Search NASA⌕ Search

SEARCH · Search NASA

Results for “Cold working”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Liquid Oxygen (LO2) propellant conditioning concept testing

Marshall Space Flight Center (MSFC) and industry contractors have undertaken activities to develop a simplified liquid oxygen (LO2) propellant conditioning concept for future expendable launch vehicles. The objective of these activities is to reduce operations costs and timelines and to improve safety of these vehicles. The approach followed has been to identify novel concepts through system level studies and demonstrate the feasibility of these concepts through small-scale and full-scale testing. Testing will also provide data for design guidelines and validation of analytical models. Four different concepts are being investigated: no-bleed, low-bleed, use of a recirculation line, and helium (He) bubbling. This investigation is being done under a Joint Institutional Research and Development (JIRAD) program currently in effect between MSFC and General Dynamics Space Systems (GDSS). A full-scale test article, which is a facsimile of a propellant feed duct with an attached section to simulate heat input from a LO2 turbopump, will be tested at the Cold Flow Facility at MSFC's West Test Area. Liquid nitrogen (LN2), which has similar properties to LO2, will be used in place of LO2 for safety and budget reasons. Work to date includes design and fabrication of the test article, design of the test facility and initial fabrication, development of a test matrix and test procedures, initial predictions of test output, and heat leak calibration and heat exchanger tests on the test article. The tests for all propellant conditioning concepts will be conducted in the summer of 1993, with the final report completed by October, 1993.

Perry, Gretchen L. E.↗

Design, Development, Pre-Testing and Preparation for Full Scale Cold Testing of a System for Field Remediation of Vertical Pipe Units at the Hanford Site 618-10 Burial Grounds -12495

At the Hanford site, in the 1950's and 60's, radioactive waste materials, including Transuranic (TRU) wastes from a number of laboratories were stored in vertical pipe units (VPUs) in what are now the 618-10 and 618-11 burial grounds. Although the current physical condition of the VPUs is unknown, initial R and D studies had shown that in-ground size reduction and stabilization of VPU contents was feasible. This paper describes the R and D work and testing activities to validate the concept of in-ground size reduction and stabilization of VPU contents, and the design and pre-testing of major plant items and augering systems on full size simulated VPUs. The paper also describes the full size prototype equipment which will be used in full size cold testing of simulated VPUs off the Hanford site, to prove the equipment, develop operating procedures, and train operators prior to deployment on site. Safe and effective field remediation, removal and disposal of the VPUs in the 600 area are critical to the success of the River Corridor Closure Contract at the U.S. Department of Energy's Hanford Site. Safe and effective field remediation, removal and disposal of the VPUs in the 600 area are critical to the success of the River Corridor Closure Contract at the U.S. Department of Energy's Hanford Site. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Meeting the Challenges, Exceeding Expectations in Radioactive Liquid Waste Work - 18657

The Savannah River Site (SRS) is an 803-square kilometer (310-square mile) U.S. Department of Energy (DOE) site located near Aiken, South Carolina, encompassing parts of Aiken, Barnwell, and Allendale counties. SRS is a key industrial complex responsible for environmental stewardship, environmental cleanup, waste management, and disposition of nuclear materials. The Site was constructed in the early 1950's in support of the United States' Cold War efforts. In July 2009, the DOE began a new era by awarding a stand-alone contract to execute the Liquid Waste Mission at SRS. The Liquid Waste Contractor is responsible for all liquid waste operations, including waste management, disposition, and management of all liquid waste facilities at SRS, as well as operationally closing high-level waste tanks. Currently, there are 43 operational underground storage tanks containing approximately 132.5 million liters (35 million gallons) of radioactive waste. Before tanks can be closed, work involves removing, stabilizing, and disposing of high- and low-level radioactive waste from the tanks. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Cold-Flow Study of Low Frequency Pressure Instability in Hybrid Rocket Motors

Past experience with hybrid rockets has shown that certain motor operating conditions are conducive to the formation of low frequency pressure oscillations, or flow instabilities, within the motor. Both past and present work in the hybrid propulsion community acknowledges deficiencies in the understanding of such behavior, though it seems probable that the answer lies in an interaction between the flow dynamics and the combustion heat release. Knowledge of the fundamental flow dynamics is essential to the basic understanding of the overall stability problem. A first step in this direction was a study conducted at NASA Marshall Space Flight Center (MSFC), centered around a laboratory-scale two dimensional water flow model of a hybrid rocket motor. Principal objectives included: (1) visualization of flow and measurement of flow velocity distributions: (2) assessment of the importance of shear layer instabilities in driving motor pressure oscillations; (3) determination of the interactions between flow induced shear layers with the mainstream flow, the secondary (wall) throughflow, and solid boundaries; (4) investigation of the interactions between wall flow oscillations and the mainstream flow pressure distribution.

