Search NASA⌕ Search

SEARCH · Search NASA

Results for “Design Verification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Thermal acoustic oscillations, volume 2

A number of thermal acoustic oscillation phenomena and their effects on cryogenic systems were studied. The conditions which cause or suppress oscillations, the frequency, amplitude and intensity of oscillations when they exist, and the heat loss they induce are discussed. Methods of numerical analysis utilizing the digital computer were developed for use in cryogenic systems design. In addition, an experimental verification program was conducted to study oscillation wave characteristics and boiloff rate. The data were then reduced and compared with the analytical predictions.

Spradley, L. W.↗

Data resolution versus forestry classification and modeling

This paper examines the effects on timber stand computer classification accuracies caused by changes in the resolution of remotely sensed multispectral data. This investigation is valuable, especially for determining optimal sensor and platform designs. Theoretical justification and experimental verification support the finding that classification accuracies for low resolution data could be better than the accuracies for data with higher resolution. The increase in accuracy is constructed as due to the reduction of scene inhomogeneity at lower resolution. The computer classification scheme was a maximum likelihood classifier.

Kan, E. P.↗

Design and Development of the Space Shuttle Tail Service Masts

The successful launch of a space shuttle vehicle depends on the proper operation of two tail service masts (TSMs). Reliable TSM operation is assured through a comprehensive design, development, and testing program. The results of the concept verification test (CVT) and the resulting impact on prototype TSM design are presented. The design criteria are outlined, and the proposed prototype TSM tests are described.

Dandage, S. R.↗

Grazing incidence imaging telescope for X-ray astronomy using sounding rockets

A sounding rocket flight to image a point X-ray source and to determine the detector background characteristics in a space environment is evaluated. The verification of the HRI detector design in a flight environment is described. The environmental factors, including ambient neutral and charged particle densities, the electromagnetic radiation field, and the vibration and acceleration induced at launch, that affect the operations of the HRI are discussed.

Source record↗

Unique flight characteristics of the AD-1 oblique-wing research airplane

Flight characteristics associated with an oblique-wing airplane have been studied with limited scope and complexity using the AD-1 research vehicle. The AD-1 is a low-speed, low-cost, manned airplane with an aeroelastically tailored wing that can be pivoted 0 to 60 deg asymmetrically. Results of the flight tests include aerodynamic parameter extraction, verification of the aeroelastic wing design criteria, trim requirements, stall characteristics, and an evaluation of the handling qualities and basic control system requirements. Some of the unique characteristics of these results that pertain to the oblique-wing design are presented.

Curry, R. E.↗

The fault-tolerant multiprocessor computer

The development and evaluation of fault-tolerant computer architectures and software-implemented fault tolerance (SIFT) for use in advanced NASA vehicles and potentially in flight-control systems are described in a collection of previously published reports prepared for NASA. Topics addressed include the principles of fault-tolerant multiprocessor (FTMP) operation; processor and slave regional designs; FTMP executive, facilities, acceptance-test/diagnostic, applications, and support software; FTM reliability and availability models; SIFT hardware design; and SIFT validation and verification.

Smith, T. B., III↗

Analysis of nozzle lip and backflow expansion of a small hydrazine thruster

Results are presented for computations made with the direct simulation Monte Carlo method for the expansion of the thick boundary layer of a small nozzle. The objective in the investigation is to assess the boundary-layer characteristics that most affect the flow properties of the expanding gas. In the computations, large degrees of species separation and thermal nonequilibrium are observed as the gas expands around the nozzle lip. These aspects of the flow indicate the necessity of treating the problem through a discrete particle approach. Assessment is made of the sensitivity of the calculated results to the form of the boundary layer initially assumed. It is found that the amount of backflow is related to the flow temperature close to the wall. Therefore, the opportunity presents itself for the reduction of the impingement potential of such thrusters through appropriate design considerations. Experimental procedures for verification of the type of computations undertaken in the current study are discussed. It is proposed that the calculations made in the backflow region offer the best opportunity.

