. To advance the DUFC system, we developed an anode catalyst with a nickel–iron oxyhydroxide/carbon (NiFeOOH/C) nanofibrous structure for the urea oxidation reaction (UOR), where we optimized the Ni/Fe molar ratio as 6:4. The enhanced electrocatalytic activity of the anode (Ni 6 Fe 4 OOH/C) is attributed to the hydroxide group, which responds with urea molecules to enhance the UOR in a pH-neutral system. Here, we employed a recently developed cross-linked phenyl-acrylate-based AEM (PA/M). A DUFC prepared with the anode and PA/M generates a maximum power density of 11.1 mW/cm 2 and 0.92 V open-circuit voltage under 3 M urea as fuel at 25 °C. We further analyzed the applicability of PA/M in a DUFC system by measuring the urea partition coefficients and permeabilities over a range of concentrations.

10 SYNTHETIC FUELS↗

110th Anniversary : Properties of Imidazolium-Based Ionic Liquids Bearing Both Benzylic and n -Alkyl Substituents

Reports of imidazoliumionic liquids (ILs) with at least one benzylic substituent bound to the imidazolium cation are far less common than the ubiquitous 1-alkyl-3-methylimidazolium ILs ([C n mim][X]). Furthermore, there is significant motivation to determine structure–property relationships for imidazolium-based ILs with at least one benzylic substituent. Not only are these ILs just as straightforward to synthesize as [C n mim][X] ILs, but ILs with benzylic substituents are also representative segments of poly(ILs) and ionenes where imidazolium cations with benzylic groups are commonly found. This report focuses on the effects of benzyl and methylbenzyl substituents on the density and viscosity of a series of imidazolium cations paired with bis[(trifluoromethyl)sulfonyl]imide (more commonly known as bistriflimide) ([Tf 2 N] – ) anions. Furthermore, the solubility of CO 2 in 1-benzyl-3-methylimidazolium bistriflimide [Bnmim][Tf 2 N] (CAS: 433337-24-7) was measured at 303.15, 318.15, 333.15, and 348.15 K at pressures in the range of 1–9 bar.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rapid Identification of X-ray Diffraction Patterns Based on Very Limited Data by Interpretable Convolutional Neural Networks

Large volumes of data from material characterizations call for rapid and automatic data analysis to accelerate materials discovery. Herein, we report a convolutional neural network (CNN) that was trained based on theoretical data and very limited experimental data for fast identification of experimental X-ray diffraction (XRD) patterns of metal–organic frameworks (MOFs). To augment the data for training the model, noise was extracted from experimental data and shuffled; then it was merged with the main peaks that were extracted from theoretical spectra to synthesize new spectra. For the first time, one-to-one material identification was achieved. Theoretical MOFs patterns (1012) were augmented to a whole data set of 72 864 samples. It was then randomly shuffled and split into training (58 292 samples) and validation (14 572 samples) data sets at a ratio of 4:1. For the task of discriminating, the optimized model showed the highest identification accuracy of 96.7% for the top 5 ranking on a test data set of 30 hold-out samples. Neighborhood component analysis (NCA) on the experimental XRD samples shows that the samples from the same material are clustered in groups in the NCA map. Analysis on the class activation maps of the last CNN layer further discloses the mechanism by which the CNN model successfully identifies individual MOFs from the XRD patterns. Furthermore, this CNN model trained by the data augmentation technique would not only open numerous potential applications for identifying XRD patterns for different materials, but also pave avenues to autonomously analyze data by other characterization tools such as FTIR, Raman, and NMR spectroscopies.