Jenkins, Rhonald M.↗

An evaluation of anti-oxidative protection for cells against atmospheric pressure cold plasma treatment

With the development of plasma medicine, safety issues are emerging as a serious concern. In this study, both intracellular (genetic engineering) and extracellular (scavengers) measures were tested in an effort to determine the best protection for cells against plasma-induced oxidative stress. All results of immediate reactive species detection, short term survival and long term proliferation, suggest that intracellular pathways are superior in reducing oxidative stress and cell death. This work provides a potential mechanism to enhance safety and identifies precautionary measures that should be taken in future clinical applications of plasmas.

60 APPLIED LIFE SCIENCES↗

Affordable Cold Climate Infill Housing with Hybrid Insulation Approach, Wyandotte, Michigan (Fact Sheet)

Even builders who are relatively new to energy-efficient construction can consistently reach a target whole house airtightness of 1.5 air changes per hour at 50 Pascals (ACH50) with high R-value enclosures that use a hybrid insulation approach. The City of Wyandotte, Michigan, started a construction program in 2010 to build affordable, energy-efficient homes on lots in existing neighborhoods. A goal of the program was to engage local builders in energy-efficient construction and be able to deliver the new houses for less than $100/ft2. By the end of 2012, approximately 25 new houses were built by five local builders under this program. To help builders consistently achieve the airtightness target, a local architect worked with researchers from Building Science Corporation, a U.S. Department of Energy Building America team, to develop a technology specification with several key pieces. A high R-value wall and roof assembly made use of 2 ?6 advanced framing and a hybrid insulation approach that included insulating sheathing to control thermal bridging and closed cell spray polyurethane foam insulation (ccSPF) for its airtightness and vapor control benefits. This approach allows the air barrier to be completed and tested before any finishing work occurs, ensuring that problems are spotted and corrected early in the construction process.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Few-Body Bound States and Resonances in Finite Volume

Since the pioneering work of Lüscher in the 1980s it is well known that considering quantum systems in finite volume, specifically, finite periodic boxes, can be used as a powerful computational tool to extract physical observables. While this formalism has been worked out in great detail in the two-body sector, much effort is currently being invested into deriving analogous relations for systems with more constituents. This work is relevant not only for nuclear physics, where lattice methods are now able to calculate few- and many-nucleon states, but also for other fields such as simulations of cold atoms. This article discusses recent progress regarding the extraction of few-body bound-state and resonance properties from finite-volume calculations of systems with an arbitrary number of constituents.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Collisional drag may lead to disappearance of wave-breaking phenomenon of lower hybrid oscillations

The inhomogeneity in the magnetic field in a cold electron-ion non-dissipative homogeneous plasma leads to the breaking of lower hybrid modes via phase mixing phenomenon [Maity et al. Phys. Plasmas 19, 102302 (2012)]. In this work, we show that an inclusion of collisional drag force in fluid equations may lead to the disappearance of the wave-breaking phenomenon of lower hybrid oscillations. The nonlinear analysis in Lagrangian variables provides an expression for a critical value of damping rate, above which spikes in the plasma density profile may disappear. The critical damping rate depends on the perturbation and magnetic field inhomogeneity amplitudes as well as the ratio of the magnetic field inhomogeneity and perturbation scale lengths.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Theory of ignition and burn propagation in inertial fusion implosions

A detailed analytic model is presented here to investigate the physics of burn propagation in inertially confined plasmas. The onset of ignition and burn propagation occurs when alpha heating of the hot spot causes rapid ablation of shell mass into the hot spot. This allows large energy gains to be achieved since most of the fuel mass is located in the shell. Here, we first present a comprehensive review of previous analytic models that have been used to describe the physics of hot-spot evolution and ignition; we then show that a proper description of a propagating burn wave requires a comprehensive model of hot spot and shell evolution that includes proper mass conservation in the shell, fusion reactivity, and fuel depletion. The analytic theory is in good agreement with detailed radiation-hydrodynamic simulations that predict the onset of burn propagation as occurring when the yield enhancement caused by alpha heating is between 15- and 25-fold, $f_α$ ~ 1.4, where $f_α$ = alpha energy deposited/hot-spot energy at bang time, and the hot-spot burnup fraction is approximately 2%. We show that the definition of ignition is not sensitive to the alpha-particle stopping power nor asymmetries provided that the absorbed fraction of alpha particles $θ_α$ is correctly accounted for. Finally, we use the results of 2-D simulations to show that even when $θ_α$ is small and unknown (as is true in hot spots with mid modes that have significant leakage of alpha particles into the surrounding cold bubbles), one can still relate the experimentally measureable parameter $\chi^{53}_α$ to the yield amplification and the burning-plasma parameter $Q^{\text{hs}}_α$ = alpha energy deposited/total input work delivered to the hot spot

