Search NASA⌕ Search

SEARCH · Search NASA

Results for “Band structure methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Ab initio study of the structural, electronic and optical properties of ZnTe compound

Structural, electronic and optical properties of ZnTe compound were calculated using Density Functional Theory (DFT) based on the pseudopotentials and planewaves (PP-PW) method as implemented in the ABINIT computer code, where the exchange–correlation functional is approximated using the local density approximation (LDA) and the generalized gradient approximation (GGA). The obtained results from either LDA or GGa calculation for lattice parameter, energy band gap and optical parameters, such as the fundamental absorption edge, the peaks observed in the imaginary part of the dielectric function, the macroscopic dielectric constants and the optical dielectric constant, are compared with the available theoretical results and experimental data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Study on gas sensing mechanism in p-CuO/n-ZnO heterojunction sensor

Highlights: • Gas adsorption sites can be enhanced by forming ZnO:CuO heterojunction. • Ethanol can access all the surface of sensing materials due to chunk-shaped morphology. • Energy band diagram model is proposed to explain the gas sensing mechanism. - Abstract: This work describes the need of more reactive sites for gas sensing. The formation of heterojunctions may increase the number of reactive sites. With this aim, ZnO:CuO nanoparticles with heterojunction was synthesized by co-precipitation method. XRD measurements on ZnO and ZnO:CuO (90:10) nanoparticles revealed the hexagonal wurtzite structure of ZnO with the signature of CuO phases in ZnO:CuO nanoparticles. The morphological analysis by SEM and TEM showed that the nanoparticles are arranged in such a way to form distorted rod-like structures, which are stacked side by side to give a chunk-shaped morphology. High resolution TEM and Fourier transform infrared analyses revealed the presence of defects in the sample. ZnO:CuO nanoparticles showed high sensitivity toward ethanol, which is associated with the introduction of large number of reactive sites and the formation of heterojunctions with the addition of CuO. The sensing mechanism behind the sensing materials is also proposed using energy band diagrams.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical, Structural and Photo Electrochemical Properties of Cd1-xZnxS Films Grown by Chemical Bath Deposition

Cd1-xZnxS (0 = x = 0.5) films were fabricated by chemical bath deposition method and characterized by grazing incidence X-ray diffraction (GIXRD), scanning electron microscopy (SEM), UV-visible spectroscopy and photoelectrochemical (PEC) cell. The flat band potential value was found to be tunable from -441 to -664 mV with increasing Zn2+ concentration in the reaction solution. GIXRD results indicate that the fabricated Cd1-xZnxS are hexagonally oriented and Zn2+ is successfully introduced into CdS. SEM results indicate that high Zn2+ doping concentration can form flake-like Cd1-xZnxS morphology. Furthermore, Zn2+ incorporation to the CdS was found to enhance the optical absorbing capability of CdS in visible region. The optical band gap was found to vary as the composition parameter changed from x = 0.0 to x = 0.5 in the reaction solution. The PEC cell results indicate that the Cd1-xZnxS thin films with x > 0.3 in the bath show the pinning of the Fermi level and cause VOC to decrease.

Chemical Bath Disposition, CBD, doping, thin film↗

A photoactive titanate with a stereochemically active Sn lone pair: Electronic and crystal structure of Sn{sub 2}TiO{sub 4} from computational chemistry

TiO{sub 2} remains the most widely studied metal oxide for photocatalytic reactions. The standard approach to reduce the band gap of titania, for increasing the absorption of visible light, is anion modification. For example the formation of an oxynitride compound, where the nitrogen 2p states decrease the binding energy of the valence band. We demonstrate that cation modification can produce a similar effect through the formation of a ternary oxide combining Ti and an ns{sup 2} cation, Sn(II). In Sn{sub 2}TiO{sub 4}, the underlying Ti 3d conduction states remain largely unmodified and an electronic band gap of 2.1 eV (590 nm) is predicted by hybrid density functional theory. Our analysis indicates a strong potential for Sn{sub 2}TiO{sub 4} in visible-light driven photocatalysis, which should prove superior to the alternative (SnO{sub 2}){sub 1-x}(TiO{sub 2}){sub x} solid-solution. - Graphical abstract: Sn{sub 2}TiO{sub 4} is predicted to be a semiconductor with potential for bipolar conductivity and visible-light photocatalysis. Highlights: Black-Right-Pointing-Pointer Tin titanate adopts the Pb{sub 3}O{sub 4} crystal structure with a sterically active Sn(II) lone pair. Black-Right-Pointing-Pointer Tin titanate is thermodynamically stable with respect to TiO{sub 2} and SnO. Black-Right-Pointing-Pointer Tin titanate is predicted have a band gap of 590 nm, ideal for photocatalytic applications.

