Search NASA⌕ Search

SEARCH · Search NASA

Results for “DIFFRACTION MODELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

A Quantitative Analysis of Room Temperature Recrystallization Kinetics in Electroplated Copper Films using High Resolution X-ray Diffraction

Time-resolved in situ x-ray diffraction measurements were used to study the room-temperature recrystallization kinetics of electroplated copper thin films with thicknesses between 400 and 1000 nm. The thinnest films exhibited limited recrystallization and subsequent growth of grains, while recrystallized grains in the thicker films grew until all as-plated microstructure was consumed. For all films, recrystallized grains that belonged to the majority texture component, <111>, started growing after the shortest incubation time. These grains exhibited volumetric growth until they achieved the film thickness. After this point the growth mode became planar, with the <111>-type grains growing in the plane of the film. Grains with the <111> direction normal to the film surface started growing after the <111>-type grains switched to planar growth. However, the planar growth of this texture component finished at the same time as the growth of the <111> grains. Profile fitting of the 111 peak permitted the separation of the diffraction signals from recrystallized and as-plated grain populations. The average strains in these two populations, calculated from the peak position of the corresponding {l_brace}111{r_brace} reflections, were different, indicating a heterogeneous stress state within this texture component. The increasing volume fraction of recrystallized <111> grains with time was monitored via the variation in the diffracted intensity. This variation could be represented by the Johnson-Mehl-Avrami-Kolmogorov model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optical Design in Phase-Space for the I13L X-Ray Imaging and Coherence Beamline at Diamond using XPHASY

I13L is a 250 m long beamline for imaging and coherent diffraction currently under construction at the Diamond Light Source. For modeling the beamline optics the phase-space based ray-tracing code XPHASY was developed, as general ray-tracing codes for x-rays do not easily allow studying the propagation of coherence along the beamline. In contrast to computational intensive wave-front propagation codes, which fully describe the propagation of a photon-beam along a beamline but obscure the impact of individual optical components onto the beamline performance, this code allows to quickly calculate the photon-beam propagation along the beamline and estimate the impact of individual components.In this paper we will discuss the optical design of the I13L coherence branch from the perspective of phase-space by using XPHASY. We will demonstrate how the phase-space representation of a photon-beam allows estimating the coherence length at any given position along the beamline. The impact of optical components on the coherence length and the effect of vibrations on the beamline performance will be discussed. The paper will demonstrate how the phase-space representation of photon-beams allows a more detailed insight into the optical performance of a coherence beamline than ray-tracing in real space.

43 PARTICLE ACCELERATORS↗

MS–STEM–FEM: A parallelized multi-slice fluctuation TEM simulation tool

Atomic configurations of glassy or amorphous materials containing medium-range order (MRO) may be identified by comparing fluctuation transmission electron microscopy (FTEM) measurements to FTEM simulations obtained using model configurations. Candidate model sizes have traditionally been much thinner than the samples measured experimentally, and publicly available FTEM simulation software has until now omitted microscope parameters, dynamical scattering, and the phase of the diffracted electron wave. We introduce MS–STEM–FEM, an open-source software package for simulating FTEM experiments using established multi-slice TEM simulation techniques to emulate experiment more closely by incorporating microscope parameters and simulating electron scattering and propagation as a complex valued wave. Simulations using established models are compared with results of experimental STEM–FEM to validate the software. Several statistical measures of diffraction are implemented and their responses to model features are compared. Dynamical scattering is found to be less influential than the variety of crystallite orientations which occur in thicker models. Simulations of variable resolution microscopy confirm that cumulative intensity of the FTEM signal decreases with reduced model MRO and increased coherence volume. In conclusion, advantageous model scaling characteristics and efficient processor performance scaling are demonstrated, along with a study of convergence with respect to pertinent simulation parameters to identify accuracy requirements.

