Search NASA⌕ Search

SEARCH · Search NASA

Results for “Cartesian”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

An atlas of upper tropospheric radiances observed in the 6 to 7-micrometer water vapor band using TOVS data from the NOAA weather satellites during 1979-1991

This document is a pictorial atlas of the Earth's radiance emitted in the 6 to 7 micro-m water vapor band. At these wavelengths, the infrared brightness temperature corresponds to the layer-average temperature of the top few millimeters of water vapor in the atmosphere. At low altitudes, bright regions are dry slots in the upper troposphere. The satellite observations were obtained from NOAA's cloud and angle corrected measurements made by a series of polar orbiting TOVS (TIROS Operational Vertical Sounder) instruments flown from 1979 to 1991. TOVS 6.7 micro-m and 7.2 micro-m channels were converted to a single brightness temperature that simulates a high altitude channel near '6.5' micro-m. For climatological studies, the daily '6.5' micro-m overpass data were gridded to a cartesian projection with 5 by 5 degree horizontal resolution between 40 degrees N and 40 degrees S latitude. This atlas presents greyscale images of the '6.5' micro-m brightness fields for every day in every month for 13 years. The mean brightness for each of the 12 months for 13 years is presented to display interannual variability, and the annual cycle of 12 monthly means is summarized on a single page. Statistical summaries are presented from other investigations in progress.

Chesters, Dennis↗

Kinematics of an in-parallel actuated manipulator based on the Stewart platform mechanism

This paper presents kinematic equations and solutions for an in-parallel actuated robotic mechanism based on Stewart's platform. These equations are required for inverse position and resolved rate (inverse velocity) platform control. NASA LaRC has a Vehicle Emulator System (VES) platform designed by MIT which is based on Stewart's platform. The inverse position solution is straight-forward and computationally inexpensive. Given the desired position and orientation of the moving platform with respect to the base, the lengths of the prismatic leg actuators are calculated. The forward position solution is more complicated and theoretically has 16 solutions. The position and orientation of the moving platform with respect to the base is calculated given the leg actuator lengths. Two methods are pursued in this paper to solve this problem. The resolved rate (inverse velocity) solution is derived. Given the desired Cartesian velocity of the end-effector, the required leg actuator rates are calculated. The Newton-Raphson Jacobian matrix resulting from the second forward position kinematics solution is a modified inverse Jacobian matrix. Examples and simulations are given for the VES.

Williams, Robert L., II↗

A Numerical Method for Direct Simulation of Turbulence in Complex Geometries

The ultimate goal of this work is to study the flow inside a channel with riblets on one of the two walls. The method has been tested for two dimensional flows in the presence of bodies with a geometrical singularity and for three dimensional flows inside domains described by Cartesian coordinates. The results have been compared with previous numerical simulations and with experimental results. The cases considered are: (1) the growth of Orr-Sommerfield waves in plane Poiseulle flow; (2) the flow over a backward facing step; (3) the flow past a wedge; and (4) the flow inside a narrow channel. Finally, the case of a channel with two large riblets on a wall has been simulated. In this case a limited number of grid points is sufficient, and in spite of the slow convergence for the pressure solver, one is able to obtain solutions with a reasonable amount of computer time. At present solutions with very fine grids in all three directions can not be obtained, due to lack of a fast pressure solver for general curvilinear coordinates.

P Orlandi↗

Finite difference time domain modeling of steady state scattering from jet engines with moving turbine blades

The approach chosen to model steady state scattering from jet engines with moving turbine blades is based upon the Finite Difference Time Domain (FDTD) method. The FDTD method is a numerical electromagnetic program based upon the direct solution in the time domain of Maxwell's time dependent curl equations throughout a volume. One of the strengths of this method is the ability to model objects with complicated shape and/or material composition. General time domain functions may be used as source excitations. For example, a plane wave excitation may be specified as a pulse containing many frequencies and at any incidence angle to the scatterer. A best fit to the scatterer is accomplished using cubical cells in the standard cartesian implementation of the FDTD method. The material composition of the scatterer is determined by specifying its electrical properties at each cell on the scatterer. Thus, the FDTD method is a suitable choice for problems with complex geometries evaluated at multiple frequencies. It is assumed that the reader is familiar with the FDTD method.

Ryan, Deirdre A.↗

Minimization of deviations of gear real tooth surfaces determined by coordinate measurements

The deviations of a gear's real tooth surface from the theoretical surface are determined by coordinate measurements at the grid of the surface. A method was developed to transform the deviations from Cartesian coordinates to those along the normal at the measurement locations. Equations are derived that relate the first order deviations with the adjustment to the manufacturing machine-tool settings. The deviations of the entire surface are minimized. The minimization is achieved by application of the least-square method for an overdetermined system of linear equations. The proposed method is illustrated with a numerical example for hypoid gear and pinion.