36 MATERIALS SCIENCE↗

Room-temperature ferromagnetism and optical properties in Mg-doped TiO{sub 2}: A density functional theory investigation

The magnetic and optical properties of Mg-doped anatase TiO{sub 2} have been theoretically investigated using the LDA+U method. The total induced moments are about 2 μ{sub B}, which mainly localize on the nearest apical oxygen atoms. Moreover, the hole-induced interactions indicate that the magnetic moments prefer to the ferromagnetic coupling with the antiferromagnetic state lying 1160 meV higher in energy. This implies that the ferromagnetic state can be stable against thermal fluctuations up to room temperature. Additionally, the Mg doping is able to enhance the absorption efficiency of solar spectrum, especially in the near-infrared light region, which origins from the isolated O 2p states above the valence-band maximum rather than the effect of band-gap narrowing.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Experimental (X-ray, FT-IR, and UV-Vis Spectroscopy) and Theoretical Methods (DFT Study) of N'-(Dipyridin-2-ylmethylene)-4-methylbenzenesulfonohydrazide

A new hydrazone derivative was synthesized and characterized by IR, UV-Vis spectroscopy, elemental analysis and single-crystal X-ray diffraction. The compound was established to reveal antibacterial activity. The compound (C{sub 18}H{sub 16}N{sub 4}O{sub 2}S) crystallizes in monoclinic crystal system with C2/c space group. The molecular structure is stabilized by a C–H···O intermolecular hydrogen bond. Quantum chemical calculations based on DFT/B3LYP/6-31G(d, p) were carried out and the results were compared with the experimental data. The calculated vibrational frequencies were used to determine the types of molecular motions associated with each of the observed experimental bands. UV-Vis absorption spectra of the compound calculated by TD-DFT have been ascribed to their corresponding molecular structure and electron transitions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure−Property Relationships in a Series of Hybrid Halopyridinium Ruthenium(IV) Halides

Reported is the synthesis and characterization of a family of hybrid ruthenium halides consisting of haloruthenium octahedra (X = Cl, Br) charge balanced with halopyridinium (XPy; X= H, Cl, Br, I) organic cations which assemble via noncovalent interactions between ion pairs. Diffuse reflectance spectroscopy showed that compounds containing RuBr 6 2- octahedra displayed a lower bandgap (1.05 eV< x < 1.08 eV) compared to compounds with RuCl 6 2- octahedra (1.22 eV < x < 1.43 eV). Additionally, computational density functional theory (DFT) based natural bonding orbital (NBO) analysis and density of state (DOS) methods were used to characterize second-sphere non-covalent interaction strengths and elucidate molecular orbital perturbations to elucidate their influence on Ru-X orbital constructs and in turn rationalize band gap trends. Analyses showed ligand to metal charge transfer is responsible for the small bandgap energies and are unperturbed by second-sphere interactions. Here, this report serves as a platform for probing the relationship between the structural and photophysical properties within the haloruthenium family of low dimensional transition metal halide perovskites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fundamental Principles for Calculating Charged Defect Ionization Energies in Ultrathin Two-Dimensional Materials