36 MATERIALS SCIENCE↗

Structure and reactivity of the calcite–water interface

The zetapotential of calcite in contact with aqueous solutions of varying composition is determined for pre-equilibrated suspensions by means of electrophoretic measurements and for non-equilibrium solutions by means of streaming potential measurements. Carbonate and calcium are identified as charge determining ions. Studies of the equilibrium solutions show a shift of isoelectric point with changing CO 2 partial pressure. Changes in pH have only a weak effect in non–equilibrium solutions. The surface structure of (104) faces of single crystal calcite in contact to solutions corresponding to those of the zetapotential investigations is determined from surface diffraction measurements. The results reveal no direct indication of calcium or carbonate inner-sphere surface species. The surface ions are found to relax only slightly from their bulk positions; the most significant relaxation is a ~4° tilt of the surface carbonate ions towards the surface. Two ordered layers of water molecules are identified, the first at 2.35 ± 0.05 Å above surface calcium ions and the second layer at 3.24 ± 0.06 Å above the surface associated with surface carbonate ions. A Basic Stern surface complexation model is developed to model observed zetapotentials, while only considering outer–sphere complexes of ions other than protons and hydroxide. The Basic Stern SCM successfully reproduces the zetapotential data and gives reasonable values for the inner Helmholtz capacitance, which are in line with the Stern layer thickness estimated from surface diffraction results.

58 GEOSCIENCES↗

Electron- and light-induced stimulated Raman spectroscopy for nanoscale molecular mapping

We propose and theoretically analyze a new vibrational spectroscopy, termed electron- and light-induced stimulated Raman (ELISR) scattering, that combines the high spatial resolution of elec-tron microscopy with the molecular sensitivity of surface-enhanced Raman spectroscopy. WithELISR, electron-beam excitation of plasmonic nanoparticles is utilized as a spectrally-broadband butspatially-confined Stokes beam in the presence of a diffraction-limited pump laser. To characterizethis technique, we develop a numerical model and conduct full-field electromagnetic simulations toinvestigate two distinct nanoparticle geometries, nanorods and nanospheres, coated with a Raman-active material. Our results show the significant (10 6 -10 7 ) stimulated Raman enhancement that isachieved with dual electron and optical excitation of thesenanoparticle geometries. Importantly,the spatial resolution of this vibrational spectroscopy for electron microscopy is solely determinedby the nanoparticle geometry and the plasmon mode volume. Our results highlight the promiseof ELISR for simultaneous high-resolution electron microscopy with sub-diffraction-limited Ramanspectroscopy, complementing advances in superresolutionmicroscopy, correlated light and electronmicroscopy, and vibrational electron energy loss spectroscopy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of thickness and Ti interlayers on stresses and texture transformations in thin Ag films during thermal cycling

The driving forces for the (111) to (100) texture transformation often observed during annealing of thin face-centered cubic metal films were investigated. Thin passivated silver films were produced with and without Ti adhesion layers. Stresses were measured in situ during heating to induce the texture transformation, and the texture was characterized using x-ray diffraction. Sufficiently thin films did not transform and sufficiently thick films transformed fully. Intermediate thickness films transformed to an extent dependent on thickness, leading to stable mixed textures. In the prevailing thermodynamic model, texture transformation is attributed to minimization of strain and interface energies. However, calculations using the measured stresses, known elastic constants, and estimated interface energies in this model reveal that the stresses are not sufficient to cause the texture transformation and, furthermore, that variations in interface energy cannot lead to the observed behavior. The results suggest that neither the interface energy nor the stress plays decisive roles in the texture transformation.

36 MATERIALS SCIENCE↗

Cu site differentiation in tetracopper(I) sulfide clusters enables biomimetic N 2 O reduction

Copper clusters feature prominently in both metalloenzymes and synthetic nanoclusters that mediate catalytic redox transformations of gaseous small molecules. Such reactions are critical to biological energy conversion and are expected to be crucial parts of renewable energy economies. However, the precise roles of individual metal atoms within clusters are difficult to elucidate, particularly for cluster systems that are dynamic under operating conditions. Here, we present a metal site-specific analysis of synthetic Cu 4 (μ 4 -S) clusters that mimic the Cu Z active site of the nitrous oxide reductase enzyme. Leveraging the ability to obtain structural snapshots of both inactive and active forms of the synthetic model system, we analyzed both states using resonant X-ray diffraction anomalous fine structure (DAFS), a technique that enables X-ray absorption profiles of individual metal sites within a cluster to be extracted independently. Using DAFS, we found that a change in cluster geometry between the inactive and active states is correlated to Cu site differentiation that is presumably required for efficient activation of N 2 O gas. More precisely, we hypothesize that the Cu δ+ ∙∙∙Cu δ- pairs produced upon site differentiation are poised for N 2 O activation, as supported by computational modeling. These results provide an unprecedented level of detail on the roles of individual metal sites within the synthetic cluster system and how those roles interplay with cluster geometry to impact the reactivity function. We expect this fundamental knowledge to inform understanding of metal clusters in settings ranging from (bio)molecular to nanocluster to extended solid systems involved in energy conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanisms in Knockout Reactions