Litvin, F. L.↗

Adaptive impedance control of redundant manipulators

A scheme for controlling the mechanical impedance of the end-effector of a kinematically redundant manipulator is presented. The proposed control system consists of two subsystems: an adaptive impedance controller which generates the Cartesian-space control input F (is a member of Rm) required to provide the desired end-effector impedance characteristics, and an algorithm that maps this control input to the joint torque T (is a member of Rn). The F to T map is constructed so that the robot redundancy is utilized to improve either the kinematic or dynamic performance of the robot. The impedance controller does not require knowledge of the complex robot dynamic model or parameter values for the robot, the payload, or the environment, and is implemented without calculation of the robot inverse kinematic transformation. As a result, the scheme is very general and is computationally efficient for on-line implementation.

Colbaugh, R.↗

Steady-state thermal-solutal convection and diffusion in a simulated float zone

Models describing the steady-state thermal diffusion in a pure system, the thermal-solutal diffusion in a binary system, and heat and momentum transverse in a pure system are presented. The geometry of the model is described by a 2D Cartesian coordinate system that is applicable for crystal sheets. The melting, solidifying, and melt/gas interfacial shapes as well as the thermal, flow, and solutal profiles are analytically evaluated as functions of the heat and ambient temperature profiles and material properties. The solution procedure involves a coupled asymptotic/numerical approach which reduces the coupled set of partial differential equations to ordinary type. The results should be applicable in situations where melt flows are not intense enough to change the thermal field in pure systems, or where the physical properties of the melt are such that the convective field is decoupled from the thermal field, the latter being established primarily by diffusion.

Young, G. W.↗

Effect of nose shape on three-dimensional stagnation region streamlines and heating rates

A new method for calculating the three-dimensional inviscid surface streamlines and streamline metrics using Cartesian coordinates and time as the independent variable of integration has been developed. The technique calculates the streamline from a specified point on the body to a point near the stagnation point by using a prescribed pressure distribution in the Euler equations. The differential equations, which are singular at the stagnation point, are of the two point boundary value problem type. Laminar heating rates are calculated using the axisymmetric analog concept for three-dimensional boundary layers and approximate solutions to the axisymmetric boundary layer equations. Results for elliptic conic forebody geometries show that location of the point of maximum heating depends on the type of conic in the plane of symmetry and the angle of attack, and that this location is in general different from the stagnation point. The new method was found to give smooth predictions of heat transfer in the nose region where previous methods gave oscillatory results.

Hassan, Basil↗

Klein-Gordon equation and reflection of Alfven waves in nonuniform media

A new analytical approach is presented for assessing the reflection of linear Alfven waves in smoothly nonuniform media. The general one-dimensional case in Cartesian coordinates is treated. It is shown that the wave equations, upon transformation into the form of the Klein-Gordon equation, display a local critical frequency for reflection. At any location in the medium, reflection becomes strong as the wave frequency descends past this characteristic frequency set by the local nonuniformity of the medium. This critical frequecy is given by the transformation as an explicit function of the Alfven velocity and its first and second derivatives, and hence as an explicit spatial function. The transformation thus directly yields, without solution of the wave equations, the location in the medium at which an Alfven wave of any given frequency becomes strongly reflected and has its propagation practically cut off.

Musielak, Z. E.↗

Geoid anomalies and dynamic topography from convection in cylindrical geometry - Applications to mantle plumes on earth and Venus

A variety of evidence suggests that at least some hotspots are formed by quasi-cylindrical mantle plumes upwelling from deep in the mantle. Such plumes are modeled in cylindrical, axisymmetric geometry with depth-dependent, Newtonian viscosity. Cylindrical and sheet-like, Cartesian upwellings have significantly different geoid and topography signatures. However, Rayleigh number-Nusselt number systematics in the two geometries are quite similar. The geoid anomaly and topographic uplift over a plume are insensitive to the viscosity of the surface layer, provided that it is at least 1000 times the interior viscosity. Increasing the Rayleigh number or including a low-viscosity asthenosphere decreases the geoid anomaly and the topographic uplift associated with an upwelling plume.

Kiefer, Walter S.↗

Calculating satellite umbra/penumbra entry and exit positions and times

The problem of calculating earth satellite entry/exit positions and times through the earth's umbra and penumbra for elliptical satellite orbits is solved in closed form; i.e., without iteration, by reducing the problem to that of finding the roots of a quartic polynomial in a cartesian coordinate. Typical results from an algorithm constructed from the method are shown.