Boyd, Iain D.↗

The use of satellite altimetry in the study of weakly defined and variable oceanic gyres

Most of what is known about oceanic gyres comes from studies of the two main Northern Hemisphere subtropical gyres. Also important in the overall circulation of the world's oceans are the Southern Hemisphere subtropical gyres and the cyclonic Alaskan Gyre in the northern Pacific. Due in part to their weaker surface topography signatures and their variable character, these gyres have not been observed and studied as well as the northern subtropical gyres. The combination of satellite altimetry with in situ ocean measurements will lead to improved resolution of the interannual and seasonal change in the circulation of these ocean gyres. Also, it will provide initialization input and verification for numerical modeling work designed to better understand internal gyre dynamics. The objective of this proposal is to combine satellite and in situ data in a study dedicated to a better understanding of the basic structure and dynamics of the weakly defined Southern Hemisphere gyres and the Alaskan Gyre and their roles in oceanic heat and mass transport of the world ocean. Emphasis will be on description of the Alaskan Gyre.

Born, George H.↗

The design of a common lunar lander

The Austin Cynthesis Corporation was formed to respond to a Request for Proposal for the design of a Common Lunar Lander (CLL) capable of carrying lightweight (less than 500 kg), unspecified payload to the moon. This Final Design Report Document includes information on the requirements for the design project; the ideas proposed as solutions to the design problem; the work which has been completed in support of the design effort; justifications, validations, and verifications of decisions made during the project; and suggestions for future work to be done in support of the project. A project schedule, including current status of the items included on the schedule, as well as cost and management summaries is also included.

Driggers, Dan↗

Behavioral model simulation studies of an image compressor

The high initial cost of prototype Very Large Scaled Integrated (VLSI) parts requires that sufficient verifications be made to eliminate design errors before actually producing the prototypes. Logic simulation is the means by which the VLSI engineer can ensure that the design will function properly. The computer time required for logic simulation can be reduced through the use of behavioral models. Behavioral models, however, require time to write and verify and they do not always produce a dramatic speed up in logic simulation time. This paper presents a study of behavioral modeling aimed at discovering which circuit types benefit most from the use of behavioral models for logic simulation.

Madani, Navid↗

NDE Process Development Specification for SRB Composite Nose Cap

The Shuttle Upgrade program is a continuing improvement process to enable the Space Shuttle to be an effective space transportation vehicle for the next few decades. The Solid Rocket Booster (SRB), as a component of that system, is currently undergoing such an improvement. Advanced materials, such as composites, have given us a chance to improve performance and to reduce weight. The SRB Composite Nose Cap (CNC) program aims to replace the current aluminum nose cap, which is coated with a Thermal Protection System and poses a possible debris hazard, with a lighter, stronger, CNC. For the next 2 years, this program will evaluate the design, material selection, properties, and verification of the CNC. This particular process specification cites the methods and techniques for verifying the integrity of such a nose cap with nondestructive evaluation.

Suits, M.↗

NASA Ames Research Center R and D Services Directorate Biomedical Systems Development

The Ames Research Center R&D Services Directorate teams with NASA, other government agencies and/or industry investigators for the development, design, fabrication, manufacturing and qualification testing of space-flight and ground-based experiment hardware for biomedical and general aerospace applications. In recent years, biomedical research hardware and software has been developed to support space-flight and ground-based experiment needs including the E 132 Biotelemetry system for the Research Animal Holding Facility (RAHF), E 100 Neurolab neuro-vestibular investigation systems, the Autogenic Feedback Systems, and the Standard Interface Glove Box (SIGB) experiment workstation module. Centrifuges, motion simulators, habitat design, environmental control systems, and other unique experiment modules and fixtures have also been developed. A discussion of engineered systems and capabilities will be provided to promote understanding of possibilities for future system designs in biomedical applications. In addition, an overview of existing engineered products will be shown. Examples of hardware and literature that demonstrate the organization's capabilities will be displayed. The Ames Research Center R&D Services Directorate is available to support the development of new hardware and software systems or adaptation of existing systems to meet the needs of academic, commercial/industrial, and government research requirements. The Ames R&D Services Directorate can provide specialized support for: System concept definition and feasibility Mathematical modeling and simulation of system performance Prototype hardware development Hardware and software design Data acquisition systems Graphical user interface development Motion control design Hardware fabrication and high-fidelity machining Composite materials development and application design Electronic/electrical system design and fabrication System performance verification testing and qualification.