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spatial profile of argon (1s 5 ) metastables in an electron beam generated plasma

Electron beams with an applied magnetic field generate a secondary cold plasma with a selective chemical composition, featuring low-energy ions and metastable species in the discharge periphery, ideal for low-damage plasma treatment of material substrates. In this work, we studied the plasma generated by an e-beam using a 4 kV voltage in a pure argon gas environment under a magnetic field of 150 G and in the pressure range of 25–90 mTorr. We measured the absolute spatial density profile of argon (1 s 5 ) metastables in an electron beam generated plasma by laser-induced fluorescence and found it to be of the order of 10 16 m −3 . The electron temperature and the electron density measured by a Langmuir probe were of the order of 10 16 m −3 and less than an eV respectively. Electron-impact quenching was identified as a significant loss mechanism for the Ar(1s 5 ) state, leading to the saturation of the metastable density at higher pressures. Outside the primary ionization region, the spatial distribution of argon metastables followed a linear diffusion profile, indicating negligible additional production in those regions.

EEDF↗

Novel challenges in tracking self-interacting dark matter subhalos

Cosmological N-body simulations are among the primary tools for studying structure formation in the Universe. Analyses of these simulations critically depend on accurately identifying and tracking dark matter subhalos over time. In recent years, several new algorithms have been developed to improve the accuracy and consistency of subhalo tracking in cold dark matter (CDM) simulations. These algorithms should be revisited in the context of new physics beyond gravity, which can modify the evolution and final properties of subhalo populations. In this work, we apply the particle-tracking-based subhalo finder Symfind to velocity-dependent self-interacting dark matter (SIDM) simulations with large cross section amplitudes to assess the performance of particle-tracking methods beyond the CDM paradigm. We find that the core-particle-tracking technique, which is key to the success of these algorithms in CDM, does not always yield accurate results in SIDM. In particular, the interplay between dark matter self-interactions and tidal stripping can cause the diffusion of core particles to larger radii, leading particle-tracking-based algorithms to prematurely lose track of SIDM subhalos. For massive core-expansion subhalos and core-collapse subhalos that experience close or repeated pericentric passages, a significant fraction of core particles can be lost, and particle-tracking-based finders such as Symfind offer no clear advantage over traditional methods that rely on identifying phase-space overdensities. On the other hand, for subhalos with large pericentric distances or fewer, more distant passages, Symfind tends to outperform. These differences depend sensitively on the cross section amplitude and turnover velocity of the underlying SIDM model. We therefore recommend a hybrid approach that leverages the strengths of both techniques to produce complete and robust catalogs of core-expansion and core-collapse SIDM subhalos.

cosmological simulations↗

State-selective electron capture in {sup 3}He{sup 2+} + He collisions at intermediate impact energies

In this work we have measured single-electron capture in collisions of {sup 3}He{sup 2+} projectiles incident on a helium target for energies of 13.3-100 keV/amu with the cold-target recoil-ion momentum spectroscopy setup implemented at the Centro Atomico Bariloche. State-selective single-capture cross sections were measured as a function of the impact energy. They were found to agree with previous existing data from the Frankfurt group, starting at the impact energy of 60 keV/amu; as well as with recent data, at 7.5 keV/amu, from the Lanzhou group. The present experimental results are also contrasted to the classical trajectory Monte Carlo method with dynamical screening.

74 ATOMIC AND MOLECULAR PHYSICS↗

Flex-PCB Quench Antenna Developments at FNAL

We report flexible printed-circuit-board-based quench antenna arrays have been developed at FNAL since 2017. They proved to be low-noise, low-cost, sensitive, and non-invasive sensors for quench characterization in superconducting magnets, having the potential to extend even to quench detection. Starting with applications of small area sensors of this type, we have explored feasibility for operations at high pressure, and have invested in multi-channel quench antenna arrays covering the complete area of the innermost magnet layer of the conductor. We've also tested and optimized sensor geometry and relative orientations to increase sensitivity and spatial resolution. Beyond developments of warm and cold bore antennas, we've progressed to concepts which attach quench antennas to the conductor surfaces of accelerator magnets. Multiple programs and projects at FNAL and collaborating institutions benefited from this work already and our plans target further extensions of capabilities and applicability of these devices. In this paper we present the logic behind the development steps taken so far, status of our work and direction of near-term research on quench antennas at Fermilab.