We report the first detailed study of the relative importance of the stripping and diffraction mechanisms involved in nucleon knockout reactions, by the use of a coincidence measurement of the residue and fast proton following one-proton knockout reactions. The measurements used the S800 spectrograph in combination with the HiRA detector array at the NSCL. Results for the reactions {sup 9}Be({sup 9}C,{sup 8}B+X)Y and {sup 9}Be({sup 8}B,{sup 7}Be+X)Y are presented and compared with theoretical predictions for the two reaction mechanisms calculated using the eikonal model. The data show a clear distinction between the stripping and diffraction mechanisms and the measured relative proportions are very well reproduced by the reaction theory. This agreement adds support to the results of knockout reaction analyses and their applications to the spectroscopy of rare isotopes.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Disorder and hydrogenation in graphene nanopowder revealed by complementary X-ray and neutron scattering

Functionalization of graphene's two-dimensional sheets can be used to modify the physical properties of graphene, such as changing its conductivity or inducing ferromagnetism, which is of broad interest for a myriad of applications. However, functionalized graphene can possess significant structural disorder that is often overlooked and is difficult to characterize quantitatively. Here we investigate hydrogenated graphene nanopowder (H-Gr) produced by Birch reduction of graphene oxide. By combining complementary x-ray and neutron diffraction, we show how to quantitatively characterize the H-Gr nanostructure, including the hydrogen content. Further, we show that the majority of the H-Gr consists of highly disordered molecular-scale carbon while a small portion of the sample contains few-layered graphene having an expanded interlayer spacing. Modeling the coherent diffuse scattering for both x-ray and neutron diffraction, and comparing it with the incoherent neutron scattering, the hydrogen to carbon ratio was measured and it was determined that most of the hydrogen resides within the disordered carbon rather than in the graphene. Evidence is presented for hydrogen clustering as well as for hydrogen bonded perpendicular to the plane of molecular-carbon bonds. Our quantitative approach to characterizing carbon nanopowders has broad relevance to understanding disorder and bonding of hydrogen in graphitic carbons and other nanomaterials.

36 MATERIALS SCIENCE↗

RCrane: semi-automated RNA model building

RCrane is a new tool for the partially automated building of RNA crystallographic models into electron-density maps of low or intermediate resolution. This tool helps crystallographers to place phosphates and bases into electron density and then automatically predicts and builds the detailed all-atom structure of the traced nucleotides. RNA crystals typically diffract to much lower resolutions than protein crystals. This low-resolution diffraction results in unclear density maps, which cause considerable difficulties during the model-building process. These difficulties are exacerbated by the lack of computational tools for RNA modeling. Here, RCrane, a tool for the partially automated building of RNA into electron-density maps of low or intermediate resolution, is presented. This tool works within Coot, a common program for macromolecular model building. RCrane helps crystallographers to place phosphates and bases into electron density and then automatically predicts and builds the detailed all-atom structure of the traced nucleotides. RCrane then allows the crystallographer to review the newly built structure and select alternative backbone conformations where desired. This tool can also be used to automatically correct the backbone structure of previously built nucleotides. These automated corrections can fix incorrect sugar puckers, steric clashes and other structural problems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Complete the Design of Benchtop Fiber-Optic Based Photo-Thermal Radiometry System