36 MATERIALS SCIENCE↗

Natural Charge-Transfer Analysis: Eliminating Spurious Charge-Transfer States in Time-Dependent Density Functional Theory via Diabatization, with Application to Projection-Based Embedding

For many types of vertical excitation energies, linear-response time-dependent density functional theory (LR-TDDFT) offers a useful degree of accuracy combined with unrivaled computational efficiency, although charge-transfer excitation energies are often systematically and dramatically underestimated, especially for large systems and those that contain explicit solvent. As a result, low energy electronic spectra of solution-phase chromophores often contain tens to hundreds of spurious charge-transfer states, making LR-TDDFT needlessly expensive in bulk solution. More nefariously, intensity borrowing by the low-energy charge-transfer states can affect intensities of the valence excitations even if those excitation energies are accurate. At higher excitation energies, it is difficult to distinguish spurious CT states from genuine charge-transfer-to-solvent (CTTS) excitations. In this work, we introduce an automated diabatization scheme that enables fast and effective screening of the CTTS acceptor space in bulk solution. Our procedure introduces the concept of “natural charge-transfer orbitals”, which provide a means to isolate characteristic pairs of orbitals that are most likely to participate in a CTTS excitation. The projection of these orbitals onto solvent-centered virtual orbitals provides a criterion for defining the most important solvent molecules in a given excitation. We apply this method to analyze an ab initio molecular dynamics (MD) trajectory of I-(aq) and report the lowest-energy CTTS band in the absorption spectrum. Our results are in excellent agreement with experimental measurements for bulk I-(aq), and only one-third of the water molecules in the I-(H2O)96 simulation cell need to be described with LR-TDDFT in order to obtain excitation energies that are converged to < 0.1 eV. The tools introduced herein will improve the accuracy, efficiency, and usability of LR-TDDFT in solution-phase environments

Carter-Fenk, Kevin D.↗

Neural Network Water Model Based on the MB-Pol Many-Body Potential

The MB-pol many-body potential accurately predicts many properties of water, including cluster, liquid phase, and vapor–liquid equilibrium properties, but its high computational cost can make applying it in large-scale simulations quite challenging. Here, in order to address this limitation, we developed a “deep potential” neural network (DPMD) model based on the MB-pol potential for water. We find that a DPMD model trained on mostly liquid configurations yields a good description of the bulk liquid phase but severely underpredicts vapor–liquid coexistence densities. By contrast, adding cluster configurations to the neural network training set leads to a good agreement for the vapor coexistence densities. Liquid phase densities under supercooled conditions are also represented well, even though they were not included in the training set. These results confirm that neural network models can combine accuracy and transferability if sufficient attention is given to the construction of a representative training set for the target system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Efficient Unassisted Overall Photocatalytic Seawater Splitting on GaN-Based Nanowire Arrays

Large-scale, clean, efficient and sustainable hydrogen production from water is one of the major goal in solar-to-fuel conversion as the sun and water represent the two most abundant and geographically-balanced free resources available on Earth. Considering that most of the liquid water available on Earth’s surface is present in the form of seawater, H 2 generation from seawater splitting is highly desirable for large-scale practical and economical application. Herein, we report on the first demonstration of direct efficient overall solar-driven seawater splitting on p-GaN-based nanowire-arrays without any external bias or sacrificial agents from various types of simulated seawater solutions. As a result, a stable solar-to-hydrogen (STH) conversion efficiency of 1.9% was obtained under concentrated irradiation, demonstrating its possible utilization for large-scale, environmental-friendly and sustainable generation of clean solar fuel.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantifying the Ligand-Induced Triplet Energy Transfer Barrier in a Quantum Dot-Based Upconversion System

During photon upconversion, quantum dots (QDs) transfer energy to molecules in solution through a long ligand shell. This insulating ligand shell imparts colloidal stability at the expense of efficient photosensitization. For the first time, we quantify the barrier these aliphatic ligands pose for triplet energy transfer in solution. Using transient absorption spectroscopy, we experimentally measure a small damping coefficient of 0.027 Å −1 for a ligand exceeding 10 carbons in length. The dynamic nature of ligands in solution lowers the barrier to charge or energy transfer compared to organic thin films. In addition, we show that surface ligands shorter than 8 carbons in length allow direct energy transfer from the QD, bypassing the need for a transmitter ligand to mediate energy transfer, leading to a 6.9% upconversion quantum yield compared with 0.01% for ligands with 18 carbons. Furthermore, this experimentally derived insight will enable the design of efficient QD-based photosensitizers for catalysis and energy conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase Stability and Electronic Structure of Prospective Sb-Based Mixed Sulfide and Iodide 3D Perovskite (CH 3 NH 3 )SbSI 2