43 PARTICLE ACCELERATORS↗

Truly horizontal finite difference scheme in the WRF model FY18 Q1 Update

A main goal of the Wind Forecasting Improvement Project 2 (WFIP2) is to improve performance of the Weather Research and Forecasting (WRF) model over complex terrain. Two methods for improving model performance were outlined in the LLNL WFIP 2 annual operating plan. The first is modification to WRF’s horizontal finite difference scheme to utilize an improved numerical stencil. A second proposed model improvement is use of the immersed boundary method within the WRF model to facilitate improved simulations over complex terrain. In Q1, work focused on implementing an alternative finite difference scheme, with a deliverable of a project update. The alternative finite difference method was implemented for the temperature variable and shown to improve our selected test case, and recommendations are made to continue the work in Q2. In Q2 the focus should be on extending the method to additional model variables, mainly pressure, as well as to real test cases, such as the WFIP 2 cold pool test case. Additionally, use of the immersed boundary method will be pursed in Q2 and Q3, with a second project update due at the end of Q3.

17 WIND ENERGY↗

Cryogenic mirror analysis

Due to extraordinary distances scanned by modern telescopes, optical surfaces in such telescopes must be manufactured to unimaginable standards of perfection of a few thousandths of a centimeter. The detection of imperfections of less than 1/20 of a wavelength of light, for application in the building of the mirror for the Space Infrared Telescope Facility, was undertaken. Because the mirror must be kept very cold while in space, another factor comes into effect: cryogenics. The process to test a specific morror under cryogenic conditions is described; including the follow-up analysis accomplished through computer work. To better illustrate the process and analysis, a Pyrex Hex-Core mirror is followed through the process from the laser interferometry in the lab, to computer analysis via a computer program called FRINGE. This analysis via FRINGE is detailed.

Nagy, S.↗

The nature of interstellar/pre-cometary dust

During the past 15 years considerable progress in observational techniques has been achieved in the middle-infrared region (5000-500/cm, 2-20 microns), the region where most diagnostic molecular vibrations occur. Spectra of many different astronomical infrared sources, some deeply embedded in dark molecular clouds and others obscured only by dust in the diffuse interstellar medium are now available. These spectra provide a powerful probe, not only for the identification of interstellar molecules in both the gas and solid phases, but also of the physical and chemical conditions which prevail in these two very different domains. By comparing these spectra with laboratory spectra one can determine the composition and abundance of the icy material frozen on the cold (- 10K) dust in the dark interior of molecular clouds and of the hydrocarbon component of dust in the diffuse interstellar medium. As these are the building blocks of comets, the work described here also gives insight into the nature of comets.

Allamandola, Louis↗

The ionization length in plasmas with finite temperature ion sources

The ionization length is an important quantity which up to now has been precisely determined only in plasmas which assume that the ions are born at rest, i.e., in discharges known as 'cold ion-source' plasmas. Presented here are the results of our calculations of the ionization lengths in plasmas with an arbitrary ion source temperature. Harrison and Thompson (H and T) [Proc. Phys. Soc. 74, 145 (1959)] found the values of this quantity for the cases of several ion strength potential profiles in the well-known Tonks-Langmuir [Phys. Rev. 34, 876 (1929)] discharge, which is characterized by 'cold' ion temperature. This scenario is also known as the 'singular' ion-source discharge. The H and T analytic result covers cases of ion sources proportional to exp(betaPHI) with PHI the normalized plasma potential and beta=0,1,2 values, which correspond to particular physical scenarios. Many years following H and T's work, Bissell and Johnson (B and J) [Phys. Fluids 30, 779 (1987)] developed a model with the so-called 'warm' ion-source temperature, i.e., 'regular' ion source, under B and J's particular assumption that the ionization strength is proportional to the local electron density. However, it appears that B and J were not interested in determining the ionization length at all. The importance of this quantity to theoretical modeling was recognized by Riemann, who recently answered all the questions of the most advanced up-to-date plasma-sheath boundary theory with cold ions [K.-U. Riemann, Phys. Plasmas 13, 063508 (2006)] but still without the stiff warm ion-source case solution, which is highly resistant to solution via any available analytic method. The present article is an extension of H and T's results obtained for a single point only with ion source temperature T{sub n}=0 to arbitrary finite ion source temperatures. The approach applied in this work is based on the method recently developed by Kos et al. [Phys. Plasmas 16, 093503 (2009)].

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