Thermal transport properties of nuclear fuels, i.e., thermal conductivity and diffusivity, are critical parameters in the thermal design of a nuclear reactor. It is well known that thermal transport properties change temporally and spatially due to dynamic microstructural evolution as a result of neutron irradiation. A real-time instrument to monitor the local thermal property change, which can survive the harsh in-pile environment, will give researchers unprecedented access to fuel behavior during irradiation. Laser-based photothermal techniques are an ideal candidate to accomplish this specific task, because of the remote, non-contact, and non-destructive features. In this report, we present the progress in the development of a bench-top photothermal radiometry (PTR) system to measure the thermal diffusivity of solid samples, and the preliminary design of a fiber-based PTR instrument to measure the real-time, in-pile thermal diffusivity of nuclear fuels. The PTR technique measures the local temperature response from a modulated heat source by detecting the sample radiation heat flux. Initially a well-developed thermal wave analytical model was fit to the data to obtain the thermal diffusivity. However, systematic errors from the diffraction effect and non-linearity issues resulted in thermal diffusivity measurements higher than literature values. These effects have been studied and an improved analytical model has been developed, and the physics behind the phenomena are still under investigation. A procedure for optimizing measurements from the bench-top system has been provided. The experiences from the bench top measurement were then used to guide the fiber-based system.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Superconducting and structural properties of {delta}-MoC{sub 0.681} cubic molybdenum carbide phase

The superconducting and lattice properties of {delta}-MoC{sub 0.681} were studied by electromagnetic measurements, synchrotron X-ray diffraction, neutron diffraction, and electron diffraction. The superconducting properties (T{sub c}=12 K) of {delta}-MoC{sub 0.681} were well characterized by a weak coupling model. The carbon vacancies present in the host cubic structure were found to be robust, although the material was synthesized from stoichiometric carbon and Mo powder under a high-pressure of 6 GPa. A thermodynamically-stable structure with ordered vacancies did not account for the robust features of {delta}-MoC{sub 0.681} since the vacancies are unlikely to be ordered in long range in the host structure. A model based on inherent phonon instability theoretically predicted for a stoichiometric MoC phase might be responsible for the robust features of {delta}-MoC{sub 0.681}. - Graphical Abstract: The cubic molybdenum carbide shows an excellent superconductivity with robust carbon vacancies. Inherent phonon instability theoretically predicted for a stoichiometric MoC phase might be responsible for the vacancies rather than a thermodynamically-stable structure with vacancies ordering. Highlights: Black-Right-Pointing-Pointer The 12 K superconductivity is well characterized by a weakly coupling model. Black-Right-Pointing-Pointer Carbon vacancies are robust and disordered in the cubic host structure. Black-Right-Pointing-Pointer Inherent phonon instability might be responsible for the robust carbon vacancies in {delta}-MoC{sub 0.681}.

36 MATERIALS SCIENCE↗

Characterization of beryllium deformation using in-situ x-ray diffraction

Beryllium’s unique mechanical properties are extremely important in a number of high performance applications. Consequently, accurate models for the mechanical behavior of beryllium are required. However, current models are not sufficiently microstructure aware to accurately predict the performance of beryllium under a range of processing and loading conditions. Previous experiments conducted using the SMARTS and HIPPO instruments at the Lujan Center(LANL), have studied the relationship between strain rate and texture development, but due to the limitations of neutron diffraction studies, it was not possible to measure the response of the material in real-time. In-situ diffraction experiments conducted at the Advanced Photon Source have allowed the real time measurement of the mechanical response of compressed beryllium. Samples of pre-strained beryllium were reloaded orthogonal to their original load path to show the reorientation of already twinned grains. Additionally, the in-situ experiments allowed the real time tracking of twin evolution in beryllium strained at high rates. The data gathered during these experiments will be used in the development and validation of a new, microstructure aware model of the constitutive behavior of beryllium.

36 MATERIALS SCIENCE↗

Zinc ion coordination as a modulating factor of the ZnuA histidine-rich loop flexibility: A molecular modeling and fluorescence spectroscopy study