Lead-free antimony-based mixed sulfide and iodide perovskite phases have recently been reported to be synthesized experimentally and to exhibit reasonable photovoltaic performance. In this work, through a combination of experimental validation and computational analysis, we show no evidence of the formation of the mixed sulfide and iodide perovskite phase, MASbSI 2 (MA = CH 3 NH 3 + ), and instead that the main products are a mixture of the binary and ternary compounds (Sb 2 S 3 and MA 3 Sb 2 I 9 ). Density functional theory calculations also indicate that such a mixed sulfide and iodide perovskite phase should be thermodynamically less stable compared with binary/ternary anion-segregated secondary phases and less likely to be synthesized under equilibrium conditions. Additionally, band structure calculations show that this mixed sulfide and iodide phase, if possible to synthesize (e.g., under nonequilibrium conditions), should have a suitable direct band gap for photovoltaic application.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase Behavior of Grafted Polymer Nanocomposites from Field-Based Simulations

There are limited theoretically predicted phase diagrams for polymer nanocomposites (PNCs) because conventional modeling techniques are largely unable to predict the macroscale phase behavior of PNCs. Here, we show that recent field-based methods, including PNC field theory (PNC-FT) and theoretically informed Langevin dynamics, can be used to calculate phase diagrams for polymer-grafted nanoparticles (gNPs) incorporated into a polymer matrix. We calculate binodals for the transition from the miscible, dispersed phase to the macrophase separated state as functions of important experimental parameters, including the ratio of the matrix chain degree of polymerization ( P ) to the grafted chain degree of polymerization ( N ), the enthalpic repulsion between the matrix and grafted chains, the grafting density (σ), the size of the NPs, and the NP volume fraction. We demonstrate that thermal and polymer conformational fluctuations enhance the degree of phase separation in gNP-PNCs, a result of depletion interaction effects. We support this conclusion by experimentally investigating the phase separation of poly(methyl methacrylate)-grafted silica NPs in a polystyrene matrix as a function of P/N . The simulations only agree with experiments when fluctuations are included because fluctuations are needed to properly capture the depletion interactions between the gNPs. Here, we clarify the role of conformational entropy in driving depletion interactions in PNCs and suggest that inconsistencies in the literature may be due to polymer chain length effects since conformational entropy increases with increasing chain length.

36 MATERIALS SCIENCE↗

Potential Foldamers Based on an ortho- Terphenyl Amino Acid

We describe the synthesis and characterization of a new class of oligomers built from a terphenyl-based amino acid. Here, these oligomeric amides are of interest because the adoption of specific conformations could potentially be driven by the coordinated formation of inter-residue hydrogen bonds and aromatic interactions. Although high-resolution structural data have proven inaccessible, circular dichroism and nuclear magnetic resonance studies suggest that the new oligomers fold concomitantly with discrete self-association in chloroform. Molecular simulations find no sign of folding as a monomer, and in fact suggest that hydrogen bond patterning is anti-cooperative, inhibiting longer helices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding Mass Transport in Copper Electrolyte-Based Dye-Sensitized Solar Cells