Pollitt, J.↗

Design and Integration of a Rotor Alone Nacelle for Acoustic Fan Testing

A brief summary of the design, integration and testing of a rotor alone nacelle (RAN) in NASA Glenn's 9'x 15' Low Speed Wind Tunnel (LSWT) is presented. The purpose of the RAN system was to provide an "acoustically clean" flow path within the nacelle to isolate that portion of the total engine system acoustic signature attributed to fan noise. The RAN design accomplished this by removing the stators that provided internal support to the nacelle. In its place, two external struts mounted to a two-axis positioning table located behind the tunnel wall provided the support. Nacelle-mounted lasers and a closed-loop control system provided the input to the table to maintain nacelle to fan concentricity as thermal and thrust loads displaced the strut-mounted fan. This unique design required extensive analysis and verification testing to ensure the safety of the fan model, propulsion simulator drive rig, and facility, along with experimental consistency of acoustic data obtained while using the RAN system. Initial testing was used to optimize the positioning system and resulted in concentricity errors of +/- 0.0031 in. in the horizontal direction and +0.0035/-0.0013 in, in the vertical direction. As a result of successful testing, the RAN system will be transitioned into other acoustic research programs at NASA Glenn Research Center.

Shook, Tony D.↗

Benchmark Tests for Stirling Convertor Heater Head Life Assessment Conducted

A new in-house test capability has been developed at the NASA Glenn Research Center, where a critical component of the Stirling Radioisotope Generator (SRG) is undergoing extensive testing to aid the development of analytical life prediction methodology and to experimentally aid in verification of the flight-design component's life. The new facility includes two test rigs that are performing creep testing of the SRG heater head pressure vessel test articles at design temperature and with wall stresses ranging from operating level to seven times that (see the following photograph).

Krause, David L.↗

Advanced Capabilities for Wind Tunnel Testing in the 21st Century

Wind tunnel testing methods and test technologies for the 21st century using advanced capabilities are presented. These capabilities are necessary to capture more accurate and high quality test results by eliminating the uncertainties in testing and to facilitate verification of computational tools for design. This paper discusses near term developments underway in ground testing capabilities, which will enhance the quality of information of both the test article and airstream flow details. Also discussed is a selection of new capability investments that have been made to accommodate such developments. Examples include advanced experimental methods for measuring the test gas itself; using efficient experiment methodologies, including quality assurance strategies within the test; and increasing test result information density by using extensive optical visualization together with computed flow field results. These points could be made for both major investments in existing tunnel capabilities or for entirely new capabilities.

Kegelman, Jerome T.↗

Human Factors Engineering Requirements for the International Space Station - Successes and Challenges

Advanced technology coupled with the desire to explore space has resulted in increasingly longer human space missions. Indeed, any exploration mission outside of Earth's neighborhood, in other words, beyond the moon, will necessarily be several months or even years. The International Space Station (ISS) serves as an important advancement toward executing a successful human space mission that is longer than a standard trip around the world or to the moon. The ISS, which is a permanently occupied microgravity research facility orbiting the earth, will support missions four to six months in duration. In planning for the ISS, the NASA developed an agency-wide set of human factors standards for the first time in a space exploration program. The Man-Systems Integration Standard (MSIS), NASA-STD-3000, a multi-volume set of guidelines for human-centered design in microgravity, was developed with the cooperation of human factors experts from various NASA centers, industry, academia, and other government agencies. The ISS program formed a human factors team analogous to any major engineering subsystem. This team develops and maintains the human factors requirements regarding end-to-end architecture design and performance, hardware and software design requirements, and test and verification requirements. It is also responsible for providing program integration across all of the larger scale elements, smaller scale hardware, and international partners.

Whitmore, M.↗

Spectroscopic Determination of Trace Contaminants in High Purity Oxygen

Oxygen used for extravehicular activities (EVA) must be free of contaminants because a difference in a few tenths of a percent of argon or nitrogen content can mean significant reduction in available EVA time. These inert gases build up in the extravehicular mobility unit because they are not metabolized or scrubbed from the atmosphere. Measurement of oxygen purity above 99.5% is problematic, and currently only complex instruments such as gas chromatographs or mass spectrometers are used for these determinations. Because liquid oxygen boil-off from the space shuttle will no longer be available to supply oxygen for EVA use, other concepts are being developed to produce and validate high purity oxygen from cabin air aboard the International Space Station. A prototype optical emission technique capable of detecting argon and nitrogen below 0.1% in oxygen was developed at White Sands Test Facility. This instrument uses a glow discharge in reduced pressure gas to produce atomic emission from the species present. Because the atomic emission lines from oxygen, nitrogen, and argon are discrete and in many cases well-separated, trace amounts of argon and nitrogen can be detected in the ultraviolet and visible spectrum. This is a straightforward, direct measurement of the target contaminants and may lend itself to a device capable of on-orbit verification of oxygen purity. System design and optimized measurement parameters are presented.

Hornung, Steven D.↗