Defects in two-dimensional (2D) materials are becoming prominent candidates for quantum emitters and scalable optoelectronic applications. However, several physical properties that characterize their behavior, such as charged defect ionization energies, are difficult to simulate with conventional first-principles methods, mainly because of the weak and anisotropic dielectric screening caused by the reduced dimensionality. We establish fundamental principles for accurate and efficient calculations of charged defect ionization energies and electronic structure in ultrathin 2D materials. We propose to use the vacuum level as the reference for defect charge transition levels (CTLs) because it gives robust results insensitive to the level of theory, unlike commonly used band-edge positions. Furthermore, we determine the fraction of Fock exchange in hybrid functionals for accurate band gaps and band-edge positions of 2D materials by enforcing the generalized Koopmans’ condition of localized defect states. We found that the obtained fractions of Fock exchange vary significantly from 0.2 for bulk hexagonal boron nitride (h-BN) to 0.4 for monolayer h-BN, whose band gaps are also in good agreement with experimental results and calculated GW results. The combination of these methods allows for the reliable and efficient prediction of defect ionization energies (the difference between CTLs and band-edge positions). We motivate and generalize these findings with several examples including different defects in monolayer to few-layer h-BN, monolayer MoS 2 , and graphane. Lastly, we show that increasing the number of layers of h-BN systematically lowers defectionization energies, mainly through CTLs shifting towards vacuum, with conduction band minima kept almost unchanged.

36 MATERIALS SCIENCE↗

Special Features of the Optical Absorption and Photoconductivity of Indium Monoselenide Upon Laser Excitation

The successive ionic layer adsorption and reaction (SILAR) method is used to prepare InSe thin films and InSe nanoparticles. Shapes and sizes of the obtained nanoparticles are investigated using a scanning electron microscope and an atomic force microscope. The main parameters of the examined structures, nanoparticle sizes (4–20 nm), and band gap (Е{sub g} = 1.60 eV) for nanoparticles with the least sizes are determined. Superfast (1.5·10{sup -8} s) photocurrent relaxation and stimulated emission with line half-width of 8 Å have been observed upon exposure to laser radiation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Anharmonic Bloch oscillations of electrons in electrically biased superlattices

The phenomenon of anharmonic Bloch oscillations (i.e., oscillations with a frequency which is a multiple of the Bloch frequency) is considered. The energy-band structure of silicon-carbide polytypes where these oscillations are observed is calculated ab initio. A one-dimensional model potential making it possible to calculate the Stark wave functions in a biased superlattice is constructed for these polytypes. The transfer matrix method is used to find the set of energy levels (the so-called Stark ladder) and calculate the electron wave functions. It is shown that both radiative transitions between neighboring Stark levels (at the Bloch frequency) and transitions in the form of jumps via several levels, accompanied by emission at frequencies that are multiples of the Bloch frequency, may occur. The calculated probabilities of transitions between Stark-ladder levels increase with increasing applied field strength.

36 MATERIALS SCIENCE↗

Simulation of Electron and Hole States in Si Nanocrystals in a SiO{sub 2} Matrix: Choice of Parameters of the Empirical Tight-Binding Method

The problem of the optimal choice of parameters of the empirical tight-binding method to simulate the quantum-confined levels of Si nanocrystals embedded into an amorphous SiO{sub 2} matrix is studied. To account for tunneling from nanocrystals to SiO{sub 2}, the amorphous matrix is considered as a virtual crystal with a band structure similar to that of SiO{sub 2} β-cristobalite and with a lattice constant matched to the lattice constant of bulk Si. The electron density distributions in k space for electrons and holes quantum-confined in a Si nanocrystal in SiO{sub 2} are calculated in a wide energy region, which provides a means to see clearly the possibility of the existence of efficient direct optical transitions for hot electrons at the upper quantum-confined levels.

36 MATERIALS SCIENCE↗

Target Selection and Validation of DESI Quasars

The Dark Energy Spectroscopic Instrument (DESI) survey will measure large-scale structures using quasars as direct tracers of dark matter in the redshift range 0.9 < z < 2.1 and using Lyα forests in quasar spectra at z > 2.1. We present several methods to select candidate quasars for DESI, using input photometric imaging in three optical bands (g, r, z) from the DESI Legacy Imaging Surveys and two infrared bands (W1, W2) from the Wide-field Infrared Survey Explorer. These methods were extensively tested during the Survey Validation of DESI. In this paper, we report on the results obtained with the different methods and present the selection we optimized for the DESI main survey. The final quasar target selection is based on a random forest algorithm and selects quasars in the magnitude range of 16.5 < r < 23. Visual selection of ultra-deep observations indicates that the main selection consists of 71% quasars, 16% galaxies, 6% stars, and 7% inconclusive spectra. Using the spectra based on this selection, we build an automated quasar catalog that achieves a fraction of true QSOs higher than 99% for a nominal effective exposure time of ~1000 s. With a 310 deg -2 target density, the main selection allows DESI to select more than 200 deg -2 quasars (including 60 deg -2 quasars with z > 2.1), exceeding the project requirements by 20%. The redshift distribution of the selected quasars is in excellent agreement with quasar luminosity function predictions.