Mullins, Larry D.↗

Assessment of modern methods in numerical simulations of high speed flows

Results of extensive studies on CFD algorithms for 2D inviscid flows in Cartesian and body fitted coordinates geometries are reviewed. These studies represent part of an ongoing investigation of combustion instabilities involving the interactions of high-speed nonlinear acoustic waves. Four numerical methods for the treatment of high speed flows are compared, namely, Roe-Sweby TVD, Yee symmetric TVD; Osher-Chakravarthy TVD; and the Colella's multi-dimensional Godunov method.

Pindera, M. Z.↗

Numerical models for the collapse and fragmentation of centrally condensed molecular cloud cores

The gravitational collapse and fragmentation of centrally condensed molecular cloud cores are investigated using a new hydrodynamical code. The numerical scheme is second-order accurate and uses explicit finite difference methods to advance the fluid variables on a 3D Cartesian grid. Two initial power-law density profiles, rho varies as r exp -1 and rho varies as r exp -2, are considered, as well as two initial density perturbations in the azimuthal coordinate theta, rho-i - rho(1 + a cos 2theta) where a = 0.1 and 0.5. Fragmentation is found to be possible in these centrally condensed cores if the initial conditions also include differential rotation. Models which collapse with initial uniform rotation do not produce fragments. If molecular cloud cores are indeed centrally condensed, as suggested by observations of star-forming regions and by studies of ambipolar diffusion, then differential rotation may be a mechanism for producing binary protostars during gravitational collapse.

Myhill, Elizabeth A.↗

Teleoperator performance in simulated Solar Maximum Satellite repair

An investigation is conducted of the relative benefits of different teleoperator control modes in simulated space servicing. The simulation replicates part of the Solar Maximum EVA Satellite Repair (SMSR) mission of STS-13, in 1974. The formal experimental design and statistical analysis presented demonstrates that position control is superior for small workspace volume management. Quantitative studies demonstrate significant benefits of shared Cartesian control modes for contact tasks; good performance will require the systematic analysis and synthesis of man-machine systems.

Schenker, Paul S.↗

On an adaptive truss manipulator space crane concept

The paper describes an adaptive truss manipulator (ATM) space crane concept for in-space assembly and construction. The underlying mechanism of an ATM is that the batten members of the constituent octahedral modules are controllable in length. Through geometric transformations of the constituent modules, the basic manipulator functions such as articulation can be performed by the ATM. The mechanism can also provide deployment/retraction, high dexterity motion, and bracing operation. The advantages of an ATM over the conventional multijoint-multilink anthropomorphic manipulator are its compact stowage volume for in-space storage and mobility, deployment as needed, high dexterity in complex workspace, and high redundancy of the actuator function. The kinematic description of an ATM is formulated in the global cartesian coordinate system.

Chen, Gun-Shing↗

A computationally efficient error-based adaptive control scheme for kinematically redundant manipulators

A Cartesian-space control scheme is developed to control the motion of kinematically redundant manipulators with 7 degrees of freedom (DOF). The control scheme consists mainly of proportional-derivative (PD) controllers whose gains are adjusted by an adaptation law driven by the errors between the desired and actual trajectories. The adaptation law is derived using the concept of model reference adaptive control (MRAC) and Liapunov direct method under the assumption that the manipulator performs noncompliant and slowly-varying motions. The developed control scheme is computationally efficient because its implementation does not require the computation of the manipulator dynamics. Computer simulation performed to evaluate the control scheme performance is presented and discussed.

Nguyen, Charles C.↗

Minimum jerk trajectory planning for robotic manipulators

It has been experimentally verified that the jerk of the desired trajectory adversely affects the performance of the tracking control algorithms for robotic manipulators. In this paper, the reasons behind this effect are investigated, and an optimization problem that minimizes joint jerk over a prespecified Cartesian space trajectory is stated. The necessary conditions are derived, and a numerical algorithm is presented.

Kyriakopoulos, K. J.↗

Canonical transformations for space trajectory optimization

Canonical transformations are developed between the Cartesian coordinates, equinoctial elements, trajectory variables, and orbital elements for coplanar space trajectory optimization problems. The canonical transformations permit the state and adjoint or their solution, transversality conditions, the optimal control, and integrals of the motion, to be transformed between any of the common sets of coordinates for planar space trajectory optimization problems. Variations on the canonical transformations shown are straightforward to develop given the group properties of the canonical transformations.

Haissig, Christine M.↗