Copper redox shuttles, particularly [Cu(tmby) 2 ] 2+/1+ (tmby = bis(4,4',6,6'-tetramethyl-2,2'-bipyridine)), proved to be among the best electrolytes for dye-sensitized solar cells (DSCs), realizing higher power conversion efficiencies both under full sun and indoor illumination than conventional iodide/triiodide and cobalt electrolytes. Even though [Cu(tmby) 2 ] 2+/1+ renders a relatively higher performance, this metal complex is bulky and is limited by mass transport. Since the regeneration of the dye ground state by Cu I and the reaction of Cu II at the counter electrode are comparatively faster processes, the efficiency of DSC involving Cu I /Cu II electrolytes under relatively high light intensities is largely governed by the diffusion of Cu I /Cu II species. Understanding mass transport in these solar cells will enable further improvements in the performance of such copper-based DSCs. Here in the present study, the role of illumination intensity on the photogenerated current and its relationship to mass transport is evaluated using the best cosensitized dye (D35:XY1) and copper electrolyte ([Cu(tmby) 2 ] 2+/1+ ) combination.

14 SOLAR ENERGY↗

Advantages of MgAlOx over gamma-Al2O3 as a support material for potassium-based high temperature lean NOx traps

MgAlOx mixed oxides were employed as supports for potassium-based lean NOx traps (LNTs) targeted for high temperature applications. Effects of support compositions, K/Pt loadings, thermal aging and catalyst regeneration on NOx storage capacity were systematically investigated. The catalysts were characterized by XRD, NOx-TPD, TEM, STEM-HAADF and in-situ XAFS. The results indicate that MgAlOx mixed oxides have significant advantages over conventional gamma-Al2O3-supports for LNT catalysts, in terms of high temperature NOx trapping capacity and thermal stability. First, as a basic support, MgAlOx stabilizes stored nitrates (in the form of KNO3) to much higher temperatures than mildly acidic gamma-Al2O3. Second, MgAlOx minimizes Pt sintering during thermal aging, which is not possible for gamma-Al2O3 supports. Notably, combined XRD, in-situ XAFS and STEM-HAADF results indicate that Pt species in the thermally aged Pt/MgAlOx samples are finely dispersed in the oxide matrix as isolated atoms. This strong metal-support interaction stabilizes Pt and minimizes the extent of sintering. However, such strong interactions result in Pt oxidation via coordination with the support so that NO oxidation activity can be adversely affected after aging which, in turn, decreases NOx trapping ability for these catalysts. Interestingly, a high-temperature reduction treatment regenerates essentially full NOx trapping performance. In fact, regenerated Pt/K/MgAlOx catalyst exhibits much better NOx trapping performance than fresh Pt/K/Al2O3 LNTs over the entire temperature range investigated here. In addition to thermal aging, Pt/K loading effects were systemically studied over the fresh samples. The results indicate that NOx trapping is kinetically limited at low temperatures, while thermodynamically limited at high temperatures. A simple conceptual model was developed to explain the Pt and K loading effects on NOx storage. An optimized K loading, which allows balancing between the stability of nitrates and exposed Pt surface, gives the best NOx trapping capability.

Environmental Molecular Sciences Laboratory↗

Model-Based Energy and Cost Analysis of Direct Air Capture Using ePTFE-Based Laminate-Structured Gas–Solid Contactors

Carbon dioxide removal (CDR) technologies will play a significant role in limiting global warming if implemented on a large scale. Direct air capture (DAC) is a scalable approach for removing atmospheric carbon, yet the true scope of its scalability remains unclear due to the early stage of technology development and high first plant costs. This study provides groundwork for understanding the technoeconomic trade-offs in developing DAC systems using laminate-structured gas–solid contactors, encompassing the analysis of both contactor and process design spaces. The robust mass transfer and process models outlined in this study provide tools for evaluating DAC processes and designing DAC plants based on cost and energy analysis. First, the key contactor geometrical parameters are identified to understand the CO 2 productivity–energy demand trade-offs, where geometries yielding higher mass transfer rates can achieve higher CO 2 productivities at the expense of energy consumption by fans and steam use. Next, a detailed process parametric study is conducted for DAC systems coupled with steam-assisted temperature-vacuum swing adsorption (S-TVSA) to visualize the trade-offs in the multidimensional design space. The main cost driver dramatically changes over different process conditions, but the operating cost prevailed on the Pareto front, with potential to operate as low as 150 $/tonne-CO 2 (within the cost range of 148–504 $/tonne-CO 2 in this study where the DAC system is coupled with industrial facilities for steam production).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The elastase-PK101 structure: Mechanism of an ultrasensitive activity-based probe revealed