79 ASTRONOMY AND ASTROPHYSICS↗

Phase transformations upon doping in WO 3

High levels of doping in WO 3 have been experimentally observed to lead to structural transformation towards higher symmetry phases. In this paper, we explore the structural phase diagram with charge doping through first-principles methods based on hybrid density functional theory, as a function of doping the room-temperature monoclinic phase transitions to the orthorhombic, tetragonal, and finally cubic phase. Finally, based on a decomposition of energies into electronic and strain contributions, we attribute the transformation to a gain in energy resulting from a lowering of the conduction band on an absolute energy scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Large half-metallic gap in ferromagnetic semi-Heusler alloys CoCrP and CoCrAs

We investigate the electronic structure and magnetism of semi-Heusler alloys CoCrP and CoCrAs using the full-potential linearized augmented plane wave method. The calculations reveal that CoCrP and CoCrAs are half-metallic (HM) ferromagnets with the same magnetic moment of 2.00 {mu}{sub B} per formula unit. Both alloys have large half-metallic gaps (up to 0.50 eV) and wide band gaps (above 1 eV). The half-metallicity of CoCrP and CoCrAs can be retained even when their lattice constants are changed by -4.8% to 6.6% and -7.7% to 4.5%, respectively. The two alloys show great promise in the applications of spin valve and magnetic tunnel junction.

36 MATERIALS SCIENCE↗

Probing asymmetric structures in the outskirts of galaxies

Upcoming large imaging surveys will allow detailed studies of the structure and morphology of galaxies aimed at addressing how galaxies form and evolve. Computational approaches are needed to characterize their morphologies over large samples. We introduce an automatic method to quantify the outer structure of galaxies. The key to our approach is the division of a galaxy image into two sections delineated by the isophote, which encloses half the total brightness of the galaxy. We call the central section the inner half-flux region (IHR) and the outer section the outer half-flux region (OHR). From this division, we derive two parameters: A {sub o}, which measures the asymmetry of the OHR, and D {sub o}, which measures the deviation of the intensity weighted centroid of the OHR from that of the IHR relative to the effective radius. We derive the two parameters from HST/ACS z {sub 850}-band images for a sample of 764 galaxies with z {sub 850} < 22 mag and 0.35 < z < 0.9 selected from the GEMS and GOODS-South surveys. We show that the sample galaxies having strong asymmetric structures, particularly tidal tails, are well-separated from those with regular morphologies in the A {sub o}-D {sub o} space. Meanwhile, the widely used CAS and Gini-M {sub 20} methods turn out to be insensitive to such morphological features. We stress that the A {sub o}-D {sub o} method is an efficient way to select galaxies with significant asymmetric features like tidal tails and study galaxy mergers in the dynamical phase traced by these delicate features.