Highlights: Black-Right-Pointing-Pointer Fluorescence data indicate that the His-loop of ZnuA interacts with Zn{sup +2} ions. Black-Right-Pointing-Pointer The ZnuA structural model proposed validates these spectroscopic findings. Black-Right-Pointing-Pointer It is proposed that a zinc loaded His-loop may facilitate the ZnuA-ZnuB recognition. -- Abstract: ZnuA is the soluble component of the high-affinity ZnuABC zinc transporter belonging to the ATP-binding cassette-type periplasmic Zn-binding proteins. The zinc transporter ZnuABC is composed by three proteins: ZnuB, the membrane permease, ZnuC, the ATPase component and ZnuA, the soluble periplasmic metal-binding protein which captures Zn and delivers it to ZnuB. The ZnuA protein contains a charged flexible loop, rich in histidines and acidic residues, showing significant species-specific differences. Various studies have established that this loop contributes to the formation of a secondary zinc binding site, which has been proposed to be important in the acquisition of periplasmic Zn for its delivery to ZnuB or for regulation of zinc uptake. Due to its high mobility the structure of the histidine-rich loop has never been solved by X-ray diffraction studies. In this paper, through a combined use of molecular modeling, mutagenesis and fluorescence spectroscopy, we confirm the presence of two zinc binding sites characterized by different affinities for the metal ion and show that the flexibility of the loop is modulated by the binding of the zinc ions to the protein. The data obtained by fluorescence spectroscopy have then be used to validate a 3D model including the unsolved histidine-rich loop.

60 APPLIED LIFE SCIENCES↗

Structural Characterization of Loblolly Pine Derived Biochar by X-ray Diffraction and Electron Energy Loss Spectroscopy

Biochar from lignocellulosic biomass is emerging as a sustainable material with versatile applications, but its detailed properties are poorly understood because of its structural complexity. We propose a biochar structural development model based on experimental results including composition analysis, surface area and pore analysis, X-ray diffraction analysis, electron microscopy imaging, and electron energy loss spectroscopy. Loblolly pine derived biochars were produced at different carbonization temperatures between 300 to 1000 °C. Fixed carbon, sp 2 content, and number of graphene layers increased with increased carbonization temperature. Alternating average C–C bond length, interlayer spacing distance, and layer coherence length were observed. Bulk plasmon excitation energy was correlated to the average C–C bond length, and it serves as a good indicator of the carbon structure development when compared to the perfect graphitic carbon structure. On the basis of the experimental results, four different structural development phases are identified, which provide a comprehensive understanding of biochar nanocarbon crystallite development. Unlike previous biochar structure models, which proposed radially growing polyaromatic carbon crystallite, we propose a lengthwise growing polyaromatic carbon crystallite model. Furthermore, this experiment-based biochar model should be helpful when determining the structure of unknown biomass-derived carbon materials and disordered pyrolytic carbon materials.

Biomass carbonization↗

High speed turboprop aeroacoustic study (single rotation). Volume 1: Model development

A frequency-domain noncompact-source theory for the steady loading and volume-displacement (thickness) noise of high speed propellers has been developed and programmed. Both near field and far field effects have been considered. The code utilizes blade surface pressure distributions obtained from three-dimensional nonlinear aerodynamic flow field analysis programs as input for evaluating the steady loading noise. Simplified mathematical models of the velocity fields induced at the propeller disk by nearby wing and fuselage surfaces and by angle-of-attack operation have been developed to provide estimates of the unsteady loading imposed on the propeller by these potential field type interactions. These unsteady blade loadings have been coupled to a chordwise compact propeller unsteady loading noise model to provide predictions of unsteady loading noise caused by these installation effects. Finally, an analysis to estimate the corrections to be applied to the free-field noise predictions in order to arrive at the measurable fuselage sound pressure levels has been formulated and programmed. This analysis considers the effects of fuselage surface reflection and diffraction together with surface boundary layer refraction. The steady loading and thickness model and the unsteady loading model have been verified using NASA-supplied data for the SR-2 and SR-3 model propfans. In addition, the steady loading and thickness model has been compared with data from the SR-6 model propfan. These theoretical models have been employed in the evaluation of the SR-7 powered Gulfstream aircraft in terms of noise characteristics at representative takeoff, cruise, and approach operating conditions. In all cases, agreement between theory and experiment is encouraging.

Whitfield, C. E.↗

Elastic scattering of low energy electrons in partially ionized dense semiclassical plasma

Elastic scattering of electrons by hydrogen atoms in a dense semiclassical hydrogen plasma for low impact energies has been studied. Differential scattering cross sections were calculated within the effective model of electron-atom interaction taking into account the effect of screening as well as the quantum mechanical effect of diffraction. The calculations were carried out on the basis of the phase-function method. The influence of the diffraction effect on the Ramsauer–Townsend effect was studied on the basis of a comparison with results made within the effective polarization model of the Buckingham type.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