Human neutrophil elastase (HNE) plays a central role in neutrophil host defense, but its broad specificity makes HNE a difficult target for both inhibitor and probe development. Recently, we identified the unnatural amino acid containing activity-based probe PK101, which exhibits astounding sensitivity and selectivity for HNE, yet completely lacks mechanistic explanation for its unique characteristics. Here, we present the crystal structure of the HNE-PK101 complex which not only reveals the basis for PK101 ultrasensitivity but also uncovers so far unrecognized HNE features. Strikingly, the Nle( O -Bzl) function in the P4 position of PK101 reveals and leverages an “exo-pocket” on HNE as a critical factor for selectivity. Furthermore, the PK101 P3 position harbors a methionine dioxide function, which mimics a post-translationally oxidized methionine residue and forms a critical hydrogen bond to the backbone amide of Gly219 of HNE. Gly219 resides in a Gly–Gly motif that is unique to HNE, yet compulsory for this interaction. Consequently, this feature enables HNE to accommodate substrates that have undergone methionine oxidation, which constitutes a hallmark post-translational modification of neutrophil signaling.

36 MATERIALS SCIENCE↗

X-ray Transparent Microfluidic Chip for Mesophase-Based Crystallization of Membrane Proteins and On-Chip Structure Determination

Crystallization from lipidic mesophase matrices is a promising route to diffraction-quality crystals and structures of membrane proteins. The microfluidic approach reported here eliminates two bottlenecks of the standard mesophase-based crystallization protocols: (i) manual preparation of viscous mesophases and (ii) manual harvesting of often small and fragile protein crystals. In the approach reported here, protein-loaded mesophases are formulated in an X-ray transparent microfluidic chip using only 60 nL of the protein solution per crystallization trial. The X-ray transparency of the chip enables diffraction data collection from multiple crystals residing in microfluidic wells, eliminating the normally required manual harvesting and mounting of individual crystals. We validated our approach by on-chip crystallization of photosynthetic reaction center, a membrane protein from Rhodobacter sphaeroides, followed by solving its structure to a resolution of 2.5 Å using X-ray diffraction data collected on-chip under ambient conditions. A moderate conformational change in hydrophilic chains of the protein was observed when comparing the on-chip, room temperature structure with known structures for which data were acquired under cryogenic conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development and validation of a reduced mechanism for urea-based SNCR process based on QSS graph

This paper reports a reduced mechanism used in urea-based SNCR process for NOx control that is developed from the detailed mechanism originally proposed by Rota et al. (Chem. Eng. Sci. 2002, 57, 27-38) consisting of 173 elemental reactions and 31 chemical species. Sensitivity analysis and rate-of-production analysis are first conducted to exclude redundant elemental reactions and species, forming a skeletal mechanism. After that, quasi-steady-state species are identified and a 12-step 16-species reduced mechanism is established. The balance equations for quasi-steady-state species are innovatively solved by means of QSS graph method presented by Lu and Law (J. Phys. Chem. A2006, 110, 13202-13208) with the avoidance of efficiency compromise stemming from algebraic iterations. The predictions of the reduced mechanism show satisfactory agreement with those of the detailed one over a wide range of operating conditions, including various temperatures, molar ratio of CO(NH{sub 2}){sub 2}/NO and O{sub 2} and CO concentrations. The performances of QSS graph method and traditional QSSA by iteration are compared in plug-flow computations. The deviation in accuracy is only in order of 0.01%, while QSS graph creates nearly 40% speed-up significantly superior to QSSA by iteration. 30 refs., 9 figs., 3 tabs.

01 COAL, LIGNITE, AND PEAT↗