79 ASTRONOMY AND ASTROPHYSICS↗

STRUCTURE AND PROPERTIES STUDY ON ENERGY MATERIALS: THERMOELECTRIC MATERIAL TETRAHEDRITE AND LITHIUM ION CONDUCTOR LiPON

Development of efficient energy materials is critical in order to ease the energy demand and reduce our dependence of fossil fuel. Thermoelectric materials are promising due to their capability of generating electrical power by recovering waste heat. The performance of thermoelectric materials is quantified by a dimensionless figure of merit zT, which depends on their properties such as electrical conductivity, Seebeck coefficient and thermal conductivity. Tetrahedrites, a copper antimony sulfosalt mineral, typified by Cu12-xMxSb4S13, where M is a transition metal element such as Ni, Zn, Fe or Mn, have great potential for thermoelectric application due to their relatively high zT (close to 1 at 700 K), earth-abundance, environmental friendliness, favorable electrical properties, and most importantly intrinsic low lattice thermal conductivity (less than 1 W m-1 K-1) in wide temperature. In addition to energy recovery, reliable energy storage devices are also emerging to relieve the energy demand and improve the efficiency of consuming energy resources. Lithium-ion batteries are known to be reliable and successful electrochemical energy storage devices and appliable in various aspects, including laptops, smartphones and electrical vehicles. Lithium phosphorous oxynitride (LiPON) are widely used as thin-film solid-state electrolytes in Li-ion battery, which is the only demonstrated solid-state electrolyte that is quite stable in direct contact with Li metal at potentials from 0-5 V. However, the structure of LiPON, the effects of N doping, and the origin of its good electrochemical stability remains inconclusive.In this thesis, reliable modeling techniques accompanied with experimental tools, are applied to study the thermoelectric material tetrahedrite and the ionic conductor LiPON, in order to study their structural and dynamical properties. Accurate and efficient density-functional theory (DFT) and density-functional tight-binding (DFTB) methods, combined with molecular dynamics (MD) simulations are utilized in order to investigate the structures and properties of these energy materials. The incoherent and coherent atomic dynamics study of tetrahedrite Cu10.5NiZn0.5Sb4S13 provides the origin of softening upon cooling by investigate the motion of Cu12e at different temperatures. The dynamic structure factors in the longitudinal and transverse direction will also be discussed. The Cu movement of Cu-rich tetrahedrite Cu14Sb4S13 is revealed by Cu self-diffusivity, nuclear density map and "nudged elastic band" (NEB). Moreover, we investigate the effect of simulation cell size and basis sets on the DFT-based MD simulation results using tetrahedrite Cu10Zn2Sb4S13 thermoelectric as a model material, showing the advantage of larger cell by accessing smaller Q range. In addition, the low-temperature structural properties of Cu12Sb4S13 is measured by neutron diffraction, which indicates that no cubic to tetragonal transition occurs at metal-semiconductor transition (MST) temperature. Thermoelectric properties such as Seebeck coefficient, electrical resistivity and electrical thermal conductivity will also be investigated. DFTB method is implemented to study the structure and transport properties of Li3PO4 and LiPON, while the exploration of N doping effect is included. Lastly, the LiPON/Li interphase will be revealed in order to study the origin of electrochemical stability

25 ENERGY STORAGE↗

Electronic and structural properties of ultrathin tungsten nanowires and nanotubes by density functional theory calculation

The simulated annealing basin-hopping method incorporating the penalty function was used to predict the lowest-energy structures for ultrathin tungsten nanowires and nanotubes of different sizes. These predicted structures indicate that tungsten one-dimensional structures at this small scale do not possess B.C.C. configuration as in bulk tungsten material. In order to analyze the relationship between multi-shell geometries and electronic transfer, the electronic and structural properties of tungsten wires and tubes including partial density of state and band structures which were determined and analyzed by quantum chemistry calculations. In addition, in order to understand the application feasibility of these nanowires and tubes on nano-devices such as field emitters or chemical catalysts, the electronic stability of these ultrathin tungsten nanowires was also investigated by density functional theory calculations.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DFT calculations on spectroscopic and structural properties of a NLO chromophore

The molecular geometry optimization, vibrational frequencies and gauge including atomic orbital (GIAO) {sup 1}H and {sup 13}C NMR chemical shift values of 2-(1′-(4’’’-Methoxyphenyl)-5′-(thien-2″-yl)pyrrol-2′-yl)-1,3-benzothiazole as potential nonlinear optical (NLO) material were calculated using density functional theory (DFT) HSEh1PBE method with 6–311G(d,p) basis set. The best of our knowledge, this study have not been reported to date. Additionally, a detailed vibrational study was performed on the basis of potential energy distribution (PED) using VEDA program. It is noteworthy that NMR chemical shifts are quite useful for understanding the relationship between the molecular structure and electronic properties of molecules. The computed IR and NMR spectra were used to determine the types of the experimental bands observed. Predicted values of structural and spectroscopic parameters of the chromophore were compared with each other so as to display the effects of the different substituents on the spectroscopic and structural properties. Obtained data showed that there is an agreement between the predicted and experimental data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